NetBSD/UPDATING

1180 lines
45 KiB
Plaintext

$NetBSD: UPDATING,v 1.345 2024/02/09 22:08:30 andvar Exp $
This file (UPDATING) is intended to be a brief reference to recent
changes that might cause problems in the build process, and a guide for
what to do if something doesn't work.
For a more detailed description of the recommended way to build NetBSD
using build.sh, see the BUILDING file.
Note that much of the advice in this UPDATING file was written before
build.sh existed. Nevertheless, the advice here may be useful for
working around specific problems with build.sh.
Sections are marked with "^^^^^". After the section on "Recent changes"
are several sections containing more general information.
See also: BUILDING, build.sh, Makefile.
Recent changes:
^^^^^^^^^^^^^^^
20230828:
If:
- you updated to current and ran postinstall between 20230826
and 20230828 inclusive, and
- you are not using anything outside the base system to
populate /etc/openssl/certs (e.g., manually adding
certificates or using ca-certificates or mozilla-rootcerts or
mozilla-rootcerts-openssl from pkgsrc),
delete /etc/openssl/certs and rerun postinstall or just
`certctl rehash'.
Otherwise, certctl(8) will think someone else has left
/etc/openssl/certs in the way and will avoid clobbering it on
upgrade from older NetBSD.
20230718:
build.sh will use mk.conf in the same directory as build.sh instead
of /etc/mk.conf, unless MAKECONF is already defined in the environment.
20230714:
Import of gcc 10.5 requires a clean build of at least tools/gcc
and external/gpl3/gcc* object directories. An update build
without cleaning will result in obscure failures in rare corner
cases.
20230604:
Building native kernels with the installed make(1) instead of
the $TOOLDIR/bin/nbmake-${arch} wrapper will fail if userland
has not been updated. Note that this is an unsupported build
configuration (but usually works if userland is -current enough).
20230523:
ctfmerge was fixed as macOS host tool. This may require a clean tools
rebuild to detect the update to tools/compat/configure.
20230515:
New openssl build requires removal of the crypto/external/bsd/openssl
and tests/crypto/libcrypto subdirectories in the ${OBJDIR} hierarchy.
Otherwise test results may be wrong due to wrong "golden" output
files being installed.
20230322:
Fixes for moved /lib/libisns* mean that builds will complain about
./usr/lib/libisns* being missing until src/lib/libisns is forced
to (re)install the files, including the symlinks. The simplest
way is to clean this subdir before building.
20230112:
New binutils require an updated ld.elf_so. If you are doing
(unsupported) in-place self builds (with the -E flag to build.sh),
make sure to have installed latest ld.elf_so before you rebuild
userland.
20221116:
The addition to NetBSD's version of UFS2 of support for extended
attributes broke backward compatibility with previous releases
of NetBSD, so UFS2 has been restored to being compatible with
previous NetBSD releases by disabling extended attributes.
(Note that ACLs are implemented as extended attributes, so
this changes disables ACLs as well.)
Support for UFS2 with extended attributes is now available in a new
UFS variant called UFS2ea. If you have created extended attributes
in an original UFS2 file system then "fsck -p" will now fail due to
the unexpected presence of extended attributes and "fsck -y" will
remove all extended attributes. If you wish to preserve extended
attributes rather than delete them, there is a utility to convert
a UFS2 file system to UFS2ea and leave extended attributes in place,
but this should be used with caution since it will preserve any
extended attributes that have been corrupted by the backward
incompatibility too.
If you wish to use a UFS2ea file system as your root file system,
then you will need to update your boot loader to a version that
supports UFS2ea.
For more information, see:
https://wiki.netbsd.org/features/UFS2ea
20221111:
The new libdrm import worsened the conflict issues for the
kdump/ktruss ioctl, and i915 now conflicts with base, and has
been turned off. This will cause update build issues like:
kdump-ioctl.c:12175:143: error: 'DRM_IOCTL_I915_DESTROY_HEAP'
undeclared here (not in a function);
did you mean 'DRM_IOCTL_MODE_DESTROY_DUMB'?
You'll need to clean usr.bin/ktruss, usr.bin/kdump, and rescue.
20220921:
Since the kernel version was bumped to 9.99.100, the bootloader
must be updated on x86 or EFI boot platforms in order to load
modules from boot.cfg(5) or interactively at the bootloader
prompt.
The kernel can still load modules at runtime, with modload(8)
or modules.conf(5), with no bootloader update. This will not
affect release branches because it only applies to patch
numbers >=100.
On x86 (i386 or amd64) with BIOS boot, this requires copying a
new /usr/mdec/boot to /boot. You can build this in the destdir
by running `$TOOLDIR/bin/nbmake-$ARCH dependall install' in
sys/arch/i386/stand.
On platforms with EFI boot (including x86 with EFI boot), this
requires copying a new /usr/mdec/boot*.efi to the EFI/BOOT/
directory on the EFI system partition. The boot*.efi file is:
aarch64 bootaa64.efi
amd64 bootx64.efi
arm bootarm.efi (32-bit arm)
i386 bootx32.efi
You can build this in the destdir by running
`$TOOLDIR/bin/nbmake-$ARCH dependall install' in
sys/stand/efiboot/boot*.
20220821:
Support for building extsrc/ has been deprecated.
EXTSRCSRCDIR and MKEXTSRC have been deprecated.
