3643d6b4fe
and into in6_if_link_up. This fixes a possible panic where link is up but not the interface. Note that a better solution would be to listen to the routing socket in the kernel, but I don't know how to do that. Reachable Router tests for IFF_UP as well.
711 lines
17 KiB
C
711 lines
17 KiB
C
/* $NetBSD: mii_physubr.c,v 1.80 2013/06/20 13:56:29 roy Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
* NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Subroutines common to all PHYs.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: mii_physubr.c,v 1.80 2013/06/20 13:56:29 roy Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/device.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/module.h>
|
|
#include <sys/proc.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_media.h>
|
|
#include <net/route.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
const char *(*mii_get_descr)(int, int) = mii_get_descr_stub;
|
|
|
|
int mii_verbose_loaded = 0;
|
|
|
|
const char *mii_get_descr_stub(int oui, int model)
|
|
{
|
|
mii_load_verbose();
|
|
if (mii_verbose_loaded)
|
|
return mii_get_descr(oui, model);
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Routine to load the miiverbose kernel module as needed
|
|
*/
|
|
void mii_load_verbose(void)
|
|
{
|
|
if (mii_verbose_loaded == 0)
|
|
module_autoload("miiverbose", MODULE_CLASS_MISC);
|
|
}
|
|
|
|
static void mii_phy_statusmsg(struct mii_softc *);
|
|
|
|
/*
|
|
* Media to register setting conversion table. Order matters.
|
|
*/
|
|
static const struct mii_media mii_media_table[MII_NMEDIA] = {
|
|
/* None */
|
|
{ BMCR_ISO, ANAR_CSMA,
|
|
0, },
|
|
|
|
/* 10baseT */
|
|
{ BMCR_S10, ANAR_CSMA|ANAR_10,
|
|
0, },
|
|
|
|
/* 10baseT-FDX */
|
|
{ BMCR_S10|BMCR_FDX, ANAR_CSMA|ANAR_10_FD,
|
|
0, },
|
|
|
|
/* 100baseT4 */
|
|
{ BMCR_S100, ANAR_CSMA|ANAR_T4,
|
|
0, },
|
|
|
|
/* 100baseTX */
|
|
{ BMCR_S100, ANAR_CSMA|ANAR_TX,
|
|
0, },
|
|
|
|
/* 100baseTX-FDX */
|
|
{ BMCR_S100|BMCR_FDX, ANAR_CSMA|ANAR_TX_FD,
|
|
0, },
|
|
|
|
/* 1000baseX */
|
|
{ BMCR_S1000, ANAR_CSMA,
|
|
0, },
|
|
|
|
/* 1000baseX-FDX */
|
|
{ BMCR_S1000|BMCR_FDX, ANAR_CSMA,
|
|
0, },
|
|
|
|
/* 1000baseT */
|
|
{ BMCR_S1000, ANAR_CSMA,
|
|
GTCR_ADV_1000THDX },
|
|
|
|
/* 1000baseT-FDX */
|
|
{ BMCR_S1000, ANAR_CSMA,
|
|
GTCR_ADV_1000TFDX },
|
|
};
|
|
|
|
static void mii_phy_auto_timeout(void *);
|
|
|
|
void
|
|
mii_phy_setmedia(struct mii_softc *sc)
|
|
{
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
int bmcr, anar, gtcr;
|
|
|
|
if (IFM_SUBTYPE(ife->ifm_media) == IFM_AUTO) {
|
|
/*
|
|
* Force renegotiation if MIIF_DOPAUSE.
|
|
*
|
|
* XXX This is only necessary because many NICs don't
|
|
* XXX advertise PAUSE capabilities at boot time. Maybe
|
|
* XXX we should force this only once?
|
|
*/
|
|
if ((PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN) == 0 ||
|
|
(sc->mii_flags & (MIIF_FORCEANEG|MIIF_DOPAUSE)))
|
|
(void) mii_phy_auto(sc, 1);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Table index is stored in the media entry.
