Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/arch/i386/isa/if_ec.c

778 lines
20 KiB
C
Raw Blame History

#include "ec.h"
#if NEC > 0
/*-
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Tim L. Tucker.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* A driver for the 3Com 3C503 (Etherlink II) ethernet adaptor.
*
* Written by Herb Peyerl (hpeyerl@novatel.cuc.ab.ca) on 04/25/92.
* (This is my first ever device driver and I couldn't have done
* it without the consumption of many "Brock Gummy Bears" so a
* big thanx to the "Brock Candy Company" of Chattanooga TN)
*
* This driver uses the Western Digital 8003 driver for a template
* since the two cards use the DP8390 chip by National. Everything
* is fairly similar except that the nic on the wd8003 appears to
* to see shared memory at 0x0000 and on the 3com, the nic sees it
* at 0x2000. Also, the 3c503 has it's own ASIC for controlling
* things like the IRQ level in software and whether to use the
* onboard xceiver or not. Since the Clarkson drivers do a very
* good rendition of a 3c503, I also scavenged a lot of ideas from
* there.
*
* Kludges:
* Since I couldn't really think of any non-creative way (other than
* using a #define) of configuring the board to use the onboard xceiver,
* I kludged the isa_device->unit to contain this information. Simply
* put, if bit-7 of isa_device->unit is set (>127) then the driver
* configures that unit to onboard-xceiver (BNC) and if <128 it assumes
* AUI. ec_attach informs the user of this on bootup. Also, ec_probe
* repairs this bit after obtaining it's information since I didn't know
* what else within the depths of the kernel would freak out if I left it.
*/
#include "param.h"
#include "mbuf.h"
#include "socket.h"
#include "ioctl.h"
#include "errno.h"
#include "syslog.h"
#include "net/if.h"
#include "net/netisr.h"
#ifdef INET
#include "netinet/in.h"
#include "netinet/in_systm.h"
#include "netinet/in_var.h"
#include "netinet/ip.h"
#include "netinet/if_ether.h"
#endif
#ifdef NS
#include "netns/ns.h"
#include "netns/ns_if.h"
#endif
#include "i386/isa/isa_device.h"
#include "i386/isa/if_ec.h"
/*
* Ethernet software status per interface.
*
* Each interface is referenced by a network interface structure,
* qe_if, which the routing code uses to locate the interface.
* This structure contains the output queue for the interface, its address, ...
*/
struct ec_softc {
struct arpcom ec_ac; /* Ethernet common part */
#define ec_if ec_ac.ac_if /* network-visible interface */
#define ec_addr ec_ac.ac_enaddr /* hardware Ethernet address */
u_char ec_flags; /* software state */
#define EC_RUNNING 0x01
#define EC_TXBUSY 0x02
u_char ec_type; /* interface type code */
u_short ec_vector; /* interrupt vector */
short ec_io_ctl_addr; /* i/o bus address, control */
short ec_io_nic_addr; /* i/o bus address, DS8390 */
short thick_or_thin; /* thick=0;thin=2 */
caddr_t ec_vmem_addr; /* card RAM virtual memory base */
u_long ec_vmem_size; /* card RAM bytes */
caddr_t ec_vmem_ring; /* receive ring RAM vaddress */
caddr_t ec_vmem_end; /* receive ring RAM end */
} ec_softc[NEC];
#define PAGE0 outb(sc->ec_io_nic_addr + EN_CCMD, ENC_NODMA|ENC_PAGE0);
#define PAGE1 outb(sc->ec_io_nic_addr + EN_CCMD, ENC_NODMA|ENC_PAGE1);
static Bdry;
int ether_output(),
ecprobe(),
ecattach(),
ecintr(),
ec_init(),
ec_ioctl(),
ec_reset(),
ec_watchdog(),
ec_start_output();
struct isa_driver ecdriver = {
ecprobe,
ecattach,
"ec",
};
ecprobe(is)
struct isa_device *is;
{
register struct ec_softc *sc = &ec_softc[is->id_unit&127];
int i, sum;
/*
* Set up the softc structure with card specific info.
