Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/i2c/sdtemp.c

747 lines
22 KiB
C
Raw Permalink Blame History

/* $NetBSD: sdtemp.c,v 1.41 2021/12/01 21:33:19 msaitoh Exp $ */
/*
* Copyright (c) 2009 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Goyette.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: sdtemp.c,v 1.41 2021/12/01 21:33:19 msaitoh Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kmem.h>
#include <sys/device.h>
#include <sys/kernel.h>
#include <sys/endian.h>
#include <sys/module.h>
#include <dev/sysmon/sysmonvar.h>
#include <dev/i2c/i2cvar.h>
#include <dev/i2c/sdtemp_reg.h>
struct sdtemp_softc {
device_t sc_dev;
i2c_tag_t sc_tag;
int sc_address;
struct sysmon_envsys *sc_sme;
envsys_data_t *sc_sensor;
sysmon_envsys_lim_t sc_deflims;
uint32_t sc_defprops;
int sc_resolution;
uint16_t sc_mfgid;
uint16_t sc_devid;
uint16_t sc_devid_masked;
uint16_t sc_capability;
};
static int sdtemp_match(device_t, cfdata_t, void *);
static void sdtemp_attach(device_t, device_t, void *);
static int sdtemp_detach(device_t, int);
CFATTACH_DECL_NEW(sdtemp, sizeof(struct sdtemp_softc),
sdtemp_match, sdtemp_attach, sdtemp_detach, NULL);
static void sdtemp_refresh(struct sysmon_envsys *, envsys_data_t *);
static void sdtemp_get_limits(struct sysmon_envsys *, envsys_data_t *,
sysmon_envsys_lim_t *, uint32_t *);
static void sdtemp_set_limits(struct sysmon_envsys *, envsys_data_t *,
sysmon_envsys_lim_t *, uint32_t *);
#ifdef NOT_YET
static int sdtemp_read_8(struct sdtemp_softc *, uint8_t, uint8_t *);
static int sdtemp_write_8(struct sdtemp_softc *, uint8_t, uint8_t);
#endif /* NOT YET */
static int sdtemp_read_16(struct sdtemp_softc *, uint8_t, uint16_t *);
static int sdtemp_write_16(struct sdtemp_softc *, uint8_t, uint16_t);
static uint32_t sdtemp_decode_temp(struct sdtemp_softc *, uint16_t);
static bool sdtemp_pmf_suspend(device_t, const pmf_qual_t *);
static bool sdtemp_pmf_resume(device_t, const pmf_qual_t *);
/* Device dependent config functions */
static void sdtemp_config_mcp(struct sdtemp_softc *);
static void sdtemp_config_idt(struct sdtemp_softc *);
struct sdtemp_dev_entry {
const uint16_t sdtemp_mfg_id;
const uint16_t sdtemp_devrev;
const uint16_t sdtemp_mask;
void (*sdtemp_config)(struct sdtemp_softc *);
const char *sdtemp_desc;
};
/* Convert sysmon_envsys uKelvin value to simple degC */
#define __UK2C(uk) (((uk) - 273150000) / 1000000)
/* List of devices known to conform to JEDEC JC42.4 */
#define CMCP sdtemp_config_mcp
#define CIDT sdtemp_config_idt
static const struct sdtemp_dev_entry
sdtemp_dev_table[] = {
{ AT_MANUFACTURER_ID, AT_30TS00_DEVICE_ID, AT_30TS00_MASK, NULL,
"Atmel AT30TS00" },
{ AT2_MANUFACTURER_ID, AT2_30TSE004_DEVICE_ID, AT2_30TSE004_MASK, NULL,
