/* $NetBSD: nsphy.c,v 1.14 1998/11/04 23:44:09 thorpej Exp $ */ /*- * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1997 Manuel Bouyer. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Manuel Bouyer. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * driver for National Semiconductor's DP83840A ethernet 10/100 PHY * Data Sheet available from www.national.com */ #include #include #include #include #include #include #include #include #include #include #include #include struct nsphy_softc { struct mii_softc sc_mii; /* generic PHY */ int sc_ticks; int sc_active; }; int nsphymatch __P((struct device *, struct cfdata *, void *)); void nsphyattach __P((struct device *, struct device *, void *)); struct cfattach nsphy_ca = { sizeof(struct nsphy_softc), nsphymatch, nsphyattach }; int nsphy_service __P((struct mii_softc *, struct mii_data *, int)); void nsphy_status __P((struct nsphy_softc *)); int nsphymatch(parent, match, aux) struct device *parent; struct cfdata *match; void *aux; { struct mii_attach_args *ma = aux; if (MII_OUI(ma->mii_id1, ma->mii_id2) == MII_OUI_NATSEMI && MII_MODEL(ma->mii_id2) == MII_MODEL_NATSEMI_DP83840) return (10); return (0); } void nsphyattach(parent, self, aux) struct device *parent, *self; void *aux; { struct nsphy_softc *sc = (struct nsphy_softc *)self; struct mii_attach_args *ma = aux; struct mii_data *mii = ma->mii_data; printf(": %s, rev. %d\n", MII_STR_NATSEMI_DP83840, MII_REV(ma->mii_id2)); sc->sc_mii.mii_inst = mii->mii_instance; sc->sc_mii.mii_phy = ma->mii_phyno; sc->sc_mii.mii_service = nsphy_service; sc->sc_mii.mii_pdata = mii; /* * i82557 wedges if all of its PHYs are isolated! */ if (strcmp(parent->dv_cfdata->cf_driver->cd_name, "fxp") == 0 && mii->mii_instance == 0) sc->sc_mii.mii_flags |= MIIF_NOISOLATE; #define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL) #if 0 /* Can't do this on the i82557! */ ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->sc_mii.mii_inst), BMCR_ISO); #endif ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->sc_mii.mii_inst), BMCR_LOOP|BMCR_S100); mii_phy_reset(&sc->sc_mii); sc->sc_mii.mii_capabilities = PHY_READ(&sc->sc_mii, MII_BMSR) & ma->mii_capmask; printf("%s: ", sc->sc_mii.mii_dev.dv_xname); if ((sc->sc_mii.mii_capabilities & BMSR_MEDIAMASK) == 0) printf("no media present"); else mii_add_media(mii, sc->sc_mii.mii_capabilities, sc->sc_mii.mii_inst); printf("\n"); #undef ADD } int nsphy_service(self, mii, cmd) struct mii_softc *self; struct mii_data *mii; int cmd; { struct nsphy_softc *sc = (struct nsphy_softc *)self; struct ifmedia_entry *ife = mii->mii_media.ifm_cur; int reg; switch (cmd) { case MII_POLLSTAT: /* * If we're not polling our PHY instance, just return. */ if (IFM_INST(ife->ifm_media) != sc->sc_mii.mii_inst) return (0); break; case MII_MEDIACHG: /* * If the media indicates a different PHY instance, * isolate ourselves. */ if (IFM_INST(ife->ifm_media) != sc->sc_mii.mii_inst) { reg = PHY_READ(&sc->sc_mii, MII_BMCR); PHY_WRITE(&sc->sc_mii, MII_BMCR, reg | BMCR_ISO); return (0); } /* * If the interface is not up, don't do anything. */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) break; reg = PHY_READ(&sc->sc_mii, MII_NSPHY_PCR); /* * Set up the PCR to use LED4 to indicate full-duplex * in both 10baseT and 100baseTX modes. */ reg |= PCR_LED4MODE; /* * Make sure Carrier Intgrity Monitor function is * disabled (normal for Node operation, but sometimes * it's not set?!) */ reg |= PCR_CIMDIS; /* * Make sure "force link good" is not set. It's only * intended for debugging, but sometimes it's set * after a reset. */ reg &= ~PCR_FLINK100; #if 0 /* * Mystery