Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/ata/ata.c

2369 lines
59 KiB
C
Raw Permalink Blame History

/* $NetBSD: ata.c,v 1.148 2019/04/06 00:35:25 uwe Exp $ */
/*
* Copyright (c) 1998, 2001 Manuel Bouyer. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: ata.c,v 1.148 2019/04/06 00:35:25 uwe Exp $");
#include "opt_ata.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
#include <sys/proc.h>
#include <sys/kthread.h>
#include <sys/errno.h>
#include <sys/ataio.h>
#include <sys/kmem.h>
#include <sys/intr.h>
#include <sys/bus.h>
#include <sys/once.h>
#include <sys/bitops.h>
#define ATABUS_PRIVATE
#include <dev/ata/ataconf.h>
#include <dev/ata/atareg.h>
#include <dev/ata/atavar.h>
#include <dev/ic/wdcvar.h> /* for PIOBM */
#include "ioconf.h"
#include "locators.h"
#include "atapibus.h"
#include "ataraid.h"
#include "sata_pmp.h"
#if NATARAID > 0
#include <dev/ata/ata_raidvar.h>
#endif
#if NSATA_PMP > 0
#include <dev/ata/satapmpvar.h>
#endif
#include <dev/ata/satapmpreg.h>
#define DEBUG_FUNCS 0x08
#define DEBUG_PROBE 0x10
#define DEBUG_DETACH 0x20
#define DEBUG_XFERS 0x40
#ifdef ATADEBUG
#ifndef ATADEBUG_MASK
#define ATADEBUG_MASK 0
#endif
int atadebug_mask = ATADEBUG_MASK;
#define ATADEBUG_PRINT(args, level) \
if (atadebug_mask & (level)) \
printf args
#else
#define ATADEBUG_PRINT(args, level)
#endif
static ONCE_DECL(ata_init_ctrl);
static struct pool ata_xfer_pool;
/*
* A queue of atabus instances, used to ensure the same bus probe order
* for a given hardware configuration at each boot. Kthread probing
* devices on a atabus. Only one probing at once.
*/
static TAILQ_HEAD(, atabus_initq) atabus_initq_head;
static kmutex_t atabus_qlock;
static kcondvar_t atabus_qcv;
static lwp_t * atabus_cfg_lwp;
/*****************************************************************************
* ATA bus layer.
*
* ATA controllers attach an atabus instance, which handles probing the bus
* for drives, etc.
*****************************************************************************/
dev_type_open(atabusopen);
dev_type_close(atabusclose);
dev_type_ioctl(atabusioctl);
const struct cdevsw atabus_cdevsw = {
.d_open = atabusopen,
.d_close = atabusclose,
.d_read = noread,
.d_write = nowrite,
.d_ioctl = atabusioctl,
.d_stop = nostop,
.d_tty = notty,
.d_poll = nopoll,
.d_mmap = nommap,
.d_kqfilter = nokqfilter,
.d_discard = nodiscard,
.d_flag = D_OTHER
};
static void atabus_childdetached(device_t, device_t);
static int atabus_rescan(device_t, const char *, const int *);
static bool atabus_resume(device_t, const pmf_qual_t *);
static bool atabus_suspend(device_t, const pmf_qual_t *);
static void atabusconfig_thread(void *);
static void ata_channel_idle(struct ata_channel *);
static void ata_activate_xfer_locked(struct ata_channel *, struct ata_xfer *);
static void ata_channel_freeze_locked(struct ata_channel *);
static void ata_thread_wake_locked(struct ata_channel *);
/*
* atabus_init:
*
* Initialize ATA subsystem structures.
*/
static int
atabus_init(void)
{
pool_init(&ata_xfer_pool, sizeof(struct ata_xfer), 0, 0, 0,
"ataspl", NULL, IPL_BIO);
TAILQ_INIT(&atabus_initq_head);
mutex_init(&atabus_qlock, MUTEX_DEFAULT, IPL_NONE);
cv_init(&atabus_qcv, "atainitq");
return 0;
}
/*
* atabusprint:
*
* Autoconfiguration print routine used by ATA controllers when
* attaching an atabus instance.
*/
int
atabusprint(void *aux, const char *pnp)
{
struct ata_channel *chan = aux;
if (pnp)
aprint_normal("atabus at %s", pnp);
aprint_normal(" channel %d", chan->ch_channel);
return (UNCONF);
}
/*
* ataprint:
*
* Autoconfiguration print routine.
*/
int
ataprint(void *aux, const char *pnp)
{
struct ata_device *adev = aux;
if (pnp)
aprint_normal("wd at %s", pnp);
aprint_normal(" drive %d", adev->adev_drv_data->drive);
return (UNCONF);
}
/*
* ata_channel_attach:
*
* Common parts of attaching an atabus to an ATA controller channel.
*/
void
ata_channel_attach(struct ata_channel *chp)
{
if (chp->ch_flags & ATACH_DISABLED)
return;
ata_channel_init(chp);
KASSERT(chp->ch_queue != NULL);
chp->atabus = config_found_ia(chp->ch_atac->atac_dev, "ata", chp,
atabusprint);
}
/*
* ata_channel_detach:
*
* Common parts of detaching an atabus to an ATA controller channel.
*/
void
ata_channel_detach(struct ata_channel *chp)
{
if (chp->ch_flags & ATACH_DISABLED)
return;
ata_channel_destroy(chp);
chp->ch_flags |= ATACH_DETACHED;
}
static void
atabusconfig(struct atabus_softc *atabus_sc)
{
struct ata_channel *chp = atabus_sc->sc_chan;
struct atac_softc *atac = chp->ch_atac;
struct atabus_initq *atabus_initq = NULL;
int i, error;
/* we are in the atabus's thread context */
ata_channel_lock(chp);
chp->ch_flags |= ATACH_TH_RUN;
ata_channel_unlock(chp);
/*
* Probe for the drives attached to controller, unless a PMP
* is already known
*/
/* XXX for SATA devices we will power up all drives at once */
if (chp->ch_satapmp_nports == 0)
(*atac->atac_probe)(chp);
if (chp->ch_ndrives >= 2) {
ATADEBUG_PRINT(("atabusattach: ch_drive_type 0x%x 0x%x\n",
chp->ch_drive[0].drive_type, chp->ch_drive[1].drive_type),
DEBUG_PROBE);
}
/* next operations will occurs in a separate thread */
ata_channel_lock(chp);
chp->ch_flags &= ~ATACH_TH_RUN;
ata_channel_unlock(chp);
/* Make sure the devices probe in atabus order to avoid jitter. */
mutex_enter(&atabus_qlock);
for (;;) {
atabus_initq = TAILQ_FIRST(&atabus_initq_head);
if (atabus_initq->atabus_sc == atabus_sc)
break;
cv_wait(&atabus_qcv, &atabus_qlock);
}
mutex_exit(&atabus_qlock);
ata_channel_lock(chp);
/* If no drives, abort here */
if (chp->ch_drive == NULL)
goto out;
KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL);
for (i = 0; i < chp->ch_ndrives; i++)
if (chp->ch_drive[i].drive_type != ATA_DRIVET_NONE)
break;
if (i == chp->ch_ndrives)
goto out;
/* Shortcut in case we've been shutdown */
if (chp->ch_flags & ATACH_SHUTDOWN)
goto out;
ata_channel_unlock(chp);
if ((error = kthread_create(PRI_NONE, 0, NULL, atabusconfig_thread,
atabus_sc, &atabus_cfg_lwp,
"%scnf", device_xname(atac->atac_dev))) != 0)
aprint_error_dev(atac->atac_dev,
"unable to create config thread: error %d\n", error);
return;
out:
ata_channel_unlock(chp);
mutex_enter(&atabus_qlock);
TAILQ_REMOVE(&atabus_initq_head, atabus_initq, atabus_initq);
cv_broadcast(&atabus_qcv);
mutex_exit(&atabus_qlock);
kmem_free(atabus_initq, sizeof(*atabus_initq));
ata_delref(chp);
config_pending_decr(atac->atac_dev);
}
/*
* atabus_configthread: finish attach of atabus's childrens, in a separate
* kernel thread.
*/
static void
atabusconfig_thread(void *arg)
{
struct atabus_softc *atabus_sc = arg;
struct ata_channel *chp = atabus_sc->sc_chan;
struct atac_softc *atac = chp->ch_atac;
struct atabus_initq *atabus_initq = NULL;
int i, s;
/* XXX seems wrong */
mutex_enter(&atabus_qlock);
atabus_initq = TAILQ_FIRST(&atabus_initq_head);
KASSERT(atabus_initq->atabus_sc == atabus_sc);
mutex_exit(&atabus_qlock);
/*
* First look for a port multiplier
*/
if (chp->ch_ndrives == PMP_MAX_DRIVES &&
chp->ch_drive[PMP_PORT_CTL].drive_type == ATA_DRIVET_PM) {
#if NSATA_PMP > 0
satapmp_attach(chp);
#else
aprint_error_dev(atabus_sc->sc_dev,
"SATA port multiplier not supported\n");
/* no problems going on, all drives are ATA_DRIVET_NONE */
#endif
}
/*
* Attach an ATAPI bus, if needed.
