/* $NetBSD: mb89352reg.h,v 1.3 2003/08/07 16:31:02 agc Exp $ */ /* NecBSD: mb89352reg.h,v 1.3 1998/03/14 07:04:34 kmatsuda Exp */ /*- * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum, Masaru Oki and Kouichi Matsuda. * * This code is derived from software contributed to Berkeley by * Van Jacobson of Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)scsireg.h 8.1 (Berkeley) 6/10/93 */ /*- * Copyright (c) 1996,97,98,99 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum, Masaru Oki and Kouichi Matsuda. * * This code is derived from software contributed to Berkeley by * Van Jacobson of Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)scsireg.h 8.1 (Berkeley) 6/10/93 */ /* * [NetBSD for NEC PC-98 series] * Copyright (c) 1996, 1997, 1998 * NetBSD/pc98 porting staff. All rights reserved. * Copyright (c) 1996, 1997, 1998 * Kouichi Matsuda. All rights reserved. */ /* * FUJITSU MB89352A SCSI Protocol Controler Hardware Description. */ /* Definitions, most of them has turned out to be unneccesary, but here they * are anyway. */ #define BDID 0x00 /* Bus Device ID (R/W) */ #define SCTL 0x01 /* SPC Control register (R/W) */ #define SCMD 0x02 /* Command Register (R/W) */ #define TMOD 0x03 /* Transmit Mode Register (synch models) */ #define INTS 0x04 /* Interrupt sense (R); Interrupt Reset (W) */ #define PSNS 0x05 /* Phase Sence (R); SPC Diagnostic Control (W) */ #define SSTS 0x06 /* SPC status (R/O) */ #define SERR 0x07 /* SPC error status (R/O) */ #define PCTL 0x08 /* Phase Control (R/W) */ #define MBC 0x09 /* Modified Byte Counter (R/O) */ #define DREG 0x0a /* Data Register (R/W) */ #define TEMP 0x0b /* Temporary Register (R/W) */ #define TCH 0x0c /* Transfer Counter High (R/W) */ #define TCM 0x0d /* Transfer Counter Middle (R/W) */ #define TCL 0x0e /* Transfer Counter Low (R/W) */ #define EXBF 0x0f /* External Buffer (synch models) */ /* What all the bits do */ /* SCSI_BDID */ /* SCSI selection/reselection ID (both target *and* initiator) */ #define SELID7 0x80 #define SELID6 0x40 #define SELID5 0x20 #define SELID4 0x10 #define SELID3 0x08 #define SELID2 0x04 #define SELID1 0x02 #define SELID0 0x01 /* SCSI_SCTL */ #define SCTL_DISABLE 0x80 #define SCTL_CTRLRST 0x40 #define SCTL_DIAG 0x20 #define SCTL_ABRT_ENAB 0x10 #define SCTL_PARITY_ENAB 0x08 #define SCTL_SEL_ENAB 0x04 #define SCTL_RESEL_ENAB 0x02 #define SCTL_INTR_ENAB 0x01 /* SCSI_SCMD */ #define SCMD_RST 0x10 #define SCMD_ICPT_XFR 0x08 #define SCMD_PROG_XFR 0x04 #define SCMD_PAD 0x01 /* if initiator */ #define SCMD_PERR_STOP 0x01 /* if target */ /* command codes */ #define SCMD_BUS_REL 0x00 #define SCMD_SELECT 0x20 #define SCMD_RST_ATN 0x40 #define SCMD_SET_ATN 0x60 #define SCMD_XFR 0x80 #define SCMD_XFR_PAUSE 0xa0 #define SCMD_RST_ACK 0xc0 #define SCMD_SET_ACK 0xe0 /* SCSI_TMOD */ #define TMOD_SYNC 0x80 /* SCSI_INTS */ #define INTS_SEL 0x80 #define INTS_RESEL 0x40 #define INTS_DISCON 0x20 #define INTS_CMD_DONE 0x10 #define INTS_SRV_REQ 0x08 #define INTS_TIMEOUT 0x04 #define INTS_HARD_ERR 0x02 #define INTS_RST 0x01 /* SCSI_PSNS */ #define PSNS_REQ 0x80 #define PSNS_ACK 0x40 #define PSNS_ATN 0x20 #define PSNS_SEL 0x10 #define PSNS_BSY 0x08 /* PSNS */ #define REQI 0x80 #define ACKI 0x40 #define ATNI 0x20 #define SELI 0x10 #define BSYI 0x08 #define MSGI 0x04 #define CDI 0x02 #define IOI 0x01 /* Important! The 3 most significant bits of this register, in initiator mode, * represents the "expected" SCSI bus phase and can be used to trigger phase * mismatch and phase change interrupts. But more important: If there is a * phase mismatch the chip will not transfer any data! This is actually a nice * feature as it gives us a bit more control over what is happening when we are * bursting data (in) through the FIFOs and the phase suddenly changes from * DATA IN to STATUS or MESSAGE IN. The transfer will stop and wait for the * proper phase to be set in this register instead of dumping the bits into the * FIFOs. */ #if 0 #define REQO 0x80 #define ACKO 0x40 #define ATNO 0x20 #define SELO 0x10 #define BSYO 0x08 #endif /* PCTL */ #define MSGO 0x04 #define CDO 0x02 #define IOO 0x01 /* Information transfer phases */ #define PH_DATAOUT (0) #define PH_DATAIN (IOI) #define PH_CMD (CDI) #define PH_STAT (CDI | IOI) #define PH_MSGOUT (MSGI | CDI) #define PH_MSGIN (MSGI | CDI | IOI) #define PH_MASK (MSGI | CDI | IOI) #define PH_INVALID 0xff /* SCSI_SSTS */ #define SSTS_INITIATOR 0x80 #define SSTS_TARGET 0x40 #define SSTS_BUSY 0x20 #define SSTS_XFR 0x10 #define SSTS_ACTIVE (SSTS_INITIATOR|SSTS_XFR) #define SSTS_RST 0x08 #define SSTS_TCZERO 0x04 #define SSTS_DREG_FULL 0x02 #define SSTS_DREG_EMPTY 0x01 /* SCSI_SERR */ #define SERR_SCSI_PAR 0x80 #define SERR_SPC_PAR 0x40 #define SERR_TC_PAR 0x08 #define SERR_PHASE_ERR 0x04 #define SERR_SHORT_XFR 0x02 #define SERR_OFFSET 0x01 /* SCSI_PCTL */ #define PCTL_BFINT_ENAB 0x80