20220714:
Updates to xorg-server and associated drivers may cause builds to
fail. Cleaning both DESTDIR and the xorg build tree may be needed.
20220628:
Changes in the build of src/games/robots require a clean build
of that program.
20211116:
Changes in the xorg build require clean obj dirs for external/mit/xorg
(or a full clean/non-update build).
20211112:
Device tree sources were updated for evbarm. Some device nodes
(in particular, ld(4) devices on the ROCKPro64) will be renumbered.
20211014:
MKPIE default for aarch64 has changed, a clean build is required.
20210917:
Changed MNT_ACLS to default to POSIX1e ACLs instead of NFSv4
ACLs, to be compatible with FreeBSD. If you are using NFSv4 ACLs
and have "acls" in /etc/fstab you'll need to change it to "nfs4acls".
20210711:
Updated GMP sources may require cleaning in tools/gmp and/or in
external/lgpl3/gmp/lib, particularly if GCC itself does not build.
20210417:
GCC 10 was enabled for several platforms. If builds fail in either
tools/gcc or external/gpl/gcc, first try cleaning those objects and
removing the $DESTDIR/usr/include/g++ subdirectory.
20201230:
lint1/ops.c is no longer autogenerated. If this makes the build
fail, clean $OBJDIR/tools/*lint* and $OBJDIR/usr.bin/*xlint*.
20201016:
MIPS kernel modules have been disabled until they work. This will
turn up in extra files in the DESTDIR, which should be cleaned.
20200925:
GNU MPC and MPFR have been updated. At least MPFR needs cleaning
in both the tools and external dirs.
20200912:
GCC 9 has arrived for Arm and x86 platforms, and will be coming
for several more, as will binutils 2.34. Clean as required.
20200907:
GCC 9 is coming, and binutils has been updated for MIPS. This
probably requires cleaning the tools/binutils.
20200811:
GCC updates may require cleaning the objdir. This may occur
due to GCC 7.5 update, GCC 8.4 move to gcc.old, or the upcoming
GCC 9 upgrade.
20200614:
blacklist* has been renamed to blocklist*. postinstall(8)
should handle the migration.
20200601:
Due to a mistake in LIBISPRIVATE handling, .so libraries were
created in the build directories and need cleaning.
20200311:
GCC 8 ports will need cleaning in src/tools/gcc and
src/external/gpl3/gcc due to GCC 8.4 update.
20191118:
More architectures were switched to gcc8:
i386, ia64 powerpc64, sparc, sparc64, arm
The same comments as in 20191022 apply.
20191112:
The LLVM update requires a clean rebuild for all architectures using
LLVM during the tools build phase (i386, amd64, aarch64).
20191022:
Ports amd64 and aarch64 switched to GCC 8.3 by default.
In-place ("expert mode", build.sh -E) builds are not supported
when going from a GCC 7 userland to GCC 8. Do a regular
build to a different DESTDIR (or preferably: build.sh -U) at least
once and install sets, or download comp.{tar.xz,tgz} from the
daily builds and install that before doing the next in-place build.
20191001:
GCC 8.3 was imported. Builds of src/tools/gcc may fail if
old builds with GCC 7 output now uses GCC 8. Clean this
directory, and also clean src/external/gpl3/gcc.
20190903:
Files with names that coincide with existing files' names on
case-insensitive file systems were inadvertently committed, for
radeon GPU firmware. We cannot mark these as obsolete for
postinstall to fix, so if you updated src since 2019-08-26, and
ran build.sh distribution or ran build.sh release, you must
manually delete the following files in your DESTDIR (which is
usually $OBJDIR/destir.$ARCH), or from / if you have installed
them:
/libdata/firmware/radeon/bonaire_ce.bin
/libdata/firmware/radeon/bonaire_mc.bin
/libdata/firmware/radeon/bonaire_me.bin
/libdata/firmware/radeon/bonaire_mec.bin
/libdata/firmware/radeon/bonaire_pfp.bin
/libdata/firmware/radeon/bonaire_rlc.bin
/libdata/firmware/radeon/bonaire_sdma.bin
/libdata/firmware/radeon/bonaire_smc.bin
/libdata/firmware/radeon/bonaire_uvd.bin
/libdata/firmware/radeon/hainan_ce.bin
/libdata/firmware/radeon/hainan_mc.bin
/libdata/firmware/radeon/hainan_me.bin
/libdata/firmware/radeon/hainan_pfp.bin
/libdata/firmware/radeon/hainan_rlc.bin
/libdata/firmware/radeon/hainan_smc.bin
/libdata/firmware/radeon/hawaii_ce.bin
/libdata/firmware/radeon/hawaii_mc.bin
/libdata/firmware/radeon/hawaii_me.bin
/libdata/firmware/radeon/hawaii_mec.bin
/libdata/firmware/radeon/hawaii_pfp.bin
/libdata/firmware/radeon/hawaii_rlc.bin
/libdata/firmware/radeon/hawaii_sdma.bin
/libdata/firmware/radeon/hawaii_smc.bin
/libdata/firmware/radeon/kabini_ce.bin
/libdata/firmware/radeon/kabini_me.bin
/libdata/firmware/radeon/kabini_mec.bin
/libdata/firmware/radeon/kabini_pfp.bin
/libdata/firmware/radeon/kabini_rlc.bin
/libdata/firmware/radeon/kabini_sdma.bin
/libdata/firmware/radeon/kaveri_ce.bin
/libdata/firmware/radeon/kaveri_me.bin
/libdata/firmware/radeon/kaveri_mec.bin
/libdata/firmware/radeon/kaveri_mec2.bin