|
|
*/
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (/* ife->ifm_data < 0 || */ ife->ifm_data >= MII_NMEDIA)
|
|
panic("mii_phy_setmedia");
|
|
#endif
|
|
|
|
anar = mii_media_table[ife->ifm_data].mm_anar;
|
|
bmcr = mii_media_table[ife->ifm_data].mm_bmcr;
|
|
gtcr = mii_media_table[ife->ifm_data].mm_gtcr;
|
|
|
|
if (mii->mii_media.ifm_media & IFM_ETH_MASTER) {
|
|
switch (IFM_SUBTYPE(ife->ifm_media)) {
|
|
case IFM_1000_T:
|
|
gtcr |= GTCR_MAN_MS|GTCR_ADV_MS;
|
|
break;
|
|
|
|
default:
|
|
panic("mii_phy_setmedia: MASTER on wrong media");
|
|
}
|
|
}
|
|
|
|
if (mii->mii_media.ifm_media & IFM_FLOW) {
|
|
if (sc->mii_flags & MIIF_IS_1000X)
|
|
anar |= ANAR_X_PAUSE_SYM | ANAR_X_PAUSE_ASYM;
|
|
else {
|
|
anar |= ANAR_FC;
|
|
/* XXX Only 1000BASE-T has PAUSE_ASYM? */
|
|
if ((sc->mii_flags & MIIF_HAVE_GTCR) &&
|
|
(sc->mii_extcapabilities &
|
|
(EXTSR_1000THDX | EXTSR_1000TFDX)))
|
|
anar |= ANAR_PAUSE_ASYM;
|
|
}
|
|
}
|
|
|
|
if (ife->ifm_media & IFM_LOOP)
|
|
bmcr |= BMCR_LOOP;
|
|
|
|
PHY_WRITE(sc, MII_ANAR, anar);
|
|
if (sc->mii_flags & MIIF_HAVE_GTCR)
|
|
PHY_WRITE(sc, MII_100T2CR, gtcr);
|
|
if (IFM_SUBTYPE(ife->ifm_media) == IFM_1000_T) {
|
|
mii_phy_auto(sc, 0);
|
|
} else {
|
|
PHY_WRITE(sc, MII_BMCR, bmcr);
|
|
}
|
|
}
|
|
|
|
int
|
|
mii_phy_auto(struct mii_softc *sc, int waitfor)
|
|
{
|
|
int i;
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
|
|
sc->mii_ticks = 0;
|
|
if ((sc->mii_flags & MIIF_DOINGAUTO) == 0) {
|
|
/*
|
|
* Check for 1000BASE-X. Autonegotiation is a bit
|
|
* different on such devices.
|
|
*/
|
|
if (sc->mii_flags & MIIF_IS_1000X) {
|
|
uint16_t anar = 0;
|
|
|
|
if (sc->mii_extcapabilities & EXTSR_1000XFDX)
|
|
anar |= ANAR_X_FD;
|
|
if (sc->mii_extcapabilities & EXTSR_1000XHDX)
|
|
anar |= ANAR_X_HD;
|
|
|
|
if (sc->mii_flags & MIIF_DOPAUSE) {
|
|
/* XXX Asymmetric vs. symmetric? */
|
|
anar |= ANLPAR_X_PAUSE_TOWARDS;
|
|
}
|
|
|
|
PHY_WRITE(sc, MII_ANAR, anar);
|
|
} else {
|
|
uint16_t anar;
|
|
|
|
anar = BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) |
|
|
ANAR_CSMA;
|
|
if (sc->mii_flags & MIIF_DOPAUSE) {
|
|
anar |= ANAR_FC;
|
|
/* XXX Only 1000BASE-T has PAUSE_ASYM? */
|
|
if ((sc->mii_flags & MIIF_HAVE_GTCR) &&
|
|
(sc->mii_extcapabilities &
|
|
(EXTSR_1000THDX | EXTSR_1000TFDX)))
|
|
anar |= ANAR_PAUSE_ASYM;
|
|
}
|
|
|
|
/*
|
|
*for 1000-base-T, autonegotiation mus be enabled, but
|
|
*if we're not set to auto, only advertise
|
|
*1000-base-T with the link partner.
