NetBSD/share/man/man4/pms.4

195 lines
7.2 KiB
Groff

.\" $NetBSD: pms.4,v 1.24 2008/12/14 13:51:33 wiz Exp $
.\"
.\" Copyright (c) 1993 Christopher G. Demetriou
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed for the
.\" NetBSD Project. See http://www.NetBSD.org/ for
.\" information about NetBSD.
.\" 4. The name of the author may not be used to endorse or promote products
.\" derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" <<Id: LICENSE,v 1.2 2000/06/14 15:57:33 cgd Exp>>
.\"
.Dd December 13, 2008
.Dt PMS 4
.Os
.Sh NAME
.Nm pms
.Nd PS/2 auxiliary port mouse driver
.Sh SYNOPSIS
.Cd pckbc* at isa?
.Cd pms* at pckbc?
.Cd wsmouse* at pms?
.Pp
.Cd options PMS_DISABLE_POWERHOOK
.Cd options PMS_SYNAPTICS_TOUCHPAD
.Cd options PMS_ELANTECH_TOUCHPAD
.Sh DESCRIPTION
The
.Nm
driver provides an interface to PS/2 auxiliary port mice within the
.Xr wscons 4
framework.
Parent device in terms of the autoconfiguration framework is
.Xr pckbc 4 ,
the PC keyboard controller.
.Dq pms
is a generic driver which supports mice using common variants of the PS/2
protocol, including wheel mice of the
.Dq IntelliMouse
breed.
Wheel movements are mapped to a third (z-) axis.
The driver is
believed to work with both 3-button and 5-button mice with scroll wheels.
Mice which use other protocol extensions are not currently supported, but
might be if protocol documentation could be found.
Mouse related data are accessed by
.Xr wsmouse 4
devices.
.Pp
The
.Nm
driver has been updated to attempt to renegotiate mouse protocol after seeing
suspicious or defective mouse protocol packets, or unusual delays in the
middle of a packet; this should improve the chances that a mouse will recover
after being switched away or reset (for instance, by a console switch).
.Pp
The
.Va PMS_DISABLE_POWERHOOK
kernel option disables PS/2 reset on resume.
.Pp
In addition, the
.Nm
driver supports the
.Dq Synaptics
and
.Dq Elantech
touchpads in native mode, enabled with the
.Va PMS_SYNAPTICS_TOUCHPAD
and
.Va PMS_ELANTECH_TOUCHPAD
kernel options.
This allows the driver to take advantage of extra
features available on Synaptics and Elantech Touchpads.
The following
.Xr sysctl 8
variables control behavior of Synaptics touchpads:
.Bl -tag
.It Dv hw.synaptics.up_down_emulation
If the touchpad reports the existence of Up/Down buttons, this value
determines if they should be reported as button 4 and 5 events or if
they should be used to emulate some other event.
When set to 0, report Up/Down events as buttons 4 and 5.
When set to 1, the Up and Down buttons are both mapped to the middle button.
When set to 2 (default), the Up and Down buttons are used for Z-axis
emulation, which more closely resembles how mouse wheels operate.
.It Dv hw.synaptics.up_down_motion_delta
When the Up/Down buttons are used for Z-axis emulation, this value specifies
the emulated delta-Z value per click.
.It Dv hw.synaptics.gesture_move
Gestures will not be recognised if the finger moves by more than this
amount between taps.
.It Dv hw.synaptics.gesture_length
Gestures will not be recognised if the number of packets (at 80 packets
per second) between taps exceeds this value.
.It Dv hw.synaptics.edge_left
.It Dv hw.synaptics.edge_right
.It Dv hw.synaptics.edge_top
.It Dv hw.synaptics.edge_bottom
These values define a border around the touchpad which will be used for
edge motion emulation during a drag gesture.
If a drag gesture is in progress and the finger moves into this border,
the driver will behave as if the finger continues to move in the same
direction beyond the edge of the touchpad.
.It Dv hw.synaptics.edge_motion_delta
This specifies the pointer speed when edge motion is in effect.
.It Dv hw.synaptics.finger_high
The driver will ignore new finger events until the reported pressure exceeds
this value.
.It Dv hw.synaptics.finger_low
The driver will assume a finger remains on the touchpad until the
reported pressure drops below this value.
.It Dv hw.synaptics.two_fingers_emulation
More recent touchpads can report the presence of more than one finger
on the pad.
This value determines how such events are used.
If set to 0 (default), two-finger events are ignored.
If set to 1, two-finger events generate a right button click.
If set to 2, two-finger events generate a middle button click.
.It Dv hw.synaptics.scale_x
.It Dv hw.synaptics.scale_y
Scale factor used to divide movement deltas derived from Synaptics
coordinates (0-6143) to yield more reasonable values (default 16).
.It Dv hw.synaptics.max_speed_x
.It Dv hw.synaptics.max_speed_y
Limits pointer rate of change (after scaling) per reported movement
event (default 32).
.It Dv hw.synaptics.movement_threshold
Movements of less than this value (in Synaptics coordinates) are
ignored (default 4).
.El
.Pp
The following
.Xr sysctl 8
variables control behavior of Elantech touchpads:
.Bl -tag
.It Dv hw.elantech.xy_precision_shift
.It Dv hw.elantech.z_precision_shift
Increased values improve the accuracy of X, Y, and Z-axis reporting
at the expense of slower mouse movement (default 2 for xy,
and 3 for z).
.El
.Pp
For Elantech touchpads, the Z-axis is emulated using two-finger
Y-axis reporting.
.Sh SEE ALSO
.Xr pckbc 4 ,
.Xr ums 4 ,
.Xr wsmouse 4
.Sh AUTHORS
The
.Nm
driver was originally written by Christopher G. Demetriou.
The changes to merge the
.Dq IntelliMouse
protocol in, and reset the mouse in the event of protocol problems, were
contributed by Peter Seebach.
Special thanks to Ray Trent, at Synaptics, who contributed valuable
insight into how to identify bogus mouse data.
The changes to add
.Dq Synaptics
pad support were by Ales Krenek, Kentaro A. Kurahone, and Steve C. Woodford.
The changes to add
.Dq Elantech
pad support were by Jared D. McNeill.
.Sh BUGS
It is possible for the driver to mistakenly negotiate the non-scroll-wheel
protocol, after which it is unlikely to recover until the device is closed
and reopened.
.Pp
The
.Dq Elantech
pad code only supports trackpads with firmware version 2.48 or above.