/libdata/firmware/radeon/kaveri_pfp.bin
/libdata/firmware/radeon/kaveri_rlc.bin
/libdata/firmware/radeon/kaveri_sdma.bin
/libdata/firmware/radeon/mullins_ce.bin
/libdata/firmware/radeon/mullins_me.bin
/libdata/firmware/radeon/mullins_mec.bin
/libdata/firmware/radeon/mullins_pfp.bin
/libdata/firmware/radeon/mullins_rlc.bin
/libdata/firmware/radeon/mullins_sdma.bin
/libdata/firmware/radeon/oland_ce.bin
/libdata/firmware/radeon/oland_mc.bin
/libdata/firmware/radeon/oland_me.bin
/libdata/firmware/radeon/oland_pfp.bin
/libdata/firmware/radeon/oland_rlc.bin
/libdata/firmware/radeon/oland_smc.bin
/libdata/firmware/radeon/pitcairn_ce.bin
/libdata/firmware/radeon/pitcairn_mc.bin
/libdata/firmware/radeon/pitcairn_me.bin
/libdata/firmware/radeon/pitcairn_pfp.bin
/libdata/firmware/radeon/pitcairn_rlc.bin
/libdata/firmware/radeon/pitcairn_smc.bin
/libdata/firmware/radeon/tahiti_ce.bin
/libdata/firmware/radeon/tahiti_mc.bin
/libdata/firmware/radeon/tahiti_me.bin
/libdata/firmware/radeon/tahiti_pfp.bin
/libdata/firmware/radeon/tahiti_rlc.bin
/libdata/firmware/radeon/tahiti_smc.bin
/libdata/firmware/radeon/verde_ce.bin
/libdata/firmware/radeon/verde_mc.bin
/libdata/firmware/radeon/verde_me.bin
/libdata/firmware/radeon/verde_pfp.bin
/libdata/firmware/radeon/verde_rlc.bin
/libdata/firmware/radeon/verde_smc.bin
We will re-import these radeon firmware images another way
later.
20190727:
The uefi bootloader has gained tftp support and needs a clean
build. If you do update builds, manually clean its object
directory by something like:
cd sys/arch/i386/stand/efiboot && make clean
20190723:
The jemalloc allocator in libc is now built without extended
debugging (for performance reasons). In update builds make sure
to rebuild it completely, by removing all affected object files,
including compat builds, something like:
cd /usr/obj && find . -type d -name jemalloc|xargs rm -rf
20190207:
GCC 7 switched for many ports. Update builds are likely to fail.
20180924:
A newer OpenSSL version has been imported. If you are doing
update builds, make sure to remove all old obj dirs, like:
cd /usr/obj && find . -type d -name openssl | xargs rm -rf
20180717:
On aarch64 int64_t and related types have changed from long long
to long. This requires recompiling all C++ binaries.
20180713:
On amd64 and i386 static binaries are now build position
independent. This requires recompilation of all object
files used to create the crunched /rescue binary.
Clean the rescue directory in your obj directory before
doing an update build, otherwise linking will fail.
20180414:
Existing binutils was migrated to binutils.old. Manual
removal of tools/binutils objects directory may be required
to fix tools build failure.
20180311:
bdftopcf was updated and may need cleaning in the
src/external/mit/xorg/tools/bdftopcf subdirectory if there are
link errors.
20180212:
between OpenSSL and GCC updates, many things may fail to build.
any failure that looks like GCC or openssl is best handled by
a clean destdir and objdir. Full cleandir and destdir deletion
is recommended if build failures occur.
20171225:
removal of the vadvise syscall requires manual removal of all
associated files from the libc build object directory (including
the .depend files) - a command like:
cd $OBJ && find . -type d -name libc | xargs rm -rf
For architectures that support multiple "compat" binary targets,
you'll need to cleanup both the regular libc directory and the
compat ones (the above command will do that).
20171010:
a change to the build structure of external/bsd/acpica/bin/iasl
means that its objdir (or *.d and .depend at least) might need
to be manually removed - or a build done once without -u.
20170822:
a new version of GMP has been imported and probably
will break parts of builds related to themselves or GCC, both
in the tools and the native section. Remove all GCC, GMP, MPFR
and MPC objdirs or build once without -u.
20170816:
a new version of MPFR and MPC have been imported and probably
will break parts of builds related to themselves or GCC, both
in the tools and the native section. Remove all GCC, GMP, MPFR
and MPC objdirs or build once without -u.
20170402:
a new version of dhcpcd has been imported, which does not support
update builds from the previous version. Remove your
external/bsd/dhcpcd object dir or build once without -u.
20170211:
a new terminfo database has been imported.
The structure of it has changed slightly from prior versions and
an updated tic tool is required.
If you build.sh, don't use -u
20170207:
various arch dependent libc/exect.S files were removed
Either remove the obj directories (lib/libc and compat/amd64/i386/lib
if it exists) or do a clean build.
(This is a bug in the make system, it should be corrected without
human intervention, but isn't.)
20170104:
xinput build options have changed.
