NetBSD/sbin/fsck_ffs/fsck_ffs.8

330 lines
9.1 KiB
Groff

.\" $NetBSD: fsck_ffs.8,v 1.40 2005/01/19 16:41:04 wiz Exp $
.\"
.\" Copyright (c) 1980, 1989, 1991, 1993
.\" The Regents of the University of California. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" @(#)fsck.8 8.3 (Berkeley) 11/29/94
.\"
.Dd January 13, 2004
.Dt FSCK_FFS 8
.Os
.Sh NAME
.Nm fsck_ffs
.Nd Fast File System consistency check and interactive repair
.Sh SYNOPSIS
.Nm
.Op Fl adFfPpq
.Op Fl B Ar byteorder
.Op Fl b Ar block
.Op Fl c Ar level
.Op Fl m Ar mode
.Op Fl y | n
.Ar filesystem ...
.Sh DESCRIPTION
.Nm
performs interactive file system consistency checks and repair for each of
the file systems specified on the command line.
It is normally invoked from
.Xr fsck 8 .
.Pp
The kernel takes care that only a restricted class of innocuous file system
inconsistencies can happen unless hardware or software failures intervene.
These are limited to the following:
.Pp
.Bl -item -compact -offset indent
.It
Unreferenced inodes
.It
Link counts in inodes too large
.It
Missing blocks in the free map
.It
Blocks in the free map also in files
.It
Counts in the super-block wrong
.El
.Pp
These are the only inconsistencies that
.Nm
in
.Dq preen
mode (with the
.Fl p
option) will correct; if it encounters other inconsistencies, it exits
with an abnormal return status.
For each corrected inconsistency one or more lines will be printed
identifying the file system on which the correction will take place,
and the nature of the correction.
After successfully correcting a file system,
.Nm
will print the number of files on that file system,
the number of used and free blocks,
and the percentage of fragmentation.
.Pp
If sent a
.Dv QUIT
signal,
.Nm
will finish the file system checks, then exit with an abnormal return status.
.Pp
If
.Nm
receives a
.Dv SIGINFO
signal
(see the
.Sy status
argument for
.Xr stty 1 ) ,
a line will be written to the standard error output indicating
the name of the device currently being checked, the current phase
number and phase-specific progress information.
.Pp
Without the
.Fl p
option,
.Nm
audits and interactively repairs inconsistent conditions for file systems.
If the file system is inconsistent the operator is prompted for concurrence
before each correction is attempted.
It should be noted that some of the corrective actions which are not
correctable under the
.Fl p
option will result in some loss of data.
The amount and severity of data lost may be determined from the diagnostic
output.
The default action for each consistency correction
is to wait for the operator to respond
.Li yes
or
.Li no .
If the operator does not have write permission on the file system
.Nm
will default to a
.Fl n
action.
.Pp
.Nm
has more consistency checks than
its predecessors
.Em check , dcheck , fcheck ,
and
.Em icheck
combined.
.Pp
The following flags are interpreted by
.Nm .
.Bl -tag -width XBXbyteorderXX -offset indent
.It Fl a
Interpret the filesystem as an Apple UFS filesystem, even if
there is no Apple UFS volume label present.
.It Fl B Ar byteorder
Convert the file system metadata to
.Ar byteorder
byte order if needed.
Valid byte orders are
.Dq be
and
.Dq le .
If
.Nm
is interrupted while swapping the metadata byte order, the file system cannot
be recovered.
.Nm
will print a message in interactive mode if the file system is not in host
byte order.
.It Fl b Ar block
Use the block number
.Ar block
as the super block for the file system.
Block 32 is usually an alternative super block.
.It Fl c Ar level
Convert the file system to the level
.Ar level .
Note that the level of a file system can only be raised.
There are currently five levels defined:
.Bl -tag -width 3n -offset indent
.It 0
The file system is in the old (static table) format.
.It 1
The file system is in the new (dynamic table) format.