*/
KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL);
for (i = 0; i < chp->ch_ndrives && chp->atapibus == NULL; i++) {
if (chp->ch_drive[i].drive_type == ATA_DRIVET_ATAPI) {
#if NATAPIBUS > 0
(*atac->atac_atapibus_attach)(atabus_sc);
#else
/*
* Fake the autoconfig "not configured" message
*/
aprint_normal("atapibus at %s not configured\n",
device_xname(atac->atac_dev));
chp->atapibus = NULL;
s = splbio();
for (i = 0; i < chp->ch_ndrives; i++) {
if (chp->ch_drive[i].drive_type == ATA_DRIVET_ATAPI)
chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
}
splx(s);
#endif
break;
}
}
for (i = 0; i < chp->ch_ndrives; i++) {
struct ata_device adev;
if (chp->ch_drive[i].drive_type != ATA_DRIVET_ATA &&
chp->ch_drive[i].drive_type != ATA_DRIVET_OLD) {
continue;
}
if (chp->ch_drive[i].drv_softc != NULL)
continue;
memset(&adev, 0, sizeof(struct ata_device));
adev.adev_bustype = atac->atac_bustype_ata;
adev.adev_channel = chp->ch_channel;
adev.adev_drv_data = &chp->ch_drive[i];
chp->ch_drive[i].drv_softc = config_found_ia(atabus_sc->sc_dev,
"ata_hl", &adev, ataprint);
if (chp->ch_drive[i].drv_softc != NULL) {
ata_probe_caps(&chp->ch_drive[i]);
} else {
s = splbio();
chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
splx(s);
}
}
/* now that we know the drives, the controller can set its modes */
if (atac->atac_set_modes) {
(*atac->atac_set_modes)(chp);
ata_print_modes(chp);
}
#if NATARAID > 0
if (atac->atac_cap & ATAC_CAP_RAID) {
for (i = 0; i < chp->ch_ndrives; i++) {
if (chp->ch_drive[i].drive_type == ATA_DRIVET_ATA) {
ata_raid_check_component(
chp->ch_drive[i].drv_softc);
}
}
}
#endif /* NATARAID > 0 */
/*
* reset drive_flags for unattached devices, reset state for attached
* ones
*/
s = splbio();
for (i = 0; i < chp->ch_ndrives; i++) {
if (chp->ch_drive[i].drive_type == ATA_DRIVET_PM)
continue;
if (chp->ch_drive[i].drv_softc == NULL) {
chp->ch_drive[i].drive_flags = 0;
chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
} else
chp->ch_drive[i].state = 0;
}
splx(s);
mutex_enter(&atabus_qlock);
TAILQ_REMOVE(&atabus_initq_head, atabus_initq, atabus_initq);
cv_broadcast(&atabus_qcv);
mutex_exit(&atabus_qlock);
kmem_free(atabus_initq, sizeof(*atabus_initq));
ata_delref(chp);
config_pending_decr(atac->atac_dev);
kthread_exit(0);
}
/*
* atabus_thread:
*
* Worker thread for the ATA bus.
*/
static void
atabus_thread(void *arg)
{
struct atabus_softc *sc = arg;
struct ata_channel *chp = sc->sc_chan;
struct ata_queue *chq = chp->ch_queue;
struct ata_xfer *xfer;
int i, rv;
ata_channel_lock(chp);
chp->ch_flags |= ATACH_TH_RUN;
/*
* Probe the drives. Reset type to indicate to controllers
* that can re-probe that all drives must be probed..
*
* Note: ch_ndrives may be changed during the probe.
*/
KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL);
for (i = 0; i < chp->ch_ndrives; i++) {
chp->ch_drive[i].drive_flags = 0;
chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
}
ata_channel_unlock(chp);
atabusconfig(sc);
ata_channel_lock(chp);
for (;;) {
if ((chp->ch_flags & (ATACH_TH_RESET | ATACH_TH_DRIVE_RESET
| ATACH_TH_RECOVERY | ATACH_SHUTDOWN)) == 0 &&
(chq->queue_active == 0 || chq->queue_freeze == 0)) {
chp->ch_flags &= ~ATACH_TH_RUN;
cv_wait(&chp->ch_thr_idle, &chp->ch_lock);
chp->ch_flags |= ATACH_TH_RUN;
}
if (chp->ch_flags & ATACH_SHUTDOWN) {
break;
}
if (chp->ch_flags & ATACH_TH_RESCAN) {
chp->ch_flags &= ~ATACH_TH_RESCAN;
ata_channel_unlock(chp);
atabusconfig(sc);
ata_channel_lock(chp);
}
if (chp->ch_flags & ATACH_TH_RESET) {
/* this will unfreeze the channel */
ata_thread_run(chp, AT_WAIT,
ATACH_TH_RESET, ATACH_NODRIVE);
} else if (chp->ch_flags & ATACH_TH_DRIVE_RESET) {
/* this will unfreeze the channel */
for (i = 0; i < chp->ch_ndrives; i++) {
struct ata_drive_datas *drvp;
drvp = &chp->ch_drive[i];
if (drvp->drive_flags & ATA_DRIVE_TH_RESET) {
ata_thread_run(chp,
AT_WAIT, ATACH_TH_DRIVE_RESET, i);
}
}
chp->ch_flags &= ~ATACH_TH_DRIVE_RESET;
} else if (chp->ch_flags & ATACH_TH_RECOVERY) {
/*
* This will unfreeze the channel; drops locks during
* run, so must wrap in splbio()/splx() to avoid
* spurious interrupts. XXX MPSAFE
*/
int s = splbio();
ata_thread_run(chp, AT_WAIT, ATACH_TH_RECOVERY,
chp->recovery_tfd);
splx(s);
} else if (chq->queue_active > 0 && chq->queue_freeze == 1) {
/*
* Caller has bumped queue_freeze, decrease it. This
* flow shalt never be executed for NCQ commands.
*/
KASSERT((chp->ch_flags & ATACH_NCQ) == 0);
KASSERT(chq->queue_active == 1);
ata_channel_thaw_locked(chp);
xfer = ata_queue_get_active_xfer_locked(chp);
KASSERT(xfer != NULL);
KASSERT((xfer->c_flags & C_POLL) == 0);
switch ((rv = ata_xfer_start(xfer))) {
case ATASTART_STARTED:
case ATASTART_POLL:
case ATASTART_ABORT:
break;
case ATASTART_TH:
default:
panic("%s: ata_xfer_start() unexpected rv %d",
__func__, rv);
/* NOTREACHED */
}
} else if (chq->queue_freeze > 1)
panic("%s: queue_freeze", __func__);
/* Try to run down the queue once channel is unfrozen */
if (chq->queue_freeze == 0) {
ata_channel_unlock(chp);
atastart(chp);
ata_channel_lock(chp);
}
}
chp->ch_thread = NULL;
cv_signal(&chp->ch_thr_idle);
ata_channel_unlock(chp);
kthread_exit(0);
}
static void
ata_thread_wake_locked(struct ata_channel *chp)
{
KASSERT(mutex_owned(&chp->ch_lock));
ata_channel_freeze_locked(chp);
cv_signal(&chp->ch_thr_idle);
}
/*
* atabus_match:
*
* Autoconfiguration match routine.
*/
static int
atabus_match(device_t parent, cfdata_t cf, void *aux)
{
struct ata_channel *chp = aux;
if (chp == NULL)
return (0);
if (cf->cf_loc[ATACF_CHANNEL] != chp->ch_channel &&
cf->cf_loc[ATACF_CHANNEL] != ATACF_CHANNEL_DEFAULT)
return (0);
return (1);
}
/*
* atabus_attach:
*
* Autoconfiguration attach routine.
*/
static void
atabus_attach(device_t parent, device_t self, void *aux)
{
struct atabus_softc *sc = device_private(self);
struct ata_channel *chp = aux;
struct atabus_initq *initq;
int error;
sc->sc_chan = chp;
aprint_normal("\n");
aprint_naive("\n");
sc->sc_dev = self;
if (ata_addref(chp))
return;
RUN_ONCE(&ata_init_ctrl, atabus_init);
initq = kmem_zalloc(sizeof(*initq), KM_SLEEP);
initq->atabus_sc = sc;
mutex_enter(&atabus_qlock);
TAILQ_INSERT_TAIL(&atabus_initq_head, initq, atabus_initq);
mutex_exit(&atabus_qlock);
config_pending_incr(sc->sc_dev);
/* XXX MPSAFE - no KTHREAD_MPSAFE, so protected by KERNEL_LOCK() */
if ((error = kthread_create(PRI_NONE, 0, NULL, atabus_thread, sc,
&chp->ch_thread, "%s", device_xname(self))) != 0)
aprint_error_dev(self,
"unable to create kernel thread: error %d\n", error);
if (!pmf_device_register(self, atabus_suspend, atabus_resume))
aprint_error_dev(self, "couldn't establish power handler\n");
}
/*
* atabus_detach:
*
* Autoconfiguration detach routine.
*/
static int
atabus_detach(device_t self, int flags)
{
struct atabus_softc *sc = device_private(self);
struct ata_channel *chp = sc->sc_chan;
device_t dev = NULL;
int i, error = 0;
/*
* Detach atapibus and its children.
*/
if ((dev = chp->atapibus) != NULL) {
ATADEBUG_PRINT(("atabus_detach: %s: detaching %s\n",
device_xname(self), device_xname(dev)), DEBUG_DETACH);
error = config_detach(dev, flags);
if (error)
goto out;
KASSERT(chp->atapibus == NULL);
}
KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL);
/*
* Detach our other children.