Remove the obj directory (external/mit/xorg/bin/xinput)
if you build.sh -u
20170103:
a new version of flex has been imported.
Remove the file from obj (external/bsd/flex)
if you build.sh -u
20161014:
a new version of OpenSSL has been imported.
Remove the files from obj (crypto/external/bsd/openssl)
if you build.sh -u
20161009:
a new version of dhcpcd has been imported with slightly changed
build infrastructure. When doing a build.sh -u this requires
pruning the external/bsd/dhcpcd objdir.
20160914:
i386, amd64, shark, ofppc and macppc have joined shark and x68k
ports in using xorg-server 1.18. This requires a clean destdir
and a clean objdir.
20160527:
i386 needs a full cleandir or objdir deletion because PIE has
been enabled. (see the amd64 entry two down for further info)
20160418:
libedit needs manual removal of all autogenerated files since
some of them are not autogenerated anymore. Remember that there
might be two copies of libedit if your platform builds "compat".
20160410:
amd64 needs full "make cleandir" or deletion of objdir now that
PIE has been enabled for amd64. PIE, or position-independent
executables, means all code, including executables and not just
shared libraries, is position-independent and hence able to be
relocated by ASLR, address space layout randomization.
The change was made in Makefile variables for compiler and
linker flags, for which make(1) does not record dependencies,
hence it is unable to detect that all .o files need rebuilding.
Partial rebuilds with some modified source files will likely
fail when linking executables, since the linker refuses to mix
position-independent code with position-dependent code in
position-independent executables:
.../x86_64--netbsd/bin/ld: foo.o: relocation R_X86_64_32 against `...' cannot be used when making a shared object; recompile with -fPIC
20160401:
Ports switching to GCC 5.3 will need a full "make cleandir".
Some people have found that cleandir is not sufficient, so if
in doubt delete the entire object directory tree for gcc.
20160306:
NetBSD's regexp implementation is now part of libnbcompat.
Nblex, nbm4, nbpax, nbsed use it and they may crash on
non-NetBSD hosts if linked with stale object files produced
while they included a non-NetBSD regex.h.
In any case, you should "make cleandir" at least these tools
before updating your toolchain.
20160125:
Dtrace has been enabled by default on some architectures.
When doing an update build, make sure to clean the etc/mtree
object directory before starting the build - otherwise the
needed directories in destdir will not be created.
An easy way to do this is:
cd src/etc/mtree && $TOOLDIR/bin/nbmake-$arch cleandir
20150818:
New acpica requires "make cleandir" in src/external/bsd/acpica
again.
20150413:
New acpica requires "make cleandir" and reinstalling yacc
in /usr/src/external/bsd/byacc and /usr/src/tools/yacc and
also "make cleandir" in /usr/src/external/bsd/acpica.
20150404:
Lint changes require a full rebuild of the tool, so make
sure to build without -u option to build.sh, or manually
do a make cleandir in src/tools/lint1 and
src/usr.bin/xlint.
20150310:
Improvements to openssl for arm mean that update builds of
the openssl libraries will fail. A make cleandir in
external/bsd/openssl/lib is needed
20141026:
A mishap during the import of pppd may cause your corruption
in your cvs directory if you happened to do a cvs update
during a short period of time. To fix, just remove the
directory src/external/bsd/ppp/dist/pppd completely
and let cvs restore it on next update.
20140721:
The src/external/mit/lua/src directory was accidentally created
and then deleted in the CVS repository. If you get errors like
cvs [update aborted]: cannot open directory
/cvsroot/src/external/mit/lua/src: No such file or directory
then delete your local copy of that directory tree and try again.
20140530:
ARM eABI switched to DWARF based exception handling. This requires
rebuilding all C++ code. It is strongly advised to do a clean build.
20140131:
The new compiler_rt/libc integration moved a few things. It is strongly
advised to do a clean build. At least lib/libc, the compat version(s)
of libc, libkern, rump and the kernels need to be cleaned.
20131227:
1. The new ntpd runs in a restricted mode to prevent amplification
attacks. If you need ntpdc to work you need to explicitly enable
mode7 in your config file. Make sure you put the necessary restrict
statements to avoid being exposed.
2. strncat has moved from lib/libc to common/lib/libc; you might need
to make clean in libc
20131129:
The GMP sources were updated, and builds will likely fail without
cleaning their build trees for both tools and in-tree, like below.
20131128:
The MPC and MPFR sources were updated, and builds may require their
tools and in-tree directories cleaned for successful updates.
20130605:
The kernel option FAST_IPSEC no longer exists, it's been renamed
to IPSEC (and the older IPSEC version removed).
20130605:
Previous freetype installations erroneously installed private
header files. If you are building against a non-empty $DESTDIR,
please remove ${DESTDIR}//usr/X11R7/include/freetype2/freetype/.
20130531:
The xdm update may cause build failure due to xdm.man being
in the obj tree. Make sure to ensure any like this:
nbmake: nbmake: don't know how to make xdm.man. Stop
is fixed by deleting the xdm.man in the obj tree.
20130530:
Updates of many xsrc packages will leave old .pc files around.
Best to clean out the xsrc objdir entirely before rebuilds.
