NetBSD/sys/arch/amiga/dev/bzivsc.c

502 lines
13 KiB
C

/* $NetBSD: bzivsc.c,v 1.4 1998/05/24 19:32:35 is Exp $ */
/*
* Copyright (c) 1997 Michael L. Hitch
* Copyright (c) 1982, 1990 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product contains software written by Michael L. Hitch for
* the NetBSD project.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/queue.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/scsipi/scsi_message.h>
#include <machine/cpu.h>
#include <machine/param.h>
#include <dev/ic/ncr53c9xreg.h>
#include <dev/ic/ncr53c9xvar.h>
#include <amiga/amiga/isr.h>
#include <amiga/dev/bzivscvar.h>
#include <amiga/dev/zbusvar.h>
void bzivscattach __P((struct device *, struct device *, void *));
int bzivscmatch __P((struct device *, struct cfdata *, void *));
/* Linkup to the rest of the kernel */
struct cfattach bzivsc_ca = {
sizeof(struct bzivsc_softc), bzivscmatch, bzivscattach
};
struct scsipi_adapter bzivsc_switch = {
ncr53c9x_scsi_cmd,
minphys, /* no max at this level; handled by DMA code */
NULL,
NULL,
};
struct scsipi_device bzivsc_dev = {
NULL, /* Use default error handler */
NULL, /* have a queue, served by this */
NULL, /* have no async handler */
NULL, /* Use default 'done' routine */
};
/*
* Functions and the switch for the MI code.
*/
u_char bzivsc_read_reg __P((struct ncr53c9x_softc *, int));
void bzivsc_write_reg __P((struct ncr53c9x_softc *, int, u_char));
int bzivsc_dma_isintr __P((struct ncr53c9x_softc *));
void bzivsc_dma_reset __P((struct ncr53c9x_softc *));
int bzivsc_dma_intr __P((struct ncr53c9x_softc *));
int bzivsc_dma_setup __P((struct ncr53c9x_softc *, caddr_t *,
size_t *, int, size_t *));
void bzivsc_dma_go __P((struct ncr53c9x_softc *));
void bzivsc_dma_stop __P((struct ncr53c9x_softc *));
int bzivsc_dma_isactive __P((struct ncr53c9x_softc *));
struct ncr53c9x_glue bzivsc_glue = {
bzivsc_read_reg,
bzivsc_write_reg,
bzivsc_dma_isintr,
bzivsc_dma_reset,
bzivsc_dma_intr,
bzivsc_dma_setup,
bzivsc_dma_go,
bzivsc_dma_stop,
bzivsc_dma_isactive,
0,
};
/* Maximum DMA transfer length to reduce impact on high-speed serial input */
u_long bzivsc_max_dma = 1024;
extern int ser_open_speed;
u_long bzivsc_cnt_pio = 0; /* number of PIO transfers */
u_long bzivsc_cnt_dma = 0; /* number of DMA transfers */
u_long bzivsc_cnt_dma2 = 0; /* number of DMA transfers broken up */
u_long bzivsc_cnt_dma3 = 0; /* number of pages combined */
#ifdef DEBUG
struct {
u_char hardbits;
u_char status;
u_char xx;
u_char yy;
} bzivsc_trace[128];
int bzivsc_trace_ptr = 0;
int bzivsc_trace_enable = 1;
void bzivsc_dump __P((void));
#endif
/*
* if we are a Phase5 Blizzard 12x0-IV
*/
int
bzivscmatch(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
struct zbus_args *zap;
volatile u_char *regs;
zap = aux;
if (zap->manid != 0x2140)
return(0); /* It's not Phase 5 */
if (zap->prodid != 11 && zap->prodid != 17)
return(0); /* Not Blizzard 12x0 */
if (!is_a1200())
return(0); /* And not A1200 */
regs = &((volatile u_char *)zap->va)[0x8000];
if (badaddr((caddr_t)regs))
return(0);
regs[NCR_CFG1 * 4] = 0;
regs[NCR_CFG1 * 4] = NCRCFG1_PARENB | 7;
delay(5);
if (regs[NCR_CFG1 * 4] != (NCRCFG1_PARENB | 7))
return(0);
return(1);
}
/*
* Attach this instance, and then all the sub-devices
*/
void
bzivscattach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct bzivsc_softc *bsc = (void *)self;
struct ncr53c9x_softc *sc = &bsc->sc_ncr53c9x;
struct zbus_args *zap;
extern u_long scsi_nosync;
extern int shift_nosync;
extern int ncr53c9x_debug;
/*
* Set up the glue for MI code early; we use some of it here.
