326 lines
12 KiB
C
326 lines
12 KiB
C
/* $NetBSD: s3c2800reg.h,v 1.8 2022/05/23 21:46:11 andvar Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2002, 2003 Fujitsu Component Limited
|
|
* Copyright (c) 2002, 2003, 2005 Genetec Corporation
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of The Fujitsu Component Limited nor the name of
|
|
* Genetec corporation may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY FUJITSU COMPONENT LIMITED AND GENETEC
|
|
* CORPORATION ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL FUJITSU COMPONENT LIMITED OR GENETEC
|
|
* CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Samsung S3C2800 processor is ARM920T based integrated CPU
|
|
*
|
|
* Reference:
|
|
* S3C2800 User's Manual
|
|
*/
|
|
#ifndef _ARM_S3C2XX0_S3C2800REG_H_
|
|
#define _ARM_S3C2XX0_S3C2800REG_H_
|
|
|
|
/* common definitions for S3C2800, S3C2400 and S3C2410 */
|
|
#include <arm/s3c2xx0/s3c2xx0reg.h>
|
|
|
|
/*
|
|
* Memory Map
|
|
*/
|
|
|
|
/* ROM/SRAM/FLASH */
|
|
#define S3C2800_SBANK0_START 0x00000000
|
|
#define S3C2800_SBANK1_START 0x02000000
|
|
#define S3C2800_SBANK2_START 0x04000000
|
|
#define S3C2800_SBANK3_START 0x06000000
|
|
#define S3C2800_SBANK4_START 0x08000000
|
|
|
|
/* DRAM */
|
|
#define S3C2800_DBANK0_START 0x08000000
|
|
#define S3C2800_DBANK1_START 0x0a000000
|
|
#define S3C2800_DBANK2_START 0x0c000000
|
|
#define S3C2800_DBANK3_START 0x0e000000
|
|
#define S3C2800_DBANK_SIZE 0x02000000 /* 32MB */
|
|
|
|
/*
|
|
* Physical address of integrated peripherals
|
|
*/
|
|
#define S3C2800_PERIPHERALS 0x10000000
|
|
#define S3C2800_PERIPHERALS_SIZE 0x200000 /* 2MBytes */
|
|
#define S3C2800_CLKMAN_BASE 0x10000000 /* clock & power management */
|
|
#define S3C2800_CLKMAN_SIZE 0x18
|
|
#define S3C2800_MEMCTL_BASE 0x10010000 /* memory controller */
|
|
#define S3C2800_MEMCTL_SIZE 0x20
|
|
#define S3C2800_DMA0_BASE 0x10030000
|
|
#define S3C2800_DMA1_BASE 0x10040000
|
|
#define S3C2800_DMA2_BASE 0x10050000
|
|
#define S3C2800_DMA3_BASE 0x10060000
|
|
#define S3C2800_PCICTL_BASE 0x10080000
|
|
#define S3C2800_PCICTL_SIZE 0x58
|
|
#define S3C2800_GPIO_BASE 0x10100000
|
|
#define S3C2800_GPIO_SIZE 0x50
|
|
#define S3C2800_TIMER0_BASE 0x10130000
|
|
#define S3C2800_TIMER1_BASE 0x10140000
|
|
#define S3C2800_TIMER2_BASE 0x10150000
|
|
#define S3C2800_TIMER_SIZE 0x10
|
|
#define S3C2800_UART0_BASE 0x10170000
|
|
#define S3C2800_UART1_BASE 0x10180000
|
|
#define S3C2800_UART_SIZE 0x2c
|
|
#define S3C2800_IIC0_BASE 0x10190000
|
|
#define S3C2800_IIC1_BASE 0x101a0000
|
|
#define S3C2800_IIC_SIZE 0x10
|
|
#define S3C2800_INTCTL_BASE 0x10020000
|
|
#define S3C2800_INTCTL_SIZE 0x14
|
|
#define S3C2800_WDT_BASE 0x10120000
|
|
#define S3C2800_WDT_SIZE 0x0c
|
|
|
|
|
|
/* width of interrupt controller */
|
|
#define ICU_LEN 29
|
|
#define ICU_INT_HWMASK 0x1fffffff
|
|
|
|
/* Clock & power manager */
|
|
#define CLKMAN_PLLCON 0x00
|
|
|
|
/* MDIV, PDIV, SDIV */
|
|
#define PLLCON_MDIV_SHIFT 12
|
|
#define PLLCON_MDIV_MASK (0xff<<PLLCON_MDIV_SHIFT)
|
|
#define PLLCON_PDIV_SHIFT 4
|
|
#define PLLCON_PDIV_MASK (0x3f<<PLLCON_PDIV_SHIFT)
|
|
#define PLLCON_SDIV_SHIFT 0
|
|