20130301:
The removal of netiso requires manual removal of /usr/include/netiso
prior to the build and make cleandir in /usr/src/usr.bin/{ktruss,kdump}
20120726:
The update of OpenSSL requires cleaning both the OpenSSL build
directory and DESTDIR. *Even non-update builds require cleaning
DESTDIR.* Builds done without taking these steps may fail, or in
some cases may succeed and install broken OpenSSL libraries that
cause third-party software to link incorrectly and/or crash.
20120507:
The database schema for makemandb was changed. You will
need to update the database using 'makemandb -f' or wait
for the next weekly run to fix it.
20120319:
sys/conf/Makefile.kern.inc has been modified to adjust the
size of db_symtab automatically. You need to update dbsym in
your $TOOLDIR to build kernels with options SYMTAB_SPACE. If
you don't want this behavior, add AUTO_SYMTAB_SPACE=no to your
mk.conf.
20120216:
Default for MKCATPAGES changed to NO. Update builds will fail
unless DESTDIR is cleaned manually. If you built between 20120207
and 20120216, daily and weekly could have created an unreadable
/var/db/man.db index for apropos. Running makemandb -f or
the next run of weekly will fix it.
20111227:
If you built between 20111225 and 20111227 you need to remove
/usr/lib/libpam.so.4* and /usr/lib/security/*.so.4, since the
bump has been reverted.
20111125:
The "rnd" pseudodevice has been added to sys/conf/std, which
means it should no longer be explicitly listed in kernel
configuration files. The line "pseudo-device rnd" should be
removed from any custom kernel config files users may have.
20111119:
A problem with the datastructures used by the rndctl(8)
utility (pointers in datastructures in an array, making 32->64
bit compatibility very painful) has been fixed in a
non-backwards-compatible way. If you replace your kernel,
replace your rndctl executable too.
20111001:
the prop_*_send_syscall() functions from proplib(3) have been
changed and their new version is not backward compatible with the old
one. So ensure that all consumers of these functions (currently:
quota2 code and its tests) are updated together with the new lib.
20110817:
sparc has been changed to use GCC 4.5.3, so any objdir or
DESTDIR for them should be deleted before updating.
20110806:
i386 and amd64 have been changed to use GCC 4.5.3, so any
objdir or DESTDIR for them should be deleted before updating.
20110805:
The update to GCC 4.5.3 requires a non-trivial portion of
the tree to be cleaned. Best to delete both objdir and
DESTDIR before running this update. So far, only the
sparc64, mips and powerpc platforms have changed.
20110803:
The layout of external/public-domain/xz has changed. To do an
update build you will have to remove the contents of the OBJDIR
for external/public-domain/xz/bin by hand as the xz entry there
is now a directory.
20110410:
The configuration of src/tools/gcc has changed. To do an
update build you have to clean both tools/binutils and
tools/gcc by hand.
20110328:
Building the Xorg binary was moved into a subdirectory to fix
ordering issues with "make all". It may be necessary to remove
the OBJDIR for external/mit/xorg/server/xorg-server/hw/xfree86
if your update build fails, as the "Xorg" entry there is now a
directory.
20110121:
Assembler files no longer use -traditional-cpp. This can break
the build of individual parts of the tree. This is handled
correctly by build.sh. Manual builds have to update /usr/share/mk
and re-run config(1) for any kernel configurations as needed.
20101217:
The tcpdump(8) program was changed to drop privileges and chroot(2)
by default. It may be necessary to manually update passwd(5) and
group(5) in order to make the program work with existing setups.
20101125:
The latest changes to setenv(3) disallow setting environment
variables with names that contain '='. Revision 1.18 of env.c
assumed that this was allowed. Installing a new libc with an
old copy of /usr/bin/env causes env x=1 printenv | grep x= to
break which affects the autoconf tests for dependency finding,
so building gcc will end up printing:
checking dependency style of gcc... none
configure: error: no usable dependency style found
Fix it by rebuilding and re-installing env.
20101119:
Recent Xorg updates in xsrc/external/mit/ may cause various build
or run-time problems. Delete your entire DESTDIR and OBJDIR if you
have any build problems with xsrc, or problems with mismatched
versions between xorg-server and drivers.
20100604:
The update of ATF to 0.9 causes old tests written in shell to fail
unless they are rebuilt. If you are building with MKUPDATE=yes,
you need to clean the src/external/bsd/atf/tests/ and the src/tests/
trees by hand.
20100522:
Recent Xorg updates in xsrc/external/mit/ will cause various build
problems. Delete your entire DESTDIR and OBJDIR if you have any
build problems with xsrc.
20100522:
private section of <ctype.h> was split, and now mklocale(1)
include ctype_local.h, so you have to make cleandir in tools/mklocale.
20100520:
The location of the xkb compiled descriptions has changed. Please
remove usr/X11R7/lib/X11/xkb/compiled from your $DESTDIR.
20100222:
The shared objects file extension has been changed from .so to
.pico, in order to avoid conflicts with shared libraries names
libXX.so. All now stale regular .so files can be removed from
your object directories.
20100204:
The termcap database has been removed from the sources,
but has not been marked obsolete so it is not removed
from the system when upgrading.
As such, you will need to remove them from your object
and destination directories.
20091101:
After updating, it may be necessary to make the 'cleandir'
target in src/tools/yacc/ and in src/usr.bin/yacc/ before a
'build.sh -u tools' or 'build.sh -u distribution'. Ditto
src/tools/lex/ and src/usr.bin/lex/.