.It 2
The file system supports 32-bit UIDs and GIDs,
short symbolic links are stored in the inode,
and directories have an added field showing the file type.
.It 3
If maxcontig is greater than one,
build the free segment maps to aid in finding contiguous sets of blocks.
If maxcontig is equal to one, delete any existing segment maps.
.It 4
Rearrange the super block to the same layout as UFS2;
disable the rotational layout tables and per cylinder group
block totals.
.El
.Pp
In interactive mode,
.Nm
will list the conversion to be made
and ask whether the conversion should be done.
If a negative answer is given,
no further operations are done on the file system.
In preen mode,
the conversion is listed and done if
possible without user interaction.
Conversion in preen mode is best used when all the file systems
are being converted at once.
The format of a file system can be determined from the
second line of output from
.Xr dumpfs 8 .
.It Fl d
Print debugging output.
.It Fl F
Indicates that
.Ar filesystem
is a file system image, rather than a raw character device.
.Ar filesystem
will be accessed
.Sq as-is ,
and no attempts will be made to read a disklabel.
.It Fl f
Force checking of file systems.
Normally, if a file system is cleanly unmounted, the kernel will set a
.Dq clean flag
in the file system super block, and
.Nm
will not check the file system.
This option forces
.Nm
to check the file system, regardless of the state of the clean flag.
.It Fl m Ar mode
Use the octal value
.Ar mode
as the permission bits to use when creating the
.Pa lost+found
directory rather than the default 1700.
In particular, systems that do not wish to have lost files accessible
by all users on the system should use a more restrictive
set of permissions such as 700.
.It Fl n
Assume a no response to all questions asked by
.Nm
except for
.Ql CONTINUE? ,
which is assumed to be affirmative;
do not open the file system for writing.
.It Fl P
Display a progress meter for the file system check.
A new meter is displayed for each of the 5 file system check passes, unless
.Fl p
is specified, in which case only one meter for overall progress is displayed.
Progress meters are disabled if the
.Fl d
option is specified.
.It Fl p
Specify
.Dq preen
mode, described above.
.It Fl q
Quiet mode, do not output any messages for clean filesystems.
.It Fl y
Assume a yes response to all questions asked by
.Nm ;
this should be used with great caution as this is a free license
to continue after essentially unlimited trouble has been encountered.
.El
.Pp
Inconsistencies checked are as follows:
.Bl -enum -offset indent -compact
.It
Blocks claimed by more than one inode or the free map.
.It
Blocks claimed by an inode outside the range of the file system.
.It
Incorrect link counts.
.It
Size checks:
.Bl -item -offset indent -compact
.It
Directory size not a multiple of DIRBLKSIZ.
.It
Partially truncated file.
.El
.It
Bad inode format.
.It
Blocks not accounted for anywhere.
.It
Directory checks:
.Bl -item -offset indent -compact
.It
File pointing to unallocated inode.
.It
Inode number out of range.
.It
Dot or dot-dot not the first two entries of a directory
or having the wrong inode number.
.El
.It
Super Block checks:
.Bl -item -offset indent -compact
.It
More blocks for inodes than there are in the file system.
.It
Bad free block map format.
.It
Total free block and/or free inode count incorrect.
.El
.El
.Pp
Orphaned files and directories (allocated but unreferenced) are,
with the operator's concurrence, reconnected by
placing them in the
.Pa lost+found
directory.
The name assigned is the inode number.
If the
.Pa lost+found
directory does not exist, it is created.
If there is insufficient space its size is increased.
.Pp
Because of inconsistencies between the block device and the buffer cache,
the raw device should always be used.
.Sh DIAGNOSTICS
The diagnostics produced by
.Nm
are fully enumerated and explained in Appendix A of
.Rs
.%T "Fsck \- The UNIX File System Check Program"
.Re
.Sh SEE ALSO
.Xr fs 5 ,
.Xr fstab 5 ,
.Xr fsck 8 ,
.Xr fsdb 8 ,
.Xr newfs 8 ,
.Xr reboot 8