#define PLLCON_SDIV_MASK (0x03<<PLLCON_SDIV_SHIFT)
|
|
|
|
#define CLKMAN_CLKCON 0x04
|
|
#define CLKCON_PCLK (1<<12) /* APB clock division ratio */
|
|
#define CLKCON_HCLK (1<<11) /* AHB clock division ratio */
|
|
#define CLKCON_PCI (1<<10) /* FCLK into PCI */
|
|
#define CLKCON_IIC1 (1<<9) /* PCLK to I2C1 */
|
|
#define CLKCON_IIC0 (1<<8) /* PCLK to I2C0 */
|
|
#define CLKCON_RTC (1<<7) /* PCLK to RTC */
|
|
#define CLKCON_UART1 (1<<6) /* PCLK to UART1 */
|
|
#define CLKCON_UART0 (1<<5) /* PCLK to UART0 */
|
|
#define CLKCON_DMA23 (1<<4) /* PCLK to DMA2,3 */
|
|
#define CLKCON_DMA01 (1<<3) /* PCLK to DMA0,1 */
|
|
#define CLKCON_TIMER (1<<2) /* PCLK to TIMER */
|
|
#define CLKCON_IDLE (1<<1) /* Enter IDLE Mode */
|
|
|
|
#define CLKMAN_CLKSLOW 0x08 /* slow clock control */
|
|
#define CLKSLOW_SLOW (1<<4) /* 1: Enable SLOW mode */
|
|
#define CLKSLOW_VAL_MASK 0x0f /* divider value for slow clock */
|
|
|
|
#define CLKMAN_LOCKTIME 0x0c /* PLL lock time */
|
|
|
|
#define CLKMAN_SWRCON 0x10 /* Software reset control */
|
|
#define SWRCON_SWR (1<<0) /* 1: Invoke software reset */
|
|
|
|
#define CLKMAN_RSTSR 0x14 /* Reset status register */
|
|
#define RSTSR_WDR (1<<2) /* watchdog reset */
|
|
#define RSTSR_SWR (1<<1) /* Software reset */
|
|
#define RSTSR_HWR (1<<0) /* Hardware reset */
|
|
|
|
/* memory controller */
|
|
#define MEMCTL_ENDIAN 0x00 /* Endian control (read-only) */
|
|
#define MEMCTL_SMBCON0 0x04 /* SBank0 control register for static */
|
|
#define MEMCTL_SMBCON1 0x08 /* SBank0 control register for static */
|
|
#define MEMCTL_SMBCON2 0x0c /* SBank0 control register for static */
|
|
#define MEMCTL_SMBCON3 0x10 /* SBank0 control register for static */
|
|
#define SMBCON_WS (1<<20) /* Wait status */
|
|
#define SMBCON_ST (1<<19) /* use UB/LB */
|
|
#define SMBCON_TACS_SHIFT 12 /* address setup time before nSCSn */
|
|
#define SMBCON_TACS (3<<SMBCON_TACS_SHIFT)
|
|
#define SMBCON_TCOS_SHIFT 10 /* CS setup time before nOE */
|
|
#define SMBCON_TCOS (3<<SMBCON_TCOS_SHIFT)
|
|
#define SMBCON_TOCH_SHIFT 8 /* CS hold time after nOE */
|
|
#define SMBCON_TOCH (3<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_SHIFT 4 /* Access cycle */
|
|
#define SMBCON_TACC (0x0f<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_1CLK (0x00<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_2CLK (0x01<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_3CLK (0x02<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_4CLK (0x03<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_6CLK (0x04<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_7CLK (0x05<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_8CLK (0x06<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_9CLK (0x07<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_10CLK (0x08<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_12CLK (0x09<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TACC_14CLK (0x0a<<SMBCON_TOCH_SHIFT)
|
|
#define SMBCON_TCAH_SHIFT 2 /* Address hold time after nSCSn */
|
|
#define SMBCON_SDW 0x03
|
|
#define SMBCON_SDW_8BIT 0
|
|
#define SMBCON_SDW_16BIT 1
|
|
#define SMBCON_SDW_32BIT 2
|
|
