NetBSD/sys/arch/atari/conf/MILAN-ISAIDE

256 lines
9.2 KiB
Plaintext

#
# $NetBSD: MILAN-ISAIDE,v 1.6 2001/11/20 11:30:44 lukem Exp $
#
# This file was automatically created. Changes will be
# lost when running makeconf in this directory.
#
# Created from:
# NetBSD: MILAN.in,v 1.8 2001/11/20 11:29:41 lukem Exp $
# NetBSD: GENERIC.in,v 1.10 2001/11/20 11:29:41 lukem Exp $
#This configuration file is for a generic Milan
#Generic atari
include "arch/atari/conf/std.milan"
#Add support for about 16 users. This variable is used to size
#various kernel structures.
maxusers 16
options HZ=64 # Set the clock-rate (48/64/96)
#X11R6 related options
options UCONSOLE # Allow xconsole to work
#Standard system options
options INSECURE # disable kernel security levels
#options NTP # NTP phase/frequency locked loop
#(Co)processors this kernel should support
options M68040 # support for 040
options M68060 # support for 060
options FPSP # 68040 Floatingpoint support
options M060SP # MC68060 software support (Required for 060)
#Networking options
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options GATEWAY # packet forwarding
#options MROUTING # IP multicast routing
options NS # XNS
#options NSIP # XNS tunneling over IP
options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
options CCITT,LLC,HDLC # X.25
options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
#options IPFILTER_DEFAULT_BLOCK # block packages by default
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
#File systems
file-system FFS # Berkeley fast file system
file-system MFS # Memory based filesystem
file-system KERNFS # Kernel parameter filesystem
file-system MSDOSFS # MSDOS filesystem
file-system CD9660 # ISO 9660 filesystem with Rock Ridge
file-system NFS # Network File System client side code
file-system PROCFS # Process filesystem
file-system FDESC # /dev/fd
file-system NULLFS # Loopback filesystem
file-system OVERLAY # overlay filesystem
file-system UNION # union file system
file-system UMAPFS # null file system (with uid & gid remapping)
file-system PORTAL # portal file system
file-system EXT2FS # second extended file system (linux)
file-system LFS # log-structured file system
#File system options
options QUOTA # Disk quotas for local disks
#options FFS_EI # FFS Endian Independant support
options SOFTDEP # FFS soft updates support.
options NFSSERVER # Network File System server side code
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
#Misc. debugging options
options PANICWAIT # Require keystroke to dump/reboot
options DDB # Kernel debugger
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
#options DEBUG # expensive debugging checks/support
#Compatibility options for various existing systems
options COMPAT_43 # 4.3 BSD compatible system calls (required)
options COMPAT_10 # Compatibility to NetBSD1.0
options COMPAT_11 # Compatibility to NetBSD1.1
options COMPAT_12 # Compatibility to NetBSD1.2
options COMPAT_13 # Compatibility to NetBSD1.3
options COMPAT_14 # Compatibility to NetBSD1.4
#options COMPAT_09 # has no meaning on the atari
#options COMPAT_SUNOS # Support to run Sun-3 executables
#options COMPAT_SVR4 # Support to run SVR4 executables
#options COMPAT_LINUX # Support to run Linux/m68k executables
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
options COMPAT_AOUT_M68K # Compatibility to a.out executables
options EXEC_AOUT # a.out format executables
#Support for System V IPC facilities.
options SYSVSHM # System V shared memory
options SYSVMSG # System V messages
options SYSVSEM # System V semaphores
#options SEMMNI=10 # number of semaphore identifiers
#options SEMUME=10 # max number of undo entries per proc.
#options SEMMNU=30 # number of undo structures in system
#Support for various kernel options
options KTRACE # Add kernel tracing system call
options DIAGNOSTIC # Add additional error checking code
#These options enable verbose messages for several subsystems.
