#
# $NetBSD: MILAN-ISAIDE,v 1.5 2001/07/26 15:05:09 wiz Exp $
#
# This file was automatically created. Changes will be
# lost when running makeconf in this directory.
#
# Created from: 
#		NetBSD: MILAN.in,v 1.6 2001/06/07 07:56:57 leo Exp $
#		NetBSD: GENERIC.in,v 1.6 2001/07/09 13:37:38 leo Exp $

#This configuration file is for a generic Milan

#Generic atari

include "arch/atari/conf/std.milan"

#Add support for about 16 users. This variable is used to size
#various kernel structures.

maxusers	16

options 	HZ=64		# Set the clock-rate (48/64/96)

#X11R6 related options

options 	UCONSOLE	# Allow xconsole to work

#Standard system options
options 	INSECURE	# disable kernel security levels
#options 	NTP		# NTP phase/frequency locked loop

#(Co)processors this kernel should support

options 	M68040		# support for 040
options 	M68060		# support for 060
options 	FPSP		# 68040 Floatingpoint support
options 	M060SP		# MC68060 software support (Required for 060)

#Networking options

options 	INET            # IP + ICMP + TCP + UDP

options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	GATEWAY         # packet forwarding
#options 	MROUTING        # IP multicast routing
options 	NS              # XNS
#options 	NSIP            # XNS tunneling over IP
options 	ISO,TPIP        # OSI
#options 	EON             # OSI tunneling over IP
options 	CCITT,LLC,HDLC  # X.25
options 	NETATALK        # AppleTalk networking protocols

options 	PPP_BSDCOMP     # BSD-Compress compression support for PPP
options 	PPP_DEFLATE     # Deflate compression support for PPP
options 	PPP_FILTER      # Active filter support for PPP (requires bpf)

options 	PFIL_HOOKS      # pfil(9) packet filter hooks
options 	IPFILTER_LOG    # ipmon(8) log support
#options 	IPFILTER_DEFAULT_BLOCK	# block packages by default

#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

#File systems
file-system 	FFS		# Berkeley fast file system
file-system 	MFS		# Memory based filesystem
file-system 	KERNFS		# Kernel parameter filesystem
file-system 	MSDOSFS		# MSDOS filesystem
file-system 	CD9660		# ISO 9660 filesystem with Rock Ridge

file-system 	NFS		# Network File System client side code
file-system 	PROCFS		# Process filesystem
file-system 	FDESC		# /dev/fd
file-system 	NULLFS		# Loopback filesystem
file-system 	OVERLAY		# overlay filesystem
file-system 	UNION		# union file system
file-system 	UMAPFS		# null file system (with uid & gid remapping)
file-system 	PORTAL		# portal file system
file-system 	EXT2FS		# second extended file system (linux)
file-system 	LFS		# log-structured file system

#File system options
options 	QUOTA		# Disk quotas for local disks
#options 	FFS_EI		# FFS Endian Independant support
options 	SOFTDEP         # FFS soft updates support.
options 	NFSSERVER	# Network File System server side code
#options 	EXT2FS_SYSTEM_FLAGS	# makes ext2fs file flags (append and
				#immutable) behave as system flags.

#Misc. debugging options

options 	PANICWAIT	# Require keystroke to dump/reboot
options 	DDB		# Kernel debugger

options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
#options 	DEBUG		# expensive debugging checks/support

#Compatibility options for various existing systems

options 	COMPAT_43	# 4.3 BSD compatible system calls (required)
options 	COMPAT_10	# Compatibility to NetBSD1.0
options 	COMPAT_11	# Compatibility to NetBSD1.1
options 	COMPAT_12	# Compatibility to NetBSD1.2
options 	COMPAT_13	# Compatibility to NetBSD1.3
options 	COMPAT_14	# Compatibility to NetBSD1.4

#options 	COMPAT_09	# has no meaning on the atari
#options 	COMPAT_SUNOS	# Support to run Sun-3 executables
#options 	COMPAT_SVR4	# Support to run SVR4 executables
#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
#options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.

#Support for System V IPC facilities.

options 	SYSVSHM			# System V shared memory
options 	SYSVMSG			# System V messages
options 	SYSVSEM			# System V semaphores
#options 	SEMMNI=10		# number of semaphore identifiers
#options 	SEMUME=10		# max number of undo entries per proc.
#options 	SEMMNU=30		# number of undo structures in system

#Support for various kernel options

options 	KTRACE			# Add kernel tracing system call
options 	DIAGNOSTIC		# Add additional error checking code

#These options enable verbose messages for several subsystems.
#Warning, these may compile large string tables into the kernel!

options 	SCSIVERBOSE		# human readable SCSI error messages

options 	PCIVERBOSE		# verbose PCI device autoconfig messages
#options 	PCI_CONFIG_DUMP		# verbosely dump PCI config space

