NetBSD/sys/arch/i386/isa/lpa.c

436 lines
11 KiB
C

/*
* Copyright (c) 1990 William F. Jolitz, TeleMuse
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This software is a component of "386BSD" developed by
* William F. Jolitz, TeleMuse.
* 4. Neither the name of the developer nor the name "386BSD"
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ
* AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS
* SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT.
* THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT
* NOT MAKE USE OF THIS WORK.
*
* FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED
* BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN
* REFERENCES SUCH AS THE "PORTING UNIX TO THE 386" SERIES
* (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING
* JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND
* LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE
* ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS
* OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992.
*
* THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: lpa.c,v 1.4 1993/06/05 22:58:29 cgd Exp $
*/
/*
* Device Driver for AT parallel printer port
* Written by William Jolitz 12/18/90
* Modified to run without interrupts
* 92-08-19 Wolfgang Stanglmeier <wolf@dentaro.GUN.de>
* Slight cleanup and reorganization, try to handle restarted syscalls
* 92-09-08 Andy Valencia <jtk@netcom.com>
* 93-04-08 Rodney W. Grimes <rgrimes@agora.rain.com>
* Converted to driver name lpa, shares lptreg.h with lpt.c, fixed probe
* so that it returns IO_LPTSIZE. Added dummy lpaioctl. Added my new
* probe code from lpt.c, as the one in here was crud.
*/
#include "lpa.h"
#if NLPA > 0
#include "param.h"
#include "buf.h"
#include "systm.h"
#include "ioctl.h"
#include "tty.h"
#include "proc.h"
#include "user.h"
#include "uio.h"
#include "kernel.h"
#include "malloc.h"
#include "i386/isa/isa.h"
#include "i386/isa/isa_device.h"
#include "i386/isa/lptreg.h"
/* internal used flags */
#define OPEN (0x01) /* device is open */
#define INIT (0x02) /* device in open procedure */
/* flags from minor device */
#define LPA_PRIME (0x20) /* prime printer on open */
#define LPA_ERROR (0x10) /* log error conditions */
#define LPA_FLAG(x) ((x) & 0xfc)
#define LPA_UNIT(x) ((x) & 0x03)
/* Printer Ready condition */
#define LPS_INVERT (LPS_NBSY | LPS_NACK | LPS_SEL | LPS_NERR)
#define LPS_MASK (LPS_NBSY | LPS_NACK | LPS_OUT | LPS_SEL | LPS_NERR)
#define NOT_READY() ((inb(sc->sc_stat)^LPS_INVERT)&LPS_MASK)
/* tsleep priority */
#define LPPRI ((PZERO+8) | PCATCH)
/* debug flags */
#ifndef DEBUG
#define lprintf
#else
#define lprintf if (lpaflag) printf
int lpaflag = 1;
#endif
int lpaprobe(), lpaattach();
struct isa_driver lpadriver = {lpaprobe, lpaattach, "lpa"};
/*
* copy usermode data into sysmode buffer
*/
#define BUFSIZE 1024
/*
** Waittimes
*/
#define TIMEOUT (hz*16) /* Timeout while open device */
#define LONG (hz* 1) /* Timesteps while open */
#define MAX_SPIN 255 /* max loop counter for busy wait */
struct lpa_softc {
char *sc_cp; /* current data to print */
int sc_count; /* bytes queued in sc_inbuf */
short sc_data; /* printer data port */
short sc_stat; /* printer control port */
short sc_ctrl; /* printer status port */
u_char sc_flags; /* flags (open and internal) */
u_char sc_unit; /* unit-number */
u_char sc_smax; /* current max busy loop cnt */
char /* buffer for data */
*sc_inbuf;
} lpa_sc[NLPA];
/*
* Internal routine to lpaprobe to do port tests of one byte value
*/
int
lpa_port_test(short port, u_char data, u_char mask)
{
int temp, timeout;
data = data & mask;
outb(port, data);
timeout = 100;
do
temp = inb(port) & mask;
while (temp != data && --timeout);
lprintf("Port 0x%x\tout=%x\tin=%x\n", port, data, temp);
return (temp == data);
}
/*
* New lpaprobe routine written by Rodney W. Grimes, 3/25/1993
*
* Logic:
* 1) You should be able to write to and read back the same value
* to the data port. Do an alternating zeros, alternating ones,
* walking zero, and walking one test to check for stuck bits.
*
* 2) You should be able to write to and read back the same value
* to the control port lower 5 bits, the upper 3 bits are reserved
* per the IBM PC technical reference manauls and different boards
* do different things with them. Do an alternating zeros, alternating
* ones, walking zero, and walking one test to check for stuck bits.
*
* Some printers drag the strobe line down when the are powered off
* so this bit has been masked out of the control port test.
*
* XXX Some printers may not like a fast pulse on init or strobe, I
* don't know at this point, if that becomes a problem these bits
* should be turned off in the mask byte for the control port test.