#define MEMCTL_REFRESH 0x14 /* DRAM/SDRAM refresh control */
|
|
#define REFRESH_REFEN (1<<23)
|
|
#define REFRESH_REFMD (1<<22)
|
|
#define REFRESH_TRP (3<<20)
|
|
#define REFRESH_TRC (3<<16)
|
|
#define REFRESH_TCHR (3<<12) /* CAS hold time */
|
|
#define REFRESH_COUNTER 0x7ff
|
|
#define MEMCTL_DMTMCON 0x18 /* timing control for dynamic memory */
|
|
#define DMTMCON_DW_SHIFT 16
|
|
#define DMTMCON_DW (3<<DMTMCON_DW_SHIFT) /* bus width */
|
|
#define DMTMCON_MT (3<<10) /* dynamic memory type */
|
|
#define DMTMCON_TRCD (3<<8) /* DRAM RAS to CAS delay */
|
|
#define DMTMCON_TCAS (3<<6) /* CAS pulse width */
|
|
#define DMTMCON_TCP (3<<4) /* CAS pre charge */
|
|
#define DMTMCON_CAN (3<<2) /* column address number */
|
|
#define DMTMCON_STRCD (3<<0) /* SDRAM RAS to CAS delay */
|
|
#define MEMCTL_MRSR 0x1c /* SDRAM mode register */
|
|
#define MRSR_CL_SHIFT 4
|
|
#define MRSR_CL (7<<MRSR_CL_SHIFT) /* CAS latency */
|
|
|
|
/* GPIO */
|
|
#define GPIO_PCONA 0x00 /* port A configuration */
|
|
#define PCON_INPUT 0 /* Input port */
|
|
#define PCON_OUTPUT 1 /* Output port */
|
|
#define PCON_ALTFUN 2 /* Alternate function */
|
|
#define GPIO_PDATA 0x04 /* port A data */
|
|
#define GPIO_PUPA 0x08 /* port A pull-up */
|
|
#define GPIO_PCONB 0x0c
|
|
#define GPIO_PDATB 0x10
|
|
#define GPIO_PCONC 0x18
|
|
#define GPIO_PDATC 0x1c
|
|
#define GPIO_PUPC 0x20
|
|
#define GPIO_PCOND 0x24
|
|
#define GPIO_PDATD 0x28
|
|
#define GPIO_PUPD 0x2c
|
|
#define GPIO_PCONE 0x30
|
|
#define GPIO_PDATE 0x34
|
|
#define GPIO_PUPE 0x38
|
|
#define GPIO_PCONF 0x3c
|
|
#define GPIO_PDATF 0x40
|
|
#define GPIO_PUPF 0x44
|
|
|
|
#define GPIO_EXTINTR 0x48 /* external interrupt control */
|
|
#define EXTINTR_LOW 0x00
|
|
#define EXTINTR_HIGH 0x01
|
|
#define EXTINTR_FALLING 0x02
|
|
#define EXTINTR_RISING 0x04
|
|
#define EXTINTR_BOTH 0x06
|
|
|
|
#define GPIO_SPUCR 0x4c /* special pull-up control */
|
|
#define SPUCR1 (1<<1) /* pull-up for data[31:16] */
|
|
#define SPUCR0 (1<<0) /* pull-up for data[15:0] */
|
|
|
|
/* Timer */
|
|
#define TIMER_TMCON 0x00 /* control register */
|
|
#define TMCON_MUX (3<<2) /* MUX input */
|
|
#define TMCON_MUX_DIV4 (0<<2)
|
|
#define TMCON_MUX_DIV8 (1<<2)
|
|
#define TMCON_MUX_DIV16 (2<<2)
|
|
#define TMCON_MUX_DIV32 (3<<2)
|
|
#define TMCON_INTENA (1<<1) /* Interrupt/DMA enable */
|
|
#define TMCON_ENABLE (1<<0) /* Count enable */
|
|
#define TIMER_TMDAT 0x04 /* data register */
|
|
#define TMDAT_PRESCALER (0xff<<16)
|
|
#define TMDAT_DATA 0xffff
|
|
#define TIMER_TMCNT 0x08 /* down counter */
|
|
|
|
/* UART (Small diffs to S3C2400's UART) */
|
|
#define UMCON_AFC (1<<1) /* auto flow control */
|
|
#define UMSTAT_DCTS (1<<1) /* CTS change */
|
|
|
|
/* Interrupt controller */
|
|
#define INTCTL_IRQPND 0x0c /* IRQ pending */
|
|
#define INTCTL_FIQPND 0x10 /* FIQ pending */
|
|
|
|
/* Interrupt source */
|
|
#define S3C2800_INT_RTC 28 /* RTC alarm */
|
|
#define S3C2800_INT_TICK 27 /* RTC tick */
|
|
#define S3C2800_INT_FULL 26 /* Remocon data FIFO full */
|
|
#define S3C2800_INT_RMT 25 /* Remocon data input */
|
|
#define S3C2800_INT_UERR1 24 /* UART1 error */
|
|
#define S3C2800_INT_UERR0 23 /* UART0 error */