"Atmel AT30TSE004" },
{ GT_MANUFACTURER_ID, GT_30TS00_DEVICE_ID, GT_30TS00_MASK, NULL,
"Giantec GT30TS00" },
{ GT2_MANUFACTURER_ID, GT2_34TS02_DEVICE_ID, GT2_34TS02_MASK, NULL,
"Giantec GT34TS02" },
{ MAXIM_MANUFACTURER_ID, MAX_6604_DEVICE_ID, MAX_6604_MASK, NULL,
"Maxim MAX6604" },
{ MAXIM_MANUFACTURER_ID, MAX_6604_2_DEVICE_ID, MAX_6604_MASK, NULL,
"Maxim MAX6604" },
{ MCP_MANUFACTURER_ID, MCP_9804_DEVICE_ID, MCP_9804_MASK, CMCP,
"Microchip Tech MCP9804" },
{ MCP_MANUFACTURER_ID, MCP_9805_DEVICE_ID, MCP_9805_MASK, NULL,
"Microchip Tech MCP9805/MCP9843" },
{ MCP_MANUFACTURER_ID, MCP_98242_DEVICE_ID, MCP_98242_MASK, CMCP,
"Microchip Tech MCP98242" },
{ MCP_MANUFACTURER_ID, MCP_98243_DEVICE_ID, MCP_98243_MASK, CMCP,
"Microchip Tech MCP98243" },
{ MCP_MANUFACTURER_ID, MCP_98244_DEVICE_ID, MCP_98244_MASK, CMCP,
"Microchip Tech MCP98244" },
{ MCP2_MANUFACTURER_ID, MCP2_EMC1501_DEVICE_ID, MCP2_EMC1501_MASK, NULL,
"Microchip Tech EMC1501" },
{ ADT_MANUFACTURER_ID, ADT_7408_DEVICE_ID, ADT_7408_MASK, NULL,
"Analog Devices ADT7408" },
{ NXP_MANUFACTURER_ID, NXP_SE98_DEVICE_ID, NXP_SE98_MASK, NULL,
"NXP Semiconductors SE97B/SE98" },
{ NXP_MANUFACTURER_ID, NXP_SE97_DEVICE_ID, NXP_SE97_MASK, NULL,
"NXP Semiconductors SE97" },
{ STTS_MANUFACTURER_ID, STTS_424E_DEVICE_ID, STTS_424E_MASK, NULL,
"STmicroelectronics STTS424E" },
{ STTS_MANUFACTURER_ID, STTS_424_DEVICE_ID, STTS_424_MASK, NULL,
"STmicroelectronics STTS424" },
{ STTS_MANUFACTURER_ID, STTS_2002_DEVICE_ID, STTS_2002_MASK, NULL,
"STmicroelectronics STTS2002" },
{ STTS_MANUFACTURER_ID, STTS_2004_DEVICE_ID, STTS_2004_MASK, NULL,
"STmicroelectronics STTS2004" },
{ STTS_MANUFACTURER_ID, STTS_3000_DEVICE_ID, STTS_3000_MASK, NULL,
"STmicroelectronics STTS3000" },
{ CAT_MANUFACTURER_ID, CAT_34TS02_DEVICE_ID, CAT_34TS02_MASK, NULL,
"Catalyst CAT34TS02/CAT6095" },
{ CAT_MANUFACTURER_ID, CAT_34TS02C_DEVICE_ID, CAT_34TS02C_MASK, NULL,
"Catalyst CAT34TS02C" },
{ CAT_MANUFACTURER_ID, CAT_34TS04_DEVICE_ID, CAT_34TS04_MASK, NULL,
"Catalyst CAT34TS04" },
{ IDT_MANUFACTURER_ID, IDT_TSE2004GB2_DEVICE_ID,IDT_TSE2004GB2_MASK, NULL,
"Integrated Device Technology TSE2004GB2" },
{ IDT_MANUFACTURER_ID, IDT_TS3000B3_DEVICE_ID, IDT_TS3000B3_MASK, CIDT,
"Integrated Device Technology TS3000B3/TSE2002B3" },
{ IDT_MANUFACTURER_ID, IDT_TS3000GB0_DEVICE_ID, IDT_TS3000GB0_MASK, CIDT,
"Integrated Device Technology TS3000GB0" },
{ IDT_MANUFACTURER_ID, IDT_TS3000GB2_DEVICE_ID, IDT_TS3000GB2_MASK, CIDT,
"Integrated Device Technology TS3000GB2" },
{ IDT_MANUFACTURER_ID, IDT_TS3001GB2_DEVICE_ID, IDT_TS3001GB2_MASK, CIDT,
"Integrated Device Technology TS3001GB2" },
/*
* Don't change the location of the following two entries. Device specific
* entry must be located at above.