*/
for (i = 0; i < chp->ch_ndrives; i++) {
if (chp->ch_drive[i].drive_type == ATA_DRIVET_ATAPI)
continue;
if (chp->ch_drive[i].drive_type == ATA_DRIVET_PM)
chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
if ((dev = chp->ch_drive[i].drv_softc) != NULL) {
ATADEBUG_PRINT(("%s.%d: %s: detaching %s\n", __func__,
__LINE__, device_xname(self), device_xname(dev)),
DEBUG_DETACH);
error = config_detach(dev, flags);
if (error)
goto out;
KASSERT(chp->ch_drive[i].drv_softc == NULL);
KASSERT(chp->ch_drive[i].drive_type == 0);
}
}
/* Shutdown the channel. */
ata_channel_lock(chp);
chp->ch_flags |= ATACH_SHUTDOWN;
while (chp->ch_thread != NULL) {
cv_signal(&chp->ch_thr_idle);
cv_wait(&chp->ch_thr_idle, &chp->ch_lock);
}
ata_channel_unlock(chp);
atabus_free_drives(chp);
out:
#ifdef ATADEBUG
if (dev != NULL && error != 0)
ATADEBUG_PRINT(("%s: %s: error %d detaching %s\n", __func__,
device_xname(self), error, device_xname(dev)),
DEBUG_DETACH);
#endif /* ATADEBUG */
return (error);
}
void
atabus_childdetached(device_t self, device_t child)
{
bool found = false;
struct atabus_softc *sc = device_private(self);
struct ata_channel *chp = sc->sc_chan;
int i;
KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL);
/*
* atapibus detached.
*/
if (child == chp->atapibus) {
chp->atapibus = NULL;
found = true;
for (i = 0; i < chp->ch_ndrives; i++) {
if (chp->ch_drive[i].drive_type != ATA_DRIVET_ATAPI)
continue;
KASSERT(chp->ch_drive[i].drv_softc != NULL);
chp->ch_drive[i].drv_softc = NULL;
chp->ch_drive[i].drive_flags = 0;
chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
}
}
/*
* Detach our other children.
*/
for (i = 0; i < chp->ch_ndrives; i++) {
if (chp->ch_drive[i].drive_type == ATA_DRIVET_ATAPI)
continue;
if (child == chp->ch_drive[i].drv_softc) {
chp->ch_drive[i].drv_softc = NULL;
chp->ch_drive[i].drive_flags = 0;
if (chp->ch_drive[i].drive_type == ATA_DRIVET_PM)
chp->ch_satapmp_nports = 0;
chp->ch_drive[i].drive_type = ATA_DRIVET_NONE;
found = true;
}
}
if (!found)
panic("%s: unknown child %p", device_xname(self),
(const void *)child);
}
CFATTACH_DECL3_NEW(atabus, sizeof(struct atabus_softc),
atabus_match, atabus_attach, atabus_detach, NULL, atabus_rescan,
atabus_childdetached, DVF_DETACH_SHUTDOWN);
/*****************************************************************************
* Common ATA bus operations.
*****************************************************************************/
/* allocate/free the channel's ch_drive[] array */
int
atabus_alloc_drives(struct ata_channel *chp, int ndrives)
{
int i;
if (chp->ch_ndrives != ndrives)
atabus_free_drives(chp);
if (chp->ch_drive == NULL) {
chp->ch_drive = kmem_zalloc(
sizeof(struct ata_drive_datas) * ndrives, KM_NOSLEEP);
}
if (chp->ch_drive == NULL) {
aprint_error_dev(chp->ch_atac->atac_dev,
"can't alloc drive array\n");
chp->ch_ndrives = 0;
return ENOMEM;
};
for (i = 0; i < ndrives; i++) {
chp->ch_drive[i].chnl_softc = chp;
chp->ch_drive[i].drive = i;
}
chp->ch_ndrives = ndrives;
return 0;
}
void
atabus_free_drives(struct ata_channel *chp)
{
#ifdef DIAGNOSTIC
int i;
int dopanic = 0;
KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL);
for (i = 0; i < chp->ch_ndrives; i++) {
if (chp->ch_drive[i].drive_type != ATA_DRIVET_NONE) {
printf("%s: ch_drive[%d] type %d != ATA_DRIVET_NONE\n",
device_xname(chp->atabus), i,
chp->ch_drive[i].drive_type);
dopanic = 1;
}
if (chp->ch_drive[i].drv_softc != NULL) {
printf("%s: ch_drive[%d] attached to %s\n",
device_xname(chp->atabus), i,
device_xname(chp->ch_drive[i].drv_softc));
dopanic = 1;
}
}
if (dopanic)
panic("atabus_free_drives");
#endif
if (chp->ch_drive == NULL)
return;
kmem_free(chp->ch_drive,
sizeof(struct ata_drive_datas) * chp->ch_ndrives);
chp->ch_ndrives = 0;
chp->ch_drive = NULL;
}
/* Get the disk's parameters */
int
ata_get_params(struct ata_drive_datas *drvp, uint8_t flags,
struct ataparams *prms)
{
struct ata_xfer *xfer;
struct ata_channel *chp = drvp->chnl_softc;
struct atac_softc *atac = chp->ch_atac;
char *tb;
int i, rv;
uint16_t *p;
ATADEBUG_PRINT(("%s\n", __func__), DEBUG_FUNCS);
xfer = ata_get_xfer(chp, false);
if (xfer == NULL) {
ATADEBUG_PRINT(("%s: no xfer\n", __func__),
DEBUG_FUNCS|DEBUG_PROBE);
return CMD_AGAIN;
}
tb = kmem_zalloc(ATA_BSIZE, KM_SLEEP);
memset(prms, 0, sizeof(struct ataparams));
if (drvp->drive_type == ATA_DRIVET_ATA) {
xfer->c_ata_c.r_command = WDCC_IDENTIFY;
xfer->c_ata_c.r_st_bmask = WDCS_DRDY;
xfer->c_ata_c.r_st_pmask = WDCS_DRQ;
xfer->c_ata_c.timeout = 3000; /* 3s */
} else if (drvp->drive_type == ATA_DRIVET_ATAPI) {
xfer->c_ata_c.r_command = ATAPI_IDENTIFY_DEVICE;
xfer->c_ata_c.r_st_bmask = 0;
xfer->c_ata_c.r_st_pmask = WDCS_DRQ;
xfer->c_ata_c.timeout = 10000; /* 10s */
} else {
ATADEBUG_PRINT(("ata_get_parms: no disks\n"),
DEBUG_FUNCS|DEBUG_PROBE);
rv = CMD_ERR;
goto out;
}
xfer->c_ata_c.flags = AT_READ | flags;
xfer->c_ata_c.data = tb;
xfer->c_ata_c.bcount = ATA_BSIZE;
if ((*atac->atac_bustype_ata->ata_exec_command)(drvp,
xfer) != ATACMD_COMPLETE) {
ATADEBUG_PRINT(("ata_get_parms: wdc_exec_command failed\n"),
DEBUG_FUNCS|DEBUG_PROBE);
rv = CMD_AGAIN;
goto out;
}
if (xfer->c_ata_c.flags & (AT_ERROR | AT_TIMEOU | AT_DF)) {
ATADEBUG_PRINT(("ata_get_parms: ata_c.flags=0x%x\n",
xfer->c_ata_c.flags), DEBUG_FUNCS|DEBUG_PROBE);
rv = CMD_ERR;
goto out;
}
/* if we didn't read any data something is wrong */
if ((xfer->c_ata_c.flags & AT_XFDONE) == 0) {
rv = CMD_ERR;
goto out;
}
/* Read in parameter block. */
memcpy(prms, tb, sizeof(struct ataparams));
/*
* Shuffle string byte order.
* ATAPI NEC, Mitsumi and Pioneer drives and
* old ATA TDK CompactFlash cards
* have different byte order.
*/
#if BYTE_ORDER == BIG_ENDIAN
# define M(n) prms->atap_model[(n) ^ 1]
#else
# define M(n) prms->atap_model[n]
#endif
if (
#if BYTE_ORDER == BIG_ENDIAN
!
#endif
((drvp->drive_type == ATA_DRIVET_ATAPI) ?