20091001:
On amd64 you must rebuild tools (to get the new binutils)
before building a kernel, or the build fails on cpufunc.S.
20091001:
An error will create a ./usr/X11R7/lib/X11/xkb/compiled/xkb
symlink, failing the build. Delete the link, and the subdir
it is in, and retry your build.
20090718:
libc build changed so that strchr() provides the extra entry
point for index(). Update build of libc.a (and libc_pic.a)
may fail because the archive contains the unwanted index.o.
(Similarly for strrchr() and rindex().)
20090709:
Native Xorg was upgraded again. Builds will probably fail again
without a clean objdir, at least for src/external/mit/xorg.
20090616:
Native Xorg was upgraded. Builds will need a clean objdir for
src/external/mit/xorg. Upgrading a system from sets will not
work properly yet as the /usr/X11R7/lib/X11/xkb/symbols/pc
subdirectory has been changed into a file, and this needs to
be manually "rm -r"'ed before installing xbase.tgz.
20090501:
Several new functions were added to string.h/libc, and this
can cause autoconf problems during the tool build for people
who fail to clean out their tools objects properly. If you
note messages about stpcpy, stpncpy or strnlen accompanying a
failure during the tool build, clean out all your tools
objects and start again.
20090325:
The i386 port was switched to i486 default toolchain. This requires
cleaning your src/tools directory and $TOOLDIR and rebuilding them.
20090126:
The __posix_fadvise50 system call changed assembly stub type. You
need to 'rm -f __posix_fadvise50.*' in the libc build directory
to avoid using the old assembly stub.
20090202:
pkg_install now depends on the pkgdb cache for automatic conflict
detection. It is recommended to rebuild the cache with
``pkg_admin rebuild''.
20090110:
time_t and dev_t have been bumped to 64 bit quantities. To upgrade:
1. Make sure your kernel has COMPAT_50 in it. Build and install.
This is needed even in the MODULAR kernel because there is
conditionally compiled code in rtsock.c.
2. make sure build.sh completes and the binaries in a chroot work
before installing.
3. If you don't use build.sh and you build directly to root, and
your build breaks in the middle, don't despair. Make sure headers
are installed properly, and start building libraries first libc
and libutil, install them and then continue building all the
libraries in src/lib and src/gnu/lib and install them. Once
the new libraries are installed, you can restart the build.
4. If you compile packages and you notice link time warnings,
rebuild the required packages to update their shared libraries.
Any package you rebuild will require rebuilding all the packages
that depend on it.
5. Next time you run pwd_mkdb with the new binary, the file
will be upgraded and it will not be backwards compatible.
6. The utmpx/wtmpx files (/var/run/utmpx and /var/log/wtmpx, see
lastlogx(5)) have been versioned, and there is a heuristic
for utmp. You are better off removing the old files after
upgrading. The automated clearing of /var/run during
boot, and the automated rotating of files in /var/log by
newsyslog(8), may mean that you do not have to remove the
files manually.
7. The optional accounting file (/var/account/acct, see
accton(8)) has not been versioned, and will need to be
removed. The automatic rotation of the accounting file by
/etc/daily limits the bad consequences of failure to remove
the file.
8. Application software that writes time_t to binary files on
disk will break or need attention. Most notably: if you are
using PostgreSQL < 8.4, you need to dump your databases,
rebuild PostgreSQL with the new time_t, then restore.
20081219:
config(1) has been updated, and one of the files it creates -
swapnetbsd.o - has changed format. You need to rebuild config
(done automatically by build.sh) and then you need to rerun
config on all kernel configuration files before rebuilding those
kernels.
20081205:
If you build with MKX11=no, you should remove /etc/rc.d/xdm and
/etc/rc.d/xfs from DESTDIR because those files were moved to the xetc
set and will appear as extra files for MKX11=no update builds.
20081122:
On i386, various kernel options(4) in GENERIC including
file systems have been disabled and moved into kernel modules.
Before trying a new GENERIC kernel, you have to prepare the
following files as well as a new GENERIC kernel:
- build and install kernel modules from src/sys/modules
- install the latest bootloader, which will load a module
for the file system from which the kernel is loaded automatically
If you have to load your kernel from a file system which is not of
the same type as the root file system, you have to load the necessary
file system module manually on the boot prompt or in the boot.cfg file.
20080827:
If you built and installed a libc from sources between
2008/08/20 and 2008/08/26 you got a broken strtouq(3)
which results in false errors reported by lint(1).
Since this breaks the libc build itself, manual help is
needed -- lint must be disabled temporarily, e.g.:
$ (cd lib/libc && make MKLINT=no dependall install)
20080813:
MKDEBUG build was broken because the .depend files did not know
about .go files. You need to remove all .depend files and rebuild.
20080802:
A regression in binary compatibility for pthread_mutex_t has
been fixed. Unfortunately, the price is breaking compatibility
for -current.
Threaded programs (using libpthread) and C++ programs (using
libstdc++) compiled after 20070907 and before 20080802 need to
be recompiled.
One way to find affected pkgsrc packages:
$ grep REQUIRES=/usr/lib/libpthread /var/db/pkg/*/+BUILD_INFO
$ grep REQUIRES=/usr/lib/libstdc++ /var/db/pkg/*/+BUILD_INFO
20080731:
WAPBL (metadata journaling support) has been added, but at this
time isn't backwards compatible with pre-WAPBL aware kernels
and userland (fsck_ffs in particular). Please make sure you
don't use a journaled filesystem with an older kernel/userland,
especially an uncleanly mounted journaled filesystem. WAPBL
also requires the super block to be in the UFS2 format. You
can use fsck_ffs -c 4 to update the superblock format.
