125 lines
5.3 KiB
C
125 lines
5.3 KiB
C
/* $NetBSD: pciide_piix_reg.h,v 1.8 2003/10/05 17:48:49 bouyer Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1998 Manuel Bouyer.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Manuel Bouyer.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Registers definitions for Intel's PIIX serie PCI IDE controllers.
|
|
* See Intel's
|
|
* "82371FB (PIIX) and 82371SB (PIIX3) PCI ISA IDE XCELERATOR"
|
|
* "82371AB PCI-TO-ISA / IDE XCELERATOR (PIIX4)" and
|
|
* "Intel 82801AA (ICH) and Intel 82801AB (ICH0) I/O Controller Hub"
|
|
* available from http://developers.intel.com/
|
|
*/
|
|
|
|
/*
|
|
* Bus master interface base address register
|
|
*/
|
|
#define PIIX_BMIBA 0x20
|
|
#define PIIX_BMIBA_ADDR(x) (x & 0x0000FFFF0)
|
|
#define PIIX_BMIBA_RTE(x) (x & 0x000000001)
|
|
#define PIIX_BMIBA_RTE_IO 0x000000001 /* base addr maps to I/O space */
|
|
|
|
/*
|
|
* IDE timing register
|
|
* 0x40/0x41 is for primary, 0x42/0x43 for secondary channel
|
|
*/
|
|
#define PIIX_IDETIM 0x40
|
|
#define PIIX_IDETIM_READ(x, channel) (((x) >> (16 * (channel))) & 0x0000FFFF)
|
|
#define PIIX_IDETIM_SET(x, bytes, channel) \
|
|
((x) | ((bytes) << (16 * (channel))))
|
|
#define PIIX_IDETIM_CLEAR(x, bytes, channel) \
|
|
((x) & ~((bytes) << (16 * (channel))))
|
|
|
|
#define PIIX_IDETIM_IDE 0x8000 /* PIIX decode IDE registers */
|
|
#define PIIX_IDETIM_SITRE 0x4000 /* slaves IDE timing registers
|
|
enabled (PIIX3/4 only) */
|
|
#define PIIX_IDETIM_ISP_MASK 0x3000 /* IOrdy sample point */
|
|
#define PIIX_IDETIM_ISP_SHIFT 12
|
|
#define PIIX_IDETIM_ISP_SET(x) ((x) << PIIX_IDETIM_ISP_SHIFT)
|
|
#define PIIX_IDETIM_RTC_MASK 0x0300 /* recovery time */
|
|
#define PIIX_IDETIM_RTC_SHIFT 8
|
|
#define PIIX_IDETIM_RTC_SET(x) ((x) << PIIX_IDETIM_RTC_SHIFT)
|
|
#define PIIX_IDETIM_DTE(d) (0x0008 << (4 * (d))) /* DMA timing only */
|
|
#define PIIX_IDETIM_PPE(d) (0x0004 << (4 * (d))) /* prefetch/posting */
|
|
#define PIIX_IDETIM_IE(d) (0x0002 << (4 * (d))) /* IORDY enable */
|
|
#define PIIX_IDETIM_TIME(d) (0x0001 << (4 * (d))) /* Fast timing enable */
|
|
/*
|
|
* Slave IDE timing register (PIIX3/4 only)
|
|
* This register must be enabled via the PIIX_IDETIM_SITRE bit
|
|
*/
|
|
#define PIIX_SIDETIM 0x44
|
|
#define PIIX_SIDETIM_ISP_MASK(channel) (0x0c << ((channel) * 4))
|
|
#define PIIX_SIDETIM_ISP_SHIFT 2
|
|
#define PIIX_SIDETIM_ISP_SET(x, channel) \
|
|
(x << (PIIX_SIDETIM_ISP_SHIFT + ((channel) * 4)))
|
|
#define PIIX_SIDETIM_RTC_MASK(channel) (0x03 << ((channel) * 4))
|
|
#define PIIX_SIDETIM_RTC_SHIFT 0
|
|
#define PIIX_SIDETIM_RTC_SET(x, channel) \
|
|
(x << (PIIX_SIDETIM_RTC_SHIFT + ((channel) * 4)))
|
|
|
|
/*
|
|
* Ultra DMA/33 register (PIIX4 only)
|
|
*/
|
|
#define PIIX_UDMAREG 0x48
|
|
/* Control register */
|
|
#define PIIX_UDMACTL_DRV_EN(channel, drive) (0x01 << ((channel) * 2 + (drive)))
|
|
/* Ultra DMA/33 timing register (PIIX4 only) */
|
|
#define PIIX_UDMATIM_SHIFT 16
|
|
#define PIIX_UDMATIM_SET(x, channel, drive) \
|
|
(((x) << ((channel * 8) + (drive * 4))) << PIIX_UDMATIM_SHIFT)
|
|
|
|
/*
|
|
* IDE config register (ICH/ICH0/ICH2 only)
|
|
*/
|
|
#define PIIX_CONFIG 0x54
|
|
#define PIIX_CONFIG_PINGPONG 0x0400
|
|
/* The following are only for the 82801AA (ICH) and 82801BA (ICH2) */
|
|
#define PIIX_CONFIG_CR(channel, drive) (0x0010 << ((channel) * 2 + (drive)))
|
|
#define PIIX_CONFIG_UDMA66(channel, drive) (0x0001 << ((channel) * 2 + (drive)))
|
|
/* The following are only for the 82801BA (ICH2) */
|
|
#define PIIX_CONFIG_UDMA100(channel, drive) (0x1000 << ((channel) * 2 + (drive)))
|
|
|
|
/*
|
|
* these tables define the differents values to upload to the
|
|
* ISP and RTC registers for the various PIO and DMA mode
|
|
* (from the PIIX4 doc).
|
|
*/
|
|
static const int8_t piix_isp_pio[] __attribute__((__unused__)) =
|
|
{0x00, 0x00, 0x01, 0x02, 0x02};
|
|
static const int8_t piix_rtc_pio[] __attribute__((__unused__)) =
|
|
{0x00, 0x00, 0x00, 0x01, 0x03};
|
|
static const int8_t piix_isp_dma[] __attribute__((__unused__)) =
|
|
{0x00, 0x02, 0x02};
|
|
static const int8_t piix_rtc_dma[] __attribute__((__unused__)) =
|
|
{0x00, 0x02, 0x03};
|
|
static const int8_t piix4_sct_udma[] __attribute__((__unused__)) =
|
|
{0x00, 0x01, 0x02, 0x01, 0x02, 0x01};
|