/* $NetBSD: dwlpx.c,v 1.23 2001/07/27 00:25:20 thorpej Exp $ */ /* * Copyright (c) 1997 by Matthew Jacob * NASA AMES Research Center. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice immediately at the beginning of the file, without modification, * this list of conditions, and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include /* RCS ID & Copyright macro defns */ __KERNEL_RCSID(0, "$NetBSD: dwlpx.c,v 1.23 2001/07/27 00:25:20 thorpej Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define KV(_addr) ((caddr_t)ALPHA_PHYS_TO_K0SEG((_addr))) #define DWLPX_SYSBASE(sc) \ ((((unsigned long)((sc)->dwlpx_node - 4)) << 36) | \ (((unsigned long) (sc)->dwlpx_hosenum) << 34) | \ (1LL << 39)) static int dwlpxmatch __P((struct device *, struct cfdata *, void *)); static void dwlpxattach __P((struct device *, struct device *, void *)); struct cfattach dwlpx_ca = { sizeof(struct dwlpx_softc), dwlpxmatch, dwlpxattach }; extern struct cfdriver dwlpx_cd; static int dwlpxprint __P((void *, const char *)); void dwlpx_errintr(void *, u_long vec); static int dwlpxprint(aux, pnp) void *aux; const char *pnp; { register struct pcibus_attach_args *pba = aux; /* only PCIs can attach to DWLPX's; easy. */ if (pnp) printf("%s at %s", pba->pba_busname, pnp); printf(" bus %d", pba->pba_bus); return (UNCONF); } static int dwlpxmatch(parent, cf, aux) struct device *parent; struct cfdata *cf; void *aux; { struct kft_dev_attach_args *ka = aux; if (strcmp(ka->ka_name, dwlpx_cd.cd_name) != 0) return (0); return (1); } static void dwlpxattach(parent, self, aux) struct device *parent; struct device *self; void *aux; { static int once = 0; struct dwlpx_softc *sc = (struct dwlpx_softc *)self; struct dwlpx_config *ccp = &sc->dwlpx_cc; struct kft_dev_attach_args *ka = aux; struct pcibus_attach_args pba; u_int32_t pcia_present; sc->dwlpx_node = ka->ka_node; sc->dwlpx_dtype = ka->ka_dtype; sc->dwlpx_hosenum = ka->ka_hosenum; dwlpx_init(sc); dwlpx_dma_init(ccp); pcia_present = REGVAL(PCIA_PRESENT + ccp->cc_sysbase); printf(": PCIA rev. %d, STD I/O %spresent, %dK S/G entries\n", (pcia_present >> PCIA_PRESENT_REVSHIFT) & PCIA_PRESENT_REVMASK, (pcia_present & PCIA_PRESENT_STDIO) == 0 ? "not " : "", sc->dwlpx_sgmapsz == DWLPX_SG128K ? 128 : 32); #if 0 { int hpc, slot, slotval; const char *str; for (hpc = 0; hpc < sc->dwlpx_nhpc; hpc++) { for (slot = 0; slot < 4; slot++) { slotval = (pcia_present >> PCIA_PRESENT_SLOTSHIFT(hpc, slot)) & PCIA_PRESENT_SLOT_MASK; if (slotval == PCIA_PRESENT_SLOT_NONE) continue; switch (slotval) { case PCIA_PRESENT_SLOT_25W: str = "25"; break; case PCIA_PRESENT_SLOT_15W: str = "15"; break; case PCIA_PRESENT_SLOW_7W: default: /* XXX gcc */ str = "7.5"; break; } printf("%s: hpc %d slot %d: %s watt module\n", sc->dwlpx_dev.dv_xname, hpc, slot, str); } } } #endif