((M(0) == 'N' && M(1) == 'E') ||
(M(0) == 'F' && M(1) == 'X') ||
(M(0) == 'P' && M(1) == 'i')) :
((M(0) == 'T' && M(1) == 'D' && M(2) == 'K')))) {
rv = CMD_OK;
goto out;
}
#undef M
for (i = 0; i < sizeof(prms->atap_model); i += 2) {
p = (uint16_t *)(prms->atap_model + i);
*p = bswap16(*p);
}
for (i = 0; i < sizeof(prms->atap_serial); i += 2) {
p = (uint16_t *)(prms->atap_serial + i);
*p = bswap16(*p);
}
for (i = 0; i < sizeof(prms->atap_revision); i += 2) {
p = (uint16_t *)(prms->atap_revision + i);
*p = bswap16(*p);
}
rv = CMD_OK;
out:
kmem_free(tb, ATA_BSIZE);
ata_free_xfer(chp, xfer);
return rv;
}
int
ata_set_mode(struct ata_drive_datas *drvp, uint8_t mode, uint8_t flags)
{
struct ata_xfer *xfer;
int rv;
struct ata_channel *chp = drvp->chnl_softc;
struct atac_softc *atac = chp->ch_atac;
ATADEBUG_PRINT(("ata_set_mode=0x%x\n", mode), DEBUG_FUNCS);
xfer = ata_get_xfer(chp, false);
if (xfer == NULL) {
ATADEBUG_PRINT(("%s: no xfer\n", __func__),
DEBUG_FUNCS|DEBUG_PROBE);
return CMD_AGAIN;
}
xfer->c_ata_c.r_command = SET_FEATURES;
xfer->c_ata_c.r_st_bmask = 0;
xfer->c_ata_c.r_st_pmask = 0;
xfer->c_ata_c.r_features = WDSF_SET_MODE;
xfer->c_ata_c.r_count = mode;
xfer->c_ata_c.flags = flags;
xfer->c_ata_c.timeout = 1000; /* 1s */
if ((*atac->atac_bustype_ata->ata_exec_command)(drvp,
xfer) != ATACMD_COMPLETE) {
rv = CMD_AGAIN;
goto out;
}
if (xfer->c_ata_c.flags & (AT_ERROR | AT_TIMEOU | AT_DF)) {
rv = CMD_ERR;
goto out;
}
rv = CMD_OK;
out:
ata_free_xfer(chp, xfer);
return rv;
}
#if NATA_DMA
void
ata_dmaerr(struct ata_drive_datas *drvp, int flags)
{
ata_channel_lock_owned(drvp->chnl_softc);
/*
* Downgrade decision: if we get NERRS_MAX in NXFER.
* We start with n_dmaerrs set to NERRS_MAX-1 so that the
* first error within the first NXFER ops will immediatly trigger
* a downgrade.
* If we got an error and n_xfers is bigger than NXFER reset counters.
*/
drvp->n_dmaerrs++;
if (drvp->n_dmaerrs >= NERRS_MAX && drvp->n_xfers <= NXFER) {
ata_downgrade_mode(drvp, flags);
drvp->n_dmaerrs = NERRS_MAX-1;
drvp->n_xfers = 0;
return;
}
if (drvp->n_xfers > NXFER) {
drvp->n_dmaerrs = 1; /* just got an error */
drvp->n_xfers = 1; /* restart counting from this error */
}
}
#endif /* NATA_DMA */
/*
* freeze the queue and wait for the controller to be idle. Caller has to
* unfreeze/restart the queue
*/
static void
ata_channel_idle(struct ata_channel *chp)
{
ata_channel_lock(chp);
ata_channel_freeze_locked(chp);
while (chp->ch_queue->queue_active > 0) {
chp->ch_queue->queue_flags |= QF_IDLE_WAIT;
cv_timedwait(&chp->ch_queue->queue_idle, &chp->ch_lock, 1);
}
ata_channel_unlock(chp);
}
/*
* Add a command to the queue and start controller.
*
* MUST BE CALLED AT splbio()!
*/
void
ata_exec_xfer(struct ata_channel *chp, struct ata_xfer *xfer)
{
ATADEBUG_PRINT(("ata_exec_xfer %p channel %d drive %d\n", xfer,
chp->ch_channel, xfer->c_drive), DEBUG_XFERS);
/* complete xfer setup */
xfer->c_chp = chp;
ata_channel_lock(chp);
/*
* Standard commands are added to the end of command list, but
* recovery commands must be run immediatelly.
*/
if ((xfer->c_flags & C_SKIP_QUEUE) == 0)
SIMPLEQ_INSERT_TAIL(&chp->ch_queue->queue_xfer, xfer,
c_xferchain);
else
SIMPLEQ_INSERT_HEAD(&chp->ch_queue->queue_xfer, xfer,
c_xferchain);
/*
* if polling and can sleep, wait for the xfer to be at head of queue
*/
if ((xfer->c_flags & (C_POLL | C_WAIT)) == (C_POLL | C_WAIT)) {
while (chp->ch_queue->queue_active > 0 ||
SIMPLEQ_FIRST(&chp->ch_queue->queue_xfer) != xfer) {
xfer->c_flags |= C_WAITACT;
cv_wait(&chp->ch_queue->c_active, &chp->ch_lock);
xfer->c_flags &= ~C_WAITACT;
}
/*
* Free xfer now if it there was attempt to free it
* while we were waiting.
*/
if ((xfer->c_flags & (C_FREE|C_WAITTIMO)) == C_FREE) {
ata_channel_unlock(chp);
ata_free_xfer(chp, xfer);
return;
}
}
ata_channel_unlock(chp);
ATADEBUG_PRINT(("atastart from ata_exec_xfer, flags 0x%x\n",
chp->ch_flags), DEBUG_XFERS);
atastart(chp);
}
/*
* Start I/O on a controller, for the given channel.
* The first xfer may be not for our channel if the channel queues
* are shared.
*
* MUST BE CALLED AT splbio()!
*
* XXX FIS-based switching with PMP
* Currently atastart() never schedules concurrent NCQ transfers to more than
* one drive, even when channel has several SATA drives attached via PMP.
* To support concurrent transfers to different drives with PMP, it would be
* necessary to implement FIS-based switching support in controller driver,
* and then adjust error handling and recovery to stop assuming at most
* one active drive.
*/
void
atastart(struct ata_channel *chp)
{
struct atac_softc *atac = chp->ch_atac;
struct ata_queue *chq = chp->ch_queue;
struct ata_xfer *xfer, *axfer;
bool skipq;
#ifdef ATA_DEBUG
int spl1, spl2;
spl1 = splbio();
spl2 = splbio();
if (spl2 != spl1) {
printf("atastart: not at splbio()\n");
panic("atastart");
}
splx(spl2);
splx(spl1);
#endif /* ATA_DEBUG */
ata_channel_lock(chp);
again:
/* is there a xfer ? */
if ((xfer = SIMPLEQ_FIRST(&chp->ch_queue->queue_xfer)) == NULL) {
ATADEBUG_PRINT(("%s(chp=%p): channel %d queue_xfer is empty\n",
__func__, chp, chp->ch_channel), DEBUG_XFERS);
goto out;
}
/*
* if someone is waiting for the command to be active, wake it up
* and let it process the command
*/
if (__predict_false(xfer->c_flags & C_WAITACT)) {
ATADEBUG_PRINT(("atastart: xfer %p channel %d drive %d "
"wait active\n", xfer, chp->ch_channel, xfer->c_drive),
DEBUG_XFERS);
cv_broadcast(&chp->ch_queue->c_active);
goto out;
}
skipq = ISSET(xfer->c_flags, C_SKIP_QUEUE);
/* is the queue frozen? */
if (__predict_false(!skipq && chq->queue_freeze > 0)) {
if (chq->queue_flags & QF_IDLE_WAIT) {
chq->queue_flags &= ~QF_IDLE_WAIT;
cv_signal(&chp->ch_queue->queue_idle);
}
ATADEBUG_PRINT(("%s(chp=%p): channel %d drive %d "
"queue frozen: %d\n",
__func__, chp, chp->ch_channel, xfer->c_drive,
chq->queue_freeze),
DEBUG_XFERS);
goto out;
}
/* all xfers on same queue must belong to the same channel */
KASSERT(xfer->c_chp == chp);
/*
* Can only take the command if there are no current active
* commands, or if the command is NCQ and the active commands are also
* NCQ. If PM is in use and HBA driver doesn't support/use FIS-based
* switching, can only send commands to single drive.
* Need only check first xfer.
* XXX FIS-based switching - revisit
*/
if (!skipq && (axfer = TAILQ_FIRST(&chp->ch_queue->active_xfers))) {
if (!ISSET(xfer->c_flags, C_NCQ) ||
!ISSET(axfer->c_flags, C_NCQ) ||
xfer->c_drive != axfer->c_drive)
goto out;
}
struct ata_drive_datas * const drvp = &chp->ch_drive[xfer->c_drive];
/*
* Are we on limit of active xfers ? If the queue has more
* than 1 openings, we keep one slot reserved for recovery or dump.
