NetBSD/sys/dev/audio_if.h
kent 23b5d91433 merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework


Summary of changes:

* struct audio_params
  - remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels.  Conversion information
is conveyed by stream_filter_list_t.
  - change the type of sample_rate: u_long -> u_int
  - add `validbits,' which represents the valid data size in
precision bits.  It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.

* audio_hw_if
 - add two parameters to set_params()
	stream_filter_list_t *pfil, stream_filter_list *rfil
   A HW driver should set filter recipes for requested formats
 - constify audio_params parameters of trigger_output() and
trigger_input().  They represent audio formats for the hardware.
 - make open() and close() optional
 - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
 to round_blocksize()

* sw_code is replaced with stream_filter_t.
  stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
  converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t

* MI audio
 - audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
 - audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
 - audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
 - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.

* add `struct device *' parameter to ac97_attach()

* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-10 22:01:36 +00:00

284 lines
8.7 KiB
C

/* $NetBSD: audio_if.h,v 1.55 2005/01/10 22:01:37 kent Exp $ */
/*
* Copyright (c) 1994 Havard Eidnes.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the Computer Systems
* Engineering Group at Lawrence Berkeley Laboratory.
* 4. Neither the name of the University nor of the Laboratory may be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#ifndef _SYS_DEV_AUDIO_IF_H_
#define _SYS_DEV_AUDIO_IF_H_
#include <sys/types.h>
#include <sys/audioio.h>
/* check we have an audio(4) configured into kernel */
#if defined(_KERNEL_OPT)
#include "audio.h"
#if (NAUDIO == 0) && (NMIDI == 0) && (NMIDIBUS == 0)
#error "No 'audio* at audiobus?' or 'midi* at midibus?' or similar configured"
#endif
#endif /* _KERNEL_OPT */
/*
* Interfaces for hardware drivers and MI audio.
*/
struct audio_softc;
/**
* audio stream format
*/
typedef struct audio_params {
u_int sample_rate; /* sample rate */
u_int encoding; /* e.g. mu-law, linear, etc */
u_int precision; /* bits/subframe */
u_int validbits; /* valid bits in a subframe */
u_int channels; /* mono(1), stereo(2) */
} audio_params_t;
/* The default audio mode: 8 kHz mono mu-law */
extern const struct audio_params audio_default;
/**
* audio stream buffer
*/
typedef struct audio_stream {
size_t bufsize; /* allocated memory */
uint8_t *start; /* start of buffer area */
uint8_t *end; /* end of valid buffer area */
uint8_t *inp; /* address to be written next */
const uint8_t *outp; /* address to be read next */
int used; /* valid data size in this stream */
audio_params_t param; /* represents this stream */
boolean_t loop;
} audio_stream_t;
static __inline int
audio_stream_get_space(const audio_stream_t *s)
{
return (s->end - s->start) - s->used;
}
static __inline int
audio_stream_get_used(const audio_stream_t *s)
{
return s->used;
}
static __inline uint8_t *
audio_stream_add_inp(audio_stream_t *s, uint8_t *v, int diff)
{
s->used += diff;
v += diff;
if (v >= s->end)
v -= s->end - s->start;
return v;
}
static __inline const uint8_t *
audio_stream_add_outp(audio_stream_t *s, const uint8_t *v, int diff)
{
s->used -= diff;
v += diff;
if (v >= s->end)
v -= s->end - s->start;
return v;
}
/**
* an interface to fill a audio stream buffer
*/
typedef struct stream_fetcher {
int (*fetch_to)(struct stream_fetcher *, audio_stream_t *, int);
} stream_fetcher_t;
/**
* audio stream filter.
* This must be an extension of stream_fetcher_t.
*/
typedef struct stream_filter {
/* public: */
stream_fetcher_t base;
void (*dtor)(struct stream_filter *);
void (*set_fetcher)(struct stream_filter *, stream_fetcher_t *);
void (*set_inputbuffer)(struct stream_filter *, audio_stream_t *);
/* private: */
stream_fetcher_t *prev;
audio_stream_t *src;
} stream_filter_t;
/**
* factory method for stream_filter_t
*/
typedef stream_filter_t *stream_filter_factory_t(struct audio_softc *,
const audio_params_t *, const audio_params_t *);