#Atari specific options

#options 	KFONT_8x8		# Use 8x8 font instead of 8x16
options 	ST_POOL_SIZE=22		# smallest that allows TT-HIGH

options 	MEMORY_DISK_HOOKS	# Boot RAM-disk
options 	DISKLABEL_NBDA		# NetBSD disklabels (required)
options 	DISKLABEL_AHDI		# NetBSD/AHDI disklabels

options 	SERCONSOLE		# modem1 console support
options 	RELOC_KERNEL		# TT/Falcon: relocate kernel to TT-RAM
options 	STATCLOCK		# Separate {stat,prof}clock

#Try linked commands on all targets
options 	TRY_SCSI_LINKED_COMMANDS=0x7f

#Build one kernel that can boot from any disk.

config		netbsd root on ? type ?

pseudo-device	sl			# Slip
pseudo-device	ppp			# ppp
pseudo-device	pty			# pseudo-terminals
pseudo-device	loop			# Loopback network
pseudo-device	vnd		3	# 3 pseudo disks (see vnconfig)
pseudo-device	md		2	# Boot memory disk

pseudo-device	bpfilter	2	# berkeley packet filters
pseudo-device	tun		2	# network tunnel
#pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
pseudo-device	vlan			# IEEE 802.1q encapsulation
pseudo-device	ccd		4	# concatenating disk driver
#pseudo-device	raid		4	# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
pseudo-device	ipfilter		# IP filtering device
pseudo-device	rnd			# /dev/random and in-kernel generator

#Hardware options for GENERIC are in the various machine type specific files

#For the moment, the MILAN will be the only one to use wscons, so define
#the wscons options here too for the moment.
#wscons options

#builtin terminal emulations
#options 	WSEMUL_SUN	# sun terminal emulation
options 	WSEMUL_VT100	# VT100 / VT220 emulation
#different kernel output - see dev/wscons/wsdisplayvar.h
#XXX: Since the Milan VGA works in monochrome for the moment, _only_
#use black and white here!
options 	WS_KERNEL_FG=WSCOL_WHITE
options 	WS_KERNEL_BG=WSCOL_BLACK

#compatibility to other console drivers
#options 	WSDISPLAY_COMPAT_USL	# VT handling
#options 	WSDISPLAY_COMPAT_RAWKBD	# can get raw scancodes

#see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
#allocate a number of virtual screens at autoconfiguration time
options 	WSDISPLAY_DEFAULTSCREENS=4
#use a large software cursor that doesn't blink
options 	PCDISPLAY_SOFTCURSOR
#modify the screen type of the console; defaults to "80x25"
#options 	VGA_CONSOLE_SCREENTYPE="\"80x25\""

#The following sections describe various hardware options.

isabus0 	at mainbus0			# ISA-bus
isa0 		at isabus0
pcibus0 	at mainbus0			# PCI-bus
pci0 		at pcibus0
ser0 		at mainbus0
fdcisa0 	at isa? port 0x3f0 irq 6 drq 2  # standard PC floppy contr.
fdisa0 		at fdcisa0 drive 0

#Ok, the stuff below requires some explanation...
#Initially, when Atari started with IDE on the Falcon, they decided to
#swap the bytelanes on the IDE controller. So all data on the disk was
#byteswapped and all CDROM drivers had to byteswap the data to make
#this nice idea work... To remain compatible with the 'current' drivers,
#this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan
#however, the change was reverted. But... now the hardware is connected to
#a little endian (ISA) bus, in PIO mode this is essentially the same as
#swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode
#provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data
# on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER
#developers have thought up a solution, you can make a byteswapped disk
#during the partioning with HDDRIVER and TOS supports booting from it!
#Ok, now you have to choose:
#- If _none_ of your disks are marked byteswapped by HDDRIVER, choose
#the 1  version.
#- If _all_ of your disks are byteswapped, use the  MILAN_PCIIDE version
#The is no way to mix things!

#wdc on ISA with flags = WDC_OPTIONS_ATA_NOSTREAM!
wdc0 		at isa? port 0x1f0 irq 14 flags 0x04	# 1st IDE controller
wdc1 		at isa? port 0x170 irq 15 flags 0x04	# 2nd IDE controller
wd* 		at wdc? channel ? drive ?
atapibus* 	at wdc?	channel ?			# ATAPI bus support

#The Milan uses wscons
#XXX without the __HAVE_NWSCONS option, the keyboard won't work...
#
options 	__HAVE_NWSCONS
vga0 		at pci? dev ? function ?	# a PCI VGA card
wsdisplay* 	at vga? console ?		# as a wscons console
pckbc0 		at isa? 			# PC keyboard controller
pckbd* 		at pckbc?			# PC keyboard
wskbd* 		at pckbd? console ?		# wscons keyboard

#ATAPI devices
cd* 		at atapibus? drive ?		# ATAPI CD-ROM drives