* The 3Com asic is at base+0x400
*/
sc->ec_io_ctl_addr = is->id_iobase + 0x400;
sc->ec_io_nic_addr = is->id_iobase;
sc->ec_vector = is->id_irq;
sc->ec_vmem_addr = (caddr_t)is->id_maddr;
sc->ec_vmem_size = is->id_msize;
sc->ec_vmem_ring = sc->ec_vmem_addr + (EC_PAGE_SIZE * EC_TXBUF_SIZE);
sc->ec_vmem_end = sc->ec_vmem_addr + is->id_msize;
/*
* Now we get the MAC address. Assume thin ethernet unless told otherwise later.
*/
outb(sc->ec_io_ctl_addr + E33G_CNTRL, ECNTRL_RESET|2); /* Toggle reset bit on*/
DELAY(100);
outb(sc->ec_io_ctl_addr + E33G_CNTRL, 2); /* Toggle reset bit off */
DELAY(100);
outb(sc->ec_io_ctl_addr + E33G_CNTRL, ECNTRL_SAPROM|2); /* Map SA_PROM */
for (i=0;i<ETHER_ADDR_LEN; ++i)
sc->ec_addr[i] = inb(sc->ec_io_nic_addr + i);
outb(sc->ec_io_ctl_addr + E33G_CNTRL, 2); /* Disable SA_PROM */
outb(sc->ec_io_ctl_addr + E33G_GACFR, EGACFR_IRQOFF); /* tcm, rsel, mbs0, nim */
/*
* Stop the chip just in case.
*/
DELAY(1000);
PAGE0
outb(sc->ec_io_nic_addr + EN_CCMD, ENC_NODMA|ENC_STOP);
DELAY(1000);
/* Check cmd reg and fail if not right */
if ((i=inb(sc->ec_io_nic_addr + EN_CCMD)) != (ENC_NODMA|ENC_STOP))
return(0);
/*
* Test the shared memory.
*/
for(i = 0 ; i < sc->ec_vmem_size ; ++i)
sc->ec_vmem_addr[i] = 0x0;
for(sum=0, i=0; i<sc->ec_vmem_size; ++i)
sum += sc->ec_vmem_addr[i];
if(sum)
{
printf("ec%d: shared memory error (device conflict?)\n",
is->id_unit);
return(0);
}
/*
* All done.
*/
return(1);
}
ecattach(is)
struct isa_device *is;
{
register struct ec_softc *sc = &ec_softc[is->id_unit];
register struct ifnet *ifp = &sc->ec_if;
/**
** Initialize the ASIC in same order as Clarkson driver.
**/
/*
* Point vector pointer registers off into boonies.
*/
outb(sc->ec_io_ctl_addr + E33G_VP2, 0xff);
outb(sc->ec_io_ctl_addr + E33G_VP1, 0xff);
outb(sc->ec_io_ctl_addr + E33G_VP0, 0x0);
/*
* Set up control of shared memory, buffer ring, etc.
*/
outb(sc->ec_io_ctl_addr + E33G_STARTPG, EC_RXBUF_OFFSET);
outb(sc->ec_io_ctl_addr + E33G_STOPPG, EC_RXBUF_END);
/*
* Set up the IRQ and NBURST on the board.
* ( Not sure why we set up NBURST since we don't use DMA.)
*
* Normally we would is->id_irq<<2 but IRQ2 is defined as 0x200
* in icu.h so it's a special case.
*/
if(is->id_irq == 0x200)
outb(sc->ec_io_ctl_addr + E33G_IDCFR, 0x10);
else
outb(sc->ec_io_ctl_addr + E33G_IDCFR, is->id_irq << 2);
outb(sc->ec_io_ctl_addr + E33G_NBURST, 0x08); /* Set Burst to 8 */
outb(sc->ec_io_ctl_addr + E33G_DMAAH, 0x20);
outb(sc->ec_io_ctl_addr + E33G_DMAAL, 0x0);
/*
* Fill in the ifnet structure.
*/
ifp->if_unit = is->id_unit;
ifp->if_name = "ec" ;
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS;
ifp->if_init = ec_init;
ifp->if_output = ether_output;
ifp->if_start = ec_start_output;
ifp->if_ioctl = ec_ioctl;
ifp->if_reset = ec_reset;
ifp->if_watchdog = ec_watchdog;
/*
* Attach the interface to something. Have to figure this out later.