|
|
*/
|
|
if (IFM_SUBTYPE(ife->ifm_media) == IFM_1000_T) {
|
|
anar &= ~(ANAR_T4|ANAR_TX_FD|ANAR_TX|ANAR_10_FD|ANAR_10);
|
|
}
|
|
|
|
PHY_WRITE(sc, MII_ANAR, anar);
|
|
if (sc->mii_flags & MIIF_HAVE_GTCR) {
|
|
uint16_t gtcr = 0;
|
|
|
|
if (sc->mii_extcapabilities & EXTSR_1000TFDX)
|
|
gtcr |= GTCR_ADV_1000TFDX;
|
|
if (sc->mii_extcapabilities & EXTSR_1000THDX)
|
|
gtcr |= GTCR_ADV_1000THDX;
|
|
|
|
PHY_WRITE(sc, MII_100T2CR, gtcr);
|
|
}
|
|
}
|
|
PHY_WRITE(sc, MII_BMCR, BMCR_AUTOEN | BMCR_STARTNEG);
|
|
}
|
|
|
|
if (waitfor) {
|
|
/* Wait 500ms for it to complete. */
|
|
for (i = 0; i < 500; i++) {
|
|
if (PHY_READ(sc, MII_BMSR) & BMSR_ACOMP)
|
|
return (0);
|
|
delay(1000);
|
|
}
|
|
|
|
/*
|
|
* Don't need to worry about clearing MIIF_DOINGAUTO.
|
|
* If that's set, a timeout is pending, and it will
|
|
* clear the flag.
|
|
*/
|
|
return (EIO);
|
|
}
|
|
|
|
/*
|
|
* Just let it finish asynchronously. This is for the benefit of
|
|
* the tick handler driving autonegotiation. Don't want 500ms
|
|
* delays all the time while the system is running!
|
|
*/
|
|
if (sc->mii_flags & MIIF_AUTOTSLEEP) {
|
|
sc->mii_flags |= MIIF_DOINGAUTO;
|
|
tsleep(&sc->mii_flags, PZERO, "miiaut", hz >> 1);
|
|
mii_phy_auto_timeout(sc);
|
|
} else if ((sc->mii_flags & MIIF_DOINGAUTO) == 0) {
|
|
sc->mii_flags |= MIIF_DOINGAUTO;
|
|
callout_reset(&sc->mii_nway_ch, hz >> 1,
|
|
mii_phy_auto_timeout, sc);
|
|
}
|
|
return (EJUSTRETURN);
|
|
}
|
|
|
|
static void
|
|
mii_phy_auto_timeout(void *arg)
|
|
{
|
|
struct mii_softc *sc = arg;
|
|
int s;
|
|
|
|
if (!device_is_active(sc->mii_dev))
|
|
return;
|
|
|
|
s = splnet();
|
|
sc->mii_flags &= ~MIIF_DOINGAUTO;
|
|
|
|
/* Update the media status. */
|
|
(void) PHY_SERVICE(sc, sc->mii_pdata, MII_POLLSTAT);
|
|
splx(s);
|
|
}
|
|
|
|
int
|
|
mii_phy_tick(struct mii_softc *sc)
|
|
{
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
int reg;
|
|
|
|
/* Just bail now if the interface is down. */
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
return (EJUSTRETURN);
|
|
|
|
/*
|
|
* If we're not doing autonegotiation, we don't need to do
|
|
* any extra work here. However, we need to check the link
|
|
* status so we can generate an announcement by returning
|
|
* with 0 if the status changes.
|
|
*/
|
|
if ((IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) &&
|
|
(IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T)) {
|
|
/*
|
|
* Reset autonegotiation timer to 0 just to make sure
|
|
* the future autonegotiation start with 0.
|
|
*/
|
|
sc->mii_ticks = 0;
|
|
return (0);
|
|
}
|
|
|
|
/* Read the status register twice; BMSR_LINK is latch-low. */
|
|
reg = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
|
|
if (reg & BMSR_LINK) {
|
|
/*
|
|
* Reset autonegotiation timer to 0 in case the link
|
|
* goes down in the next tick.
|
|
*/
|
|
sc->mii_ticks = 0;
|
|
/* See above. */
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* mii_ticks == 0 means it's the first tick after changing the media or
|
|
* the link became down since the last tick (see above), so return with
|
|
* 0 to update the status.
|
|
*/
|
|
if (sc->mii_ticks++ == 0)
|
|
return (0);
|
|
|
|
/*
|
|
* Only retry autonegotiation every N seconds.
|
|
*/
|
|
KASSERT(sc->mii_anegticks != 0);
|
|
if (sc->mii_ticks <= sc->mii_anegticks)
|
|
return (EJUSTRETURN);
|
|
|
|
PHY_RESET(sc);
|
|
|
|
if (mii_phy_auto(sc, 0) == EJUSTRETURN)
|
|
return (EJUSTRETURN);
|
|
|
|
/*
|
|
* Might need to generate a status message if autonegotiation
|
|
* failed.