*/
sc->sc_glue = &bzivsc_glue;
/*
* Save the regs
*/
zap = aux;
bsc->sc_reg = &((volatile u_char *)zap->va)[0x8000];
bsc->sc_dmabase = &bsc->sc_reg[0x8000];
sc->sc_freq = 40; /* Clocked at 40Mhz */
printf(": address %p", bsc->sc_reg);
sc->sc_id = 7;
/*
* It is necessary to try to load the 2nd config register here,
* to find out what rev the FAS chip is, else the ncr53c9x_reset
* will not set up the defaults correctly.
*/
sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_FE;
sc->sc_cfg3 = 0x08 /*FCLK*/ | NCRESPCFG3_FSCSI | NCRESPCFG3_CDB;
sc->sc_rev = NCR_VARIANT_FAS216;
/*
* This is the value used to start sync negotiations
* Note that the NCR register "SYNCTP" is programmed
* in "clocks per byte", and has a minimum value of 4.
* The SCSI period used in negotiation is one-fourth
* of the time (in nanoseconds) needed to transfer one byte.
* Since the chip's clock is given in MHz, we have the following
* formula: 4 * period = (1000 / freq) * 4
*/
sc->sc_minsync = 1000 / sc->sc_freq;
/*
* get flags from -I argument and set cf_flags.
* NOTE: low 8 bits are to disable disconnect, and the next
* 8 bits are to disable sync.
*/
sc->sc_dev.dv_cfdata->cf_flags |= (scsi_nosync >> shift_nosync)
& 0xffff;
shift_nosync += 16;
/* Use next 16 bits of -I argument to set ncr53c9x_debug flags */
ncr53c9x_debug |= (scsi_nosync >> shift_nosync) & 0xffff;
shift_nosync += 16;
#if 1
if (((scsi_nosync >> shift_nosync) & 0xff00) == 0xff00)
sc->sc_minsync = 0;
#endif
/* Really no limit, but since we want to fit into the TCR... */
sc->sc_maxxfer = 64 * 1024;
/*
* Configure interrupts.
*/
bsc->sc_isr.isr_intr = (int (*)(void *))ncr53c9x_intr;
bsc->sc_isr.isr_arg = sc;
bsc->sc_isr.isr_ipl = 2;
add_isr(&bsc->sc_isr);
/*
* Now try to attach all the sub-devices
*/
ncr53c9x_attach(sc, &bzivsc_switch, &bzivsc_dev);
}
/*
* Glue functions.
