NetBSD/sys/dev/ic/i82595reg.h

233 lines
6.3 KiB
C

/* $NetBSD: i82595reg.h,v 1.5 2001/03/16 13:43:31 is Exp $ */
/*-
* Copyright (c) 1996 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Ignatios Souvatzis.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Intel 82595 Ethernet chip register, bit, and structure definitions.
*
* Written by is with reference to Intel's i82595FX data sheet, with some
* clarification coming from looking at the Clarkson Packet Driver code for this
* chip written by Russ Nelson and others;
*
* and
*
* configuration EEPROM layout. Written with reference to Intels
* public "LAN595 Hardware and Software Specifications" document.
*/
/* registers */
/* bank0 */
#define COMMAND_REG 0 /* available in any bank */
#define MC_SETUP_CMD 0x03
#define XMT_CMD 0x04
#define TDR_CMD 0x05
#define DUMP_CMD 0x06
#define DIAG_CMD 0x07
#define RCV_ENABLE_CMD 0x08
#define RCV_DISABLE_CMD 0x0a
#define RCV_STOP_CMD 0x0b
#define RESET_CMD 0x0e
#define TRISTATE_CMD 0x16
#define NO_TRISTATE_CMD 0x17
#define POWER_DOWN_CMD 0x18
#define SLEEP_MODE_CMD 0x19
#define NEGOTIATE_CMD 0x1a
#define RESUME_XMT_CMD 0x1c
#define SEL_RESET_CMD 0x1e
#define BANK_SEL(n) (n<<6) /* 0, 1, 2 */
#define STATUS_REG 1
#define RX_STP_INT 0x01
#define RX_INT 0x02
#define TX_INT 0x04
#define EXEC_INT 0x08
#define EXEC_STATUS 0x30
#define ID_REG 2
#define ID_REG_MASK 0x2c
#define ID_REG_SIG 0x24
#define R_ROBIN_BITS 0xc0
#define R_ROBIN_SHIFT 6
#define AUTO_ENABLE 0x10
#define INT_MASK_REG 3
#define RX_STOP_BIT 0x01
#define RX_BIT 0x02
#define TX_BIT 0x04
#define EXEC_BIT 0x08
#define ALL_INTS 0x0f
#define RCV_START_LOW 4
#define RCV_START_HIGH 5
#define RCV_STOP_LOW 6
#define RCV_STOP_HIGH 7
#define RCV_COPY_THRESHOLD 8 /* byte */
#define XMT_ADDR_REG 0x0a
#define HOST_ADDR_REG 0x0c
#define MEM_PORT_REG 0x0e
/* -------------------- bank1 -------------------- */
#define REG1 1
#define WORD_WIDTH 0x02
#define INT_ENABLE 0x80
#define INT_NO_REG 2
#define RCV_LOWER_LIMIT_REG 8
#define RCV_UPPER_LIMIT_REG 9
#define XMT_LOWER_LIMIT_REG 10
#define XMT_UPPER_LIMIT_REG 11
/* bank2 */
/* reg1, apparently */
#define XMT_CHAIN_INT 0x20 /* interupt at end of xmt chain */
#define XMT_CHAIN_ERRSTOP 0x40 /* int at end of chain even if err */
#define RCV_DISCARD_BAD 0x80 /* Throw bad frames away and continue */
#define RECV_MODES_REG 2
#define PROMISC_MODE 0x01
#define NO_BRDCST 0x02
#define NO_RX_CRC 0x04
#define NO_ADD_INS 0x10
#define MULTI_IA 0x20
#define MATCH_ID (NO_ADD_INS | NO_RX_CRC | NO_BRDCST)
#define MATCH_BRDCST (NO_ADD_INS | NO_RX_CRC)
#define MATCH_MULTI (NO_ADD_INS | NO_RX_CRC | MULTI_IA)
#define MATCH_ALL (NO_ADD_INS | NO_RX_CRC | PROMISC_MODE)
#define MEDIA_SELECT 3
#define TPE_BIT 0x04
#define BNC_BIT 0x20
#define TEST_MODE_MASK 0x3f
#define I_ADD(n) (n+4) /* 0..5 -> 4..9 */
#define EEPROM_REG 10
#define EEDO 8
#define EEDI 4
#define EECS 2
#define EESK 1
/*
* EEPROM layout. Written with reference to Intels public "LAN595 Hardware and
* Software Specifications" document.
*/
#define EEPPW0 0
#define EEPP_BusWidth 0x0004
#define EEPP_FlashAdrs 0x0038
#define EEPP_FLASHTRANSFORM {-1, -1, 0xC8000, 0xCC000, 0xD0000, \
0xD4000, 0xD8000, 0xDC000}
#define EEPP_AutoIO 0x0040
#define EEPP_IOMapping 0xfc00
#define EEPPW1 1
#define EEPP_Int 0x0007
#define EEPP_INTMAP {3, 5, 9, 10, 11, -1, -1, -1}
#define EEPP_RINTMAP {0xff, 0xff, 0x02, 0x00, 0xff, 0x01, 0xff, \
0xff, 0xff, 0x02, 0x03, 0x04 }
#define EEPP_LinkInteg 0x0008
#define EEPP_PolarCorr 0x0010
#define EEPP_AuiTpe 0x0020
#define EEPP_Jabber 0x0040
#define EEPP_AutoPort 0x0080
#define EEPP_SmOut 0x0100
#define EEPP_BootFls 0x0200
#define EEPP_DramSize 0x1000
#define EEPP_AltReady 0x2000
#define EEPPEther2 2
#define EEPPEther1 3
#define EEPPEther0 4
#define EEPPEther2a 0x3c
#define EEPPEther1a 0x3d
#define EEPPEther0a 0x3e
#define EEPPW5 5
#define EEPP_BncTpe 0x0001
#define EEPP_RomSlct 0x0006 /* none, NetWare, NDIS, rsrvd. */
#define EEPP_NumConn 0x0008 /* 0=2, 1=3 */
#define EEPW6 6
#define EEPP_BoardRev 0x00FF
#define EEPP_LENGTH 0x40
#define EEPP_CHKSUM 0xBABA /* Intel claim 0x0, but this seems to be wrong */
#define RCV_NO_RSC_REG 11
/* How many packets were dropped due to insufficient space */
/* ---- xmt /rcv /exec buffer format ---- */
#define I595_XMT_HDRLEN 8
#define CMD_MASK 0x001f
#define TX_DONE 0x0080
#define CHAIN 0x8000
#define XMT_STATUS 0x02
#define XMT_CHAIN 0x04
#define XMT_COUNT 0x06
#define I595_RCV_HDRLEN 8
#define RCV_DONE 0x0008
#define RX_OK 0x2000
#define RX_ERR 0x0d81