*/
{ 0, TSE2004AV_ID, TSE2004AV_MASK, NULL,
"TSE2004av compliant device (generic driver)" },
{ 0, 0, 0, NULL, "Unknown" }
};
#undef CMCP
#undef CIDT
static const char *temp_resl[] = {
"0.5C",
"0.25C",
"0.125C",
"0.0625C"
};
static int
sdtemp_lookup(uint16_t mfg, uint16_t devrev)
{
int i;
for (i = 0; sdtemp_dev_table[i].sdtemp_mfg_id; i++) {
if (mfg != sdtemp_dev_table[i].sdtemp_mfg_id)
continue;
if ((devrev & sdtemp_dev_table[i].sdtemp_mask) ==
sdtemp_dev_table[i].sdtemp_devrev)
break;
}
/* Check TSE2004av */
if ((sdtemp_dev_table[i].sdtemp_mfg_id == 0)
&& (SDTEMP_IS_TSE2004AV(devrev) == 0))
i++; /* Unknown */
return i;
}
static int
sdtemp_match(device_t parent, cfdata_t cf, void *aux)
{
struct i2c_attach_args *ia = aux;
uint16_t mfgid, devid, cap;
struct sdtemp_softc sc;
int i, error;
sc.sc_tag = ia->ia_tag;
sc.sc_address = ia->ia_addr;
if ((ia->ia_addr & SDTEMP_ADDRMASK) != SDTEMP_ADDR)
return 0;
/*
* Verify that we can read the manufacturer ID, Device ID and the
* capability
*/
error = iic_acquire_bus(sc.sc_tag, 0);
if (error)
return 0;
error = sdtemp_read_16(&sc, SDTEMP_REG_MFG_ID, &mfgid) |
sdtemp_read_16(&sc, SDTEMP_REG_DEV_REV, &devid) |
sdtemp_read_16(&sc, SDTEMP_REG_CAPABILITY, &cap);
iic_release_bus(sc.sc_tag, 0);
if (error)
return 0;
i = sdtemp_lookup(mfgid, devid);
if ((sdtemp_dev_table[i].sdtemp_mfg_id == 0) &&
(sdtemp_dev_table[i].sdtemp_devrev == 0)) {
aprint_debug("sdtemp: No match for mfg 0x%04x dev 0x%02x "
"rev 0x%02x at address 0x%02x\n", mfgid, devid >> 8,
devid & 0xff, sc.sc_address);
return 0;
}
/*
* Check by SDTEMP_IS_TSE2004AV() might not be enough, so check the
* alarm capability, too.
*/
if ((cap & SDTEMP_CAP_HAS_ALARM) == 0)
return 0;
return I2C_MATCH_ADDRESS_AND_PROBE;
}
static void
sdtemp_attach(device_t parent, device_t self, void *aux)
{
struct sdtemp_softc *sc = device_private(self);
struct i2c_attach_args *ia = aux;
uint16_t mfgid, devid;
int i, error;
sc->sc_tag = ia->ia_tag;
sc->sc_address = ia->ia_addr;
sc->sc_dev = self;
error = iic_acquire_bus(sc->sc_tag, 0);
if (error)
return;
if ((error = sdtemp_read_16(sc, SDTEMP_REG_MFG_ID, &mfgid)) != 0 ||
(error = sdtemp_read_16(sc, SDTEMP_REG_DEV_REV, &devid)) != 0) {
iic_release_bus(sc->sc_tag, 0);
aprint_error(": attach error %d\n", error);
return;
}
sc->sc_mfgid = mfgid;
sc->sc_devid = devid;
i = sdtemp_lookup(mfgid, devid);
sc->sc_devid_masked = devid & sdtemp_dev_table[i].sdtemp_mask;
aprint_naive(": Temp Sensor\n");
aprint_normal(": %s Temp Sensor\n", sdtemp_dev_table[i].sdtemp_desc);
if (sdtemp_dev_table[i].sdtemp_mfg_id == 0) {
if (SDTEMP_IS_TSE2004AV(devid))
aprint_normal_dev(self, "TSE2004av compliant. "
"Manufacturer ID 0x%04hx, Device revision 0x%02x\n",
mfgid, devid & TSE2004AV_REV);
else {
aprint_error_dev(self,
"mfg 0x%04x dev 0x%02x rev 0x%02x at addr 0x%02x\n",
mfgid, devid >> 8, devid & 0xff, ia->ia_addr);
iic_release_bus(sc->sc_tag, 0);
aprint_error_dev(self, "It should no happen. "
"Why attach() found me?\n");
return;
}
}
error = sdtemp_read_16(sc, SDTEMP_REG_CAPABILITY, &sc->sc_capability);
aprint_debug_dev(self, "capability reg = %04x\n", sc->sc_capability);
sc->sc_resolution
= __SHIFTOUT(sc->sc_capability, SDTEMP_CAP_RESOLUTION);
/*
* Call device dependent function here. Currently, it's used for
* the resolution.