*/
KASSERT(chq->queue_active <= chq->queue_openings);
const uint8_t chq_openings = (!skipq && chq->queue_openings > 1)
? (chq->queue_openings - 1) : chq->queue_openings;
const uint8_t drv_openings = ISSET(xfer->c_flags, C_NCQ)
? drvp->drv_openings : ATA_MAX_OPENINGS;
if (chq->queue_active >= MIN(chq_openings, drv_openings)) {
if (skipq) {
panic("%s: channel %d busy, xfer not possible",
__func__, chp->ch_channel);
}
ATADEBUG_PRINT(("%s(chp=%p): channel %d completely busy\n",
__func__, chp, chp->ch_channel), DEBUG_XFERS);
goto out;
}
/* Slot allocation can fail if drv_openings < ch_openings */
if (!ata_queue_alloc_slot(chp, &xfer->c_slot, drv_openings))
goto out;
if (__predict_false(atac->atac_claim_hw)) {
if (!atac->atac_claim_hw(chp, 0)) {
ata_queue_free_slot(chp, xfer->c_slot);
goto out;
}
}
/* Now committed to start the xfer */
ATADEBUG_PRINT(("%s(chp=%p): xfer %p channel %d drive %d\n",
__func__, chp, xfer, chp->ch_channel, xfer->c_drive), DEBUG_XFERS);
if (drvp->drive_flags & ATA_DRIVE_RESET) {
drvp->drive_flags &= ~ATA_DRIVE_RESET;
drvp->state = 0;
}
if (ISSET(xfer->c_flags, C_NCQ))
SET(chp->ch_flags, ATACH_NCQ);
else
CLR(chp->ch_flags, ATACH_NCQ);
SIMPLEQ_REMOVE_HEAD(&chq->queue_xfer, c_xferchain);
ata_activate_xfer_locked(chp, xfer);
if (atac->atac_cap & ATAC_CAP_NOIRQ)
KASSERT(xfer->c_flags & C_POLL);
switch (ata_xfer_start(xfer)) {
case ATASTART_TH:
case ATASTART_ABORT:
/* don't start any further commands in this case */
goto out;
default:
/* nothing to do */
break;
}
/* Queue more commands if possible, but not during recovery or dump */
if (!skipq && chq->queue_active < chq->queue_openings)
goto again;
out:
ata_channel_unlock(chp);
}
int
ata_xfer_start(struct ata_xfer *xfer)
{
struct ata_channel *chp = xfer->c_chp;
int rv;
KASSERT(mutex_owned(&chp->ch_lock));
rv = xfer->ops->c_start(chp, xfer);
switch (rv) {
case ATASTART_STARTED:
/* nothing to do */
break;
case ATASTART_TH:
/* postpone xfer to thread */
ata_thread_wake_locked(chp);
break;
case ATASTART_POLL:
/* can happen even in thread context for some ATAPI devices */
ata_channel_unlock(chp);
KASSERT(xfer->ops != NULL && xfer->ops->c_poll != NULL);
xfer->ops->c_poll(chp, xfer);
ata_channel_lock(chp);
break;
case ATASTART_ABORT:
ata_channel_unlock(chp);
KASSERT(xfer->ops != NULL && xfer->ops->c_abort != NULL);
xfer->ops->c_abort(chp, xfer);
ata_channel_lock(chp);
break;
}
return rv;
}
static void
ata_activate_xfer_locked(struct ata_channel *chp, struct ata_xfer *xfer)
{
struct ata_queue * const chq = chp->ch_queue;
KASSERT(mutex_owned(&chp->ch_lock));
KASSERT((chq->active_xfers_used & __BIT(xfer->c_slot)) == 0);
if ((xfer->c_flags & C_SKIP_QUEUE) == 0)
TAILQ_INSERT_TAIL(&chq->active_xfers, xfer, c_activechain);
else {
/*
* Must go to head, so that ata_queue_get_active_xfer()
* returns the recovery command, and not some other
* random active transfer.
*/
TAILQ_INSERT_HEAD(&chq->active_xfers, xfer, c_activechain);
}
chq->active_xfers_used |= __BIT(xfer->c_slot);
chq->queue_active++;
}
/*
* Does it's own locking, does not require splbio().
* flags - whether to block waiting for free xfer
*/
struct ata_xfer *
ata_get_xfer(struct ata_channel *chp, bool waitok)
{
struct ata_xfer *xfer;
xfer = pool_get(&ata_xfer_pool, waitok ? PR_WAITOK : PR_NOWAIT);
KASSERT(!waitok || xfer != NULL);
if (xfer != NULL) {
/* zero everything */
memset(xfer, 0, sizeof(*xfer));
}
return xfer;
}
/*
* ata_deactivate_xfer() must be always called prior to ata_free_xfer()
*/
void
ata_free_xfer(struct ata_channel *chp, struct ata_xfer *xfer)
{
struct ata_queue *chq = chp->ch_queue;
ata_channel_lock(chp);
if (__predict_false(xfer->c_flags & (C_WAITACT|C_WAITTIMO))) {
/* Someone is waiting for this xfer, so we can't free now */
xfer->c_flags |= C_FREE;
cv_broadcast(&chq->c_active);
ata_channel_unlock(chp);
return;
}
/* XXX move PIOBM and free_gw to deactivate? */
#if NATA_PIOBM /* XXX wdc dependent code */
if (__predict_false(xfer->c_flags & C_PIOBM)) {
struct wdc_softc *wdc = CHAN_TO_WDC(chp);
/* finish the busmastering PIO */
(*wdc->piobm_done)(wdc->dma_arg,
chp->ch_channel, xfer->c_drive);
chp->ch_flags &= ~(ATACH_DMA_WAIT | ATACH_PIOBM_WAIT | ATACH_IRQ_WAIT);
}
#endif
if (__predict_false(chp->ch_atac->atac_free_hw))
chp->ch_atac->atac_free_hw(chp);
ata_channel_unlock(chp);
if (__predict_true(!ISSET(xfer->c_flags, C_PRIVATE_ALLOC)))
pool_put(&ata_xfer_pool, xfer);
}
void
ata_deactivate_xfer(struct ata_channel *chp, struct ata_xfer *xfer)
{
struct ata_queue * const chq = chp->ch_queue;
ata_channel_lock(chp);
KASSERT(chq->queue_active > 0);
KASSERT((chq->active_xfers_used & __BIT(xfer->c_slot)) != 0);
/* Stop only when this is last active xfer */
if (chq->queue_active == 1)
callout_stop(&chp->c_timo_callout);
if (callout_invoking(&chp->c_timo_callout))
xfer->c_flags |= C_WAITTIMO;
TAILQ_REMOVE(&chq->active_xfers, xfer, c_activechain);
chq->active_xfers_used &= ~__BIT(xfer->c_slot);
chq->queue_active--;
ata_queue_free_slot(chp, xfer->c_slot);
if (xfer->c_flags & C_WAIT)
cv_broadcast(&chq->c_cmd_finish);
ata_channel_unlock(chp);
}
/*
* Called in c_intr hook. Must be called before before any deactivations
* are done - if there is drain pending, it calls c_kill_xfer hook which
* deactivates the xfer.
* Calls c_kill_xfer with channel lock free.
* Returns true if caller should just exit without further processing.
* Caller must not further access any part of xfer or any related controller
* structures in that case, it should just return.
*/
bool
ata_waitdrain_xfer_check(struct ata_channel *chp, struct ata_xfer *xfer)
{
int drive = xfer->c_drive;
bool draining = false;
ata_channel_lock(chp);
if (chp->ch_drive[drive].drive_flags & ATA_DRIVE_WAITDRAIN) {
ata_channel_unlock(chp);
xfer->ops->c_kill_xfer(chp, xfer, KILL_GONE);
ata_channel_lock(chp);
chp->ch_drive[drive].drive_flags &= ~ATA_DRIVE_WAITDRAIN;
cv_signal(&chp->ch_queue->queue_drain);
draining = true;
}
ata_channel_unlock(chp);
return draining;
}
/*
* Check for race of normal transfer handling vs. timeout.
*/
bool
ata_timo_xfer_check(struct ata_xfer *xfer)
{
struct ata_channel *chp = xfer->c_chp;
struct ata_drive_datas *drvp = &chp->ch_drive[xfer->c_drive];
ata_channel_lock(chp);
if (xfer->c_flags & C_WAITTIMO) {
xfer->c_flags &= ~C_WAITTIMO;
/* Handle race vs. ata_free_xfer() */
if (xfer->c_flags & C_FREE) {
xfer->c_flags &= ~C_FREE;
ata_channel_unlock(chp);
device_printf(drvp->drv_softc,
"xfer %"PRIxPTR" freed while invoking timeout\n",
(intptr_t)xfer & PAGE_MASK);
ata_free_xfer(chp, xfer);
return true;
}
/* Race vs. callout_stop() in ata_deactivate_xfer() */
ata_channel_unlock(chp);
device_printf(drvp->drv_softc,
"xfer %"PRIxPTR" deactivated while invoking timeout\n",
(intptr_t)xfer & PAGE_MASK);
return true;
}
ata_channel_unlock(chp);
/* No race, proceed with timeout handling */
return false;
}
/*
* Kill off all active xfers for a ata_channel.
*
* Must be called with channel lock held.
*/
void
ata_kill_active(struct ata_channel *chp, int reason, int flags)
{
struct ata_queue * const chq = chp->ch_queue;
struct ata_xfer *xfer, *xfernext;
KASSERT(mutex_owned(&chp->ch_lock));
TAILQ_FOREACH_SAFE(xfer, &chq->active_xfers, c_activechain, xfernext) {
ata_channel_unlock(chp);
xfer->ops->c_kill_xfer(xfer->c_chp, xfer, reason);
ata_channel_lock(chp);
}
}
/*
* Kill off all pending xfers for a drive.
*/
void
ata_kill_pending(struct ata_drive_datas *drvp)
{
struct ata_channel * const chp = drvp->chnl_softc;
struct ata_queue * const chq = chp->ch_queue;
struct ata_xfer *xfer;
ata_channel_lock(chp);
/* Kill all pending transfers */
while ((xfer = SIMPLEQ_FIRST(&chq->queue_xfer))) {
KASSERT(xfer->c_chp == chp);
if (xfer->c_drive != drvp->drive)
continue;
SIMPLEQ_REMOVE_HEAD(&chp->ch_queue->queue_xfer, c_xferchain);
/*
* Keep the lock, so that we get deadlock (and 'locking against
* myself' with LOCKDEBUG), instead of silent
* data corruption, if the hook tries to call back into
* middle layer for inactive xfer.