|
|
*/
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
mii_phy_reset(struct mii_softc *sc)
|
|
{
|
|
int reg, i;
|
|
|
|
if (sc->mii_flags & MIIF_NOISOLATE)
|
|
reg = BMCR_RESET;
|
|
else
|
|
reg = BMCR_RESET | BMCR_ISO;
|
|
PHY_WRITE(sc, MII_BMCR, reg);
|
|
|
|
/* Wait another 100ms for it to complete. */
|
|
for (i = 0; i < 100; i++) {
|
|
reg = PHY_READ(sc, MII_BMCR);
|
|
if ((reg & BMCR_RESET) == 0)
|
|
break;
|
|
delay(1000);
|
|
}
|
|
|
|
if (sc->mii_inst != 0 && ((sc->mii_flags & MIIF_NOISOLATE) == 0))
|
|
PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
|
|
}
|
|
|
|
void
|
|
mii_phy_down(struct mii_softc *sc)
|
|
{
|
|
|
|
if (sc->mii_flags & MIIF_DOINGAUTO) {
|
|
sc->mii_flags &= ~MIIF_DOINGAUTO;
|
|
callout_stop(&sc->mii_nway_ch);
|
|
}
|
|
}
|
|
|
|
void
|
|
mii_phy_status(struct mii_softc *sc)
|
|
{
|
|
|
|
PHY_STATUS(sc);
|
|
}
|
|
|
|
void
|
|
mii_phy_update(struct mii_softc *sc, int cmd)
|
|
{
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
|
|
if (sc->mii_media_active != mii->mii_media_active ||
|
|
sc->mii_media_status != mii->mii_media_status ||
|
|
cmd == MII_MEDIACHG) {
|
|
mii_phy_statusmsg(sc);
|
|
(*mii->mii_statchg)(mii->mii_ifp);
|
|
sc->mii_media_active = mii->mii_media_active;
|
|
sc->mii_media_status = mii->mii_media_status;
|
|
}
|
|
}
|
|
|
|
static void
|
|
mii_phy_statusmsg(struct mii_softc *sc)
|
|
{
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
struct ifnet *ifp = mii->mii_ifp;
|
|
|
|
if (mii->mii_media_status & IFM_AVALID) {
|
|
if (mii->mii_media_status & IFM_ACTIVE)
|
|
if_link_state_change(ifp, LINK_STATE_UP);
|
|
else
|
|
if_link_state_change(ifp, LINK_STATE_DOWN);
|
|
} else
|
|
if_link_state_change(ifp, LINK_STATE_UNKNOWN);
|
|
|
|
ifp->if_baudrate = ifmedia_baudrate(mii->mii_media_active);
|
|
}
|
|
|
|
/*
|
|
* Initialize generic PHY media based on BMSR, called when a PHY is
|
|
* attached. We expect to be set up to print a comma-separated list
|
|
* of media names. Does not print a newline.
|
|
*/
|
|
void
|
|
mii_phy_add_media(struct mii_softc *sc)
|
|
{
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
device_t self = sc->mii_dev;
|
|
const char *sep = "";
|
|
int fdx = 0;
|
|
|
|
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
|
|
#define PRINT(n) aprint_normal("%s%s", sep, (n)); sep = ", "
|
|
|
|
if ((sc->mii_flags & MIIF_NOISOLATE) == 0)
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
|
|
MII_MEDIA_NONE);
|
|
|
|
/*
|
|
* There are different interpretations for the bits in
|
|
* HomePNA PHYs. And there is really only one media type
|
|
* that is supported.
