NetBSD/sys/arch/hpcmips/vr/vrpmu.c

323 lines
8.3 KiB
C

/* $NetBSD: vrpmu.c,v 1.14 2002/01/29 18:53:22 uch Exp $ */
/*
* Copyright (c) 1999 M. Warner Losh. All rights reserved.
* Copyright (c) 2000 SATO Kazumi. All rights reserved.
* Copyright (c) 1999,2000 PocketBSD Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <machine/bus.h>
#include <machine/config_hook.h>
#include <machine/debug.h>
#include <hpcmips/vr/vripif.h>
#include <hpcmips/vr/vrpmuvar.h>
#include <hpcmips/vr/vrpmureg.h>
#include "vrbcu.h"
#if NVRBCU > 0
#include <hpcmips/vr/bcuvar.h>
#include <hpcmips/vr/bcureg.h>
#endif
#ifdef VRPMUDEBUG
#define DEBUG_BOOT 0x1 /* boot time */
#define DEBUG_INTR 0x2 /* intr */
#define DEBUG_IO 0x4 /* I/O */
#ifndef VRPMUDEBUG_CONF
#define VRPMUDEBUG_CONF 0
#endif /* VRPMUDEBUG_CONF */
int vrpmudebug = VRPMUDEBUG_CONF;
#define DPRINTF(flag, arg) if (vrpmudebug&flag) printf arg;
#define DDUMP_INTR2(flag, arg1, arg2) \
if (vrpmudebug&flag) vrpmu_dump_intr2(arg1,arg2);
#define DDUMP_REGS(flag, arg) if (vrpmudebug&flag) vrpmu_dump_regs(arg);
#else /* VRPMUDEBUG */
#define DPRINTF(flag, arg)
#define DDUMP_INTR2(flag, arg1, arg2)
#define DDUMP_REGS(flag, arg)
#endif /* VRPMUDEBUG */
static int vrpmumatch(struct device *, struct cfdata *, void *);
static void vrpmuattach(struct device *, struct device *, void *);
static void vrpmu_write(struct vrpmu_softc *, int, unsigned short);
static unsigned short vrpmu_read(struct vrpmu_softc *, int);
int vrpmu_intr(void *);
void vrpmu_dump_intr(void *);
void vrpmu_dump_intr2(unsigned int, unsigned int);
void vrpmu_dump_regs(void *);
struct cfattach vrpmu_ca = {
sizeof(struct vrpmu_softc), vrpmumatch, vrpmuattach
};
struct vrpmu_softc *this_pmu;
static inline void
vrpmu_write(struct vrpmu_softc *sc, int port, unsigned short val)
{
bus_space_write_2(sc->sc_iot, sc->sc_ioh, port, val);
}
static inline unsigned short
vrpmu_read(struct vrpmu_softc *sc, int port)
{
return (bus_space_read_2(sc->sc_iot, sc->sc_ioh, port));
}
static int
vrpmumatch(struct device *parent, struct cfdata *cf, void *aux)
{
return (1);
}
static void
vrpmuattach(struct device *parent, struct device *self, void *aux)
{
struct vrpmu_softc *sc = (struct vrpmu_softc *)self;
struct vrip_attach_args *va = aux;
#if NVRBCU > 0
int cpuid;
#endif /* NVRBCU > 0 */
bus_space_tag_t iot = va->va_iot;
bus_space_handle_t ioh;
if (bus_space_map(iot, va->va_addr, 1, 0, &ioh)) {
printf(": can't map bus space\n");
return;
}
sc->sc_iot = iot;
sc->sc_ioh = ioh;
if (!(sc->sc_handler =
vrip_intr_establish(va->va_vc, va->va_unit, 0, IPL_TTY,
vrpmu_intr, sc))) {
printf (": can't map interrupt line.\n");
return;
}
if (!vrip_intr_establish(va->va_vc, va->va_unit, 1, IPL_TTY,
vrpmu_intr, sc)) {
printf (": can't map interrupt line.\n");
return;
}
printf("\n");
/* dump current intrrupt states */
vrpmu_dump_intr(sc);
DDUMP_REGS(DEBUG_BOOT, sc);
/* clear interrupt status */
vrpmu_write(sc, PMUINT_REG_W, PMUINT_ALL);
vrpmu_write(sc, PMUINT2_REG_W, PMUINT2_ALL);
#if NVRBCU > 0
cpuid = vrbcu_vrip_getcpuid();
if (cpuid >= BCUREVID_RID_4111){
vrpmu_write(sc, PMUWAIT_REG_W, PMUWAIT_DEFAULT);
}
#endif /* NVRBCU */
this_pmu = sc;
}
/*
* dump PMU intr status regs
*
*/
void
vrpmu_dump_intr(void *arg)
{
struct vrpmu_softc *sc = arg;
unsigned int intstat1;
unsigned int intstat2;
intstat1 = vrpmu_read(sc, PMUINT_REG_W);
intstat2 = vrpmu_read(sc, PMUINT2_REG_W);
vrpmu_dump_intr2(intstat1, intstat2);
}
/*
* dump PMU intr status regs