*/
if_attach(ifp);
/*
* Weeee.. We get to tell people we exist...
*/
printf(" address %s", ether_sprintf(sc->ec_addr));
}
ec_init(unit)
int unit;
{
register struct ec_softc *sc = &ec_softc[unit];
register struct ifnet *ifp = &sc->ec_if;
int i, s;
u_short ax, cx;
Bdry=0;
printf("ecinit");
/*
* Address not known.
*/
if(ifp->if_addrlist == (struct ifaddr *) 0)
return;
/*
* XXX (untested)
* select thick (e.g. AUI connector) if LLC0 bit is set
*/
if (ifp->if_flags & IFF_LLC0)
outb(sc->ec_io_ctl_addr + E33G_CNTRL, 0);
else
outb(sc->ec_io_ctl_addr + E33G_CNTRL, 2);
/*
* Set up the 8390 chip.
* (Use sequence recommended by 3Com. )
*/
s=splhigh();
PAGE0
outb(sc->ec_io_nic_addr + EN_CCMD, ENC_NODMA|ENC_PAGE0|ENC_STOP);
outb(sc->ec_io_nic_addr + EN0_DCFG, ENDCFG_BM8);
outb(sc->ec_io_nic_addr + EN0_RCNTLO, 0x0);
outb(sc->ec_io_nic_addr + EN0_RCNTHI, 0x0);
outb(sc->ec_io_nic_addr + EN0_RXCR, ENRXCR_MON );
outb(sc->ec_io_nic_addr + EN0_TXCR, 0x02);
outb(sc->ec_io_nic_addr + EN0_BOUNDARY, EC_RXBUF_OFFSET);
outb(sc->ec_io_nic_addr + EN0_TPSR, 0x20);
outb(sc->ec_io_nic_addr + EN0_STARTPG, EC_RXBUF_OFFSET);
outb(sc->ec_io_nic_addr + EN0_STOPPG, EC_RXBUF_END);
outb(sc->ec_io_nic_addr + EN0_ISR, 0xff);
outb(sc->ec_io_nic_addr + EN0_IMR, 0x3f);
/*
* Copy Ethernet address from SA_PROM into 8390 chip registers.
*/
PAGE1
for(i=0;i<6;i++)
outb(sc->ec_io_nic_addr + EN1_PHYS+i, sc->ec_addr[i]);
/*
* Set multicast filter mask bits in case promiscuous rcv wanted (???)
* (set to 0xff as in if_we.c)
*/
for(i=0;i<8;i++)
outb(sc->ec_io_nic_addr + EN1_MULT+i, 0xff);
/*
* Set current shared page for RX to work on.
*/
outb(sc->ec_io_nic_addr + EN1_CURPAG, EC_RXBUF_OFFSET);
/*
* Start the 8390. Clear Interrupt Status reg, and accept Broadcast
* packets.
*/
outb(sc->ec_io_nic_addr + EN_CCMD, ENC_START|ENC_PAGE0|ENC_NODMA);
outb(sc->ec_io_nic_addr + EN0_ISR, 0xff);
outb(sc->ec_io_nic_addr + EN0_TXCR, 0x0);
outb(sc->ec_io_nic_addr + EN0_RXCR, ENRXCR_BCST);
/*
* Take interface out of reset, program the vector,
* enable interrupts, and tell the world we are up.
*/
ifp->if_flags |= IFF_RUNNING;
outb(sc->ec_io_ctl_addr + E33G_GACFR, EGACFR_NORM); /* tcm, rsel, mbs0 */
(void) splx(s);
sc->ec_flags &= ~EC_TXBUSY;
ec_start_output(ifp);
}
ec_start_output(ifp)
struct ifnet *ifp;
{
register struct ec_softc *sc = &ec_softc[ifp->if_unit];
struct mbuf *m0, *m;
register caddr_t buffer;
int len, s;
int ec_cmd_reg;
/*
* The DS8390 only has one transmit buffer, if it is busy we
* must wait until the transmit interrupt completes.
