/* $NetBSD: elinkxl.c,v 1.119 2016/06/10 13:27:13 ozaki-r Exp $ */ /*- * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Frank van der Linden. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: elinkxl.c,v 1.119 2016/06/10 13:27:13 ozaki-r Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* #include */ #include #include #ifdef DEBUG int exdebug = 0; #endif /* ifmedia callbacks */ int ex_media_chg(struct ifnet *ifp); void ex_media_stat(struct ifnet *ifp, struct ifmediareq *req); static int ex_ifflags_cb(struct ethercom *); void ex_probe_media(struct ex_softc *); void ex_set_filter(struct ex_softc *); void ex_set_media(struct ex_softc *); void ex_set_xcvr(struct ex_softc *, uint16_t); struct mbuf *ex_get(struct ex_softc *, int); uint16_t ex_read_eeprom(struct ex_softc *, int); int ex_init(struct ifnet *); void ex_read(struct ex_softc *); void ex_reset(struct ex_softc *); void ex_set_mc(struct ex_softc *); void ex_getstats(struct ex_softc *); void ex_printstats(struct ex_softc *); void ex_tick(void *); static int ex_eeprom_busy(struct ex_softc *); static int ex_add_rxbuf(struct ex_softc *, struct ex_rxdesc *); static void ex_init_txdescs(struct ex_softc *); static void ex_setup_tx(struct ex_softc *); static bool ex_shutdown(device_t, int); static void ex_start(struct ifnet *); static void ex_txstat(struct ex_softc *); int ex_mii_readreg(device_t, int, int); void ex_mii_writereg(device_t, int, int, int); void ex_mii_statchg(struct ifnet *); void ex_probemedia(struct ex_softc *); /* * Structure to map media-present bits in boards to ifmedia codes and * printable media names. Used for table-driven ifmedia initialization. */ struct ex_media { int exm_mpbit; /* media present bit */ const char *exm_name; /* name of medium */ int exm_ifmedia; /* ifmedia word for medium */ int exm_epmedia; /* ELINKMEDIA_* constant */ }; /* * Media table for 3c90x chips. Note that chips with MII have no * `native' media. */ struct ex_media ex_native_media[] = { { ELINK_PCI_10BASE_T, "10baseT", IFM_ETHER|IFM_10_T, ELINKMEDIA_10BASE_T }, { ELINK_PCI_10BASE_T, "10baseT-FDX", IFM_ETHER|IFM_10_T|IFM_FDX, ELINKMEDIA_10BASE_T }, { ELINK_PCI_AUI, "10base5", IFM_ETHER|IFM_10_5, ELINKMEDIA_AUI }, { ELINK_PCI_BNC, "10base2", IFM_ETHER|IFM_10_2, ELINKMEDIA_10BASE_2 }, { ELINK_PCI_100BASE_TX, "100baseTX", IFM_ETHER|IFM_100_TX, ELINKMEDIA_100BASE_TX }, { ELINK_PCI_100BASE_TX, "100baseTX-FDX",IFM_ETHER|IFM_100_TX|IFM_FDX, ELINKMEDIA_100BASE_TX }, { ELINK_PCI_100BASE_FX, "100baseFX", IFM_ETHER|IFM_100_FX, ELINKMEDIA_100BASE_FX }, { ELINK_PCI_100BASE_MII,"manual", IFM_ETHER|IFM_MANUAL, ELINKMEDIA_MII }, { ELINK_PCI_100BASE_T4, "100baseT4", IFM_ETHER|IFM_100_T4, ELINKMEDIA_100BASE_T4 }, { 0, NULL, 0, 0 }, }; /* * MII bit-bang glue. */ uint32_t ex_mii_bitbang_read(device_t); void ex_mii_bitbang_write(device_t, uint32_t); const struct mii_bitbang_ops ex_mii_bitbang_ops = { ex_mii_bitbang_read, ex_mii_bitbang_write, { ELINK_PHY_DATA, /* MII_BIT_MDO */ ELINK_PHY_DATA, /* MII_BIT_MDI */ ELINK_PHY_CLK, /* MII_BIT_MDC */ ELINK_PHY_DIR, /* MII_BIT_DIR_HOST_PHY */ 0, /* MII_BIT_DIR_PHY_HOST */ } }; /* * Back-end attach and configure. */ void ex_config(struct ex_softc *sc) { struct ifnet *ifp; uint16_t val; uint8_t macaddr[ETHER_ADDR_LEN] = {0}; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int i, error, attach_stage; pmf_self_suspensor_init(sc->sc_dev, &sc->sc_suspensor, &sc->sc_qual); callout_init(&sc->ex_mii_callout, 0); ex_reset(sc); val = ex_read_eeprom(sc, EEPROM_OEM_ADDR0); macaddr[0] = val >> 8; macaddr[1] = val & 0xff; val = ex_read_eeprom(sc, EEPROM_OEM_ADDR1); macaddr[2] = val >> 8; macaddr[3] = val & 0xff; val = ex_read_eeprom(sc, EEPROM_OEM_ADDR2); macaddr[4] = val >> 8; macaddr[5] = val & 0xff; aprint_normal_dev(sc->sc_dev, "MAC address %s\n", ether_sprintf(macaddr)); if (sc->ex_conf & (EX_CONF_INV_LED_POLARITY|EX_CONF_PHY_POWER)) { GO_WINDOW(2); val = bus_space_read_2(iot, ioh, ELINK_W2_RESET_OPTIONS); if (sc->ex_conf & EX_CONF_INV_LED_POLARITY) val |= ELINK_RESET_OPT_LEDPOLAR; if (sc->ex_conf & EX_CONF_PHY_POWER) val |= ELINK_RESET_OPT_PHYPOWER; bus_space_write_2(iot, ioh, ELINK_W2_RESET_OPTIONS, val); } if (sc->ex_conf & EX_CONF_NO_XCVR_PWR) { GO_WINDOW(0); bus_space_write_2(iot, ioh, ELINK_W0_MFG_ID, EX_XCVR_PWR_MAGICBITS); } attach_stage = 0; /* * Allocate the upload descriptors, and create and load the DMA * map for them. */ if ((error = bus_dmamem_alloc(sc->sc_dmat, EX_NUPD * sizeof (struct ex_upd), PAGE_SIZE, 0, &sc->sc_useg, 1, &sc->sc_urseg, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "can't allocate upload descriptors, error = %d\n", error); goto fail; } attach_stage = 1; if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_useg, sc->sc_urseg, EX_NUPD * sizeof (struct ex_upd), (void **)&sc->sc_upd, BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { aprint_error_dev(sc->sc_dev, "can't map upload descriptors, error = %d\n", error); goto fail; } attach_stage = 2; if ((error = bus_dmamap_create(sc->sc_dmat, EX_NUPD * sizeof (struct ex_upd), 1, EX_NUPD * sizeof (struct ex_upd), 0, BUS_DMA_NOWAIT, &sc->sc_upd_dmamap)) != 0) { aprint_error_dev(sc->sc_dev, "can't create upload desc. DMA map, error = %d\n", error); goto fail; } attach_stage = 3; if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_upd_dmamap, sc->sc_upd, EX_NUPD * sizeof (struct ex_upd), NULL, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "can't load upload desc. DMA map, error = %d\n", error); goto fail; } attach_stage = 4; /* * Allocate the download descriptors, and create and load the DMA * map for them. */ if ((error = bus_dmamem_alloc(sc->sc_dmat, DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN, PAGE_SIZE, 0, &sc->sc_dseg, 1, &sc->sc_drseg, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "can't allocate download descriptors, error = %d\n", error); goto fail; } attach_stage = 5; if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_dseg, sc->sc_drseg, DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN, (void **)&sc->sc_dpd, BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) { aprint_error_dev(sc->sc_dev, "can't map download descriptors, error = %d\n", error); goto fail; } memset(sc->sc_dpd, 0, DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN); attach_stage = 6; if ((error = bus_dmamap_create(sc->sc_dmat, DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN, 1, DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN, 0, BUS_DMA_NOWAIT, &sc->sc_dpd_dmamap)) != 0) { aprint_error_dev(sc->sc_dev, "can't create download desc. DMA map, error = %d\n", error); goto fail; } attach_stage = 7; if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dpd_dmamap, sc->sc_dpd, DPDMEM_SIZE + EX_IP4CSUMTX_PADLEN, NULL, BUS_DMA_NOWAIT)) != 0) { aprint_error_dev(sc->sc_dev, "can't load download desc. DMA map, error = %d\n", error); goto fail; } bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, DPDMEMPAD_OFF, EX_IP4CSUMTX_PADLEN, BUS_DMASYNC_PREWRITE); attach_stage = 8; /* * Create the transmit buffer DMA maps. */ for (i = 0; i < EX_NDPD; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, EX_NTFRAGS, MCLBYTES, 0, BUS_DMA_NOWAIT, &sc->sc_tx_dmamaps[i])) != 0) { aprint_error_dev(sc->sc_dev, "can't create tx DMA map %d, error = %d\n", i, error); goto fail; } } attach_stage = 9; /* * Create the receive buffer DMA maps. */ for (i = 0; i < EX_NUPD; i++) { if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, EX_NRFRAGS, MCLBYTES, 0, BUS_DMA_NOWAIT, &sc->sc_rx_dmamaps[i])) != 0) { aprint_error_dev(sc->sc_dev, "can't create rx DMA map %d, error = %d\n", i, error); goto fail; } } attach_stage = 10; /* * Create ring of upload descriptors, only once. The DMA engine * will loop over this when receiving packets, stalling if it * hits an UPD with a finished receive. */ for (i = 0; i < EX_NUPD; i++) { sc->sc_rxdescs[i].rx_dmamap = sc->sc_rx_dmamaps[i]; sc->sc_rxdescs[i].rx_upd = &sc->sc_upd[i]; sc->sc_upd[i].upd_frags[0].fr_len = htole32((MCLBYTES - 2) | EX_FR_LAST); if (ex_add_rxbuf(sc, &sc->sc_rxdescs[i]) != 0) { aprint_error_dev(sc->sc_dev, "can't allocate or map rx buffers\n"); goto fail; } } bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap, 0, EX_NUPD * sizeof (struct ex_upd), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); ex_init_txdescs(sc); attach_stage = 11; GO_WINDOW(3); val = bus_space_read_2(iot, ioh, ELINK_W3_RESET_OPTIONS); if (val & ELINK_MEDIACAP_MII) sc->ex_conf |= EX_CONF_MII; ifp = &sc->sc_ethercom.ec_if; /* * Initialize our media structures and MII info. We'll * probe the MII if we discover that we have one. */ sc->ex_mii.mii_ifp = ifp; sc->ex_mii.mii_readreg = ex_mii_readreg; sc->ex_mii.mii_writereg = ex_mii_writereg; sc->ex_mii.mii_statchg = ex_mii_statchg; ifmedia_init(&sc->ex_mii.mii_media, IFM_IMASK, ex_media_chg, ex_media_stat); if (sc->ex_conf & EX_CONF_MII) { /* * Find PHY, extract media information from it. * First, select the right transceiver. */ ex_set_xcvr(sc, val); mii_attach(sc->sc_dev, &sc->ex_mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0); if (LIST_FIRST(&sc->ex_mii.mii_phys) == NULL) { ifmedia_add(&sc->ex_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(&sc->ex_mii.mii_media, IFM_ETHER|IFM_NONE); } else { ifmedia_set(&sc->ex_mii.mii_media, IFM_ETHER|IFM_AUTO); } } else ex_probemedia(sc); strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); ifp->if_softc = sc; ifp->if_start = ex_start; ifp->if_ioctl = ex_ioctl; ifp->if_watchdog = ex_watchdog; ifp->if_init = ex_init; ifp->if_stop = ex_stop; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST; sc->sc_if_flags = ifp->if_flags; IFQ_SET_READY(&ifp->if_snd); /* * We can support 802.1Q VLAN-sized frames. */ sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; /* * The 3c90xB has hardware IPv4/TCPv4/UDPv4 checksum support. */ if (sc->ex_conf & EX_CONF_90XB) sc->sc_ethercom.ec_if.if_capabilities |= IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx | IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx; if_attach(ifp); ether_ifattach(ifp, macaddr); ether_set_ifflags_cb(&sc->sc_ethercom, ex_ifflags_cb); GO_WINDOW(1); sc->tx_start_thresh = 20; sc->tx_succ_ok = 0; /* TODO: set queues to 0 */ rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev), RND_TYPE_NET, RND_FLAG_DEFAULT); if (pmf_device_register1(sc->sc_dev, NULL, NULL, ex_shutdown)) pmf_class_network_register(sc->sc_dev, &sc->sc_ethercom.ec_if); else aprint_error_dev(sc->sc_dev, "couldn't establish power handler\n"); /* The attach is successful. */ sc->ex_flags |= EX_FLAGS_ATTACHED; return; fail: /* * Free any resources we've allocated during the failed attach * attempt. Do this in reverse order and fall though. */ switch (attach_stage) { case 11: { struct ex_rxdesc *rxd; for (i = 0; i < EX_NUPD; i++) { rxd = &sc->sc_rxdescs[i]; if (rxd->rx_mbhead != NULL) { bus_dmamap_unload(sc->sc_dmat, rxd->rx_dmamap); m_freem(rxd->rx_mbhead); } } } /* FALLTHROUGH */ case 10: for (i = 0; i < EX_NUPD; i++) bus_dmamap_destroy(sc->sc_dmat, sc->sc_rx_dmamaps[i]); /* FALLTHROUGH */ case 9: for (i = 0; i < EX_NDPD; i++) bus_dmamap_destroy(sc->sc_dmat, sc->sc_tx_dmamaps[i]); /* FALLTHROUGH */ case 8: bus_dmamap_unload(sc->sc_dmat, sc->sc_dpd_dmamap); /* FALLTHROUGH */ case 7: bus_dmamap_destroy(sc->sc_dmat, sc->sc_dpd_dmamap); /* FALLTHROUGH */ case 6: bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_dpd, EX_NDPD * sizeof (struct ex_dpd)); /* FALLTHROUGH */ case 5: bus_dmamem_free(sc->sc_dmat, &sc->sc_dseg, sc->sc_drseg); break; case 4: bus_dmamap_unload(sc->sc_dmat, sc->sc_upd_dmamap); /* FALLTHROUGH */ case 3: bus_dmamap_destroy(sc->sc_dmat, sc->sc_upd_dmamap); /* FALLTHROUGH */ case 2: bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_upd, EX_NUPD * sizeof (struct ex_upd)); /* FALLTHROUGH */ case 1: bus_dmamem_free(sc->sc_dmat, &sc->sc_useg, sc->sc_urseg); break; } } /* * Find the media present on non-MII chips. */ void ex_probemedia(struct ex_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct ifmedia *ifm = &sc->ex_mii.mii_media; struct ex_media *exm; uint16_t config1, reset_options, default_media; int defmedia = 0; const char *sep = "", *defmedianame = NULL; GO_WINDOW(3); config1 = bus_space_read_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG + 2); reset_options = bus_space_read_1(iot, ioh, ELINK_W3_RESET_OPTIONS); GO_WINDOW(0); default_media = (config1 & CONFIG_MEDIAMASK) >> CONFIG_MEDIAMASK_SHIFT; /* Sanity check that there are any media! */ if ((reset_options & ELINK_PCI_MEDIAMASK) == 0) { aprint_error_dev(sc->sc_dev, "no media present!\n"); ifmedia_add(ifm, IFM_ETHER|IFM_NONE, 0, NULL); ifmedia_set(ifm, IFM_ETHER|IFM_NONE); return; } aprint_normal_dev(sc->sc_dev, ""); #define PRINT(str) aprint_normal("%s%s", sep, str); sep = ", " for (exm = ex_native_media; exm->exm_name != NULL; exm++) { if (reset_options & exm->exm_mpbit) { /* * Default media is a little complicated. We * support full-duplex which uses the same * reset options bit. * * XXX Check EEPROM for default to FDX? */ if (exm->exm_epmedia == default_media) { if ((exm->exm_ifmedia & IFM_FDX) == 0) { defmedia = exm->exm_ifmedia; defmedianame = exm->exm_name; } } else if (defmedia == 0) { defmedia = exm->exm_ifmedia; defmedianame = exm->exm_name; } ifmedia_add(ifm, exm->exm_ifmedia, exm->exm_epmedia, NULL); PRINT(exm->exm_name); } } #undef PRINT #ifdef DIAGNOSTIC if (defmedia == 0) panic("ex_probemedia: impossible"); #endif aprint_normal(", default %s\n", defmedianame); ifmedia_set(ifm, defmedia); } /* * Setup transmitter parameters. */ static void ex_setup_tx(struct ex_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; /* * Disable reclaim threshold for 90xB, set free threshold to * 6 * 256 = 1536 for 90x. */ if (sc->ex_conf & EX_CONF_90XB) bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_TXRECLTHRESH | 255); else bus_space_write_1(iot, ioh, ELINK_TXFREETHRESH, 6); /* Setup early transmission start threshold. */ bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_TXSTARTTHRESH | sc->tx_start_thresh); } /* * Bring device up. */ int ex_init(struct ifnet *ifp) { struct ex_softc *sc = ifp->if_softc; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int i; uint16_t val; int error = 0; if ((error = ex_enable(sc)) != 0) goto out; ex_waitcmd(sc); ex_stop(ifp, 0); GO_WINDOW(2); /* Turn on PHY power. */ if (sc->ex_conf & (EX_CONF_PHY_POWER | EX_CONF_INV_LED_POLARITY)) { val = bus_space_read_2(iot, ioh, ELINK_W2_RESET_OPTIONS); if (sc->ex_conf & EX_CONF_PHY_POWER) val |= ELINK_RESET_OPT_PHYPOWER; /* turn on PHY power */ if (sc->ex_conf & EX_CONF_INV_LED_POLARITY) val |= ELINK_RESET_OPT_LEDPOLAR; /* invert LED polarity */ bus_space_write_2(iot, ioh, ELINK_W2_RESET_OPTIONS, val); } /* * Set the station address and clear the station mask. The latter * is needed for 90x cards, 0 is the default for 90xB cards. */ for (i = 0; i < ETHER_ADDR_LEN; i++) { bus_space_write_1(iot, ioh, ELINK_W2_ADDR_0 + i, CLLADDR(ifp->if_sadl)[i]); bus_space_write_1(iot, ioh, ELINK_W2_RECVMASK_0 + i, 0); } GO_WINDOW(3); bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_RESET); ex_waitcmd(sc); bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_RESET); ex_waitcmd(sc); /* Load Tx parameters. */ ex_setup_tx(sc); bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_RX_EARLY_THRESH | ELINK_THRESH_DISABLE); bus_space_write_4(iot, ioh, ELINK_DMACTRL, bus_space_read_4(iot, ioh, ELINK_DMACTRL) | ELINK_DMAC_UPRXEAREN); bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_RD_0_MASK | XL_WATCHED_INTERRUPTS); bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_INTR_MASK | XL_WATCHED_INTERRUPTS); bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | 0xff); if (sc->intr_ack) (* sc->intr_ack)(sc); ex_set_media(sc); ex_set_mc(sc); bus_space_write_2(iot, ioh, ELINK_COMMAND, STATS_ENABLE); bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_ENABLE); bus_space_write_4(iot, ioh, ELINK_UPLISTPTR, sc->sc_upddma); bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_ENABLE); bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_UPUNSTALL); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; ex_start(ifp); sc->sc_if_flags = ifp->if_flags; GO_WINDOW(1); callout_reset(&sc->ex_mii_callout, hz, ex_tick, sc); out: if (error) { ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); ifp->if_timer = 0; aprint_error_dev(sc->sc_dev, "interface not running\n"); } return (error); } #define MCHASHSIZE 256 #define ex_mchash(addr) (ether_crc32_be((addr), ETHER_ADDR_LEN) & \ (MCHASHSIZE - 1)) /* * Set multicast receive filter. Also take care of promiscuous mode * here (XXX). */ void ex_set_mc(struct ex_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ethercom *ec = &sc->sc_ethercom; struct ether_multi *enm; struct ether_multistep