/**
* filter pipeline request
*
* filters[0] is the first filter for playing or the last filter for recording.
* The audio_params_t instance for the hardware is filters[0].param.
*/
#ifndef AUDIO_MAX_FILTERS
# define AUDIO_MAX_FILTERS 8
#endif
typedef struct stream_filter_list {
void (*append)(struct stream_filter_list *, stream_filter_factory_t,
const audio_params_t *);
void (*prepend)(struct stream_filter_list *, stream_filter_factory_t,
const audio_params_t *);
void (*set)(struct stream_filter_list *, int, stream_filter_factory_t,
const audio_params_t *);
int req_size;
struct stream_filter_req {
stream_filter_factory_t *factory;
audio_params_t param; /* from-param for recording,
to-param for playing */
} filters[AUDIO_MAX_FILTERS];
} stream_filter_list_t;
struct malloc_type;
struct audio_hw_if {
int (*open)(void *, int); /* open hardware */
void (*close)(void *); /* close hardware */
int (*drain)(void *); /* Optional: drain buffers */
/* Encoding. */
/* XXX should we have separate in/out? */
int (*query_encoding)(void *, audio_encoding_t *);
/* Set the audio encoding parameters (record and play).
* Return 0 on success, or an error code if the
* requested parameters are impossible.
* The values in the params struct may be changed (e.g. rounding
* to the nearest sample rate.)
*/
int (*set_params)(void *, int, int, audio_params_t *,
audio_params_t *, stream_filter_list_t *,
stream_filter_list_t *);
/* Hardware may have some say in the blocksize to choose */
int (*round_blocksize)(void *, int, int, const audio_params_t *);
/*
* Changing settings may require taking device out of "data mode",
* which can be quite expensive. Also, audiosetinfo() may
* change several settings in quick succession. To avoid
* having to take the device in/out of "data mode", we provide
* this function which indicates completion of settings
* adjustment.
*/
int (*commit_settings)(void *);
/* Start input/output routines. These usually control DMA. */
int (*init_output)(void *, void *, int);
int (*init_input)(void *, void *, int);
int (*start_output)(void *, void *, int,
void (*)(void *), void *);
int (*start_input)(void *, void *, int,
void (*)(void *), void *);
int (*halt_output)(void *);
int (*halt_input)(void *);
int (*speaker_ctl)(void *, int);
#define SPKR_ON 1
#define SPKR_OFF 0
int (*getdev)(void *, struct audio_device *);
int (*setfd)(void *, int);
/* Mixer (in/out ports) */
int (*set_port)(void *, mixer_ctrl_t *);
int (*get_port)(void *, mixer_ctrl_t *);
int (*query_devinfo)(void *, mixer_devinfo_t *);
/* Allocate/free memory for the ring buffer. Usually malloc/free. */
void *(*allocm)(void *, int, size_t, struct malloc_type *, int);
void (*freem)(void *, void *, struct malloc_type *);
size_t (*round_buffersize)(void *, int, size_t);
paddr_t (*mappage)(void *, void *, off_t, int);
int (*get_props)(void *); /* device properties */
int (*trigger_output)(void *, void *, void *, int,
void (*)(void *), void *, const audio_params_t *);
int (*trigger_input)(void *, void *, void *, int,
void (*)(void *), void *, const audio_params_t *);
int (*dev_ioctl)(void *, u_long, caddr_t, int, struct proc *);
};
struct audio_attach_args {
int type;
const void *hwif; /* either audio_hw_if * or midi_hw_if * */
void *hdl;
};
#define AUDIODEV_TYPE_AUDIO 0
#define AUDIODEV_TYPE_MIDI 1
#define AUDIODEV_TYPE_OPL 2
#define AUDIODEV_TYPE_MPU 3
#define AUDIODEV_TYPE_AUX 4
/* Attach the MI driver(s) to the MD driver. */
struct device *audio_attach_mi(const struct audio_hw_if *, void *,
struct device *);
int audioprint(void *, const char *);
/* Device identity flags */
#define SOUND_DEVICE 0
#define AUDIO_DEVICE 0x80
#define AUDIOCTL_DEVICE 0xc0
#define MIXER_DEVICE 0x10
#define AUDIOUNIT(x) (minor(x)&0x0f)
#define AUDIODEV(x) (minor(x)&0xf0)
#define ISDEVSOUND(x) (AUDIODEV((x)) == SOUND_DEVICE)
#define ISDEVAUDIO(x) (AUDIODEV((x)) == AUDIO_DEVICE)
#define ISDEVAUDIOCTL(x) (AUDIODEV((x)) == AUDIOCTL_DEVICE)
#define ISDEVMIXER(x) (AUDIODEV((x)) == MIXER_DEVICE)
#if !defined(__i386__) && !defined(__arm32__) && !defined(IPL_AUDIO)
#define splaudio splbio /* XXX */
#define IPL_AUDIO IPL_BIO /* XXX */
#endif
/*
* USB Audio specification defines 12 channels:
* L R C LFE Ls Rs Lc Rc S Sl Sr T
*/
#define AUDIO_MAX_CHANNELS 12
#endif /* _SYS_DEV_AUDIO_IF_H_ */