*/
s=splhigh();
if(sc->ec_flags & EC_TXBUSY)
{
(void) splx(s);
return;
}
IF_DEQUEUE(&sc->ec_if.if_snd, m);
if(m == 0)
{
(void) splx(s);
return;
}
sc->ec_flags |= EC_TXBUSY;
(void) splx(s);
/*
* Copy the mbuf chain into the transmit buffer
*/
buffer = sc->ec_vmem_addr;
len = 0;
for(m0 = m; m!= 0; m = m->m_next)
{
bcopy(mtod(m, caddr_t), buffer, m->m_len);
buffer += m->m_len;
len += m->m_len;
}
m_freem(m0);
/*
* Init transmit length registers and set transmit start flag.
*/
s=splhigh();
len = MAX(len, ETHER_MIN_LEN);
PAGE0
outb(sc->ec_io_nic_addr + EN0_TCNTLO, len & 0xff);
outb(sc->ec_io_nic_addr + EN0_TCNTHI, len >> 8);
ec_cmd_reg = inb(sc->ec_io_nic_addr + EN_CCMD);
outb(sc->ec_io_nic_addr + EN_CCMD, ec_cmd_reg|ENC_TRANS);
(void) splx(s);
}
int ec_cmd_reg, ec_sts_reg;
/*
* Interrupt handler.
*/
ecintr(unit)
int unit;
{
register struct ec_softc *sc = &ec_softc[unit];
unit = 0;
/*
* Get current command register and interrupt status.
* Turn off interrupts while we take care of things.
*/
ec_cmd_reg = inb(sc->ec_io_nic_addr + EN_CCMD);
PAGE0
ec_sts_reg = inb(sc->ec_io_nic_addr + EN0_ISR);
outb(sc->ec_io_nic_addr + EN0_IMR, 0x0);
loop:
outb(sc->ec_io_nic_addr + EN0_ISR, ec_sts_reg);
/*
* have we lost ourselves somewhere?
*/
if (ec_sts_reg == 0xff)
ec_watchdog(unit);
/*
* Transmit error
*/
if(ec_sts_reg & ENISR_TX_ERR)
{
sc->ec_if.if_collisions += inb(sc->ec_io_nic_addr + EN0_TCNTLO);
++sc->ec_if.if_oerrors;
}
/*
* Receive Error
*/
if(ec_sts_reg & ENISR_RX_ERR)
{
(void) inb(sc->ec_io_nic_addr + 0xD);
(void) inb(sc->ec_io_nic_addr + 0xE);
(void) inb(sc->ec_io_nic_addr + 0xF);
++sc->ec_if.if_ierrors;
}
/*
* Normal transmit complete.
*/
if(ec_sts_reg&ENISR_TX || ec_sts_reg&ENISR_TX_ERR)
ectint(unit);
/*
* Normal receive notification
*/
if(ec_sts_reg&(ENISR_RX|ENISR_RX_ERR))
ecrint(unit);
/*
* Try to start transmit
*/
ec_start_output(&sc->ec_if);
/*
* Reenable onboard interrupts.
*/
/*PAGE0*/
outb(sc->ec_io_nic_addr + EN_CCMD, ec_cmd_reg);
outb(sc->ec_io_nic_addr + EN0_IMR, 0x3f);
if(ec_sts_reg=inb(sc->ec_io_nic_addr + EN0_ISR))
goto loop;
}
/*
* Transmit interrupt
*/
ectint(unit)
int unit;
{
register struct ec_softc *sc = &ec_softc[unit];
/*
* Do some statistics.
*/
PAGE0
sc->ec_flags &= ~EC_TXBUSY;
sc->ec_if.if_timer = 0;
++sc->ec_if.if_opackets;
sc->ec_if.if_collisions += inb(sc->ec_io_nic_addr + EN0_TCNTLO);
}
/*
* Receive interrupt.
* (This gave me the most trouble so excuse the mess.)
*/
ecrint(unit)
int unit;
{
register struct ec_softc *sc = &ec_softc[unit];
u_char bnry, curr;
int len;
struct ec_ring *ecr;
/*
* Traverse the receive ring looking for packets to pass back.
* The search is complete when we find a descriptor not in use.