estep; int i; uint16_t mask = FIL_INDIVIDUAL | FIL_BRDCST; if (ifp->if_flags & IFF_PROMISC) { mask |= FIL_PROMISC; goto allmulti; } ETHER_FIRST_MULTI(estep, ec, enm); if (enm == NULL) goto nomulti; if ((sc->ex_conf & EX_CONF_90XB) == 0) /* No multicast hash filtering. */ goto allmulti; for (i = 0; i < MCHASHSIZE; i++) bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND, ELINK_CLEARHASHFILBIT | i); do { if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN) != 0) goto allmulti; i = ex_mchash(enm->enm_addrlo); bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND, ELINK_SETHASHFILBIT | i); ETHER_NEXT_MULTI(estep, enm); } while (enm != NULL); mask |= FIL_MULTIHASH; nomulti: ifp->if_flags &= ~IFF_ALLMULTI; bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND, SET_RX_FILTER | mask); return; allmulti: ifp->if_flags |= IFF_ALLMULTI; mask |= FIL_MULTICAST; bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND, SET_RX_FILTER | mask); } /* * The Tx Complete interrupts occur only on errors, * and this is the error handler. */ static void ex_txstat(struct ex_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int i, err = 0; /* * We need to read+write TX_STATUS until we get a 0 status * in order to turn off the interrupt flag. * ELINK_TXSTATUS is in the upper byte of 2 with ELINK_TIMER. */ for (;;) { i = bus_space_read_2(iot, ioh, ELINK_TIMER); if ((i & TXS_COMPLETE) == 0) break; bus_space_write_2(iot, ioh, ELINK_TIMER, 0x0); err |= i; } err &= ~TXS_TIMER; if ((err & (TXS_UNDERRUN | TXS_JABBER | TXS_RECLAIM)) || err == 0 /* should not happen, just in case */) { /* * Make sure the transmission is stopped. */ bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_DNSTALL); for (i = 1000; i > 0; i--) if ((bus_space_read_4(iot, ioh, ELINK_DMACTRL) & ELINK_DMAC_DNINPROG) == 0) break; /* * Reset the transmitter. */ bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_RESET); /* Resetting takes a while and we will do more than wait. */ ifp->if_flags &= ~IFF_OACTIVE; ++sc->sc_ethercom.ec_if.if_oerrors; aprint_error_dev(sc->sc_dev, "%s%s%s", (err & TXS_UNDERRUN) ? " transmit underrun" : "", (err & TXS_JABBER) ? " jabber" : "", (err & TXS_RECLAIM) ? " reclaim" : ""); if (err == 0) aprint_error(" unknown Tx error"); printf(" (%x)", err); if (err & TXS_UNDERRUN) { aprint_error(" @%d", sc->tx_start_thresh); if (sc->tx_succ_ok < 256 && (i = min(ETHER_MAX_LEN, sc->tx_start_thresh + 20)) > sc->tx_start_thresh) { aprint_error(", new threshold is %d", i); sc->tx_start_thresh = i; } sc->tx_succ_ok = 0; } aprint_error("\n"); if (err & TXS_MAX_COLLISION) ++sc->sc_ethercom.ec_if.if_collisions; /* Wait for TX_RESET to finish. */ ex_waitcmd(sc); /* Reload Tx parameters. */ ex_setup_tx(sc); } else { if (err & TXS_MAX_COLLISION) ++sc->sc_ethercom.ec_if.if_collisions; sc->sc_ethercom.ec_if.if_flags &= ~IFF_OACTIVE; } bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_ENABLE); /* Retransmit current packet if any. */ if (sc->tx_head) { ifp->if_flags |= IFF_OACTIVE; bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_DNUNSTALL); bus_space_write_4(iot, ioh, ELINK_DNLISTPTR, DPD_DMADDR(sc, sc->tx_head)); /* Retrigger watchdog if stopped. */ if (ifp->if_timer == 0) ifp->if_timer = 1; } } int ex_media_chg(struct ifnet *ifp) { if (ifp->if_flags & IFF_UP) ex_init(ifp); return 0; } void ex_set_xcvr(struct ex_softc *sc, const uint16_t media) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; uint32_t icfg; /* * We're already in Window 3 */ icfg = bus_space_read_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG); icfg &= ~(CONFIG_XCVR_SEL << 16); if (media & (ELINK_MEDIACAP_MII | ELINK_MEDIACAP_100BASET4)) icfg |= ELINKMEDIA_MII << (CONFIG_XCVR_SEL_SHIFT + 16); if (media & ELINK_MEDIACAP_100BASETX) icfg |= ELINKMEDIA_AUTO << (CONFIG_XCVR_SEL_SHIFT + 16); if (media & ELINK_MEDIACAP_100BASEFX) icfg |= ELINKMEDIA_100BASE_FX << (CONFIG_XCVR_SEL_SHIFT + 16); bus_space_write_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG, icfg); } void ex_set_media(struct ex_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; uint32_t configreg; if (((sc->ex_conf & EX_CONF_MII) && (sc->ex_mii.mii_media_active & IFM_FDX)) || (!(sc->ex_conf & EX_CONF_MII) && (sc->ex_mii.mii_media.ifm_media & IFM_FDX))) { bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, MAC_CONTROL_FDX); } else { bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, 0); } /* * If the device has MII, select it, and then tell the * PHY which media to use. */ if (sc->ex_conf & EX_CONF_MII) { uint16_t val; GO_WINDOW(3); val = bus_space_read_2(iot, ioh, ELINK_W3_RESET_OPTIONS); ex_set_xcvr(sc, val); mii_mediachg(&sc->ex_mii); return; } GO_WINDOW(4); bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, 0); bus_space_write_2(iot, ioh, ELINK_COMMAND, STOP_TRANSCEIVER); delay(800); /* * Now turn on the selected media/transceiver. */ switch (IFM_SUBTYPE(sc->ex_mii.mii_media.ifm_cur->ifm_media)) { case IFM_10_T: bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, JABBER_GUARD_ENABLE|LINKBEAT_ENABLE); break; case IFM_10_2: bus_space_write_2(iot, ioh, ELINK_COMMAND, START_TRANSCEIVER); DELAY(800); break; case IFM_100_TX: case IFM_100_FX: bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, LINKBEAT_ENABLE); DELAY(800); break; case IFM_10_5: bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, SQE_ENABLE); DELAY(800); break; case IFM_MANUAL: break; case IFM_NONE: return; default: panic("ex_set_media: impossible"); } GO_WINDOW(3); configreg = bus_space_read_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG); configreg &= ~(CONFIG_MEDIAMASK << 16); configreg |= (sc->ex_mii.mii_media.ifm_cur->ifm_data << (CONFIG_MEDIAMASK_SHIFT + 16)); bus_space_write_4(iot, ioh, ELINK_W3_INTERNAL_CONFIG, configreg); } /* * Get currently-selected media from card. * (if_media callback, may be called before interface is brought up). */ void ex_media_stat(struct ifnet *ifp, struct ifmediareq *req) { struct ex_softc *sc = ifp->if_softc; uint16_t help; if ((ifp->if_flags & (IFF_UP|IFF_RUNNING)) == (IFF_UP|IFF_RUNNING)) { if (sc->ex_conf & EX_CONF_MII) { mii_pollstat(&sc->ex_mii); req->ifm_status = sc->ex_mii.mii_media_status; req->ifm_active = sc->ex_mii.mii_media_active; } else { GO_WINDOW(4); req->ifm_status = IFM_AVALID; req->ifm_active = sc->ex_mii.mii_media.ifm_cur->ifm_media; help = bus_space_read_2(sc->sc_iot, sc->sc_ioh, ELINK_W4_MEDIA_TYPE); if (help & LINKBEAT_DETECT) req->ifm_status |= IFM_ACTIVE; GO_WINDOW(1); } } } /* * Start outputting on the interface. */ static void ex_start(struct ifnet *ifp) { struct ex_softc *sc = ifp->if_softc; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; volatile struct ex_fraghdr *fr = NULL; volatile struct ex_dpd *dpd = NULL, *prevdpd = NULL; struct ex_txdesc *txp; struct mbuf *mb_head; bus_dmamap_t dmamap; int m_csumflags, offset, seglen, totlen, segment, error; uint32_t csum_flags; if (sc->tx_head || sc->tx_free == NULL) return; txp = NULL; /* * We're finished if there is nothing more to add to the list or if * we're all filled up with buffers to transmit. */ while (sc->tx_free != NULL) { /* * Grab a packet to transmit. */ IFQ_DEQUEUE(&ifp->if_snd, mb_head); if (mb_head == NULL) break; /* * mb_head might be updated later, * so preserve csum_flags here. */ m_csumflags = mb_head->m_pkthdr.csum_flags; /* * Get pointer to next available tx desc. */ txp = sc->tx_free; dmamap = txp->tx_dmamap; /* * Go through each of the mbufs in the chain and initialize * the transmit buffer descriptors with the physical address * and size of the mbuf. */ reload: error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, mb_head, BUS_DMA_WRITE|BUS_DMA_NOWAIT); switch (error) { case 0: /* Success. */ break; case EFBIG: { struct mbuf *mn; /* * We ran out of segments. We have to recopy this * mbuf chain first. Bail out if we can't get the * new buffers. */ aprint_error_dev(sc->sc_dev, "too many segments, "); MGETHDR(mn, M_DONTWAIT, MT_DATA); if (mn == NULL) { m_freem(mb_head); aprint_error("aborting\n"); goto out; } if (mb_head->m_pkthdr.len > MHLEN) { MCLGET(mn, M_DONTWAIT); if ((mn->m_flags & M_EXT) == 0) { m_freem(mn); m_freem(mb_head); aprint_error("aborting\n"); goto out; } } m_copydata(mb_head, 0, mb_head->m_pkthdr.len, mtod(mn, void *)); mn->m_pkthdr.len = mn->m_len = mb_head->m_pkthdr.len; m_freem(mb_head); mb_head = mn; aprint_error("retrying\n"); goto reload; } default: /* * Some other problem; report it. */ aprint_error_dev(sc->sc_dev, "can't load mbuf chain, error = %d\n", error); m_freem(mb_head); goto out; } /* * remove our tx desc from freelist. */ sc->tx_free = txp->tx_next; txp->tx_next = NULL; fr = &txp->tx_dpd->dpd_frags[0]; totlen = 0; for (segment = 0; segment < dmamap->dm_nsegs; segment++, fr++) { fr->fr_addr = htole32(dmamap->dm_segs[segment].ds_addr); seglen = dmamap->dm_segs[segment].ds_len; fr->fr_len = htole32(seglen); totlen += seglen; } if (__predict_false(totlen <= EX_IP4CSUMTX_PADLEN && (m_csumflags & M_CSUM_IPv4) != 0)) { /* * Pad short packets to avoid ip4csum-tx bug. * * XXX Should we still consider if such short * (36 bytes or less) packets might already * occupy EX_NTFRAG (== 32) fragments here? */ KASSERT(segment < EX_NTFRAGS); fr->fr_addr = htole32(DPDMEMPAD_DMADDR(sc)); seglen = EX_IP4CSUMTX_PADLEN + 1 - totlen; fr->fr_len = htole32(EX_FR_LAST | seglen); totlen += seglen; } else { fr--; fr->fr_len |= htole32(EX_FR_LAST); } txp->tx_mbhead = mb_head; bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, BUS_DMASYNC_PREWRITE); dpd = txp->tx_dpd; dpd->dpd_nextptr = 0; dpd->dpd_fsh = htole32(totlen); /* Byte-swap constants so compiler can optimize. */ if (sc->ex_conf & EX_CONF_90XB) { csum_flags = 0; if (m_csumflags & M_CSUM_IPv4) csum_flags |= htole32(EX_DPD_IPCKSUM); if (m_csumflags & M_CSUM_TCPv4) csum_flags |= htole32(EX_DPD_TCPCKSUM); else if (m_csumflags & M_CSUM_UDPv4) csum_flags |= htole32(EX_DPD_UDPCKSUM); dpd->dpd_fsh |= csum_flags; } else { KDASSERT((mb_head->m_pkthdr.csum_flags & (M_CSUM_IPv4|M_CSUM_TCPv4|M_CSUM_UDPv4)) == 0); } bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, ((const char *)(intptr_t)dpd - (const char *)sc->sc_dpd), sizeof (struct ex_dpd), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); /* * No need to stall the download engine, we know it's * not busy right now. * * Fix up pointers in both the "soft" tx and the physical * tx list. */ if (sc->tx_head != NULL) { prevdpd = sc->tx_tail->tx_dpd; offset = ((const char *)(intptr_t)prevdpd - (const char *)sc->sc_dpd); bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, offset, sizeof (struct ex_dpd), BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); prevdpd->dpd_nextptr = htole32(DPD_DMADDR(sc, txp)); bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, offset, sizeof (struct ex_dpd), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); sc->tx_tail->tx_next = txp; sc->tx_tail = txp; } else { sc->tx_tail = sc->tx_head = txp; } /* * Pass packet to bpf if there is a listener. */ bpf_mtap(ifp, mb_head); } out: if (sc->tx_head) { sc->tx_tail->tx_dpd->dpd_fsh |= htole32(EX_DPD_DNIND); bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, ((char *)sc->tx_tail->tx_dpd - (char *)sc->sc_dpd), sizeof (struct ex_dpd), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); ifp->if_flags |= IFF_OACTIVE; bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_DNUNSTALL); bus_space_write_4(iot, ioh, ELINK_DNLISTPTR, DPD_DMADDR(sc, sc->tx_head)); /* trigger watchdog */ ifp->if_timer = 5; } } int ex_intr(void *arg) { struct ex_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; uint16_t stat; int ret = 0; struct ifnet *ifp = &sc->sc_ethercom.ec_if; if ((ifp->if_flags & IFF_RUNNING) == 0 || !device_is_active(sc->sc_dev)) return (0); for (;;) { stat = bus_space_read_2(iot, ioh, ELINK_STATUS); if ((stat & XL_WATCHED_INTERRUPTS) == 0) { if ((stat & INTR_LATCH) == 0) { #if 0 aprint_error_dev(sc->sc_dev, "intr latch cleared\n"); #endif break; } } ret = 1; /* * Acknowledge interrupts. */ bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | (stat & (XL_WATCHED_INTERRUPTS | INTR_LATCH))); if (sc->intr_ack) (*sc->intr_ack)(sc); if (stat & HOST_ERROR) { aprint_error_dev(sc->sc_dev, "adapter failure (%x)\n", stat); ex_reset(sc); ex_init(ifp); return 1; } if (stat & UPD_STATS) { ex_getstats(sc); } if (stat & TX_COMPLETE) { ex_txstat(sc); #if 0 if (stat & DN_COMPLETE) aprint_error_dev(sc->sc_dev, "Ignoring Dn interrupt (%x)\n", stat); #endif /* * In some rare cases, both Tx Complete and * Dn Complete bits are set. However, the packet * has been reloaded in ex_txstat() and should not * handle the Dn Complete event here. * Hence the "else" below. */ } else if (stat & DN_COMPLETE) { struct ex_txdesc *txp, *ptxp = NULL; bus_dmamap_t txmap; /* reset watchdog timer, was set in ex_start() */ ifp->if_timer = 0; for (txp = sc->tx_head; txp != NULL; txp = txp->tx_next) { bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, (char *)txp->tx_dpd - (char *)sc->sc_dpd, sizeof (struct ex_dpd), BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); if (txp->tx_mbhead != NULL) { txmap = txp->tx_dmamap; bus_dmamap_sync(sc->sc_dmat, txmap, 0, txmap->dm_mapsize, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sc_dmat, txmap); m_freem(txp->tx_mbhead); txp->tx_mbhead = NULL; } ptxp = txp; } /* * Move finished tx buffers back to the tx free list. */ if (sc->tx_free) { sc->tx_ftail->tx_next = sc->tx_head; sc->tx_ftail = ptxp; } else sc->tx_ftail = sc->tx_free = sc->tx_head; sc->tx_head = sc->tx_tail = NULL; ifp->if_flags &= ~IFF_OACTIVE; if (sc->tx_succ_ok < 256) sc->tx_succ_ok++; } if (stat & UP_COMPLETE) { struct ex_rxdesc *rxd; struct mbuf *m; struct ex_upd *upd; bus_dmamap_t rxmap; uint32_t pktstat; rcvloop: rxd = sc->rx_head; rxmap = rxd->rx_dmamap; m = rxd->rx_mbhead; upd = rxd->rx_upd; bus_dmamap_sync(sc->sc_dmat, rxmap, 0, rxmap->dm_mapsize, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap, ((char *)upd - (char *)sc->sc_upd), sizeof (struct ex_upd), BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); pktstat = le32toh(upd->upd_pktstatus); if (pktstat & EX_UPD_COMPLETE) { /* * Remove first packet from the chain. */ sc->rx_head = rxd->rx_next; rxd->rx_next = NULL; /* * Add a new buffer to the receive chain. * If this fails, the old buffer is recycled * instead. */ if (ex_add_rxbuf(sc, rxd) == 0) { uint16_t total_len; if (pktstat & ((sc->sc_ethercom.ec_capenable & ETHERCAP_VLAN_MTU) ? EX_UPD_ERR_VLAN : EX_UPD_ERR)) { ifp->if_ierrors++; m_freem(m); goto rcvloop; } total_len = pktstat & EX_UPD_PKTLENMASK; if (total_len < sizeof(struct ether_header)) { m_freem(m); goto rcvloop; } m_set_rcvif(m, ifp); m->m_pkthdr.len = m->m_len = total_len; bpf_mtap(ifp, m); /* * Set the incoming checksum information for the packet. */ if ((sc->ex_conf & EX_CONF_90XB) != 0 && (pktstat & EX_UPD_IPCHECKED) != 0) { m->m_pkthdr.csum_flags |= M_CSUM_IPv4; if (pktstat & EX_UPD_IPCKSUMERR) m->m_pkthdr.csum_flags |= M_CSUM_IPv4_BAD; if (pktstat & EX_UPD_TCPCHECKED) { m->m_pkthdr.csum_flags |= M_CSUM_TCPv4; if (pktstat & EX_UPD_TCPCKSUMERR) m->m_pkthdr.csum_flags |= M_CSUM_TCP_UDP_BAD; } else if (pktstat & EX_UPD_UDPCHECKED) { m->m_pkthdr.csum_flags |= M_CSUM_UDPv4; if (pktstat & EX_UPD_UDPCKSUMERR) m->m_pkthdr.csum_flags |= M_CSUM_TCP_UDP_BAD; } } if_percpuq_enqueue(ifp->if_percpuq, m); } goto rcvloop; } /* * Just in case we filled up all UPDs and the DMA engine * stalled. We could be more subtle about this. */ if (bus_space_read_4(iot, ioh, ELINK_UPLISTPTR) == 0) { aprint_error_dev(sc->sc_dev, "uplistptr was 0\n"); ex_init(ifp); } else if (bus_space_read_4(iot, ioh, ELINK_UPPKTSTATUS) & 0x2000) { aprint_error_dev(sc->sc_dev, "receive stalled\n"); bus_space_write_2(iot, ioh, ELINK_COMMAND, ELINK_UPUNSTALL); } } if (stat) rnd_add_uint32(&sc->rnd_source, stat); } /* no more interrupts */ if (ret && IFQ_IS_EMPTY(&ifp->if_snd) == 0) ex_start(ifp); return ret; } static int ex_ifflags_cb(struct ethercom *ec) { struct ifnet *ifp = &ec->ec_if; struct ex_softc *sc = ifp->if_softc; int change = ifp->if_flags ^ sc->sc_if_flags; if ((change & ~(IFF_CANTCHANGE|IFF_DEBUG)) != 0) return ENETRESET; else if ((change & IFF_PROMISC) != 0) ex_set_mc(sc); return 0; } int ex_ioctl(struct ifnet *ifp, u_long cmd, void *data) { struct ex_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *)data; int s, error; s = splnet(); switch (cmd) { case SIOCSIFMEDIA: case SIOCGIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &sc->ex_mii.mii_media, cmd); break; default: if ((error = ether_ioctl(ifp, cmd, data)) != ENETRESET) break; error = 0; if (cmd != SIOCADDMULTI && cmd != SIOCDELMULTI) ; else if (ifp->if_flags & IFF_RUNNING) { /* * Multicast list has changed; set the hardware filter * accordingly. */ ex_set_mc(sc); } break; } sc->sc_if_flags = ifp->if_flags; splx(s); return (error); } void ex_getstats(struct ex_softc *sc) { bus_space_handle_t ioh = sc->sc_ioh; bus_space_tag_t iot = sc->sc_iot; struct ifnet *ifp = &sc->sc_ethercom.ec_if; uint8_t upperok; GO_WINDOW(6); upperok = bus_space_read_1(iot, ioh, UPPER_FRAMES_OK); ifp->if_ipackets += bus_space_read_1(iot, ioh, RX_FRAMES_OK); ifp->if_ipackets += (upperok & 0x03) << 8; ifp->if_opackets += bus_space_read_1(iot, ioh, TX_FRAMES_OK); ifp->if_opackets += (upperok & 0x30) << 4; ifp->if_ierrors += bus_space_read_1(iot, ioh, RX_OVERRUNS); ifp->if_collisions += bus_space_read_1(iot, ioh, TX_COLLISIONS); /* * There seems to be no way to get the exact number of collisions, * this is the number that occurred at the very least. */ ifp->if_collisions += 2 * bus_space_read_1(iot, ioh, TX_AFTER_X_COLLISIONS); /* * Interface byte counts are counted by ether_input() and * ether_output(), so don't accumulate them here. Just * read the NIC counters so they don't generate overflow interrupts. * Upper byte counters are latched from reading the totals, so * they don't need to be read if we don't need their values. */ (void)bus_space_read_2(iot, ioh, RX_TOTAL_OK); (void)bus_space_read_2(iot, ioh, TX_TOTAL_OK); /* * Clear the following to avoid stats overflow interrupts */ (void)bus_space_read_1(iot, ioh, TX_DEFERRALS); (void)bus_space_read_1(iot, ioh, TX_AFTER_1_COLLISION); (void)bus_space_read_1(iot, ioh, TX_NO_SQE); (void)bus_space_read_1(iot, ioh, TX_CD_LOST); GO_WINDOW(4); (void)bus_space_read_1(iot, ioh, ELINK_W4_BADSSD); GO_WINDOW(1); } void ex_printstats(struct ex_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; ex_getstats(sc); printf("in %llu out %llu ierror %llu oerror %llu ibytes %llu obytes " "%llu\n", (unsigned long long)ifp->if_ipackets, (unsigned long long)ifp->if_opackets, (unsigned long long)ifp->if_ierrors, (unsigned long long)ifp->if_oerrors, (unsigned long long)ifp->if_ibytes, (unsigned long long)ifp->if_obytes); } void ex_tick(void *arg) { struct ex_softc *sc = arg; int s; if (!device_is_active(sc->sc_dev)) return; s = splnet(); if (sc->ex_conf & EX_CONF_MII) mii_tick(&sc->ex_mii); if (!(bus_space_read_2((sc)->sc_iot, (sc)->sc_ioh, ELINK_STATUS) & COMMAND_IN_PROGRESS)) ex_getstats(sc); splx(s); callout_reset(&sc->ex_mii_callout, hz, ex_tick, sc); } void ex_reset(struct ex_softc *sc) { uint16_t val = GLOBAL_RESET; if (sc->ex_conf & EX_CONF_RESETHACK) val |= 0x10; bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND, val); /* * XXX apparently the command in progress bit can't be trusted * during a reset, so we just always wait this long. Fortunately * we normally only reset the chip during autoconfig. */ delay(100000); ex_waitcmd(sc); } void ex_watchdog(struct ifnet *ifp) { struct ex_softc *sc = ifp->if_softc; log(LOG_ERR, "%s: device timeout\n", device_xname(sc->sc_dev)); ++sc->sc_ethercom.ec_if.if_oerrors; ex_reset(sc); ex_init(ifp); } void ex_stop(struct ifnet *ifp, int disable) { struct ex_softc *sc = ifp->if_softc; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; struct ex_txdesc *tx; struct ex_rxdesc *rx; int i; bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_DISABLE); bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_DISABLE); bus_space_write_2(iot, ioh, ELINK_COMMAND, STOP_TRANSCEIVER); for (tx = sc->tx_head ; tx != NULL; tx = tx->tx_next) { if (tx->tx_mbhead == NULL) continue; m_freem(tx->tx_mbhead); tx->tx_mbhead = NULL; bus_dmamap_unload(sc->sc_dmat, tx->tx_dmamap); tx->tx_dpd->dpd_fsh = tx->tx_dpd->dpd_nextptr = 0; bus_dmamap_sync(sc->sc_dmat, sc->sc_dpd_dmamap, ((char *)tx->tx_dpd - (char *)sc->sc_dpd), sizeof (struct ex_dpd), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); } sc->tx_tail = sc->tx_head = NULL; ex_init_txdescs(sc); sc->rx_tail = sc->rx_head = 0; for (i = 0; i < EX_NUPD; i++) { rx = &sc->sc_rxdescs[i]; if (rx->rx_mbhead != NULL) { bus_dmamap_unload(sc->sc_dmat, rx->rx_dmamap); m_freem(rx->rx_mbhead); rx->rx_mbhead = NULL; } ex_add_rxbuf(sc, rx); } bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | INTR_LATCH); callout_stop(&sc->ex_mii_callout); if (sc->ex_conf & EX_CONF_MII) mii_down(&sc->ex_mii); if (disable) ex_disable(sc); ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); sc->sc_if_flags = ifp->if_flags; ifp->if_timer = 0; } static void ex_init_txdescs(struct ex_softc *sc) { int i; for (i = 0; i < EX_NDPD; i++) { sc->sc_txdescs[i].tx_dmamap = sc->sc_tx_dmamaps[i]; sc->sc_txdescs[i].tx_dpd = &sc->sc_dpd[i]; if (i < EX_NDPD - 1) sc->sc_txdescs[i].tx_next = &sc->sc_txdescs[i + 1]; else sc->sc_txdescs[i].tx_next = NULL; } sc->tx_free = &sc->sc_txdescs[0]; sc->tx_ftail = &sc->sc_txdescs[EX_NDPD-1]; } int ex_activate(device_t self, enum devact act) { struct ex_softc *sc = device_private(self); switch (act) { case DVACT_DEACTIVATE: if_deactivate(&sc->sc_ethercom.ec_if); return 0; default: return EOPNOTSUPP; } } int ex_detach(struct ex_softc *sc) { struct ifnet *ifp = &sc->sc_ethercom.ec_if; struct ex_rxdesc *rxd; int i, s; /* Succeed now if there's no work to do. */ if ((sc->ex_flags & EX_FLAGS_ATTACHED) == 0) return (0); s = splnet(); /* Stop the interface. Callouts are stopped in it. */ ex_stop(ifp, 1); splx(s); /* Destroy our callout. */ callout_destroy(&sc->ex_mii_callout); if (sc->ex_conf & EX_CONF_MII) { /* Detach all PHYs */ mii_detach(&sc->ex_mii, MII_PHY_ANY, MII_OFFSET_ANY); } /* Delete all remaining media. */ ifmedia_delete_instance(&sc->ex_mii.mii_media, IFM_INST_ANY); rnd_detach_source(&sc->rnd_source); ether_ifdetach(ifp); if_detach(ifp); for (i = 0; i < EX_NUPD; i++) { rxd = &sc->sc_rxdescs[i]; if (rxd->rx_mbhead != NULL) { bus_dmamap_unload(sc->sc_dmat, rxd->rx_dmamap); m_freem(rxd->rx_mbhead); rxd->rx_mbhead = NULL; } } for (i = 0; i < EX_NUPD; i++) bus_dmamap_destroy(sc->sc_dmat, sc->sc_rx_dmamaps[i]); for (i = 0; i < EX_NDPD; i++) bus_dmamap_destroy(sc->sc_dmat, sc->sc_tx_dmamaps[i]); bus_dmamap_unload(sc->sc_dmat, sc->sc_dpd_dmamap); bus_dmamap_destroy(sc->sc_dmat, sc->sc_dpd_dmamap); bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_dpd, EX_NDPD * sizeof (struct ex_dpd)); bus_dmamem_free(sc->sc_dmat, &sc->sc_dseg, sc->sc_drseg); bus_dmamap_unload(sc->sc_dmat, sc->sc_upd_dmamap); bus_dmamap_destroy(sc->sc_dmat, sc->sc_upd_dmamap); bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_upd, EX_NUPD * sizeof (struct ex_upd)); bus_dmamem_free(sc->sc_dmat, &sc->sc_useg, sc->sc_urseg); pmf_device_deregister(sc->sc_dev); return (0); } /* * Before reboots, reset card completely. */ static bool ex_shutdown(device_t self, int flags) { struct ex_softc *sc = device_private(self); ex_stop(&sc->sc_ethercom.ec_if, 1); /* * Make sure the interface is powered up when we reboot, * otherwise firmware on some systems gets really confused. */ (void) ex_enable(sc); return true; } /* * Read EEPROM data. * XXX what to do if EEPROM doesn't unbusy? */ uint16_t ex_read_eeprom(struct ex_softc *sc, int offset) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; uint16_t data = 0, cmd = READ_EEPROM; int off; off = sc->ex_conf & EX_CONF_EEPROM_OFF ? 0x30 : 0; cmd = sc->ex_conf & EX_CONF_EEPROM_8BIT ? READ_EEPROM8 : READ_EEPROM; GO_WINDOW(0); if (ex_eeprom_busy(sc)) goto out; bus_space_write_2(iot, ioh, ELINK_W0_EEPROM_COMMAND, cmd | (off + (offset & 0x3f))); if (ex_eeprom_busy(sc)) goto out; data = bus_space_read_2(iot, ioh, ELINK_W0_EEPROM_DATA); out: return data; } static int ex_eeprom_busy(struct ex_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int i = 100; while (i--) { if (!(bus_space_read_2(iot, ioh, ELINK_W0_EEPROM_COMMAND) & EEPROM_BUSY)) return 0; delay(100); } aprint_error_dev(sc->sc_dev, "eeprom stays busy.\n"); return (1); } /* * Create a new rx buffer and add it to the 'soft' rx list. */ static int ex_add_rxbuf(struct ex_softc *sc, struct ex_rxdesc *rxd) { struct mbuf *m, *oldm; bus_dmamap_t rxmap; int error, rval = 0; oldm = rxd->rx_mbhead; rxmap = rxd->rx_dmamap; MGETHDR(m, M_DONTWAIT, MT_DATA); if (m != NULL) { MCLGET(m, M_DONTWAIT); if ((m->m_flags & M_EXT) == 0) { m_freem(m); if (oldm == NULL) return 1; m = oldm; MRESETDATA(m); rval = 1; } } else { if (oldm == NULL) return 1; m = oldm; MRESETDATA(m); rval = 1; } /* * Setup the DMA map for this receive buffer. */ if (m != oldm) { if (oldm != NULL) bus_dmamap_unload(sc->sc_dmat, rxmap); error = bus_dmamap_load(sc->sc_dmat, rxmap, m->m_ext.ext_buf, MCLBYTES, NULL, BUS_DMA_READ|BUS_DMA_NOWAIT); if (error) { aprint_error_dev(sc->sc_dev, "can't load rx buffer, error = %d\n", error); panic("ex_add_rxbuf"); /* XXX */ } } /* * Align for data after 14 byte header. */ m->m_data += 2; rxd->rx_mbhead = m; rxd->rx_upd->upd_pktstatus = htole32(MCLBYTES - 2); rxd->rx_upd->upd_frags[0].fr_addr = htole32(rxmap->dm_segs[0].ds_addr + 2); rxd->rx_upd->upd_nextptr = 0; /* * Attach it to the end of the list. */ if (sc->rx_head != NULL) { sc->rx_tail->rx_next = rxd; sc->rx_tail->rx_upd->upd_nextptr = htole32(sc->sc_upddma + ((char *)rxd->rx_upd - (char *)sc->sc_upd)); bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap, (char *)sc->rx_tail->rx_upd - (char *)sc->sc_upd, sizeof (struct ex_upd), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); } else { sc->rx_head = rxd; } sc->rx_tail = rxd; bus_dmamap_sync(sc->sc_dmat, rxmap, 0, rxmap->dm_mapsize, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); bus_dmamap_sync(sc->sc_dmat, sc->sc_upd_dmamap, ((char *)rxd->rx_upd - (char *)sc->sc_upd), sizeof (struct ex_upd), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); return (rval); } uint32_t ex_mii_bitbang_read(device_t self) { struct ex_softc *sc = device_private(self); /* We're already in Window 4. */ return (bus_space_read_2(sc->sc_iot, sc->sc_ioh, ELINK_W4_PHYSMGMT)); } void ex_mii_bitbang_write(device_t self, uint32_t val) { struct ex_softc *sc = device_private(self); /* We're already in Window 4. */ bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_W4_PHYSMGMT, val); } int ex_mii_readreg(device_t v, int phy, int reg) { struct ex_softc *sc = device_private(v); int val; if ((sc->ex_conf & EX_CONF_INTPHY) && phy != ELINK_INTPHY_ID) return 0; GO_WINDOW(4); val = mii_bitbang_readreg(v, &ex_mii_bitbang_ops, phy, reg); GO_WINDOW(1); return (val); } void ex_mii_writereg(device_t v, int phy, int reg, int data) { struct ex_softc *sc = device_private(v); GO_WINDOW(4); mii_bitbang_writereg(v, &ex_mii_bitbang_ops, phy, reg, data); GO_WINDOW(1); } void ex_mii_statchg(struct ifnet *ifp) { struct ex_softc *sc = ifp->if_softc; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; int mctl; GO_WINDOW(3); mctl = bus_space_read_2(iot, ioh, ELINK_W3_MAC_CONTROL); if (sc->ex_mii.mii_media_active & IFM_FDX) mctl |= MAC_CONTROL_FDX; else mctl &= ~MAC_CONTROL_FDX; bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, mctl); GO_WINDOW(1); /* back to operating window */ } int ex_enable(struct ex_softc *sc) { if (sc->enabled == 0 && sc->enable != NULL) { if ((*sc->enable)(sc) != 0) { aprint_error_dev(sc->sc_dev, "device enable failed\n"); return (EIO); } sc->enabled = 1; } return (0); } void ex_disable(struct ex_softc *sc) { if (sc->enabled == 1 && sc->disable != NULL) { (*sc->disable)(sc); sc->enabled = 0; } }