|
|
#define S3C2800_INT_TXD1 22 /* UART1 Tx */
|
|
#define S3C2800_INT_TXD0 21 /* UART0 Tx */
|
|
#define S3C2800_INT_RXD1 20 /* UART1 Rx */
|
|
#define S3C2800_INT_RXD0 19 /* UART0 Rx*/
|
|
#define S3C2800_INT_IIC1 18
|
|
#define S3C2800_INT_IIC0 17
|
|
#define S3C2800_INT_TIMER2 16
|
|
#define S3C2800_INT_TIMER1 15
|
|
#define S3C2800_INT_TIMER0 14
|
|
#define S3C2800_INT_DMA3 13
|
|
#define S3C2800_INT_DMA2 12
|
|
#define S3C2800_INT_DMA1 11
|
|
#define S3C2800_INT_DMA0 10
|
|
#define S3C2800_INT_PCI 8 /* PCI interrupt */
|
|
#define S3C2800_INT_EXT(n) (n) /* External interrupt [7:0] */
|
|
|
|
|
|
/* PCI space */
|
|
#define S3C2800_PCI_BASE 0x20000000
|
|
#define S3C2800_PCI_MEMSPACE_BASE 0x20000000 /* Memory space */
|
|
#define S3C2800_PCI_MEMSPACE_SIZE 0x08000000
|
|
#define S3C2800_PCI_CONF0_BASE 0x28000000 /* Config type 0 space */
|
|
#define S3C2800_PCI_CONF0_SIZE 0x0000b000
|
|
#define S3C2800_PCI_CONF1_BASE 0x2a000000 /* Config type 1 space */
|
|
#define S3C2800_PCI_CONF1_SIZE 0x02000000
|
|
#define S3C2800_PCI_IOSPACE_BASE 0x2e000000
|
|
#define S3C2800_PCI_IOSPACE_SIZE 0x00100000
|
|
|
|
#define PCICTL_PCICON 0x0100 /* control and status */
|
|
#define PCICON_INT (1<<31) /* internal interrupt status */
|
|
#define PCICON_MBS (1<<29) /* PCI master interface busy */
|
|
#define PCICON_TBS (1<<28) /* PCI target interface busy */
|
|
#define PCICON_CRS (1<<27) /* ARM CPU reset status */
|
|
#define PCICON_RDY (1<<9) /* Enable PCI target read */
|
|
#define PCICON_CFD (1<<8) /* Configuration done */
|
|
#define PCICON_ATS (1<<4) /* Enable address translation */
|
|
#define PCICON_ARB (1<<1) /* Enable internal arbiter */
|
|
#define PCICON_HST (1<<0) /* bridge/adaptor */
|
|
|
|
#define PCICTL_PCISET 0x104 /* PCI command, read count, DAC */
|
|
#define PCISET_CMD_SHIFT 17
|
|
#define PCISET_DAC_MASK 0xff
|
|
|
|
#define PCICTL_PCIINTEN 0x108 /* interrupt enable */
|
|
#define PCICTL_PCIINTST 0x10c /* interrupt status */
|
|
|
|
#define PCIINTEN_BAP (1<<31) /* INTA# in adapter mode */
|
|
#define PCIINTST_WDE (1<<31) /* master fatal error in read */
|
|
#define PCIINTST_RDE (1<<30) /* master fatal error in write */
|
|
#define PCIINT_INA (1<<10) /* INTA# enable */
|
|
#define PCIINT_SER (1<<9) /* SERR# interrupt enable */
|
|
#define PCIINT_TPE (1<<4) /* target parity error */
|
|
#define PCIINT_MPE (1<<3) /* master parity error */
|
|
#define PCIINT_MFE (1<<2) /* master fatal error */
|
|
#define PCIINT_PRA (1<<1) /* reset assert interrupt */
|
|
#define PCIINT_PRD (1<<0) /* reset de-assert interrupt */
|
|
|
|
#define PCICTL_PCIBATPA0 0x140 /* address translation PCI to AHB BAR0 */
|
|
#define PCICTL_PCIBAM0 0x144 /* BAR0 mask */
|
|
#define PCICTL_PCIBATPA1 0x148 /* address translation PCI to AHB BAR1 */
|
|
#define PCICTL_PCIBAM1 0x14c /* BAR0 mask */
|
|
#define PCICTL_PCIBATPA2 0x150 /* address translation PCI to AHB BAR2 */
|
|
#define PCICTL_PCIBAM2 0x154 /* BAR0 mask */
|
|
|
|
/* Watch dog timer */
|
|
#define WDT_WTPSCLR 0x00
|
|
#define WDT_WTCON 0x04
|
|
#define WTCON_WDTSTOP 0xa5
|
|
#define WDT_WTCNT 0x08
|
|
|
|
#endif /* _ARM_S3C2XX0_S3C2800REG_H_ */
|