*/
xfer->ops->c_kill_xfer(chp, xfer, KILL_GONE_INACTIVE);
}
/* Wait until all active transfers on the drive finish */
while (chq->queue_active > 0) {
bool drv_active = false;
TAILQ_FOREACH(xfer, &chq->active_xfers, c_activechain) {
KASSERT(xfer->c_chp == chp);
if (xfer->c_drive == drvp->drive) {
drv_active = true;
break;
}
}
if (!drv_active) {
/* all finished */
break;
}
drvp->drive_flags |= ATA_DRIVE_WAITDRAIN;
cv_wait(&chq->queue_drain, &chp->ch_lock);
}
ata_channel_unlock(chp);
}
static void
ata_channel_freeze_locked(struct ata_channel *chp)
{
chp->ch_queue->queue_freeze++;
ATADEBUG_PRINT(("%s(chp=%p) -> %d\n", __func__, chp,
chp->ch_queue->queue_freeze), DEBUG_FUNCS | DEBUG_XFERS);
}
void
ata_channel_freeze(struct ata_channel *chp)
{
ata_channel_lock(chp);
ata_channel_freeze_locked(chp);
ata_channel_unlock(chp);
}
void
ata_channel_thaw_locked(struct ata_channel *chp)
{
KASSERT(mutex_owned(&chp->ch_lock));
KASSERT(chp->ch_queue->queue_freeze > 0);
chp->ch_queue->queue_freeze--;
ATADEBUG_PRINT(("%s(chp=%p) -> %d\n", __func__, chp,
chp->ch_queue->queue_freeze), DEBUG_FUNCS | DEBUG_XFERS);
}
/*
* ata_thread_run:
*
* Reset and ATA channel. Channel lock must be held. arg is type-specific.
*/
void
ata_thread_run(struct ata_channel *chp, int flags, int type, int arg)
{
struct atac_softc *atac = chp->ch_atac;
bool threset = false;
struct ata_drive_datas *drvp;
ata_channel_lock_owned(chp);
/*
* If we can poll or wait it's OK, otherwise wake up the
* kernel thread to do it for us.
*/
ATADEBUG_PRINT(("%s flags 0x%x ch_flags 0x%x\n",
__func__, flags, chp->ch_flags), DEBUG_FUNCS | DEBUG_XFERS);
if ((flags & (AT_POLL | AT_WAIT)) == 0) {
switch (type) {
case ATACH_TH_RESET:
if (chp->ch_flags & ATACH_TH_RESET) {
/* No need to schedule another reset */
return;
}
break;
case ATACH_TH_DRIVE_RESET:
{
int drive = arg;
KASSERT(drive <= chp->ch_ndrives);
drvp = &chp->ch_drive[drive];
if (drvp->drive_flags & ATA_DRIVE_TH_RESET) {
/* No need to schedule another reset */
return;
}
drvp->drive_flags |= ATA_DRIVE_TH_RESET;
break;
}
case ATACH_TH_RECOVERY:
{
uint32_t tfd = (uint32_t)arg;
KASSERT((chp->ch_flags & ATACH_RECOVERING) == 0);
chp->recovery_tfd = tfd;
break;
}
default:
panic("%s: unknown type: %x", __func__, type);
/* NOTREACHED */
}
/*
* Block execution of other commands while reset is scheduled
* to a thread.
*/
ata_channel_freeze_locked(chp);
chp->ch_flags |= type;
cv_signal(&chp->ch_thr_idle);
return;
}
/* Block execution of other commands during reset */
ata_channel_freeze_locked(chp);
/*
* If reset has been scheduled to a thread, then clear
* the flag now so that the thread won't try to execute it if
* we happen to sleep, and thaw one more time after the reset.
*/
if (chp->ch_flags & type) {
chp->ch_flags &= ~type;
threset = true;
}
switch (type) {
case ATACH_TH_RESET:
(*atac->atac_bustype_ata->ata_reset_channel)(chp, flags);
KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL);
for (int drive = 0; drive < chp->ch_ndrives; drive++)
chp->ch_drive[drive].state = 0;
break;
case ATACH_TH_DRIVE_RESET:
{
int drive = arg;
KASSERT(drive <= chp->ch_ndrives);
drvp = &chp->ch_drive[drive];
(*atac->atac_bustype_ata->ata_reset_drive)(drvp, flags, NULL);
drvp->state = 0;
break;
}
case ATACH_TH_RECOVERY:
{
uint32_t tfd = (uint32_t)arg;
KASSERT((chp->ch_flags & ATACH_RECOVERING) == 0);
KASSERT(atac->atac_bustype_ata->ata_recovery != NULL);
SET(chp->ch_flags, ATACH_RECOVERING);
(*atac->atac_bustype_ata->ata_recovery)(chp, flags, tfd);
CLR(chp->ch_flags, ATACH_RECOVERING);
break;
}
default:
panic("%s: unknown type: %x", __func__, type);
/* NOTREACHED */
}
/*
* Thaw one extra time to clear the freeze done when the reset has
* been scheduled to the thread.
*/
if (threset)
ata_channel_thaw_locked(chp);
/* Allow commands to run again */
ata_channel_thaw_locked(chp);
/* Signal the thread in case there is an xfer to run */
cv_signal(&chp->ch_thr_idle);
}
int
ata_addref(struct ata_channel *chp)
{
struct atac_softc *atac = chp->ch_atac;
struct scsipi_adapter *adapt = &atac->atac_atapi_adapter._generic;
int s, error = 0;
s = splbio();
if (adapt->adapt_refcnt++ == 0 &&
adapt->adapt_enable != NULL) {
error = (*adapt->adapt_enable)(atac->atac_dev, 1);
if (error)
adapt->adapt_refcnt--;
}
splx(s);
return (error);
}
void
ata_delref(struct ata_channel *chp)
{
struct atac_softc *atac = chp->ch_atac;
struct scsipi_adapter *adapt = &atac->atac_atapi_adapter._generic;
int s;
s = splbio();
if (adapt->adapt_refcnt-- == 1 &&
adapt->adapt_enable != NULL)
(void) (*adapt->adapt_enable)(atac->atac_dev, 0);
splx(s);
}
void
ata_print_modes(struct ata_channel *chp)
{
struct atac_softc *atac = chp->ch_atac;
int drive;
struct ata_drive_datas *drvp;
KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL);
for (drive = 0; drive < chp->ch_ndrives; drive++) {
drvp = &chp->ch_drive[drive];
if (drvp->drive_type == ATA_DRIVET_NONE ||
drvp->drv_softc == NULL)
continue;
aprint_verbose("%s(%s:%d:%d): using PIO mode %d",
device_xname(drvp->drv_softc),
device_xname(atac->atac_dev),
chp->ch_channel, drvp->drive, drvp->PIO_mode);
#if NATA_DMA
if (drvp->drive_flags & ATA_DRIVE_DMA)
aprint_verbose(", DMA mode %d", drvp->DMA_mode);
#if NATA_UDMA
if (drvp->drive_flags & ATA_DRIVE_UDMA) {
aprint_verbose(", Ultra-DMA mode %d", drvp->UDMA_mode);
if (drvp->UDMA_mode == 2)
aprint_verbose(" (Ultra/33)");
else if (drvp->UDMA_mode == 4)
aprint_verbose(" (Ultra/66)");
else if (drvp->UDMA_mode == 5)
aprint_verbose(" (Ultra/100)");
else if (drvp->UDMA_mode == 6)
aprint_verbose(" (Ultra/133)");
}
#endif /* NATA_UDMA */
#endif /* NATA_DMA */
#if NATA_DMA || NATA_PIOBM
if (0
#if NATA_DMA
|| (drvp->drive_flags & (ATA_DRIVE_DMA | ATA_DRIVE_UDMA))
#endif
#if NATA_PIOBM
/* PIOBM capable controllers use DMA for PIO commands */
|| (atac->atac_cap & ATAC_CAP_PIOBM)
#endif
)
aprint_verbose(" (using DMA)");
if (drvp->drive_flags & ATA_DRIVE_NCQ) {
aprint_verbose(", NCQ (%d tags)%s",
ATA_REAL_OPENINGS(chp->ch_queue->queue_openings),
(drvp->drive_flags & ATA_DRIVE_NCQ_PRIO)
? " w/PRIO" : "");
} else if (drvp->drive_flags & ATA_DRIVE_WFUA)
aprint_verbose(", WRITE DMA FUA EXT");
#endif /* NATA_DMA || NATA_PIOBM */
aprint_verbose("\n");
}
}
#if NATA_DMA
/*
* downgrade the transfer mode of a drive after an error. return 1 if
* downgrade was possible, 0 otherwise.
*
* MUST BE CALLED AT splbio()!
*/
int
ata_downgrade_mode(struct ata_drive_datas *drvp, int flags)
{
struct ata_channel *chp = drvp->chnl_softc;
struct atac_softc *atac = chp->ch_atac;
device_t drv_dev = drvp->drv_softc;
int cf_flags = device_cfdata(drv_dev)->cf_flags;
ata_channel_lock_owned(drvp->chnl_softc);
/* if drive or controller don't know its mode, we can't do much */
if ((drvp->drive_flags & ATA_DRIVE_MODE) == 0 ||
(atac->atac_set_modes == NULL))
return 0;
/* current drive mode was set by a config flag, let it this way */
if ((cf_flags & ATA_CONFIG_PIO_SET) ||
(cf_flags & ATA_CONFIG_DMA_SET) ||
(cf_flags & ATA_CONFIG_UDMA_SET))
return 0;
#if NATA_UDMA
/*
* If we were using Ultra-DMA mode, downgrade to the next lower mode.