bits which are supposedly `reserved', * but we seem to need to set them when the PHY * is connected to some interfaces! */ reg |= 0x0100 | 0x0400; #endif PHY_WRITE(&sc->sc_mii, MII_NSPHY_PCR, reg); switch (IFM_SUBTYPE(ife->ifm_media)) { case IFM_AUTO: /* * If we're already in auto mode, just return. */ if (PHY_READ(&sc->sc_mii, MII_BMCR) & BMCR_AUTOEN) return (0); (void) mii_phy_auto(&sc->sc_mii); break; case IFM_100_T4: /* * XXX Not supported as a manual setting right now. */ return (EINVAL); default: /* * BMCR data is stored in the ifmedia entry. */ PHY_WRITE(&sc->sc_mii, MII_ANAR, mii_anar(ife->ifm_media)); PHY_WRITE(&sc->sc_mii, MII_BMCR, ife->ifm_data); } break; case MII_TICK: /* * If we're not currently selected, just return. */ if (IFM_INST(ife->ifm_media) != sc->sc_mii.mii_inst) return (0); /* * Only used for autonegotiation. */ if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) return (0); /* * Is the interface even up? */ if ((mii->mii_ifp->if_flags & IFF_UP) == 0) return (0); /* * Check to see if we have link. If we do, we don't * need to restart the autonegotiation process. Read * the BMSR twice in case it's latched. */ reg = PHY_READ(&sc->sc_mii, MII_BMSR) | PHY_READ(&sc->sc_mii, MII_BMSR); if (reg & BMSR_LINK) return (0); /* * Only retry autonegotiation every 5 seconds. */ if (++sc->sc_ticks != 5) return (0); sc->sc_ticks = 0; mii_phy_reset(&sc->sc_mii); (void) mii_phy_auto(&sc->sc_mii); break; } /* Update the media status. */ nsphy_status(sc); /* Callback if something changed. */ if (sc->sc_active != mii->mii_media_active || cmd == MII_MEDIACHG) { (*mii->mii_statchg)(sc->sc_mii.mii_dev.dv_parent); sc->sc_active = mii->mii_media_active; } return (0); } void nsphy_status(sc) struct nsphy_softc *sc; { struct mii_data *mii = sc->sc_mii.mii_pdata; int bmsr, bmcr, par, anlpar; mii->mii_media_status = IFM_AVALID; mii->mii_media_active = IFM_ETHER; bmsr = PHY_READ(&sc->sc_mii, MII_BMSR) | PHY_READ(&sc->sc_mii, MII_BMSR); if (bmsr & BMSR_LINK) mii->mii_media_status |= IFM_ACTIVE; bmcr = PHY_READ(&sc->sc_mii, MII_BMCR); if (bmcr & BMCR_ISO) { mii->mii_media_active |= IFM_NONE; mii->mii_media_status = 0; return; } if (bmcr & BMCR_LOOP) mii->mii_media_active |= IFM_LOOP; if (bmcr & BMCR_AUTOEN) { /* * The PAR status bits are only valid of autonegotiation * has completed (or it's disabled). */ if ((bmsr & BMSR_ACOMP) == 0) { /* Erg, still trying, I guess... */ mii->mii_media_active |= IFM_NONE; return; } /* * Argh. The PAR doesn't seem to indicate duplex mode * properly! Determine media based on link partner's * advertised capabilities. */ if (PHY_READ(&sc->sc_mii, MII_ANER) & ANER_LPAN) { anlpar = PHY_READ(&sc->sc_mii, MII_ANAR) & PHY_READ(&sc->sc_mii, MII_ANLPAR); if (anlpar & ANLPAR_T4) mii->mii_media_active |= IFM_100_T4; else if (anlpar & ANLPAR_TX_FD) mii->mii_media_active |= IFM_100_TX|IFM_FDX; else if (anlpar & ANLPAR_TX) mii->mii_media_active |= IFM_100_TX; else if (anlpar & ANLPAR_10_FD) mii->mii_media_active |= IFM_10_T|IFM_FDX; else if (anlpar & ANLPAR_10) mii->mii_media_active |= IFM_10_T; else mii->mii_media_active |= IFM_NONE; return; } /* * Link partner is not capable of autonegotiation. * We will never be in full-duplex mode if this is * the case, so reading the PAR is OK. */ par = PHY_READ(&sc->sc_mii, MII_NSPHY_PAR); if (par & PAR_10) mii->mii_media_active |= IFM_10_T; else mii->mii_media_active |= IFM_100_TX; #if 0 if (par & PAR_FDX) mii->mii_media_active |= IFM_FDX; #endif } else { if (bmcr & BMCR_S100) mii->mii_media_active |= IFM_100_TX; else mii->mii_media_active |= IFM_10_T; if (bmcr & BMCR_FDX) mii->mii_media_active |= IFM_FDX; } }