*
* IDT's devices and some Microchip's devices have the resolution
* register in the vendor specific registers area. The devices'
* resolution bits in the capability register are not the maximum
* resolution but the current value of the setting.
*/
if (sdtemp_dev_table[i].sdtemp_config != NULL)
sdtemp_dev_table[i].sdtemp_config(sc);
aprint_normal_dev(self, "%s accuracy",
(sc->sc_capability & SDTEMP_CAP_ACCURACY_1C) ? "high" : "default");
if ((sc->sc_capability & SDTEMP_CAP_WIDER_RANGE) != 0)
aprint_normal(", wider range");
aprint_normal(", %s resolution", temp_resl[sc->sc_resolution]);
if ((sc->sc_capability & SDTEMP_CAP_VHV) != 0)
aprint_debug(", high voltage standoff");
aprint_debug(", %s timeout",
(sc->sc_capability & SDTEMP_CAP_TMOUT) ? "25-35ms" : "10-60ms");
if ((sc->sc_capability & SDTEMP_CAP_EVSD) != 0)
aprint_normal(", event with shutdown");
aprint_normal("\n");
/*
* Alarm capability is required; if not present, this is likely
* not a real sdtemp device.
*/
if (error != 0 || (sc->sc_capability & SDTEMP_CAP_HAS_ALARM) == 0) {
iic_release_bus(sc->sc_tag, 0);
aprint_error_dev(self,
"required alarm capability not present!\n");
return;
}
/* Set the configuration to defaults. */
error = sdtemp_write_16(sc, SDTEMP_REG_CONFIG, 0);
if (error != 0) {
iic_release_bus(sc->sc_tag, 0);
aprint_error_dev(self, "error %d writing config register\n",
error);
return;
}
iic_release_bus(sc->sc_tag, 0);
/* Hook us into the sysmon_envsys subsystem */
sc->sc_sme = sysmon_envsys_create();
sc->sc_sme->sme_name = device_xname(self);
sc->sc_sme->sme_cookie = sc;
sc->sc_sme->sme_refresh = sdtemp_refresh;
sc->sc_sme->sme_get_limits = sdtemp_get_limits;
sc->sc_sme->sme_set_limits = sdtemp_set_limits;
sc->sc_sensor = kmem_zalloc(sizeof(envsys_data_t), KM_SLEEP);
/* Initialize sensor data. */
sc->sc_sensor->units = ENVSYS_STEMP;
sc->sc_sensor->state = ENVSYS_SINVALID;
sc->sc_sensor->flags |= ENVSYS_FMONLIMITS;
(void)strlcpy(sc->sc_sensor->desc, device_xname(self),
sizeof(sc->sc_sensor->desc));
snprintf(sc->sc_sensor->desc, sizeof(sc->sc_sensor->desc),
"DIMM %d temperature", sc->sc_address - SDTEMP_ADDR);
/* Now attach the sensor */
if (sysmon_envsys_sensor_attach(sc->sc_sme, sc->sc_sensor)) {
aprint_error_dev(self, "unable to attach sensor\n");
goto bad;
}
/* Register the device */
error = sysmon_envsys_register(sc->sc_sme);
if (error) {
aprint_error_dev(self, "error %d registering with sysmon\n",
error);
goto bad;
}
if (!pmf_device_register(self, sdtemp_pmf_suspend, sdtemp_pmf_resume))
aprint_error_dev(self, "couldn't establish power handler\n");
/* Retrieve and display hardware monitor limits */
sdtemp_get_limits(sc->sc_sme, sc->sc_sensor, &sc->sc_deflims,