*/
if ((drvp->drive_flags & ATA_DRIVE_UDMA) && drvp->UDMA_mode >= 2) {
drvp->UDMA_mode--;
aprint_error_dev(drv_dev,
"transfer error, downgrading to Ultra-DMA mode %d\n",
drvp->UDMA_mode);
}
#endif
/*
* If we were using ultra-DMA, don't downgrade to multiword DMA.
*/
else if (drvp->drive_flags & (ATA_DRIVE_DMA | ATA_DRIVE_UDMA)) {
drvp->drive_flags &= ~(ATA_DRIVE_DMA | ATA_DRIVE_UDMA);
drvp->PIO_mode = drvp->PIO_cap;
aprint_error_dev(drv_dev,
"transfer error, downgrading to PIO mode %d\n",
drvp->PIO_mode);
} else /* already using PIO, can't downgrade */
return 0;
(*atac->atac_set_modes)(chp);
ata_print_modes(chp);
/* reset the channel, which will schedule all drives for setup */
ata_thread_run(chp, flags, ATACH_TH_RESET, ATACH_NODRIVE);
return 1;
}
#endif /* NATA_DMA */
/*
* Probe drive's capabilities, for use by the controller later
* Assumes drvp points to an existing drive.
*/
void
ata_probe_caps(struct ata_drive_datas *drvp)
{
struct ataparams params, params2;
struct ata_channel *chp = drvp->chnl_softc;
struct atac_softc *atac = chp->ch_atac;
device_t drv_dev = drvp->drv_softc;
int i, printed = 0;
const char *sep = "";
int cf_flags;
if (ata_get_params(drvp, AT_WAIT, &params) != CMD_OK) {
/* IDENTIFY failed. Can't tell more about the device */
return;
}
if ((atac->atac_cap & (ATAC_CAP_DATA16 | ATAC_CAP_DATA32)) ==
(ATAC_CAP_DATA16 | ATAC_CAP_DATA32)) {
/*
* Controller claims 16 and 32 bit transfers.
* Re-do an IDENTIFY with 32-bit transfers,
* and compare results.
*/
ata_channel_lock(chp);
drvp->drive_flags |= ATA_DRIVE_CAP32;
ata_channel_unlock(chp);
ata_get_params(drvp, AT_WAIT, &params2);
if (memcmp(&params, &params2, sizeof(struct ataparams)) != 0) {
/* Not good. fall back to 16bits */
ata_channel_lock(chp);
drvp->drive_flags &= ~ATA_DRIVE_CAP32;
ata_channel_unlock(chp);
} else {
aprint_verbose_dev(drv_dev, "32-bit data port\n");
}
}
#if 0 /* Some ultra-DMA drives claims to only support ATA-3. sigh */
if (params.atap_ata_major > 0x01 &&
params.atap_ata_major != 0xffff) {
for (i = 14; i > 0; i--) {
if (params.atap_ata_major & (1 << i)) {
aprint_verbose_dev(drv_dev,
"ATA version %d\n", i);
drvp->ata_vers = i;
break;
}
}
}
#endif
/* An ATAPI device is at last PIO mode 3 */
if (drvp->drive_type == ATA_DRIVET_ATAPI)
drvp->PIO_mode = 3;
/*
* It's not in the specs, but it seems that some drive
* returns 0xffff in atap_extensions when this field is invalid
*/
if (params.atap_extensions != 0xffff &&
(params.atap_extensions & WDC_EXT_MODES)) {
/*
* XXX some drives report something wrong here (they claim to
* support PIO mode 8 !). As mode is coded on 3 bits in
* SET FEATURE, limit it to 7 (so limit i to 4).
* If higher mode than 7 is found, abort.
*/
for (i = 7; i >= 0; i--) {
if ((params.atap_piomode_supp & (1 << i)) == 0)
continue;
if (i > 4)
return;
/*
* See if mode is accepted.
* If the controller can't set its PIO mode,
* assume the defaults are good, so don't try
* to set it
*/
if (atac->atac_set_modes)
/*
* It's OK to pool here, it's fast enough
* to not bother waiting for interrupt
*/
if (ata_set_mode(drvp, 0x08 | (i + 3),
AT_WAIT) != CMD_OK)
continue;
if (!printed) {
aprint_verbose_dev(drv_dev,
"drive supports PIO mode %d", i + 3);
sep = ",";
printed = 1;
}
/*
* If controller's driver can't set its PIO mode,
* get the highter one for the drive.
*/
if (atac->atac_set_modes == NULL ||
atac->atac_pio_cap >= i + 3) {
drvp->PIO_mode = i + 3;
drvp->PIO_cap = i + 3;
break;
}
}
if (!printed) {
/*
* We didn't find a valid PIO mode.
* Assume the values returned for DMA are buggy too
*/
return;
}
ata_channel_lock(chp);
drvp->drive_flags |= ATA_DRIVE_MODE;
ata_channel_unlock(chp);
printed = 0;
for (i = 7; i >= 0; i--) {
if ((params.atap_dmamode_supp & (1 << i)) == 0)
continue;
#if NATA_DMA
if ((atac->atac_cap & ATAC_CAP_DMA) &&
atac->atac_set_modes != NULL)
if (ata_set_mode(drvp, 0x20 | i, AT_WAIT)
!= CMD_OK)
continue;
#endif
if (!printed) {
aprint_verbose("%s DMA mode %d", sep, i);
sep = ",";
printed = 1;
}
#if NATA_DMA
if (atac->atac_cap & ATAC_CAP_DMA) {
if (atac->atac_set_modes != NULL &&
atac->atac_dma_cap < i)
continue;
drvp->DMA_mode = i;
drvp->DMA_cap = i;
ata_channel_lock(chp);
drvp->drive_flags |= ATA_DRIVE_DMA;
ata_channel_unlock(chp);
}
#endif
break;
}
if (params.atap_extensions & WDC_EXT_UDMA_MODES) {
printed = 0;
for (i = 7; i >= 0; i--) {
if ((params.atap_udmamode_supp & (1 << i))
== 0)
continue;
#if NATA_UDMA
if (atac->atac_set_modes != NULL &&
(atac->atac_cap & ATAC_CAP_UDMA))
if (ata_set_mode(drvp, 0x40 | i,
AT_WAIT) != CMD_OK)
continue;
#endif
if (!printed) {
aprint_verbose("%s Ultra-DMA mode %d",
sep, i);
if (i == 2)
aprint_verbose(" (Ultra/33)");
else if (i == 4)
aprint_verbose(" (Ultra/66)");
else if (i == 5)
aprint_verbose(" (Ultra/100)");
else if (i == 6)
aprint_verbose(" (Ultra/133)");
sep = ",";
printed = 1;
}
#if NATA_UDMA
if (atac->atac_cap & ATAC_CAP_UDMA) {
if (atac->atac_set_modes != NULL &&
atac->atac_udma_cap < i)
continue;
drvp->UDMA_mode = i;
drvp->UDMA_cap = i;
ata_channel_lock(chp);
drvp->drive_flags |= ATA_DRIVE_UDMA;
ata_channel_unlock(chp);
}
#endif
break;
}
}
}
ata_channel_lock(chp);
drvp->drive_flags &= ~ATA_DRIVE_NOSTREAM;
if (drvp->drive_type == ATA_DRIVET_ATAPI) {
if (atac->atac_cap & ATAC_CAP_ATAPI_NOSTREAM)
drvp->drive_flags |= ATA_DRIVE_NOSTREAM;
} else {
if (atac->atac_cap & ATAC_CAP_ATA_NOSTREAM)
drvp->drive_flags |= ATA_DRIVE_NOSTREAM;
}
ata_channel_unlock(chp);
/* Try to guess ATA version here, if it didn't get reported */
if (drvp->ata_vers == 0) {
#if NATA_UDMA
if (drvp->drive_flags & ATA_DRIVE_UDMA)
drvp->ata_vers = 4; /* should be at last ATA-4 */
else
#endif
if (drvp->PIO_cap > 2)
drvp->ata_vers = 2; /* should be at last ATA-2 */
}
cf_flags = device_cfdata(drv_dev)->cf_flags;
if (cf_flags & ATA_CONFIG_PIO_SET) {
ata_channel_lock(chp);
drvp->PIO_mode =
(cf_flags & ATA_CONFIG_PIO_MODES) >> ATA_CONFIG_PIO_OFF;
drvp->drive_flags |= ATA_DRIVE_MODE;
ata_channel_unlock(chp);
}
#if NATA_DMA
if ((atac->atac_cap & ATAC_CAP_DMA) == 0) {
/* don't care about DMA modes */
if (*sep != '\0')
aprint_verbose("\n");
return;
}
if (cf_flags & ATA_CONFIG_DMA_SET) {
ata_channel_lock(chp);
if ((cf_flags & ATA_CONFIG_DMA_MODES) ==
ATA_CONFIG_DMA_DISABLE) {
drvp->drive_flags &= ~ATA_DRIVE_DMA;
} else {
drvp->DMA_mode = (cf_flags & ATA_CONFIG_DMA_MODES) >>
ATA_CONFIG_DMA_OFF;
drvp->drive_flags |= ATA_DRIVE_DMA | ATA_DRIVE_MODE;
}
ata_channel_unlock(chp);
}
/*
* Probe WRITE DMA FUA EXT. Support is mandatory for devices
* supporting LBA48, but nevertheless confirm with the feature flag.