|
|
*/
|
|
if (sc->mii_flags & MIIF_IS_HPNA) {
|
|
if (sc->mii_capabilities & BMSR_10THDX) {
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_HPNA_1, 0,
|
|
sc->mii_inst),
|
|
MII_MEDIA_10_T);
|
|
PRINT("HomePNA1");
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
if (sc->mii_capabilities & BMSR_10THDX) {
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, sc->mii_inst),
|
|
MII_MEDIA_10_T);
|
|
PRINT("10baseT");
|
|
}
|
|
if (sc->mii_capabilities & BMSR_10TFDX) {
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, sc->mii_inst),
|
|
MII_MEDIA_10_T_FDX);
|
|
PRINT("10baseT-FDX");
|
|
fdx = 1;
|
|
}
|
|
if (sc->mii_capabilities & BMSR_100TXHDX) {
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, sc->mii_inst),
|
|
MII_MEDIA_100_TX);
|
|
PRINT("100baseTX");
|
|
}
|
|
if (sc->mii_capabilities & BMSR_100TXFDX) {
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, sc->mii_inst),
|
|
MII_MEDIA_100_TX_FDX);
|
|
PRINT("100baseTX-FDX");
|
|
fdx = 1;
|
|
}
|
|
if (sc->mii_capabilities & BMSR_100T4) {
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_T4, 0, sc->mii_inst),
|
|
MII_MEDIA_100_T4);
|
|
PRINT("100baseT4");
|
|
}
|
|
|
|
if (sc->mii_extcapabilities & EXTSR_MEDIAMASK) {
|
|
/*
|
|
* XXX Right now only handle 1000SX and 1000TX. Need
|
|
* XXX to handle 1000LX and 1000CX some how.
|
|
*
|
|
* Note since it can take 5 seconds to auto-negotiate
|
|
* a gigabit link, we make anegticks 10 seconds for
|
|
* all the gigabit media types.
|
|
*/
|
|
if (sc->mii_extcapabilities & EXTSR_1000XHDX) {
|
|
sc->mii_anegticks = MII_ANEGTICKS_GIGE;
|
|
sc->mii_flags |= MIIF_IS_1000X;
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_SX, 0,
|
|
sc->mii_inst), MII_MEDIA_1000_X);
|
|
PRINT("1000baseSX");
|
|
}
|
|
if (sc->mii_extcapabilities & EXTSR_1000XFDX) {
|
|
sc->mii_anegticks = MII_ANEGTICKS_GIGE;
|
|
sc->mii_flags |= MIIF_IS_1000X;
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_SX, IFM_FDX,
|
|
sc->mii_inst), MII_MEDIA_1000_X_FDX);
|
|
PRINT("1000baseSX-FDX");
|
|
fdx = 1;
|
|
}
|
|
|
|
/*
|
|
* 1000baseT media needs to be able to manipulate
|
|
* master/slave mode. We set IFM_ETH_MASTER in
|
|
* the "don't care mask" and filter it out when
|
|
* the media is set.
|
|
*
|
|
* All 1000baseT PHYs have a 1000baseT control register.
|
|
*/
|
|
if (sc->mii_extcapabilities & EXTSR_1000THDX) {
|
|
sc->mii_anegticks = MII_ANEGTICKS_GIGE;
|
|
sc->mii_flags |= MIIF_HAVE_GTCR;
|
|
mii->mii_media.ifm_mask |= IFM_ETH_MASTER;
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, 0,
|
|
sc->mii_inst), MII_MEDIA_1000_T);
|
|
PRINT("1000baseT");
|
|
}
|
|
if (sc->mii_extcapabilities & EXTSR_1000TFDX) {
|
|
sc->mii_anegticks = MII_ANEGTICKS_GIGE;
|
|
sc->mii_flags |= MIIF_HAVE_GTCR;
|
|
mii->mii_media.ifm_mask |= IFM_ETH_MASTER;
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_T, IFM_FDX,
|
|
sc->mii_inst), MII_MEDIA_1000_T_FDX);
|
|
PRINT("1000baseT-FDX");
|
|
fdx = 1;
|
|
}
|
|
}
|
|
|
|
if (sc->mii_capabilities & BMSR_ANEG) {
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst),
|
|
MII_NMEDIA); /* intentionally invalid index */
|
|
PRINT("auto");
|
|
}
|
|
#undef ADD
|
|
#undef PRINT
|
|
if (fdx != 0 && (sc->mii_flags & MIIF_DOPAUSE))