&sc->sc_defprops);
aprint_normal_dev(self, "Hardware limits: ");
i = 0;
if (sc->sc_defprops & PROP_WARNMIN) {
aprint_normal("low %dC",
__UK2C(sc->sc_deflims.sel_warnmin));
i++;
}
if (sc->sc_defprops & PROP_WARNMAX) {
aprint_normal("%shigh %dC ", (i)?", ":"",
__UK2C(sc->sc_deflims.sel_warnmax));
i++;
}
if (sc->sc_defprops & PROP_CRITMAX) {
aprint_normal("%scritical %dC ", (i)?", ":"",
__UK2C(sc->sc_deflims.sel_critmax));
i++;
}
aprint_normal("%s\n", (i)?"":"none set");
return;
bad:
kmem_free(sc->sc_sensor, sizeof(envsys_data_t));
sysmon_envsys_destroy(sc->sc_sme);
sc->sc_sme = NULL;
}
static int
sdtemp_detach(device_t self, int flags)
{
struct sdtemp_softc *sc = device_private(self);
pmf_device_deregister(self);
if (sc->sc_sme)
sysmon_envsys_unregister(sc->sc_sme);
if (sc->sc_sensor)
kmem_free(sc->sc_sensor, sizeof(envsys_data_t));
return 0;
}
/* Retrieve current limits from device, and encode in uKelvins */
static void
sdtemp_get_limits(struct sysmon_envsys *sme, envsys_data_t *edata,
sysmon_envsys_lim_t *limits, uint32_t *props)
{
struct sdtemp_softc *sc = sme->sme_cookie;
uint16_t lim;
*props = 0;
if (iic_acquire_bus(sc->sc_tag, 0) != 0)
return;
if (sdtemp_read_16(sc, SDTEMP_REG_LOWER_LIM, &lim) == 0 && lim != 0) {
limits->sel_warnmin = sdtemp_decode_temp(sc, lim);
*props |= PROP_WARNMIN;
}
if (sdtemp_read_16(sc, SDTEMP_REG_UPPER_LIM, &lim) == 0 && lim != 0) {
limits->sel_warnmax = sdtemp_decode_temp(sc, lim);
*props |= PROP_WARNMAX;
}
if (sdtemp_read_16(sc, SDTEMP_REG_CRIT_LIM, &lim) == 0 && lim != 0) {
limits->sel_critmax = sdtemp_decode_temp(sc, lim);
*props |= PROP_CRITMAX;
}
iic_release_bus(sc->sc_tag, 0);
if (*props != 0)
*props |= PROP_DRIVER_LIMITS;
}
/* Send current limit values to the device */
static void
sdtemp_set_limits(struct sysmon_envsys *sme, envsys_data_t *edata,
sysmon_envsys_lim_t *limits, uint32_t *props)
{
uint16_t val;
struct sdtemp_softc *sc = sme->sme_cookie;
if (limits == NULL) {
limits = &sc->sc_deflims;
props = &sc->sc_defprops;
}
if (iic_acquire_bus(sc->sc_tag, 0) != 0)
return;
if (*props & PROP_WARNMIN) {
val = __UK2C(limits->sel_warnmin);
(void)sdtemp_write_16(sc, SDTEMP_REG_LOWER_LIM,
(val << 4) & SDTEMP_TEMP_MASK);
}
if (*props & PROP_WARNMAX) {
val = __UK2C(limits->sel_warnmax);
(void)sdtemp_write_16(sc, SDTEMP_REG_UPPER_LIM,
(val << 4) & SDTEMP_TEMP_MASK);
}
if (*props & PROP_CRITMAX) {
val = __UK2C(limits->sel_critmax);
(void)sdtemp_write_16(sc, SDTEMP_REG_CRIT_LIM,
(val << 4) & SDTEMP_TEMP_MASK);
}
iic_release_bus(sc->sc_tag, 0);
/*
* If at least one limit is set that we can handle, and no
* limits are set that we cannot handle, tell sysmon that
* the driver will take care of monitoring the limits!