*/
PAGE0
bnry = inb(sc->ec_io_nic_addr + EN0_BOUNDARY);
PAGE1
curr = inb(sc->ec_io_nic_addr + EN1_CURPAG);
if(Bdry)
bnry =Bdry;
while (bnry != curr)
{
/* get pointer to this buffer header structure */
ecr = (struct ec_ring *)(sc->ec_vmem_addr + ((bnry-EC_VMEM_OFFSET) << 8));
/* count includes CRC */
len = ecr->ec_count - 4;
/*if (len > 30 && len <= ETHERMTU+100) */
ecread(sc, (caddr_t)(ecr + 1), len);
/*else printf("reject:%x bnry:%x curr:%x", len, bnry, curr);*/
outofbufs:
PAGE0
/* advance on chip Boundry register */
if((caddr_t) ecr + EC_PAGE_SIZE - 1 > sc->ec_vmem_end) {
bnry = EC_RXBUF_OFFSET;
outb(sc->ec_io_nic_addr + EN0_BOUNDARY,
(sc->ec_vmem_size / EC_PAGE_SIZE) - 1 - EC_VMEM_OFFSET);
} else {
if (len > 30 && len <= ETHERMTU+100)
bnry = ecr->ec_next_packet;
else bnry = curr;
/* watch out for NIC overflow, reset Boundry if invalid */
if ((bnry - 1) < EC_RXBUF_OFFSET) {
outb(sc->ec_io_nic_addr + EN0_BOUNDARY,
(sc->ec_vmem_size / EC_PAGE_SIZE) - 1 - EC_VMEM_OFFSET);
bnry = EC_RXBUF_OFFSET;
} else
outb(sc->ec_io_nic_addr + EN0_BOUNDARY, bnry-1);
}
/* refresh our copy of CURR */
PAGE1
curr = inb(sc->ec_io_nic_addr + EN1_CURPAG);
}
Bdry = bnry;
PAGE0
}
#define ecdataaddr(sc, eh, off, type) \
((type) ((caddr_t)((eh)+1)+(off) >= (sc)->ec_vmem_end) ? \
(((caddr_t)((eh)+1)+(off))) - (sc)->ec_vmem_end \
+ (sc)->ec_vmem_ring: \
((caddr_t)((eh)+1)+(off)))
ecread(sc, buf, len)
register struct ec_softc *sc;
char *buf;
int len;
{
register struct ether_header *eh;
struct mbuf *m, *ecget();
int off, resid;
/*
* Deal with trailer protocol: if type is trailer type
* get true type from first 16-bit word past data.
* Remember that type was trailer by setting off.
*/
eh = (struct ether_header *)buf;
eh->ether_type = ntohs((u_short)eh->ether_type);
if (eh->ether_type >= ETHERTYPE_TRAIL &&
eh->ether_type < ETHERTYPE_TRAIL+ETHERTYPE_NTRAILER) {
off = (eh->ether_type - ETHERTYPE_TRAIL) * 512;
if (off >= ETHERMTU) return; /* sanity */
eh->ether_type = ntohs(*ecdataaddr(sc, eh, off, u_short *));
resid = ntohs(*(ecdataaddr(sc, eh, off+2, u_short *)));
if (off + resid > len) return; /* sanity */
len = off + resid;
} else off = 0;
len -= sizeof(struct ether_header);
if (len <= 0) return;
/*
* Pull packet off interface. Off is nonzero if packet
* has trailing header; neget will then force this header
* information to be at the front, but we still have to drop
* the type and length which are at the front of any trailer data.