*/
void
vrpmu_dump_intr2(unsigned int intstat1, unsigned int intstat2)
{
if (intstat1 & PMUINT_GPIO3)
printf("vrpmu: GPIO[3] activation\n");
if (intstat1 & PMUINT_GPIO2)
printf("vrpmu: GPIO[2] activation\n");
if (intstat1 & PMUINT_GPIO1)
printf("vrpmu: GPIO[1] activation\n");
if (intstat1 & PMUINT_GPIO0)
printf("vrpmu: GPIO[0] activation\n");
if (intstat1 & PMUINT_RTC)
printf("vrpmu: RTC alarm detected\n");
if (intstat1 & PMUINT_BATT)
printf("vrpmu: Battery low during activation\n");
if (intstat1 & PMUINT_TIMOUTRST)
printf("vrpmu: HAL timer reset\n");
if (intstat1 & PMUINT_RTCRST)
printf("vrpmu: RTC reset detected\n");
if (intstat1 & PMUINT_RSTSWRST)
printf("vrpmu: RESET switch detected\n");
if (intstat1 & PMUINT_DMSWRST)
printf("vrpmu: Deadman's switch detected\n");
if (intstat1 & PMUINT_BATTINTR)
printf("vrpmu: Battery low during normal ops\n");
if (intstat1 & PMUINT_POWERSW)
printf("vrpmu: POWER switch detected\n");
if (intstat2 & PMUINT_GPIO12)
printf("vrpmu: GPIO[12] activation\n");
if (intstat2 & PMUINT_GPIO11)
printf("vrpmu: GPIO[11] activation\n");
if (intstat2 & PMUINT_GPIO10)
printf("vrpmu: GPIO[10] activation\n");
if (intstat2 & PMUINT_GPIO9)
printf("vrpmu: GPIO[9] activation\n");
}
/*
* dump PMU registers
*
*/
void
vrpmu_dump_regs(void *arg)
{
struct vrpmu_softc *sc = arg;
unsigned int intstat1;
unsigned int intstat2;
unsigned int reg;
#if NVRBCU > 0
int cpuid;
#endif
intstat1 = vrpmu_read(sc, PMUINT_REG_W);
intstat2 = vrpmu_read(sc, PMUINT2_REG_W);
/* others? XXXX */
reg = vrpmu_read(sc, PMUCNT_REG_W);
printf("vrpmu: cnt 0x%x: ", reg);
dbg_bit_print(reg);
reg = vrpmu_read(sc, PMUCNT2_REG_W);
printf("vrpmu: cnt2 0x%x: ", reg);
dbg_bit_print(reg);
#if NVRBCU > 0
cpuid = vrbcu_vrip_getcpuid();
if (cpuid >= BCUREVID_RID_4111){
reg = vrpmu_read(sc, PMUWAIT_REG_W);
printf("vrpmu: wait 0x%x", reg);
}
if (cpuid >= BCUREVID_RID_4121){
reg = vrpmu_read(sc, PMUDIV_REG_W);
printf(" div 0x%x", reg);
}
printf("\n");
#endif /* NVRBCU > 0 */
}
/*
* PMU interrupt handler.
* XXX
*
* In the following interrupt routine we should actually DO something
* with the knowledge that we've gained. For now we just report it.
*/
int
vrpmu_intr(void *arg)
{
struct vrpmu_softc *sc = arg;
unsigned int intstat1;
unsigned int intstat2;
intstat1 = vrpmu_read(sc, PMUINT_REG_W);
/* clear interrupt status */
vrpmu_write(sc, PMUINT_REG_W, intstat1);
intstat2 = vrpmu_read(sc, PMUINT2_REG_W);
/* clear interrupt status */
vrpmu_write(sc, PMUINT2_REG_W, intstat2);
DDUMP_INTR2(DEBUG_INTR, intstat1, intstat2);
if (intstat1 & PMUINT_GPIO3)
;
if (intstat1 & PMUINT_GPIO2)
;
if (intstat1 & PMUINT_GPIO1)
;
if (intstat1 & PMUINT_GPIO0)
;
if (intstat1 & PMUINT_RTC)
;
if (intstat1 & PMUINT_BATT)
config_hook_call(CONFIG_HOOK_PMEVENT,
CONFIG_HOOK_PMEVENT_SUSPENDREQ, NULL);
if (intstat1 & PMUINT_TIMOUTRST)
;
if (intstat1 & PMUINT_RTCRST)
;
if (intstat1 & PMUINT_RSTSWRST)
;
if (intstat1 & PMUINT_DMSWRST)
;
if (intstat1 & PMUINT_BATTINTR)
config_hook_call(CONFIG_HOOK_PMEVENT,
CONFIG_HOOK_PMEVENT_SUSPENDREQ, NULL);
if (intstat1 & PMUINT_POWERSW) {
/*
* you can't detect when the button is released
*/
config_hook_call(CONFIG_HOOK_BUTTONEVENT,
CONFIG_HOOK_BUTTONEVENT_POWER,
(void*)1 /* on */);
config_hook_call(CONFIG_HOOK_BUTTONEVENT,
CONFIG_HOOK_BUTTONEVENT_POWER,
(void*)0 /* off */);
}
if (intstat2 & PMUINT_GPIO12)
;
if (intstat2 & PMUINT_GPIO11)
;
if (intstat2 & PMUINT_GPIO10)
;
if (intstat2 & PMUINT_GPIO9)
;
return (0);
}