*
* 3) Set the data and control ports to a value of 0
*/
int
lpaprobe(struct isa_device *dvp)
{
int status;
short port;
u_char data;
u_char mask;
int i;
status = IO_LPTSIZE;
port = dvp->id_iobase + lpt_data;
mask = 0xff;
while (mask != 0)
{
data = 0x55; /* Alternating zeros */
if (!lpa_port_test(port, data, mask)) status = 0;
data = 0xaa; /* Alternating ones */
if (!lpa_port_test(port, data, mask)) status = 0;
for (i = 0; i < 8; i++) /* Walking zero */
{
data = ~(1 << i);
if (!lpa_port_test(port, data, mask)) status = 0;
}
for (i = 0; i < 8; i++) /* Walking one */
{
data = (1 << i);
if (!lpa_port_test(port, data, mask)) status = 0;
}
if (port == dvp->id_iobase + lpt_data)
{
port = dvp->id_iobase + lpt_control;
mask = 0x1e;
}
else
mask = 0;
}
outb(dvp->id_iobase+lpt_data, 0);
outb(dvp->id_iobase+lpt_control, 0);
return (status);
}
/*
* lpaattach()
* Install device
*/
lpaattach(isdp)
struct isa_device *isdp;
{
struct lpa_softc *sc;
sc = lpa_sc + isdp->id_unit;
sc->sc_unit = isdp->id_unit;
sc->sc_data = isdp->id_iobase + lpt_data;
sc->sc_stat = isdp->id_iobase + lpt_status;
sc->sc_ctrl = isdp->id_iobase + lpt_control;
outb(sc->sc_ctrl, LPC_NINIT);
return (1);
}
/*
* lpaopen()
* New open on device.
*
* We forbid all but first open
*/
lpaopen(dev, flag)
dev_t dev;
int flag;
{
struct lpa_softc *sc;
int delay; /* slept time in 1/hz seconds of tsleep */
int err;
u_char sta, unit;
unit= LPA_UNIT(minor(dev));
sta = LPA_FLAG(minor(dev));
/* minor number out of limits ? */
if (unit >= NLPA)
return (ENXIO);
sc = lpa_sc + unit;
/* Attached ? */
if (!sc->sc_ctrl) { /* not attached */
return(ENXIO);
}
/* Printer busy ? */
if (sc->sc_flags) { /* too late .. */
return(EBUSY);
}
/* Have memory for buffer? */
sc->sc_inbuf = malloc(BUFSIZE, M_DEVBUF, M_WAITOK);
if (sc->sc_inbuf == 0)
return(ENOMEM);
/* Init printer */
sc->sc_flags = sta | INIT;
if (sc->sc_flags & LPA_PRIME) {
outb(sc->sc_ctrl, 0);
}
/* Select printer */
outb(sc->sc_ctrl, LPC_SEL|LPC_NINIT);
/* and wait for ready .. */
for (delay=0; NOT_READY(); delay+= LONG) {
if (delay >= TIMEOUT) { /* too long waited .. */
sc->sc_flags = 0;
return (EBUSY);
}
/* sleep a moment */
if ((err = tsleep (sc, LPPRI, "lpa: open", LONG)) !=
EWOULDBLOCK) {
sc->sc_flags = 0;
return (EBUSY);
}
}
/* Printer ready .. set variables */
sc->sc_flags |= OPEN;
sc->sc_count = 0;
return(0);
}
/*
* pushbytes()
* Workhorse for actually spinning and writing bytes to printer
*/
static
pushbytes(sc)
struct lpa_softc *sc;
{
int spin, err, tic;
char ch;
/* loop for every character .. */
while (sc->sc_count > 0) {
/* printer data */
ch = *(sc->sc_cp);
sc->sc_cp += 1;
sc->sc_count -= 1;
outb(sc->sc_data, ch);
/* Busy wait for printer ready .. */
spin = tic = 0;
while (NOT_READY()) {
if (++spin >= sc->sc_smax) {
/*
* Now sleep, every cycle a
* little longer ..
*/
tic = tic + tic + 1;
err = tsleep(sc, LPPRI, "lpa: write", tic);
if (err != EWOULDBLOCK) {
return (err);
}
}
}
/* strobe */
outb(sc->sc_ctrl, LPC_NINIT|LPC_SEL|LPC_STB);
outb(sc->sc_ctrl, LPC_NINIT|LPC_SEL);
/* Adapt busy-wait length... */
if (spin >= sc->sc_smax) { /* was sleep wait */
if (sc->sc_smax<MAX_SPIN)
sc->sc_smax++;
}
if (spin*2 < sc->sc_smax) {
sc->sc_smax--;
}
}
return(0);
}
/*
* lpaclose()
* Close on lp. Try to flush data in buffer out.
*/
lpaclose(dev, flag)
dev_t dev;
int flag;
{
struct lpa_softc *sc = lpa_sc + LPA_UNIT(minor(dev));
/* If there's queued data, try to flush it */
(void)pushbytes(sc);
/* really close .. quite simple :-) */
outb(sc->sc_ctrl, LPC_NINIT);
sc->sc_flags = 0;
free(sc->sc_inbuf, M_DEVBUF);
sc->sc_inbuf = 0; /* Sanity */
return(0);
}
/*
* lpawrite()
* Copy from user's buffer, then print
*/
lpawrite(dev, uio)
dev_t dev;
struct uio *uio;
{
struct lpa_softc *sc = lpa_sc + LPA_UNIT(minor(dev));
int err;
/* Write out old bytes from interrupted syscall */
if (sc->sc_count > 0) {
err = pushbytes(sc);
if (err)
return(err);
}
/* main loop */
while ((sc->sc_count = MIN(BUFSIZE, uio->uio_resid)) > 0) {
/* get from user-space */
sc->sc_cp = sc->sc_inbuf;
uiomove(sc->sc_inbuf, sc->sc_count, uio);
err = pushbytes(sc);
if (err)
return(err);
}
return(0);
}
int
lpaioctl(dev_t dev, int cmd, caddr_t data, int flag)
{
int error;
error = 0;
switch (cmd) {
#ifdef THISISASAMPLE
case XXX:
dothis; andthis; andthat;
error=x;
break;
#endif /* THISISASAMPLE */
default:
error = ENODEV;
}
return(error);
}
#endif /* NLPA > 0 */