#Warning, these may compile large string tables into the kernel!
options SCSIVERBOSE # human readable SCSI error messages
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
#Atari specific options
#options KFONT_8x8 # Use 8x8 font instead of 8x16
options ST_POOL_SIZE=22 # smallest that allows TT-HIGH
options MEMORY_DISK_HOOKS # Boot RAM-disk
options DISKLABEL_NBDA # NetBSD disklabels (required)
options DISKLABEL_AHDI # NetBSD/AHDI disklabels
options SERCONSOLE # modem1 console support
options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM
options STATCLOCK # Separate {stat,prof}clock
#Try linked commands on all targets
options TRY_SCSI_LINKED_COMMANDS=0x7f
#Build one kernel that can boot from any disk.
config netbsd root on ? type ?
pseudo-device sl # Slip
pseudo-device ppp # ppp
pseudo-device pty # pseudo-terminals
pseudo-device loop # Loopback network
pseudo-device vnd 3 # 3 pseudo disks (see vnconfig)
pseudo-device md 2 # Boot memory disk
pseudo-device bpfilter 2 # berkeley packet filters
pseudo-device tun 2 # network tunnel
#pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
#pseudo-device bridge # simple inter-network bridging
pseudo-device ccd 4 # concatenating disk driver
#pseudo-device raid 4 # RAIDframe disk driver
#options RAID_AUTOCONFIG # auto-configuration of RAID components
pseudo-device ipfilter # IP filtering device
pseudo-device rnd # /dev/random and in-kernel generator
#Hardware options for GENERIC are in the various machine type specific files
#For the moment, the MILAN will be the only one to use wscons, so define
#the wscons options here too for the moment.
#wscons options
#builtin terminal emulations
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
#different kernel output - see dev/wscons/wsdisplayvar.h
#XXX: Since the Milan VGA works in monochrome for the moment, _only_
#use black and white here!
options WS_KERNEL_FG=WSCOL_WHITE
options WS_KERNEL_BG=WSCOL_BLACK
#compatibility to other console drivers
#options WSDISPLAY_COMPAT_USL # VT handling
#options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
#see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
#allocate a number of virtual screens at autoconfiguration time
options WSDISPLAY_DEFAULTSCREENS=4
#use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
#modify the screen type of the console; defaults to "80x25"
#options VGA_CONSOLE_SCREENTYPE="\"80x25\""
#The following sections describe various hardware options.
isabus0 at mainbus0 # ISA-bus
isa0 at isabus0
pcibus0 at mainbus0 # PCI-bus
pci0 at pcibus0
ser0 at mainbus0
fdcisa0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy contr.
fdisa0 at fdcisa0 drive 0
#Ok, the stuff below requires some explanation...
#Initially, when Atari started with IDE on the Falcon, they decided to
#swap the bytelanes on the IDE controller. So all data on the disk was
#byteswapped and all CDROM drivers had to byteswap the data to make
#this nice idea work... To remain compatible with the 'current' drivers,
#this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan
#however, the change was reverted. But... now the hardware is connected to
#a little endian (ISA) bus, in PIO mode this is essentially the same as
#swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode
#provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data
#on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER
#developers have thought up a solution, you can make a byteswapped disk
#during the partioning with HDDRIVER and TOS supports booting from it!
#Ok, now you have to choose:
#- If _none_ of your disks are marked byteswapped by HDDRIVER, choose
#the 1 version.
#- If _all_ of your disks are byteswapped, use the MILAN_PCIIDE version
#The is no way to mix things!
#wdc on ISA with flags = WDC_OPTIONS_ATA_NOSTREAM!
wdc0 at isa? port 0x1f0 irq 14 flags 0x04 # 1st IDE controller
wdc1 at isa? port 0x170 irq 15 flags 0x04 # 2nd IDE controller
wd* at wdc? channel ? drive ?
atapibus* at wdc? channel ? # ATAPI bus support
#The Milan uses wscons
#XXX without the __HAVE_NWSCONS option, the keyboard won't work...
options __HAVE_NWSCONS
vga0 at pci? dev ? function ? # a PCI VGA card
wsdisplay* at vga? console ? # as a wscons console
pckbc0 at isa? # PC keyboard controller
pckbd* at pckbc? # PC keyboard
wskbd* at pckbd? console ? # wscons keyboard
#ATAPI devices
cd* at atapibus? drive ? # ATAPI CD-ROM drives