*/
u_char
bzivsc_read_reg(sc, reg)
struct ncr53c9x_softc *sc;
int reg;
{
struct bzivsc_softc *bsc = (struct bzivsc_softc *)sc;
return bsc->sc_reg[reg * 4];
}
void
bzivsc_write_reg(sc, reg, val)
struct ncr53c9x_softc *sc;
int reg;
u_char val;
{
struct bzivsc_softc *bsc = (struct bzivsc_softc *)sc;
u_char v = val;
bsc->sc_reg[reg * 4] = v;
#ifdef DEBUG
if (bzivsc_trace_enable/* && sc->sc_nexus && sc->sc_nexus->xs->flags & SCSI_POLL*/ &&
reg == NCR_CMD/* && bsc->sc_active*/) {
bzivsc_trace[(bzivsc_trace_ptr - 1) & 127].yy = v;
/* printf(" cmd %x", v);*/
}
#endif
}
int
bzivsc_dma_isintr(sc)
struct ncr53c9x_softc *sc;
{
struct bzivsc_softc *bsc = (struct bzivsc_softc *)sc;
if ((bsc->sc_reg[NCR_STAT * 4] & NCRSTAT_INT) == 0)
return 0;
#ifdef DEBUG
if (/*sc->sc_nexus && sc->sc_nexus->xs->flags & SCSI_POLL &&*/ bzivsc_trace_enable) {
bzivsc_trace[bzivsc_trace_ptr].status = bsc->sc_reg[NCR_STAT * 4];
bzivsc_trace[bzivsc_trace_ptr].xx = bsc->sc_reg[NCR_CMD * 4];
bzivsc_trace[bzivsc_trace_ptr].yy = bsc->sc_active;
bzivsc_trace_ptr = (bzivsc_trace_ptr + 1) & 127;
}
#endif
return 1;
}
void
bzivsc_dma_reset(sc)
struct ncr53c9x_softc *sc;
{
struct bzivsc_softc *bsc = (struct bzivsc_softc *)sc;
bsc->sc_active = 0;
}
int
bzivsc_dma_intr(sc)
struct ncr53c9x_softc *sc;
{
register struct bzivsc_softc *bsc = (struct bzivsc_softc *)sc;
register int cnt;
NCR_DMA(("bzivsc_dma_intr: cnt %d int %x stat %x fifo %d ",
bsc->sc_dmasize, sc->sc_espintr, sc->sc_espstat,
bsc->sc_reg[NCR_FFLAG * 4] & NCRFIFO_FF));
if (bsc->sc_active == 0) {
printf("bzivsc_intr--inactive DMA\n");
return -1;
}
/* update sc_dmaaddr and sc_pdmalen */
cnt = bsc->sc_reg[NCR_TCL * 4];
cnt += bsc->sc_reg[NCR_TCM * 4] << 8;
cnt += bsc->sc_reg[NCR_TCH * 4] << 16;
if (!bsc->sc_datain) {
cnt += bsc->sc_reg[NCR_FFLAG * 4] & NCRFIFO_FF;
bsc->sc_reg[NCR_CMD * 4] = NCRCMD_FLUSH;
}
cnt = bsc->sc_dmasize - cnt; /* number of bytes transferred */
NCR_DMA(("DMA xferred %d\n", cnt));
if (bsc->sc_xfr_align) {
bcopy(bsc->sc_alignbuf, *bsc->sc_dmaaddr, cnt);
bsc->sc_xfr_align = 0;
}
*bsc->sc_dmaaddr += cnt;
*bsc->sc_pdmalen -= cnt;
bsc->sc_active = 0;
return 0;
}
int
bzivsc_dma_setup(sc, addr, len, datain, dmasize)
struct ncr53c9x_softc *sc;
caddr_t *addr;
size_t *len;
int datain;
size_t *dmasize;
{
struct bzivsc_softc *bsc = (struct bzivsc_softc *)sc;
vm_offset_t pa;
u_char *ptr;
size_t xfer;
bsc->sc_dmaaddr = addr;
bsc->sc_pdmalen = len;
bsc->sc_datain = datain;
bsc->sc_dmasize = *dmasize;
/*
* DMA can be nasty for high-speed serial input, so limit the
* size of this DMA operation if the serial port is running at
* a high speed (higher than 19200 for now - should be adjusted
* based on cpu type and speed?).
