# $NetBSD: KZSH401,v 1.13 2002/03/10 19:56:41 lukem Exp $ # # GENERIC -- everything that's currently supported # # for big endian include "arch/evbsh3/conf/std.evbsh3.eb" # for little endian #include "arch/evbsh3/conf/std.evbsh3.el" # Enable the hooks used for initializing the root memory-disk. options MEMORY_DISK_HOOKS options MEMORY_DISK_IS_ROOT # force root on memory disk options MEMORY_DISK_SERVER=0 # no userspace memory disk support options MEMORY_DISK_SIZE=2880 # size of memory disk, in blocks maxusers 16 # estimated number of users # CPU support options SH7750 options SH4 options SH4_PCMCIA options EVBSH4 options MMEYE #options MMEYE_NEW_INT #options CACHE_DISABLE options PCLOCK=33333300 # 33.3333MHz options IOM_ROM_BEGIN=0x00000000 options IOM_ROM_SIZE=0x00100000 # 1MB options IOM_RAM_BEGIN=0x88000000 options IOM_RAM_SIZE=0x01000000 # 16MB options INITTODR_ALWAYS_USE_RTC options BRAINS options USE_RTCCLK options SYNC_CLOCK_TO_RTC options BSC_BCR1_VAL =0x8000000c options BSC_BCR2_VAL =0xb538 options BSC_WCR1_VAL =0x00010111 options BSC_WCR2_VAL =0x108a2520 options BSC_WCR3_VAL =0x00000000 options BSC_MCR_VAL =0x10192194 #options BSC_PCR_VAL =0x08eb options BSC_RTCSR_VAL =0xa510 #options BSC_RTCNT_VAL =0xa500 options BSC_RTCOR_VAL =0xa541 options BSC_RFCR_VAL =0xa400 options FRQCR_VAL =0x0e13 options BSC_SDMR2_VAL =0xff90008c options LED_ADDR=0xa8000000 # Standard system options #options UCONSOLE # users can use TIOCCONS (for xconsole) #options INSECURE # disable kernel security levels options RTC_OFFSET=-540 options HZ=64 # clock interrupt generates every 1/HZ sec #options NTP # NTP phase/frequency locked loop #options KTRACE # system call tracing via ktrace(1) #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) #options SYSVMSG # System V-like message queues #options SYSVSEM # System V-like semaphores #options SYSVSHM # System V-like memory sharing #options SHMMAXPGS=1024 # 1024 pages is the default # Diagnostic/debugging support options #options DIAGNOSTIC # cheap kernel consistency checks #options DEBUG # expensive debugging checks/support #options DDB # in-kernel debugger #makeoptions DEBUG="-g" # compile full symbol table #options SYSCALL_DEBUG #options UVMHIST #options UVMHIST_PRINT # Compatibility options options COMPAT_13 # NetBSD 1.3 options COMPAT_14 # NetBSD 1.4, options COMPAT_43 # and 4.3BSD # Executable format options options EXEC_COFF # COFF executables #options EXEC_ELF32 # 32-bit ELF executables # File systems file-system FFS # UFS file-system MFS # memory file system #file-system NFS # Network File System client file-system PROCFS # /proc file-system KERNFS # /kern #file-system NULLFS # loopback file system #file-system UMAPFS # NULLFS + uid and gid remapping # File system options #options QUOTA # UFS quotas #options NFSSERVER # Network File System server # Networking options options INET # IP + ICMP + TCP + UDP #options NFS_BOOT_DHCP # Support DHCP NFS root #options PCIVERBOSE # verbose PCI device autoconfig messages #options PCI_CONFIG_DUMP # verbosely dump PCI config space #options PCMCIAVERBOSE # verbose PCMCIA configuration messages # Kernel root file system and dump configuration. #config netbsd root on ? type nfs #config netbsd root on wd0a type ffs config netbsd root on ? type ffs # # Device configuration # mainbus0 at root shb* at mainbus? # Serial Devices options SCIFCN_SPEED=19200 scif0 at shb? port 0xffe80000 irq 12 #com0 at shb? port 0xa4000000 irq 11 #com1 at shb? port 0xa4000008 irq 12 # SH PCMCIA controllers #shpcic0 at shb? port 0xb000000a iomem 0xb8000000 iosiz 0x1000000 #shpcic1 at shb? port 0xb000000c iomem 0xb9000000 iosiz 0x1000000 # PCMCIA bus support #pcmcia* at shpcic? controller ? socket ? #com* at pcmcia? function ? # Modems and serial cards #wdc* at pcmcia? function ? #wd* at wdc? drive ? # the drives themselves #ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet #mbe* at pcmcia? function ? # MB8696x based Ethernet #ne* at pcmcia? function ? # NE2000-compatible Ethernet #sm* at pcmcia? function ? # Megahertz Ethernet #pseudo-device vnd 4 # disk-like interface to files #pseudo-device bpfilter 8 # Berkeley packet filter #pseudo-device ipfilter # IP filter (firewall) and NAT pseudo-device loop # network loopback pseudo-device pty # pseudo-terminals #pseudo-device ppp 2 # Point-to-Point Protocol #pseudo-device tun 2 # network tunneling over tty # Enable the hooks used for initializing the root memory-disk. #options MEMORY_DISK_HOOKS #options MEMORY_DISK_IS_ROOT # force root on memory disk #options MEMORY_DISK_SERVER=0 # no userspace memory disk support #options MEMORY_DISK_SIZE=3074 # size of memory disk, in blocks pseudo-device md 1 # memory disk device (ramdisk)