20080721:
Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR
isn't defined.
20080531:
The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed
from 125 (conflicted with DRVCTLCOMMAND) to 129. The drvctl(8)
utility needs to be rebuilt and reinstalled as older binaries
won't work correctly. The following sequence of commands:
$ (cd sys/sys/ && nbmake-$arch includes)
$ (cd sbin/drvctl/ && nbmake-$arch clean)
$ (cd sbin/drvctl/ && nbmake-$arch all)
leaves new drvctl utility in sbin/drvctl build directory.
20080503:
The <bsd.lib.mk> variable MKPRIVATELIB was renamed to LIBISPRIVATE.
20080521:
For a while, unprivileged UPDATE builds would fail to
succeed at the checkflist stage, complaining that
${DESTDIR}/stand/<arch>/ did not exist. A fix for this
problem was committed to share/mk/bsd.kmodule.mk, revision 1.9.
If you already hit this problem, update the .mk file,
remove ${DESTDIR}/stand/<arch>, and re-run the build.
20080303:
Linker warnings are now fatal if $WARNS>0.
20080126:
The posix_fadvise system call has been changed from an assembly
stub, to a c file that calls an assembly stub. You need to
'rm -f posix_fadvise.* .depend' in the libc build directory to
avoid using the old assembly stub.
20071209:
The acpiec(4) driver has been split into two attachments. If you
get ACPI errors before the attachment, please update your kernel
configuration file appropriately or see GENERIC for more details.
20071115:
The it(4) driver has been renamed to itesio(4) and the old port
argument specified in the kernel configuration file is not valid
anymore. The itesio(4) driver now uses the Super I/O address port
rather than the EC address port. Please update your kernel
configuration file appropriately or see GENERIC for more details.
20071028:
The pccons(4) driver has been removed from the NetBSD/shark port.
You need to update any custom kernel configuration file you have
to remove any references to pccons (which includes removing the
now useless XSERVER option) and replace them with the correct
entries for the wscons driver. See the GENERIC configuration file
for more details.
20070913:
A latent bug in dhclient/dhcpd that caused it to be unable to
enumerate interfaces was fixed. The bug began to cause
problems after 20070911 when the kernel's SIOCGIFCONF
implementation was repaired. From 20070529 to 20070911 racoon
could not enumerate interfaces. (These are noted because
normal kernel/userspace version matching hygiene is not
sufficient to avoid this problem.) Ensure that both kernel
and userland are from after 20070913.
20070703:
nbinstall has been renamed ${MACHINE_GNU_ARCH}-install. It
calls the target-specific strip program, and the logic to pass
down STRIP from make has been removed. This requires a
re-installation of tools.
20070422:
The way OS emulations lookup filenames inside the emulation root
has been changed. Rather than modify the pathname (and copy back
to userspace) namei() and lookup() directly check the emulation
root. One side effect is that absolute symlinks inside the emulated
root file system will be relative to that file system - unless they
start /../ this is useful when the emulated root is a real install
that has such links.
This might affect symlinks that have been added to reference outside
the emulated root.
20070412:
The pckbc driver on sgimips IP32 has been removed. Use macekbc
instead. See the GENERIC32_IP3x kernel configuration for an
example.
20070319:
src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
on many platforms due to incorrect flags settings. If you
updated and built after about 20070315, do "nbmake-$arch
cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
rebuild of object files that might have been built
incorrectly, and ensure that you have at least
src/lib/libc/Makefile 1.130.
20070210:
src/sys/sys/{sa.h,savar.h} were removed.
find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
| xargs egrep -l '/sa.h|/savar.h' | xargs rm
will allow dependencies on those files to get get rebuilt
20070209:
The threading model was changed when the newlock2 branch
was merged to NetBSD-current. If you boot with a new
kernel (version 4.99.10), then you also need a new pthread
library (/usr/lib/libpthread.so.0.7). If you boot with
an old kernel, then you need the old pthread library
(/usr/lib/libpthread.so.0.6). Provided you keep the kernel and
the pthread library in sync, old threaded applications should
continue to work with an old or new kernel. Note that named(8)
is the only threaded application in the base system.
20061214:
Following the move of string_to_flags() and flags_to_string()
from the bin/ls/ sources to libutil, users doing UPDATE builds
will need to do a "make cleandir" in
tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
as the installation images in distrib/
in order to excise stale references to the old stat_flags.h header
file in the ls sources -- stat_flags.h has been removed.
20061108:
The configure script used in the src/tools/gcc compiler has been
changed to indicate that our libc has ssp support built-in and
does not depend on -lssp and -lssp-nonshared. You'll need to
make clean in src/tools/gcc first to rebuild the compiler.
20061009:
The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.
20060814:
The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
withdrawn. Use vidcvideo and pckbd instead. See the GENERIC
kernel configuration for an example. X servers from the last
few years should cope.
20060703:
MPACPI is no more. We always configure PCI interrupts using ACPI
if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed
to ACPI_SCANPCI. Thanks to work from fvdl.
20060627:
socket(2) has changed, and its system call has been versioned.