*/
if (drvp->drive_flags & ATA_DRIVE_DMA) {
if ((params.atap_cmd2_en & ATA_CMD2_LBA48) != 0
&& (params.atap_cmd_def & ATA_CMDE_WFE)) {
drvp->drive_flags |= ATA_DRIVE_WFUA;
aprint_verbose("%s WRITE DMA FUA", sep);
sep = ",";
}
}
/* Probe NCQ support - READ/WRITE FPDMA QUEUED command support */
ata_channel_lock(chp);
drvp->drv_openings = 1;
if (params.atap_sata_caps & SATA_NATIVE_CMDQ) {
if (atac->atac_cap & ATAC_CAP_NCQ)
drvp->drive_flags |= ATA_DRIVE_NCQ;
drvp->drv_openings =
(params.atap_queuedepth & WDC_QUEUE_DEPTH_MASK) + 1;
aprint_verbose("%s NCQ (%d tags)", sep, drvp->drv_openings);
sep = ",";
if (params.atap_sata_caps & SATA_NCQ_PRIO) {
drvp->drive_flags |= ATA_DRIVE_NCQ_PRIO;
aprint_verbose(" w/PRIO");
}
}
ata_channel_unlock(chp);
if (*sep != '\0')
aprint_verbose("\n");
#if NATA_UDMA
if ((atac->atac_cap & ATAC_CAP_UDMA) == 0) {
/* don't care about UDMA modes */
return;
}
if (cf_flags & ATA_CONFIG_UDMA_SET) {
ata_channel_lock(chp);
if ((cf_flags & ATA_CONFIG_UDMA_MODES) ==
ATA_CONFIG_UDMA_DISABLE) {
drvp->drive_flags &= ~ATA_DRIVE_UDMA;
} else {
drvp->UDMA_mode = (cf_flags & ATA_CONFIG_UDMA_MODES) >>
ATA_CONFIG_UDMA_OFF;
drvp->drive_flags |= ATA_DRIVE_UDMA | ATA_DRIVE_MODE;
}
ata_channel_unlock(chp);
}
#endif /* NATA_UDMA */
#endif /* NATA_DMA */
}
/* management of the /dev/atabus* devices */
int
atabusopen(dev_t dev, int flag, int fmt, struct lwp *l)
{
struct atabus_softc *sc;
int error;
sc = device_lookup_private(&atabus_cd, minor(dev));
if (sc == NULL)
return (ENXIO);
if (sc->sc_flags & ATABUSCF_OPEN)
return (EBUSY);
if ((error = ata_addref(sc->sc_chan)) != 0)
return (error);
sc->sc_flags |= ATABUSCF_OPEN;
return (0);
}
int
atabusclose(dev_t dev, int flag, int fmt, struct lwp *l)
{
struct atabus_softc *sc =
device_lookup_private(&atabus_cd, minor(dev));
ata_delref(sc->sc_chan);
sc->sc_flags &= ~ATABUSCF_OPEN;
return (0);
}
int
atabusioctl(dev_t dev, u_long cmd, void *addr, int flag, struct lwp *l)
{
struct atabus_softc *sc =
device_lookup_private(&atabus_cd, minor(dev));
struct ata_channel *chp = sc->sc_chan;
int min_drive, max_drive, drive;
int error;
/*
* Enforce write permission for ioctls that change the
* state of the bus. Host adapter specific ioctls must
* be checked by the adapter driver.
*/
switch (cmd) {
case ATABUSIOSCAN:
case ATABUSIODETACH:
case ATABUSIORESET:
if ((flag & FWRITE) == 0)
return (EBADF);
}
switch (cmd) {
case ATABUSIORESET:
ata_channel_lock(chp);
ata_thread_run(sc->sc_chan, AT_WAIT | AT_POLL,
ATACH_TH_RESET, ATACH_NODRIVE);
ata_channel_unlock(chp);
return 0;
case ATABUSIOSCAN:
{
#if 0
struct atabusioscan_args *a=
(struct atabusioscan_args *)addr;
#endif
if ((chp->ch_drive[0].drive_type == ATA_DRIVET_OLD) ||
(chp->ch_drive[1].drive_type == ATA_DRIVET_OLD))
return (EOPNOTSUPP);
return (EOPNOTSUPP);
}
case ATABUSIODETACH:
{
struct atabusiodetach_args *a=
(struct atabusiodetach_args *)addr;
if ((chp->ch_drive[0].drive_type == ATA_DRIVET_OLD) ||
(chp->ch_drive[1].drive_type == ATA_DRIVET_OLD))
return (EOPNOTSUPP);
switch (a->at_dev) {
case -1:
min_drive = 0;
max_drive = 1;
break;
case 0:
case 1:
min_drive = max_drive = a->at_dev;
break;
default:
return (EINVAL);
}
for (drive = min_drive; drive <= max_drive; drive++) {
if (chp->ch_drive[drive].drv_softc != NULL) {
error = config_detach(
chp->ch_drive[drive].drv_softc, 0);
if (error)
return (error);
KASSERT(chp->ch_drive[drive].drv_softc == NULL);
}
}
return 0;
}
default:
return ENOTTY;
}
}
static bool
atabus_suspend(device_t dv, const pmf_qual_t *qual)
{
struct atabus_softc *sc = device_private(dv);
struct ata_channel *chp = sc->sc_chan;
ata_channel_idle(chp);
return true;
}
static bool
atabus_resume(device_t dv, const pmf_qual_t *qual)
{
struct atabus_softc *sc = device_private(dv);
struct ata_channel *chp = sc->sc_chan;
/*
* XXX joerg: with wdc, the first channel unfreezes the controler.
* Move this the reset and queue idling into wdc.
*/
ata_channel_lock(chp);
if (chp->ch_queue->queue_freeze == 0) {
ata_channel_unlock(chp);
goto out;
}
/* unfreeze the queue and reset drives */
ata_channel_thaw_locked(chp);
/* reset channel only if there are drives attached */
if (chp->ch_ndrives > 0)
ata_thread_run(chp, AT_WAIT, ATACH_TH_RESET, ATACH_NODRIVE);
ata_channel_unlock(chp);
out:
return true;
}
static int
atabus_rescan(device_t self, const char *ifattr, const int *locators)
{
struct atabus_softc *sc = device_private(self);
struct ata_channel *chp = sc->sc_chan;
struct atabus_initq *initq;
int i;
/*
* we can rescan a port multiplier atabus, even if some devices are
* still attached
*/
if (chp->ch_satapmp_nports == 0) {
if (chp->atapibus != NULL) {
return EBUSY;
}
KASSERT(chp->ch_ndrives == 0 || chp->ch_drive != NULL);
for (i = 0; i < chp->ch_ndrives; i++) {
if (chp->ch_drive[i].drv_softc != NULL) {
return EBUSY;
}
}
}
initq = kmem_zalloc(sizeof(*initq), KM_SLEEP);
initq->atabus_sc = sc;
mutex_enter(&atabus_qlock);
TAILQ_INSERT_TAIL(&atabus_initq_head, initq, atabus_initq);
mutex_exit(&atabus_qlock);
config_pending_incr(sc->sc_dev);
ata_channel_lock(chp);
chp->ch_flags |= ATACH_TH_RESCAN;
cv_signal(&chp->ch_thr_idle);
ata_channel_unlock(chp);
return 0;
}
void
ata_delay(struct ata_channel *chp, int ms, const char *msg, int flags)
{
KASSERT(mutex_owned(&chp->ch_lock));
if ((flags & (AT_WAIT | AT_POLL)) == AT_POLL) {
/*
* can't use kpause(), we may be in interrupt context
* or taking a crash dump
*/
delay(ms * 1000);
} else {
int pause = mstohz(ms);
kpause(msg, false, pause > 0 ? pause : 1, &chp->ch_lock);
}
}
void
atacmd_toncq(struct ata_xfer *xfer, uint8_t *cmd, uint16_t *count,
uint16_t *features, uint8_t *device)
{
if ((xfer->c_flags & C_NCQ) == 0) {
/* FUA handling for non-NCQ drives */
if (xfer->c_bio.flags & ATA_FUA
&& *cmd == WDCC_WRITEDMA_EXT)
*cmd = WDCC_WRITEDMA_FUA_EXT;
return;
}
*cmd = (xfer->c_bio.flags & ATA_READ) ?
WDCC_READ_FPDMA_QUEUED : WDCC_WRITE_FPDMA_QUEUED;
/* for FPDMA the block count is in features */
*features = *count;
/* NCQ tag */
*count = (xfer->c_slot << 3);
if (xfer->c_bio.flags & ATA_PRIO_HIGH)
*count |= WDSC_PRIO_HIGH;
/* other device flags */
if (xfer->c_bio.flags & ATA_FUA)
*device |= WDSD_FUA;
}
void
ata_wait_cmd(struct ata_channel *chp, struct ata_xfer *xfer)
{
struct ata_queue *chq = chp->ch_queue;
struct ata_command *ata_c = &xfer->c_ata_c;
ata_channel_lock(chp);
while ((ata_c->flags & AT_DONE) == 0)
cv_wait(&chq->c_cmd_finish, &chp->ch_lock);
ata_channel_unlock(chp);
KASSERT((ata_c->flags & AT_DONE) != 0);
}
Reference in New Issue View Git Blame Copy Permalink