*/
if (*props & (PROP_CRITMIN | PROP_BATTCAP | PROP_BATTWARN))
*props &= ~PROP_DRIVER_LIMITS;
else if (*props & PROP_LIMITS)
*props |= PROP_DRIVER_LIMITS;
else
*props &= ~PROP_DRIVER_LIMITS;
}
#ifdef NOT_YET /* All registers on these sensors are 16-bits */
/* Read a 8-bit value from a register */
static int
sdtemp_read_8(struct sdtemp_softc *sc, uint8_t reg, uint8_t *valp)
{
int error;
error = iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP,
sc->sc_address, &reg, 1, valp, sizeof(*valp), 0);
return error;
}
static int
sdtemp_write_8(struct sdtemp_softc *sc, uint8_t reg, uint8_t val)
{
return iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP,
sc->sc_address, &reg, 1, &val, sizeof(val), 0);
}
#endif /* NOT_YET */
/* Read a 16-bit value from a register */
static int
sdtemp_read_16(struct sdtemp_softc *sc, uint8_t reg, uint16_t *valp)
{
int error;
error = iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP,
sc->sc_address, &reg, 1, valp, sizeof(*valp), 0);
if (error)
return error;
*valp = be16toh(*valp);
return 0;
}
static int
sdtemp_write_16(struct sdtemp_softc *sc, uint8_t reg, uint16_t val)
{
uint16_t temp;
temp = htobe16(val);
return iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP,
sc->sc_address, &reg, 1, &temp, sizeof(temp), 0);
}
static uint32_t
sdtemp_decode_temp(struct sdtemp_softc *sc, uint16_t temp)
{
uint32_t val;
int32_t stemp;
/* Get only the temperature bits */
temp &= SDTEMP_TEMP_MASK;
/* If necessary, extend the sign bit */
if ((sc->sc_capability & SDTEMP_CAP_WIDER_RANGE) &&
(temp & SDTEMP_TEMP_NEGATIVE))
temp |= SDTEMP_TEMP_SIGN_EXT;
/* Mask off only bits valid within current resolution */
temp &= ~(0x7 >> sc->sc_resolution);
/* Treat as signed and extend to 32-bits */
stemp = (int16_t)temp;
/* Now convert from 0.0625 (1/16) deg C increments to microKelvins */
val = (stemp * 62500) + 273150000;
return val;
}
static void
sdtemp_refresh(struct sysmon_envsys *sme, envsys_data_t *edata)
{
struct sdtemp_softc *sc = sme->sme_cookie;
uint16_t val;
int error;
error = iic_acquire_bus(sc->sc_tag, 0);
if (error) {
edata->state = ENVSYS_SINVALID;
return;
}
error = sdtemp_read_16(sc, SDTEMP_REG_AMBIENT_TEMP, &val);
iic_release_bus(sc->sc_tag, 0);
if (error) {
edata->state = ENVSYS_SINVALID;
return;
}
edata->value_cur = sdtemp_decode_temp(sc, val);
/* Now check for limits */
if ((edata->upropset & PROP_DRIVER_LIMITS) == 0)
edata->state = ENVSYS_SVALID;
else if ((val & SDTEMP_ABOVE_CRIT) &&
(edata->upropset & PROP_CRITMAX))
edata->state = ENVSYS_SCRITOVER;
else if ((val & SDTEMP_ABOVE_UPPER) &&
(edata->upropset & PROP_WARNMAX))
edata->state = ENVSYS_SWARNOVER;
else if ((val & SDTEMP_BELOW_LOWER) &&
(edata->upropset & PROP_WARNMIN))
edata->state = ENVSYS_SWARNUNDER;
else
edata->state = ENVSYS_SVALID;
}
/*
* Power management functions
*
* We go into "shutdown" mode at suspend time, and return to normal
* mode upon resume. This reduces power consumption by disabling
* the A/D converter.