|
|
mii->mii_media.ifm_mask |= IFM_ETH_FMASK;
|
|
out:
|
|
if (!pmf_device_register(self, NULL, mii_phy_resume)) {
|
|
aprint_normal("\n");
|
|
aprint_error_dev(self, "couldn't establish power handler");
|
|
}
|
|
}
|
|
|
|
void
|
|
mii_phy_delete_media(struct mii_softc *sc)
|
|
{
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
|
|
ifmedia_delete_instance(&mii->mii_media, sc->mii_inst);
|
|
}
|
|
|
|
int
|
|
mii_phy_activate(device_t self, enum devact act)
|
|
{
|
|
switch (act) {
|
|
case DVACT_DEACTIVATE:
|
|
/* XXX Invalidate parent's media setting? */
|
|
return 0;
|
|
default:
|
|
return EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
/* ARGSUSED1 */
|
|
int
|
|
mii_phy_detach(device_t self, int flags)
|
|
{
|
|
struct mii_softc *sc = device_private(self);
|
|
|
|
/* XXX Invalidate parent's media setting? */
|
|
|
|
if (sc->mii_flags & MIIF_DOINGAUTO)
|
|
callout_halt(&sc->mii_nway_ch, NULL);
|
|
|
|
callout_destroy(&sc->mii_nway_ch);
|
|
|
|
mii_phy_delete_media(sc);
|
|
LIST_REMOVE(sc, mii_list);
|
|
|
|
return (0);
|
|
}
|
|
|
|
const struct mii_phydesc *
|
|
mii_phy_match(const struct mii_attach_args *ma, const struct mii_phydesc *mpd)
|
|
{
|
|
|
|
for (; mpd->mpd_name != NULL; mpd++) {
|
|
if (MII_OUI(ma->mii_id1, ma->mii_id2) == mpd->mpd_oui &&
|
|
MII_MODEL(ma->mii_id2) == mpd->mpd_model)
|
|
return (mpd);
|
|
}
|
|
return (NULL);
|
|
}
|
|
|
|
/*
|
|
* Return the flow control status flag from MII_ANAR & MII_ANLPAR.
|
|
*/
|
|
u_int
|
|
mii_phy_flowstatus(struct mii_softc *sc)
|
|
{
|
|
u_int anar, anlpar;
|
|
|
|
if ((sc->mii_flags & MIIF_DOPAUSE) == 0)
|
|
return (0);
|
|
|
|
anar = PHY_READ(sc, MII_ANAR);
|
|
anlpar = PHY_READ(sc, MII_ANLPAR);
|
|
|
|
/* For 1000baseX, the bits are in a different location. */
|
|
if (sc->mii_flags & MIIF_IS_1000X) {
|
|
anar <<= 3;
|
|
anlpar <<= 3;
|
|
}
|
|
|
|
if ((anar & ANAR_PAUSE_SYM) & (anlpar & ANLPAR_PAUSE_SYM))
|
|
return (IFM_FLOW|IFM_ETH_TXPAUSE|IFM_ETH_RXPAUSE);
|
|
|
|
if ((anar & ANAR_PAUSE_SYM) == 0) {
|
|
if ((anar & ANAR_PAUSE_ASYM) &&
|
|
((anlpar & ANLPAR_PAUSE_TOWARDS) == ANLPAR_PAUSE_TOWARDS))
|
|
return (IFM_FLOW|IFM_ETH_TXPAUSE);
|
|
else
|
|
return (0);
|
|
}
|
|
|
|
if ((anar & ANAR_PAUSE_ASYM) == 0) {
|
|
if (anlpar & ANLPAR_PAUSE_SYM)
|
|
return (IFM_FLOW|IFM_ETH_TXPAUSE|IFM_ETH_RXPAUSE);
|
|
else
|
|
return (0);
|
|
}
|
|
|
|
switch ((anlpar & ANLPAR_PAUSE_TOWARDS)) {
|
|
case ANLPAR_PAUSE_NONE:
|
|
return (0);
|
|
|
|
case ANLPAR_PAUSE_ASYM:
|
|
return (IFM_FLOW|IFM_ETH_RXPAUSE);
|
|
|
|
default:
|
|
return (IFM_FLOW|IFM_ETH_RXPAUSE|IFM_ETH_TXPAUSE);
|
|
}
|
|
/* NOTREACHED */
|
|
}
|
|
|
|
bool
|
|
mii_phy_resume(device_t dv, const pmf_qual_t *qual)
|
|
{
|
|
struct mii_softc *sc = device_private(dv);
|
|
|
|
PHY_RESET(sc);
|
|
return PHY_SERVICE(sc, sc->mii_pdata, MII_MEDIACHG) == 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Given an ifmedia word, return the corresponding ANAR value.
|
|
*/
|
|
int
|
|
mii_anar(int media)
|
|
{
|
|
int rv;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (/* media < 0 || */ media >= MII_NMEDIA)
|
|
panic("mii_anar");
|
|
#endif
|
|
|
|
rv = mii_media_table[media].mm_anar;
|
|
|
|
return rv;
|
|
}
|