/* $NetBSD: sbicvar.h,v 1.2 2003/08/07 16:26:30 agc Exp $ */ /* * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Van Jacobson of Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)scsivar.h 7.1 (Berkeley) 5/8/90 */ #ifndef _SBICVAR_H_ #define _SBICVAR_H_ #include #include /* * ACB. Holds additional information for each SCSI command Comments: We * need a separate scsi command block because we may need to overwrite it * with a request sense command. Basicly, we refrain from fiddling with * the scsi_xfer struct (except do the expected updating of return values). * We'll generally update: xs->{flags,resid,error,sense,status} and * occasionally xs->retries. */ struct sbic_acb { TAILQ_ENTRY(sbic_acb) chain; struct scsipi_xfer *xs; /* SCSI xfer ctrl block from above */ int flags; /* Status */ #define ACB_FREE 0x00 #define ACB_ACTIVE 0x01 #define ACB_DONE 0x02 #define ACB_DATAIN 0x04 /* DMA direction flag */ #define ACB_DMA 0x08 /* ACB using DMA this time */ struct scsi_generic cmd; /* SCSI command block */ int clen; bus_dmamap_t dmamap_xfer; /* Handle for dma */ u_char *data; /* Data buffer... */ int datalen; /* ... and its length. */ int offset; u_long sc_tcnt; /* number of bytes for this DMA */ }; /* * Some info about each (possible) target on the SCSI bus. This should * probably have been a "per target+lunit" structure, but we'll leave it at * this for now. Is there a way to reliably hook it up to sc->fordriver?? */ struct sbic_tinfo { int cmds; /* #commands processed */ int dconns; /* #disconnects */ int touts; /* #timeouts */ int perrs; /* #parity errors */ u_char* bounce; /* Bounce buffer for this device */ ushort lubusy; /* What local units/subr. are busy? */ u_char flags; u_char period; /* Period suggestion */ u_char offset; /* Offset suggestion */ } tinfo_t; struct sbic_softc { struct device sc_dev; /* struct isr sc_isr;*/ struct callout sc_timo_ch; struct target_sync { u_char state; u_char period; u_char offset; } sc_sync[8]; u_char target; /* Currently active target */ u_char lun; struct scsipi_channel sc_channel; struct scsipi_adapter sc_adapter; sbic_regmap sc_sbicp; /* Handle for the SBIC */ volatile void *sc_cregs; /* driver specific regs */ /* Lists of command blocks */ TAILQ_HEAD(acb_list, sbic_acb) free_list, ready_list, nexus_list; struct sbic_acb *sc_nexus; /* current command */ struct sbic_acb sc_acb[8]; /* the real command blocks */ struct sbic_tinfo sc_tinfo[8]; u_char sc_flags; u_char sc_scsiaddr; u_char sc_stat[2]; u_char sc_msg[7]; u_long sc_clkfreq; int sc_dmaflags; /* Target-specific busdma flags */ void *sc_dmah; /* Interface specific dma handle */ bus_dma_tag_t sc_dmat; /* Tag for dma accesses */ int sc_max_dmalen; /* Maximum DMA segment length */ int sc_dmamode; /* Machine-specific DMA mode for the SBIC chip */ u_short sc_dmatimo; /* dma timeout */ int (*sc_dmaok) (void *, bus_dma_tag_t, struct sbic_acb *); int (*sc_dmasetup) (void *, bus_dma_tag_t, struct sbic_acb *, int); int (*sc_dmanext) (void *, bus_dma_tag_t, struct sbic_acb *, int); void (*sc_dmastop) (void *, bus_dma_tag_t, struct sbic_acb *); void (*sc_dmafinish) (void *, bus_dma_tag_t, struct sbic_acb *); void (*sc_enintr) (struct sbic_softc *); }; /* sc_flags */ #define SBICF_ALIVE 0x01 /* controller initialized */ #define SBICF_SELECTED 0x02 /* bus is in selected state. */ #define SBICF_ICMD 0x04 /* Immediate command in execution */ #define SBICF_BADDMA 0x08 /* controller can only DMA to ztwobus space */ #define SBICF_NODMA 0x10 /* Don't use DMA */ #define SBICF_INTR 0x20 /* SBICF interrupt expected */ #define SBICF_INDMA 0x40 /* not used yet, DMA I/O in progress */ /* sync states */ #define SYNC_START 0 /* no sync handshake started */ #define SYNC_SENT 1 /* we sent sync request, no answer yet */ #define SYNC_DONE 2 /* target accepted our (or inferior) settings, or it rejected the request and we stay async */ #ifdef DEBUG #define DDB_FOLLOW 0x04 #define DDB_IO 0x08 #endif extern u_char sbic_inhibit_sync[8]; extern int sbic_no_dma; extern int sbic_clock_override; #define PHASE_MASK 0x07 /* mask for psns/pctl phase */ #define DATA_OUT_PHASE 0x00 #define DATA_IN_PHASE 0x01 #define CMD_PHASE 0x02 #define STATUS_PHASE 0x03 #define BUS_FREE_PHASE 0x04 #define ARB_SEL_PHASE 0x05 /* Fuji chip combines arbitration with sel. */ #define MESG_OUT_PHASE 0x06 #define MESG_IN_PHASE 0x07 #define MSG_CMD_COMPLETE 0x00 #define MSG_EXT_MESSAGE 0x01 #define MSG_SAVE_DATA_PTR 0x02 #define MSG_RESTORE_PTR 0x03 #define MSG_DISCONNECT 0x04 #define MSG_INIT_DETECT_ERROR 0x05 #define MSG_ABORT 0x06 #define MSG_REJECT 0x07 #define MSG_NOOP 0x08 #define MSG_PARITY_ERROR 0x09 #define MSG_BUS_DEVICE_RESET 0x0C #define MSG_IDENTIFY 0x80 #define MSG_IDENTIFY_DR 0xc0 /* (disconnect/reconnect allowed) */ #define MSG_SYNC_REQ 0x01 #define MSG_ISIDENTIFY(x) (x&MSG_IDENTIFY) #define IFY_TRN 0x20 #define IFY_LUNTRN(x) (x&0x07) #define IFY_LUN(x) (!(x&0x20)) /* Check if high bit set */ #define STS_CHECKCOND 0x02 /* Check Condition (ie., read sense) */ #define STS_CONDMET 0x04 /* Condition Met (ie., search worked) */ #define STS_BUSY 0x08 #define STS_INTERMED 0x10 /* Intermediate status sent */ #define STS_EXT 0x80 /* Extended status valid */ /* States returned by our state machine */ #define SBIC_STATE_ERROR -1 #define SBIC_STATE_DONE 0 #define SBIC_STATE_RUNNING 1 #define SBIC_STATE_DISCONNECT 2 /* * XXXX */ struct scsi_fmt_cdb { int len; /* cdb length (in bytes) */ u_char cdb[28]; /* cdb to use on next read/write */ }; struct buf; struct scsipi_xfer; void sbic_minphys (struct buf *bp); void sbic_scsi_request (struct scsipi_channel *, scsipi_adapter_req_t, void *); int sbicinit (struct sbic_softc *dev); int sbicintr (struct sbic_softc *); void sbic_dump (struct sbic_softc *dev); #endif /* _SBICVAR_H_ */