if (once == 0) { /* * Set up interrupts */ pci_kn8ae_pickintr(&sc->dwlpx_cc, 1); once++; } else { pci_kn8ae_pickintr(&sc->dwlpx_cc, 0); } /* * Attach PCI bus */ pba.pba_busname = "pci"; pba.pba_iot = &sc->dwlpx_cc.cc_iot; pba.pba_memt = &sc->dwlpx_cc.cc_memt; pba.pba_dmat = /* start with direct, may change... */ alphabus_dma_get_tag(&sc->dwlpx_cc.cc_dmat_direct, ALPHA_BUS_PCI); pba.pba_pc = &sc->dwlpx_cc.cc_pc; pba.pba_bus = 0; pba.pba_flags = PCI_FLAGS_IO_ENABLED | PCI_FLAGS_MEM_ENABLED | PCI_FLAGS_MRL_OKAY | PCI_FLAGS_MRM_OKAY | PCI_FLAGS_MWI_OKAY; config_found(self, &pba, dwlpxprint); } void dwlpx_init(sc) struct dwlpx_softc *sc; { u_int32_t ctl; struct dwlpx_config *ccp = &sc->dwlpx_cc; unsigned long vec, ls = DWLPX_SYSBASE(sc); int i; if (ccp->cc_initted == 0) { /* * On reads, you get a fault if you read a nonexisted HPC. * We know the internal KFTIA hose (hose 0) has only 2 HPCs, * but we can also actually probe for HPCs. * Assume at least one. */ for (sc->dwlpx_nhpc = 1; sc->dwlpx_nhpc < NHPC; sc->dwlpx_nhpc++) { if (badaddr(KV(PCIA_CTL(sc->dwlpx_nhpc) + ls), sizeof (ctl)) != 0) { break; } } if (sc->dwlpx_nhpc != NHPC) { /* clear (potential) Illegal CSR Address Error */ REGVAL(PCIA_ERR(0) + DWLPX_SYSBASE(sc)) = PCIA_ERR_ALLERR; } dwlpx_bus_io_init(&ccp->cc_iot, ccp); dwlpx_bus_mem_init(&ccp->cc_memt, ccp); } dwlpx_pci_init(&ccp->cc_pc, ccp); ccp->cc_sc = sc; /* * Establish a precalculated base for convenience's sake. */ ccp->cc_sysbase = ls; /* * If there are only 2 HPCs, then the 'present' register is not * implemented, so there will only ever be 32K SG entries. Otherwise * any revision greater than zero will have 128K entries. */ ctl = REGVAL(PCIA_PRESENT + ccp->cc_sysbase); if (sc->dwlpx_nhpc == 2) { sc->dwlpx_sgmapsz = DWLPX_SG32K; #if 0 /* * As of 2/25/98- When I enable SG128K, and then have to flip * TBIT below, I get bad SGRAM errors. We'll fix this later * if this gets important. */ } else if ((ctl >> PCIA_PRESENT_REVSHIFT) & PCIA_PRESENT_REVMASK) { sc->dwlpx_sgmapsz = DWLPX_SG128K; #endif } else { sc->dwlpx_sgmapsz = DWLPX_SG32K; } /* * Set up interrupt stuff for this DWLPX. * * Note that all PCI interrupt pins are disabled at this time. * * Do this even for all HPCs- even for the nonexistent * one on hose zero of a KFTIA. */ vec = scb_alloc(dwlpx_errintr, sc); if (vec == SCB_ALLOC_FAILED) panic("%s: unable to allocate error vector", sc->dwlpx_dev.dv_xname); printf("%s: error interrupt at vector 0x%lx\n", sc->dwlpx_dev.dv_xname, vec); for (i = 0; i < NHPC; i++) { REGVAL(PCIA_IMASK(i) + ccp->cc_sysbase) = DWLPX_IMASK_DFLT; REGVAL(PCIA_ERRVEC(i) + ccp->cc_sysbase) = vec; } /* * Establish HAE values, as well as make sure of sanity elsewhere. */ for (i = 0; i < sc->dwlpx_nhpc; i++) { ctl = REGVAL(PCIA_CTL(i) + ccp->cc_sysbase); ctl &= 