For userlands with the old version of socket(2), make sure that
your kernel has 'options COMPAT_30' set, or else 'bad system call'
errors will result.
Hints for a more successful build:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Use build.sh, but do not use its "expert mode":
This will automatically build the tools in the
correct order, and it will keep the tools and the
new build products from interfering with the running
system. This will allow you to ignore most of the
other advice in this file.
Build a new kernel first:
This makes sure that any new system calls or features
expected by the new userland will be present. This
helps to avoid critical errors when upgrading.
Use object directories:
This helps to keep stale object
files from polluting the build if a Makefile "forgets"
about one. It also makes it easier to clean up after
a build. It's also necessary if you want to use the
same source tree for multiple machines.
To use object directories with build.sh:
a) invoke build.sh with the "-M" or "-O" options.
To use object directories without using build.sh:
a) cd /usr/src ; make cleandir
b) Add "OBJMACHINE=yes" to /etc/mk.conf
c) Add "MKOBJDIRS=yes" to /etc/mk.conf
d) cd /usr/src ; make build
Note that running "make obj" in a directory will create
in obj.$MACHINE directory.
Build to a DESTDIR:
This helps to keep old installed files (especially libraries)
from interfering with the new build.
To build to a DESTDIR with build.sh, use the "-D" option.
To build to a DESTDIR without using build.sh, set the DESTDIR
environment variable before running make build. It should be
set to the pathname of an initially empty directory.
Problems: if you do not use build.sh, you might need to
update critical utilities without using DESTDIR since
nothing is executed from what is installed in DESTDIR.
(See critical utils, below.)
Build often:
This keeps critical utilities current enough to not choke
on any other part of the source tree that depends on up to
date functionality. If you use build.sh, you should not have
this problem.
What to do if things don't work:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
When things don't work there are usually a few things that commonly
should be done.
1) make includes
This should be done automatically by make build.
2) cd share/mk && make install
Again, automatically done by make build.
Failsafe rebuild of a small part of the tree:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
To make sure you rebuild something correctly you want to do
something like the following:
1) Make sure the includes and .mk files are up to date.
2) Make sure any program used to build the particular
utility is up to date. (yacc, lex, etc...)
3) cd ...path/to/util...
make cleandir
rm ...all obj directories...
make cleandir # yes, again
make obj
make depend && make
Failsafe rebuild of the entire tree:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If you really want to make sure the source tree is clean and
ready for a build try the following. Note that sourcing /etc/mk.conf
(a make(1) Makefile) in this manner is not right, and will not work
for anyone who uses any make(1) features in /etc/mk.conf.
---cut here---
#!/bin/sh
. /etc/mk.conf
if [ -z $NETBSDSRCDIR ] ; then
NETBSDSRCDIR=/usr/src
fi
if [ \! -d $NETBSDSRCDIR ] ; then
echo Unable to find sources
exit 1
fi
find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;
if [ -z $BSDOBJDIR ] ; then
BSDOBJDIR=/usr/obj
fi
if [ -d $BSDOBJDIR ] ; then
rm -rf $BSDOBJDIR
fi
cd $NETBSDSRCDIR && make cleandir
---cut here---
Critical utilities:
^^^^^^^^^^^^^^^^^^^
usr.bin/compile_et
usr.bin/make
usr.bin/yacc
usr.bin/lex
usr.bin/xlint
usr.bin/config
Other problems and possible solutions:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Symptom:Complaints involving a Makefile.
Fix: Rebuild usr.bin/make:
cd usr.bin/make && make && make install
Or, a failsafe method if that doesn't work:
cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
Fix: Make sure .mk files are up to date.
cd share/mk && make install
Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
Fix: Rebuild usr.bin/config
Symptom:
Fix: Rebuild usr.bin/yacc
Symptom:
Fix: Rebuild usr.bin/lex
Symptom:
Fix: rm /usr/lib/libbfd.a
Symptom:Obsolete intermediate files are used during compilation
Fix: Try the following sequence of commands in the directory in question.
make cleandir; rm `make print-objdir`; make cleandir; make obj
(If you built the tree without "make obj" in the past, obsolete files
may remain. The command tries to clean everything up)
Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible
pointer type
Fix: Rebuild and install usr.bin/menuc
Symptom:mklocale not found during build in share/locale/ctype
Fix: Build and install usr.bin/mklocale
Symptom:undefined reference to `__assert13' or `__unsetenv13'
Fix: Rebuild and install lib/libc
Symptom:usr.bin/config fails to build.
Fix: Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
Symptom:undefined reference to `getprogname' or `setprogname'
Fix: Rebuild and install lib/libc
Symptom:lint does not understand the '-X' option
Fix: May need to build & install libs with NOLINT=1 before rebuilding lint
Symptom:Update build fails in src/tools/gcc complaining that a variable
(e.g. CPPFLAGS) has changed since the previous run.
Fix: Run "nbmake-${ARCH} clean" in src/tools/gcc or do a clean build.
Symptom:cvs [update aborted]: cannot open directory /cvsroot/src/...:
No such file or directory.
Cause: If a directory is created by mistake, then it is sometimes
deleted from the CVS repository using administrative commands
that bypass the normal cvs access controls. If your cvs working tree
contains references to a directory that has been deleted on the
server in this way, then "cvs update" reports this error.
Fix: Recursively delete the affected directory from your working tree
and try the update again.