* XXX - add serial speed check XXX
*/
if (ser_open_speed > 19200 && bzivsc_max_dma != 0 &&
bsc->sc_dmasize > bzivsc_max_dma)
bsc->sc_dmasize = bzivsc_max_dma;
ptr = *addr; /* Kernel virtual address */
pa = kvtop(ptr); /* Physical address of DMA */
xfer = min(bsc->sc_dmasize, NBPG - (pa & (NBPG - 1)));
bsc->sc_xfr_align = 0;
/*
* If output and unaligned, stuff odd byte into FIFO
*/
if (datain == 0 && (int)ptr & 1) {
NCR_DMA(("bzivsc_dma_setup: align byte written to fifo\n"));
pa++;
xfer--; /* XXXX CHECK THIS !!!! XXXX */
bsc->sc_reg[NCR_FIFO * 4] = *ptr++;
}
/*
* If unaligned address, read unaligned bytes into alignment buffer
*/
else if ((int)ptr & 1) {
pa = kvtop((caddr_t)&bsc->sc_alignbuf);
xfer = bsc->sc_dmasize = min(xfer, sizeof (bsc->sc_alignbuf));
NCR_DMA(("bzivsc_dma_setup: align read by %d bytes\n", xfer));
bsc->sc_xfr_align = 1;
}
++bzivsc_cnt_dma; /* number of DMA operations */
while (xfer < bsc->sc_dmasize) {
if ((pa + xfer) != kvtop(*addr + xfer))
break;
if ((bsc->sc_dmasize - xfer) < NBPG)
xfer = bsc->sc_dmasize;
else
xfer += NBPG;
++bzivsc_cnt_dma3;
}
if (xfer != *len)
++bzivsc_cnt_dma2;
bsc->sc_dmasize = xfer;
*dmasize = bsc->sc_dmasize;
bsc->sc_pa = pa;
#if defined(M68040) || defined(M68060)
if (mmutype == MMU_68040) {
if (bsc->sc_xfr_align) {
dma_cachectl(bsc->sc_alignbuf,
sizeof(bsc->sc_alignbuf));
}
else
dma_cachectl(*bsc->sc_dmaaddr, bsc->sc_dmasize);
}
#endif
pa >>= 1;
if (!bsc->sc_datain)
pa |= 0x80000000;
bsc->sc_dmabase[0x8000] = (u_int8_t)(pa >> 24);
bsc->sc_dmabase[0] = (u_int8_t)(pa >> 24);
bsc->sc_dmabase[0] = (u_int8_t)(pa >> 16);
bsc->sc_dmabase[0] = (u_int8_t)(pa >> 8);
bsc->sc_dmabase[0] = (u_int8_t)(pa);
bsc->sc_active = 1;
return 0;
}
void
bzivsc_dma_go(sc)
struct ncr53c9x_softc *sc;
{
}
void
bzivsc_dma_stop(sc)
struct ncr53c9x_softc *sc;
{
}
int
bzivsc_dma_isactive(sc)
struct ncr53c9x_softc *sc;
{
struct bzivsc_softc *bsc = (struct bzivsc_softc *)sc;
return bsc->sc_active;
}
#ifdef DEBUG
void
bzivsc_dump()
{
int i;
i = bzivsc_trace_ptr;
printf("bzivsc_trace dump: ptr %x\n", bzivsc_trace_ptr);
do {
if (bzivsc_trace[i].hardbits == 0) {
i = (i + 1) & 127;
continue;
}
printf("%02x%02x%02x%02x(", bzivsc_trace[i].hardbits,
bzivsc_trace[i].status, bzivsc_trace[i].xx, bzivsc_trace[i].yy);
if (bzivsc_trace[i].status & NCRSTAT_INT)
printf("NCRINT/");
if (bzivsc_trace[i].status & NCRSTAT_TC)
printf("NCRTC/");
switch(bzivsc_trace[i].status & NCRSTAT_PHASE) {
case 0:
printf("dataout"); break;
case 1:
printf("datain"); break;
case 2:
printf("cmdout"); break;
case 3:
printf("status"); break;
case 6:
printf("msgout"); break;
case 7:
printf("msgin"); break;
default:
printf("phase%d?", bzivsc_trace[i].status & NCRSTAT_PHASE);
}
printf(") ");
i = (i + 1) & 127;
} while (i != bzivsc_trace_ptr);
printf("\n");
}
#endif