# $NetBSD: FOUR_TTYS,v 1.12 1997/12/01 16:07:06 kleink Exp $ # # FOUR_TTYS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260) # like GENERIC but both zs chips are used as ttys # include "arch/sun3/conf/std.sun3" # Machines to be supported by this kernel options FPU_EMULATE options HAVECACHE # Sun3/260 VAC # Needs to be set per system. i.e change these as you see fit maxusers 4 # Standard system options options KTRACE # system call tracing support # Debugging options. Uncomment either this: options DDB # ... or these for KGDB (gdb remote target) #makeoptions DEBUG="-g" # debugging symbols for gdb #options KGDB #options KGDBDEV=0x0C01 # Other debugging options #options DDB_HISTORY_SIZE=100 # enable history editing in DDB # Filesystem options file-system FFS # ufs file system file-system NFS # nfs client support file-system CD9660 # ISO 9660 + Rock Ridge file system file-system FDESC # /dev/fd/* file-system KERNFS # /kern file-system NULLFS # loopback file system file-system PROCFS # /proc file-system UNION # union file system file-system MFS # memory-based filesystem options NFSSERVER # nfs server support options FIFO # FIFOs; RECOMMENDED # Networking options options INET # IP prototol stack support #options GATEWAY # IP packet forwarding options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD # XXX - Work-around for root on slow servers (insurance...) options NFS_BOOT_RWSIZE=1024 # Compatability options options COMPAT_SUNOS # can run SunOS 4.1.1 executables options COMPAT_43 # and 4.3BSD and ... options COMPAT_10 # NetBSD 1.0 options COMPAT_11 # NetBSD 1.1 options COMPAT_12 # NetBSD 1.2 options COMPAT_13 # NetBSD 1.3 options UCONSOLE # Allow non-root TIOCCONS # Sun3-specific debugging options #options PMAP_DEBUG #options VMFAULT_TRACE #options SYSCALL_DEBUG #options EXEC_DEBUG options DIAGNOSTIC #options SCSIDEBUG config netbsd root on ? type ? # # Serial ports # zstty0 at zsc1 channel 0 # ttya zstty1 at zsc1 channel 1 # ttyb # # Note that by ommitting "kdb0" and "ms0" one can build # a kernel that operates four plain serial lines, where # two of them are data-leads-only ports wired up using # a custom cable on the keyboard connector. # zstty2 at zsc0 channel 0 # ttyc zstty3 at zsc0 channel 1 # ttyd # # Network devices # # Intel Ethernet (onboard, or VME) ie0 at obio0 addr 0x0C0000 level 3 ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75 # Lance Ethernet (only onboard) le0 at obio0 addr 0x120000 level 3 # # Disk and tape devices # # Sun3 "si" SCSI controller (NCR 5380) si0 at obio0 addr 0x140000 level 2 si0 at vmes0 addr 0xff200000 level 2 vect 0x40 si1 at vmes0 addr 0xff204000 level 2 vect 0x41 # Xylogics 450/451 controllers # xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48 # xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49 # Just wire-down the units so bootdev match is easy. # xy0 at xyc0 drive 0 # xy1 at xyc0 drive 1 # xy2 at xyc1 drive 0 # xy3 at xyc1 drive 1 # Xylogics 7053 controllers # xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44 # xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45 # Just wire-down the units so bootdev match is easy. # xd0 at xdc0 drive 0 # xd1 at xdc0 drive 1 # xd2 at xdc1 drive 0 # xd3 at xdc1 drive 1 # Xylogics 472 tape controllers? # # Frame buffer devices # # The default cgfour address depends on the machine: # 3/60: obmem 0xFF200000 .. 0xFF9fffff # 3/110: different? (not tested) cgfour0 at obmem0 addr ? # 3/60 P4 accelerated 8-bit color frame buffer # cgsix0 at obmem0 addr ? # 3/60 P4 24-bit color frame buffer # cgeight0 at obmem0 addr ? # The default bwtwo address depends on the machine: # 3/50: obmem 0x100000 # else: obmem 0xff000000 bwtwo0 at obmem0 addr ? # 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer #bwtwo1 at obmem0 addr 0xff300000 # 3/60 plug-in color frame buffer overlay plane #bwtwo1 at obmem0 addr 0xff400000 # Sun-3 color board, or CG5 8-bit VME frame buffer. cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8 # Support for the CG9 24-bit VME frame buffer. # cgnine0 at vmel0 addr 0x08000000 # # SCSI infrastructure # scsibus* at scsi? sd* at scsibus? target ? lun ? # SCSI disks st* at scsibus? target ? lun ? # SCSI tapes cd* at scsibus? target ? lun ? # SCSI CD-ROMs ch* at scsibus? target ? lun ? # SCSI changer devices ss* at scsibus? target ? lun ? # SCSI scanners uk* at scsibus? target ? lun ? # unknown SCSI devices # Memory-disk drivers pseudo-device md 2 # Misc. pseudo-device loop 1 # network loopback pseudo-device bpfilter 8 # packet filter pseudo-device sl 2 # CSLIP pseudo-device ppp 2 # PPP pseudo-device tun 2 # network tunneling over tty #pseudo-device ipfilter # ip filter pseudo-device pty 64 # pseudo-terminals #pseudo-device vnd 4 # paging to files #pseudo-device ccd 4 # concatenated disks