*/
static bool
sdtemp_pmf_suspend(device_t dev, const pmf_qual_t *qual)
{
struct sdtemp_softc *sc = device_private(dev);
int error;
uint16_t config;
error = iic_acquire_bus(sc->sc_tag, 0);
if (error != 0)
return false;
error = sdtemp_read_16(sc, SDTEMP_REG_CONFIG, &config);
if (error == 0) {
config |= SDTEMP_CONFIG_SHUTDOWN_MODE;
error = sdtemp_write_16(sc, SDTEMP_REG_CONFIG, config);
}
iic_release_bus(sc->sc_tag, 0);
return (error == 0);
}
static bool
sdtemp_pmf_resume(device_t dev, const pmf_qual_t *qual)
{
struct sdtemp_softc *sc = device_private(dev);
int error;
uint16_t config;
error = iic_acquire_bus(sc->sc_tag, 0);
if (error != 0)
return false;
error = sdtemp_read_16(sc, SDTEMP_REG_CONFIG, &config);
if (error == 0) {
config &= ~SDTEMP_CONFIG_SHUTDOWN_MODE;
error = sdtemp_write_16(sc, SDTEMP_REG_CONFIG, config);
}
iic_release_bus(sc->sc_tag, 0);
return (error == 0);
}
/* Device dependent config functions */
static void
sdtemp_config_mcp(struct sdtemp_softc *sc)
{
int rv;
uint8_t resolreg;
/* Note that MCP9805 has no resolution register */
switch (sc->sc_devid_masked) {
case MCP_9804_DEVICE_ID:
case MCP_98242_DEVICE_ID:
case MCP_98243_DEVICE_ID:
resolreg = SDTEMP_REG_MCP_RESOLUTION_9804;
break;
case MCP_98244_DEVICE_ID:
resolreg = SDTEMP_REG_MCP_RESOLUTION_98244;
break;
default:
aprint_error("%s: %s: unknown device ID (%04hx)\n",
device_xname(sc->sc_dev), __func__, sc->sc_devid_masked);
return;
}
/*
* Set resolution to the max.
*
* Even if it fails, the resolution will be the default. It's not a
* fatal error.
*/
rv = sdtemp_write_16(sc, resolreg, SDTEMP_CAP_RESOLUTION_MAX);
if (rv == 0)
sc->sc_resolution = SDTEMP_CAP_RESOLUTION_MAX;
else
aprint_debug_dev(sc->sc_dev,
"error %d writing resolution register\n", rv);
}
static void
sdtemp_config_idt(struct sdtemp_softc *sc)
{
int rv;
/*
* Set resolution to the max.
*
* Even if it fails, the resolution will be the default. It's not a
* fatal error.
*/
rv = sdtemp_write_16(sc, SDTEMP_REG_IDT_RESOLUTION,
__SHIFTIN(SDTEMP_CAP_RESOLUTION_MAX, SDTEMP_CAP_RESOLUTION));
if (rv == 0)
sc->sc_resolution = SDTEMP_CAP_RESOLUTION_MAX;
else
aprint_debug_dev(sc->sc_dev,
"error %d writing resolution register\n", rv);
}
MODULE(MODULE_CLASS_DRIVER, sdtemp, "i2cexec,sysmon_envsys");
#ifdef _MODULE
#include "ioconf.c"
#endif
static int
sdtemp_modcmd(modcmd_t cmd, void *opaque)
{
int error = 0;
switch (cmd) {
case MODULE_CMD_INIT:
#ifdef _MODULE
error = config_init_component(cfdriver_ioconf_sdtemp,
cfattach_ioconf_sdtemp, cfdata_ioconf_sdtemp);
#endif
return error;
case MODULE_CMD_FINI:
#ifdef _MODULE
error = config_fini_component(cfdriver_ioconf_sdtemp,
cfattach_ioconf_sdtemp, cfdata_ioconf_sdtemp);
#endif
return error;
default:
return ENOTTY;
}
}
Reference in New Issue View Git Blame Copy Permalink