/* $NetBSD: kern_clock.c,v 1.141 2020/05/08 22:10:09 ad Exp $ */ /*- * Copyright (c) 2000, 2004, 2006, 2007, 2008 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 1982, 1986, 1991, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)kern_clock.c 8.5 (Berkeley) 1/21/94 */ #include __KERNEL_RCSID(0, "$NetBSD: kern_clock.c,v 1.141 2020/05/08 22:10:09 ad Exp $"); #ifdef _KERNEL_OPT #include "opt_dtrace.h" #include "opt_gprof.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef GPROF #include #endif #ifdef KDTRACE_HOOKS #include #include cyclic_clock_func_t cyclic_clock_func[MAXCPUS]; #endif static int sysctl_kern_clockrate(SYSCTLFN_PROTO); /* * Clock handling routines. * * This code is written to operate with two timers that run independently of * each other. The main clock, running hz times per second, is used to keep * track of real time. The second timer handles kernel and user profiling, * and does resource use estimation. If the second timer is programmable, * it is randomized to avoid aliasing between the two clocks. For example, * the randomization prevents an adversary from always giving up the CPU * just before its quantum expires. Otherwise, it would never accumulate * CPU ticks. The mean frequency of the second timer is stathz. * * If no second timer exists, stathz will be zero; in this case we drive * profiling and statistics off the main clock. This WILL NOT be accurate; * do not do it unless absolutely necessary. * * The statistics clock may (or may not) be run at a higher rate while * profiling. This profile clock runs at profhz. We require that profhz * be an integral multiple of stathz. * * If the statistics clock is running fast, it must be divided by the ratio * profhz/stathz for statistics. (For profiling, every tick counts.) */ int stathz; int profhz; int profsrc; int schedhz; int profprocs; int hardclock_ticks; static int hardscheddiv; /* hard => sched divider (used if schedhz == 0) */ static int psdiv; /* prof => stat divider */ int psratio; /* ratio: prof / stat */ static u_int get_intr_timecount(struct timecounter *); static struct timecounter intr_timecounter = { .tc_get_timecount = get_intr_timecount, .tc_poll_pps = NULL, .tc_counter_mask = ~0u, .tc_frequency = 0, .tc_name = "clockinterrupt", /* quality - minimum implementation level for a clock */ .tc_quality = 0, .tc_priv = NULL, }; static u_int get_intr_timecount(struct timecounter *tc) { return (u_int)getticks(); } int getticks(void) { return atomic_load_relaxed(&hardclock_ticks); } /* * Initialize clock frequencies and start both clocks running. */ void initclocks(void) { static struct sysctllog *clog; int i; /* * Set divisors to 1 (normal case) and let the machine-specific * code do its bit. */ psdiv = 1; /* * provide minimum default time counter * will only run at interrupt resolution */ intr_timecounter.tc_frequency = hz; tc_init(&intr_timecounter); cpu_initclocks(); /* * Compute profhz and stathz, fix profhz if needed. */ i = stathz ? stathz : hz; if (profhz == 0) profhz = i; psratio = profhz / i; if (schedhz == 0) { /* 16Hz is best */ hardscheddiv = hz / 16; if (hardscheddiv <= 0) panic("hardscheddiv"); } sysctl_createv(&clog, 0, NULL, NULL, CTLFLAG_PERMANENT, CTLTYPE_STRUCT, "clockrate", SYSCTL_DESCR("Kernel clock rates"), sysctl_kern_clockrate, 0, NULL, sizeof(struct clockinfo), CTL_KERN, KERN_CLOCKRATE, CTL_EOL); sysctl_createv(&clog, 0, NULL, NULL, CTLFLAG_PERMANENT, CTLTYPE_INT, "hardclock_ticks", SYSCTL_DESCR("Number of hardclock ticks"), NULL, 0, &hardclock_ticks, sizeof(hardclock_ticks), CTL_KERN, KERN_HARDCLOCK_TICKS, CTL_EOL); } /* * The real-time timer, interrupting hz times per second. */ void hardclock(struct clockframe *frame) { struct lwp *l; struct cpu_info *ci; ci = curcpu(); l = ci->ci_onproc; timer_tick(l, CLKF_USERMODE(frame)); /* * If no separate statistics clock is available, run it from here. */ if (stathz == 0) statclock(frame); /* * If no separate schedclock is provided, call it here * at about 16 Hz. */ if (schedhz == 0) { if ((int)(--ci->ci_schedstate.spc_schedticks) <= 0) { schedclock(l); ci->ci_schedstate.spc_schedticks = hardscheddiv; } } if ((--ci->ci_schedstate.spc_ticks) <= 0) sched_tick(ci); if (CPU_IS_PRIMARY(ci)) { atomic_store_relaxed(&hardclock_ticks, atomic_load_relaxed(&hardclock_ticks) + 1); tc_ticktock(); } /* * Update real-time timeout queue. */ callout_hardclock(); } /* * Start profiling on a process. * * Kernel profiling passes proc0 which never exits and hence * keeps the profile clock running constantly. */ void startprofclock(struct proc *p) { KASSERT(mutex_owned(&p->p_stmutex)); if ((p->p_stflag & PST_PROFIL) == 0) { p->p_stflag |= PST_PROFIL; /* * This is only necessary if using the clock as the * profiling source. */ if (++profprocs == 1 && stathz != 0) psdiv = psratio; } } /* * Stop profiling on a process. */ void stopprofclock(struct proc *p) { KASSERT(mutex_owned(&p->p_stmutex)); if (p->p_stflag & PST_PROFIL) { p->p_stflag &= ~PST_PROFIL; /* * This is only necessary if using the clock as the * profiling source. */ if (--profprocs == 0 && stathz != 0) psdiv = 1; } } void schedclock(struct lwp *l) { if ((l->l_flag & LW_IDLE) != 0) return; sched_schedclock(l); } /* * Statistics clock. Grab profile sample, and if divider reaches 0, * do process and kernel statistics. */ void statclock(struct clockframe *frame) { #ifdef GPROF struct gmonparam *g; intptr_t i; #endif struct cpu_info *ci = curcpu(); struct schedstate_percpu *spc = &ci->ci_schedstate; struct proc *p; struct lwp *l; /* * Notice changes in divisor frequency, and adjust clock * frequency accordingly. */ if (spc->spc_psdiv != psdiv) { spc->spc_psdiv = psdiv; spc->spc_pscnt = psdiv; if (psdiv == 1) { setstatclockrate(stathz); } else { setstatclockrate(profhz); } } l = ci->ci_onproc; if ((l->l_flag & LW_IDLE) != 0) { /* * don't account idle lwps as swapper. */ p = NULL; } else { p = l->l_proc; mutex_spin_enter(&p->p_stmutex); } if (CLKF_USERMODE(frame)) { KASSERT(p != NULL); if ((p->p_stflag & PST_PROFIL) && profsrc == PROFSRC_CLOCK) addupc_intr(l, CLKF_PC(frame)); if (--spc->spc_pscnt > 0) { mutex_spin_exit(&p->p_stmutex); return; } /* * Came from user mode; CPU was in user state. * If this process is being profiled record the tick. */ p->p_uticks++; if (p->p_nice > NZERO) spc->spc_cp_time[CP_NICE]++; else spc->spc_cp_time[CP_USER]++; } else { #ifdef GPROF /* * Kernel statistics are just like addupc_intr, only easier. */ g = &_gmonparam; if (profsrc == PROFSRC_CLOCK && g->state == GMON_PROF_ON) { i = CLKF_PC(frame) - g->lowpc; if (i < g->textsize) { i /= HISTFRACTION * sizeof(*g->kcount); g->kcount[i]++; } } #endif #ifdef LWP_PC if (p != NULL && profsrc == PROFSRC_CLOCK && (p->p_stflag & PST_PROFIL)) { addupc_intr(l, LWP_PC(l)); } #endif if (--spc->spc_pscnt > 0) { if (p != NULL) mutex_spin_exit(&p->p_stmutex); return; } /* * Came from kernel mode, so we were: * - handling an interrupt, * - doing syscall or trap work on behalf of the current * user process, or * - spinning in the idle loop. * Whichever it is, charge the time as appropriate. * Note that we charge interrupts to the current process, * regardless of whether they are ``for'' that process, * so that we know how much of its real time was spent * in ``non-process'' (i.e., interrupt) work. */ if (CLKF_INTR(frame) || (curlwp->l_pflag & LP_INTR) != 0) { if (p != NULL) { p->p_iticks++; } spc->spc_cp_time[CP_INTR]++; } else if (p != NULL) { p->p_sticks++; spc->spc_cp_time[CP_SYS]++; } else { spc->spc_cp_time[CP_IDLE]++; } } spc->spc_pscnt = psdiv; if (p != NULL) { atomic_inc_uint(&l->l_cpticks); mutex_spin_exit(&p->p_stmutex); } #ifdef KDTRACE_HOOKS cyclic_clock_func_t func = cyclic_clock_func[cpu_index(ci)]; if (func) { (*func)((struct clockframe *)frame); } #endif } /* * sysctl helper routine for kern.clockrate. Assembles a struct on * the fly to be returned to the caller. */ static int sysctl_kern_clockrate(SYSCTLFN_ARGS) { struct clockinfo clkinfo; struct sysctlnode node; clkinfo.tick = tick; clkinfo.tickadj = tickadj; clkinfo.hz = hz; clkinfo.profhz = profhz; clkinfo.stathz = stathz ? stathz : hz; node = *rnode; node.sysctl_data = &clkinfo; return (sysctl_lookup(SYSCTLFN_CALL(&node))); }