/* $NetBSD: mpt_pci.c,v 1.4 2005/01/06 14:58:00 he Exp $ */ /* * Copyright (c) 2003 Wasabi Systems, Inc. * All rights reserved. * * Written by Jason R. Thorpe for Wasabi Systems, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Wasabi Systems, Inc. * 4. The name of Wasabi Systems, Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * mpt_pci.c: * * NetBSD PCI-specific routines for LSI Fusion adapters. */ #include __KERNEL_RCSID(0, "$NetBSD: mpt_pci.c,v 1.4 2005/01/06 14:58:00 he Exp $"); #include /* pulls in all headers */ #include #include #include #define MPT_PCI_MMBA (PCI_MAPREG_START+0x04) struct mpt_pci_softc { mpt_softc_t sc_mpt; pci_chipset_tag_t sc_pc; pcitag_t sc_tag; void *sc_ih; /* Saved volatile PCI configuration registers. */ pcireg_t sc_pci_csr; pcireg_t sc_pci_bhlc; pcireg_t sc_pci_io_bar; pcireg_t sc_pci_mem0_bar[2]; pcireg_t sc_pci_mem1_bar[2]; pcireg_t sc_pci_rom_bar; pcireg_t sc_pci_int; pcireg_t sc_pci_pmcsr; }; static void mpt_pci_link_peer(mpt_softc_t *); static void mpt_pci_read_config_regs(mpt_softc_t *); static void mpt_pci_set_config_regs(mpt_softc_t *); #define MPP_F_FC 0x01 /* Fibre Channel adapter */ #define MPP_F_DUAL 0x02 /* Dual port adapter */ static const struct mpt_pci_product { pci_vendor_id_t mpp_vendor; pci_product_id_t mpp_product; int mpp_flags; const char *mpp_name; } mpt_pci_products[] = { { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_1030, MPP_F_DUAL, "LSI Logic 53c1030 Ultra320 SCSI" }, { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC909, MPP_F_FC, "LSI Logic FC909 FC Adapter" }, { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC909A, MPP_F_FC, "LSI Logic FC909A FC Adapter" }, { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC929, MPP_F_FC | MPP_F_DUAL, "LSI Logic FC929 FC Adapter" }, { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC929_1, MPP_F_FC | MPP_F_DUAL, "LSI Logic FC929 FC Adapter" }, { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC919, MPP_F_FC, "LSI Logic FC919 FC Adapter" }, { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC919_1, MPP_F_FC, "LSI Logic FC919 FC Adapter" }, { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC929X, MPP_F_FC | MPP_F_DUAL, "LSI Logic FC929X FC Adapter" }, { PCI_VENDOR_SYMBIOS, PCI_PRODUCT_SYMBIOS_FC919X, MPP_F_FC, "LSI Logic FC919X FC Adapter" }, { 0, 0, 0, NULL }, }; static const struct mpt_pci_product * mpt_pci_lookup(const struct pci_attach_args *pa) { const struct mpt_pci_product *mpp; for (mpp = mpt_pci_products; mpp->mpp_name != NULL; mpp++) { if (PCI_VENDOR(pa->pa_id) == mpp->mpp_vendor && PCI_PRODUCT(pa->pa_id) == mpp->mpp_product) return (mpp); } return (NULL); } static int mpt_pci_match(struct device *parent, struct cfdata *cf, void *aux) { struct pci_attach_args *pa = aux; if (mpt_pci_lookup(pa) != NULL) return (1); return (0); } static void mpt_pci_attach(struct device *parent, struct device *self, void *aux) { struct mpt_pci_softc *psc = (void *) self; mpt_softc_t *mpt = &psc->sc_mpt; struct pci_attach_args *pa = aux; const struct mpt_pci_product *mpp; pci_intr_handle_t ih; const char *intrstr; pcireg_t reg, memtype; bus_space_tag_t memt; bus_space_handle_t memh; int memh_valid; mpp = mpt_pci_lookup(pa); if (mpp == NULL) { printf("\n"); panic("mpt_pci_attach"); } if (mpp->mpp_flags & MPP_F_FC) { mpt->is_fc = 1; aprint_naive(": Fibre Channel controller\n"); } else aprint_naive(": SCSI controller\n"); aprint_normal(": %s\n", mpp->mpp_name); psc->sc_pc = pa->pa_pc; psc->sc_tag = pa->pa_tag; mpt->sc_dmat = pa->pa_dmat; mpt->sc_set_config_regs = mpt_pci_set_config_regs; /* * Map the device. */ memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, MPT_PCI_MMBA); switch (memtype) { case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT: case PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT: memh_valid = (pci_mapreg_map(pa, MPT_PCI_MMBA, memtype, 0, &memt, &memh, NULL, NULL) == 0); break; default: memh_valid = 0; } if (memh_valid) { mpt->sc_st = memt; mpt->sc_sh = memh; } else { aprint_error("%s: unable to map device registers\n", mpt->sc_dev.dv_xname); return; } /* * Make sure the PCI command register is properly configured. */ reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); reg |= PCI_COMMAND_MASTER_ENABLE; /* XXX PCI_COMMAND_INVALIDATE_ENABLE */ /* XXX PCI_COMMAND_PARITY_ENABLE */ /* XXX PCI_COMMAND_SERR_ENABLE */ pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, reg); /* * Ensure that the ROM is diabled. */ reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_MAPREG_ROM); reg &= ~1; pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_MAPREG_ROM, reg); /* * Map and establish our interrupt. */ if (pci_intr_map(pa, &ih) != 0) { aprint_error("%s: unable to map interrupt\n", mpt->sc_dev.dv_xname); return; } intrstr = pci_intr_string(pa->pa_pc, ih); psc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO, mpt_intr, mpt); if (psc->sc_ih == NULL) { aprint_error("%s: unable to establish interrupt", mpt->sc_dev.dv_xname); if (intrstr != NULL) aprint_normal(" at %s", intrstr); aprint_normal("\n"); return; } aprint_normal("%s: interrupting at %s\n", mpt->sc_dev.dv_xname, intrstr); /* Disable interrupts on the part. */ mpt_disable_ints(mpt); /* Allocate DMA memory. */ if (mpt_dma_mem_alloc(mpt) != 0) { aprint_error("%s: unable to allocate DMA memory\n", mpt->sc_dev.dv_xname); return; } /* * Save the PCI config register values. * * Hard resets are known to screw up the BAR for diagnostic * memory accesses (Mem1). * * Using Mem1 is know to make the chip stop responding to * configuration cycles, so we need to save it now. */ mpt_pci_read_config_regs(mpt); /* * If we're a dual-port adapter, try to find our peer. We * need to fix his PCI config registers, too. */ if (mpp->mpp_flags & MPP_F_DUAL) mpt_pci_link_peer(mpt); /* Initialize the hardware. */ if (mpt_init(mpt, MPT_DB_INIT_HOST) != 0) { /* Error message already printed. */ return; } /* Attach to scsipi. */ mpt_scsipi_attach(mpt); } CFATTACH_DECL(mpt_pci, sizeof(struct mpt_pci_softc), mpt_pci_match, mpt_pci_attach, NULL, NULL); /* * Find and remember our peer PCI function on a dual-port device. */ static void mpt_pci_link_peer(mpt_softc_t *mpt) { extern struct cfdriver mpt_cd; struct mpt_pci_softc *peer_psc, *psc = (void *) mpt; struct device *dev; int unit, b, d, f, peer_b, peer_d, peer_f; pci_decompose_tag(psc->sc_pc, psc->sc_tag, &b, &d, &f); for (unit = 0; unit < mpt_cd.cd_ndevs; unit++) { if (unit == mpt->sc_dev.dv_unit) continue; dev = device_lookup(&mpt_cd, unit); if (dev == NULL) continue; if (dev->dv_cfattach != &mpt_pci_ca) continue; peer_psc = (void *) dev; if (peer_psc->sc_pc != psc->sc_pc) continue; pci_decompose_tag(peer_psc->sc_pc, peer_psc->sc_tag, &peer_b, &peer_d, &peer_f); if (peer_b == b && peer_d == d) { if (mpt->verbose) mpt_prt(mpt, "linking with peer: %s", peer_psc->sc_mpt.sc_dev.dv_xname); mpt->mpt2 = (mpt_softc_t *) peer_psc; peer_psc->sc_mpt.mpt2 = mpt; return; } } } /* * Save the volatile PCI configuration registers. */ static void mpt_pci_read_config_regs(mpt_softc_t *mpt) { struct mpt_pci_softc *psc = (void *) mpt; psc->sc_pci_csr = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_COMMAND_STATUS_REG); psc->sc_pci_bhlc = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_BHLC_REG); psc->sc_pci_io_bar = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_MAPREG_START); psc->sc_pci_mem0_bar[0] = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_MAPREG_START+0x04); psc->sc_pci_mem0_bar[1] = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_MAPREG_START+0x08); psc->sc_pci_mem1_bar[0] = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_MAPREG_START+0x0c); psc->sc_pci_mem1_bar[1] = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_MAPREG_START+0x10); psc->sc_pci_rom_bar = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_MAPREG_ROM); psc->sc_pci_int = pci_conf_read(psc->sc_pc, psc->sc_tag, PCI_INTERRUPT_REG); psc->sc_pci_pmcsr = pci_conf_read(psc->sc_pc, psc->sc_tag, 0x44); } /* * Restore the volatile PCI configuration registers. */ static void mpt_pci_set_config_regs(mpt_softc_t *mpt) { struct mpt_pci_softc *psc = (void *) mpt; pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_COMMAND_STATUS_REG, psc->sc_pci_csr); pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_BHLC_REG, psc->sc_pci_bhlc); pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_MAPREG_START, psc->sc_pci_io_bar); pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_MAPREG_START+0x04, psc->sc_pci_mem0_bar[0]); pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_MAPREG_START+0x08, psc->sc_pci_mem0_bar[1]); pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_MAPREG_START+0x0c, psc->sc_pci_mem1_bar[0]); pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_MAPREG_START+0x10, psc->sc_pci_mem1_bar[1]); pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_MAPREG_ROM, psc->sc_pci_rom_bar); pci_conf_write(psc->sc_pc, psc->sc_tag, PCI_INTERRUPT_REG, psc->sc_pci_int); pci_conf_write(psc->sc_pc, psc->sc_tag, 0x44, psc->sc_pci_pmcsr); }