*/
m = ecget(buf, len, off, &sc->ec_if, sc);
if (m == 0) return;
ether_input(&sc->ec_if, eh, m);
}
ec_ioctl(ifp, cmd, data)
register struct ifnet *ifp;
int cmd;
caddr_t data;
{
register struct ifaddr *ifa = (struct ifaddr *)data;
struct ec_softc *sc = &ec_softc[ifp->if_unit];
struct ifreq *ifr = (struct ifreq *)data;
int s=splimp(), error=0;
switch(cmd){
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
ec_init(ifp->if_unit); /* before arpwhohas */
((struct arpcom *)ifp)->ac_ipaddr =
IA_SIN(ifa)->sin_addr;
arpwhohas((struct arpcom *)ifp, &IA_SIN(ifa)->sin_addr);
break;
#endif
#ifdef NS
case AF_NS:
{
register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr);
if (ns_nullhost(*ina))
ina->x_host = *(union ns_host *)(sc->ns_addr);
else {
/*
* The manual says we can't change the address
* while the receiver is armed,
* so reset everything
*/
ifp->if_flags &= ~IFF_RUNNING;
bcopy((caddr_t)ina->x_host.c_host,
(caddr_t)sc->ns_addr, sizeof(sc->ns_addr));
}
ec_init(ifp->if_unit); /* does ne_setaddr() */
break;
}
#endif
default:
ec_init(ifp->if_unit);
break;
}
break;
case SIOCSIFFLAGS:
if ((ifp->if_flags & IFF_UP) == 0 &&
ifp->if_flags & IFF_RUNNING) {
ifp->if_flags &= ~IFF_RUNNING;
ec_stop(ifp->if_unit);
} else if (ifp->if_flags & IFF_UP &&
(ifp->if_flags & IFF_RUNNING) == 0)
ec_init(ifp->if_unit);
break;
#ifdef notdef
case SIOCGHWADDR:
bcopy((caddr_t)sc->sc_addr, (caddr_t) &ifr->ifr_data,
sizeof(sc->sc_addr));
break;
#endif
default:
error = EINVAL;
}
splx(s);
return (error);
}
ec_reset(unit)
int unit;
{
if(unit >= NEC)
return;
printf("ec%d: reset\n", unit);
ec_init(unit);
}
ec_watchdog(unit)
int unit;
{
log(LOG_WARNING, "ec%d: soft reset\n", unit);
ec_stop(unit);
ec_init(unit);
}
ec_stop(unit)
int unit;
{
register struct ec_softc *sc = &ec_softc[unit];
int s;
s=splimp();
PAGE0
outb(sc->ec_io_nic_addr + EN_CCMD, ENC_NODMA|ENC_STOP);
outb(sc->ec_io_nic_addr + EN0_IMR, 0x0);
sc->ec_flags &= ~EC_RUNNING;
/*
* Shutdown the 8390.
*/
(void) splx(s);
}
/*
* Pull read data off a interface.
* Len is length of data, with local net header stripped.
* Off is non-zero if a trailer protocol was used, and
* gives the offset of the trailer information.
* We copy the trailer information and then all the normal
* data into mbufs. When full cluster sized units are present
* we copy into clusters.
*/
struct mbuf *
ecget(buf, totlen, off0, ifp, sc)
caddr_t buf;
int totlen, off0;
struct ifnet *ifp;
struct ec_softc *sc;
{
struct mbuf *top, **mp, *m, *p;
int off = off0, len;
register caddr_t cp = buf;
char *epkt;
int tc =totlen;
buf += sizeof(struct ether_header);
cp = buf;
epkt = cp + totlen;
if (off) {
cp += off + 2 * sizeof(u_short);
totlen -= 2 * sizeof(u_short);
}
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == 0)
return (0);
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = totlen;
m->m_len = MHLEN;
top = 0;
mp = &top;
while (totlen > 0) {
if (top) {
MGET(m, M_DONTWAIT, MT_DATA);
if (m == 0) {
m_freem(top);
return (0);
}
m->m_len = MLEN;
}
len = min(totlen, epkt - cp);
if (len >= MINCLSIZE) {
MCLGET(m, M_DONTWAIT);
if (m->m_flags & M_EXT)
m->m_len = len = min(len, MCLBYTES);
else
len = m->m_len;
} else {
/*
* Place initial small packet/header at end of mbuf.
*/
if (len < m->m_len) {
if (top == 0 && len + max_linkhdr <= m->m_len)
m->m_data += max_linkhdr;
m->m_len = len;
} else
len = m->m_len;
}
totlen -= len;
/* only do up to end of buffer */
if (cp+len > sc->ec_vmem_end) {
unsigned toend = sc->ec_vmem_end - cp;
bcopy(cp, mtod(m, caddr_t), toend);
cp = sc->ec_vmem_ring;
bcopy(cp, mtod(m, caddr_t)+toend, len - toend);
cp += len - toend;
epkt = cp + totlen;
} else {
bcopy(cp, mtod(m, caddr_t), (unsigned)len);
cp += len;
}
*mp = m;
mp = &m->m_next;
if (cp == epkt) {
cp = buf;
epkt = cp + tc;
}
}
return (top);
}
#endif /* NEC > 0 */
Reference in New Issue View Git Blame Copy Permalink