0x0fffffff; ctl &= ~(PCIA_CTL_MHAE(0x1f) | PCIA_CTL_IHAE(0x1f)); /* * I originally also had it or'ing in 3, which makes no sense. */ ctl |= PCIA_CTL_RMMENA | PCIA_CTL_RMMARB; /* * Only valid if we're attached to a KFTIA or a KTHA. */ ctl |= PCIA_CTL_3UP; ctl |= PCIA_CTL_CUTENA; /* * Fit in appropriate S/G Map Ram size. */ if (sc->dwlpx_sgmapsz == DWLPX_SG32K) ctl |= PCIA_CTL_SG32K; else if (sc->dwlpx_sgmapsz == DWLPX_SG128K) ctl |= PCIA_CTL_SG128K; else ctl |= PCIA_CTL_SG32K; REGVAL(PCIA_CTL(i) + ccp->cc_sysbase) = ctl; } /* * Enable TBIT if required */ if (sc->dwlpx_sgmapsz == DWLPX_SG128K) REGVAL(PCIA_TBIT + ccp->cc_sysbase) = 1; alpha_mb(); ccp->cc_initted = 1; } void dwlpx_errintr(arg, vec) void *arg; unsigned long vec; { struct dwlpx_softc *sc = arg; struct dwlpx_config *ccp = &sc->dwlpx_cc; int i; struct { u_int32_t err; u_int32_t addr; } hpcs[NHPC]; for (i = 0; i < sc->dwlpx_nhpc; i++) { hpcs[i].err = REGVAL(PCIA_ERR(i) + ccp->cc_sysbase); hpcs[i].addr = REGVAL(PCIA_FADR(i) + ccp->cc_sysbase); } printf("%s: node %d hose %d error interrupt\n", sc->dwlpx_dev.dv_xname, sc->dwlpx_node, sc->dwlpx_hosenum); for (i = 0; i < sc->dwlpx_nhpc; i++) { if ((hpcs[i].err & PCIA_ERR_ERROR) == 0) continue; printf("\tHPC %d: ERR=0x%08x; DMA %s Memory, " "Failing Address 0x%x\n", i, hpcs[i].err, hpcs[i].addr & 0x1? "write to" : "read from", hpcs[i].addr & ~3); if (hpcs[i].err & PCIA_ERR_SERR_L) printf("\t PCI device asserted SERR_L\n"); if (hpcs[i].err & PCIA_ERR_ILAT) printf("\t Incremental Latency Exceeded\n"); if (hpcs[i].err & PCIA_ERR_SGPRTY) printf("\t CPU access of SG RAM Parity Error\n"); if (hpcs[i].err & PCIA_ERR_ILLCSR) printf("\t Illegal CSR Address Error\n"); if (hpcs[i].err & PCIA_ERR_PCINXM) printf("\t Nonexistent PCI Address Error\n"); if (hpcs[i].err & PCIA_ERR_DSCERR) printf("\t PCI Target Disconnect Error\n"); if (hpcs[i].err & PCIA_ERR_ABRT) printf("\t PCI Target Abort Error\n"); if (hpcs[i].err & PCIA_ERR_WPRTY) printf("\t PCI Write Parity Error\n"); if (hpcs[i].err & PCIA_ERR_DPERR) printf("\t PCI Data Parity Error\n"); if (hpcs[i].err & PCIA_ERR_APERR) printf("\t PCI Address Parity Error\n"); if (hpcs[i].err & PCIA_ERR_DFLT) printf("\t SG Map RAM Invalid Entry Error\n"); if (hpcs[i].err & PCIA_ERR_DPRTY) printf("\t DMA access of SG RAM Parity Error\n"); if (hpcs[i].err & PCIA_ERR_DRPERR) printf("\t DMA Read Return Parity Error\n"); if (hpcs[i].err & PCIA_ERR_MABRT) printf("\t PCI Master Abort Error\n"); if (hpcs[i].err & PCIA_ERR_CPRTY) printf("\t CSR Parity Error\n"); if (hpcs[i].err & PCIA_ERR_COVR) printf("\t CSR Overrun Error\n"); if (hpcs[i].err & PCIA_ERR_MBPERR) printf("\t Mailbox Parity Error\n"); if (hpcs[i].err & PCIA_ERR_MBILI) printf("\t Mailbox Illegal Length Error\n"); REGVAL(PCIA_ERR(i) + ccp->cc_sysbase) = hpcs[i].err; } }