/* $NetBSD: kern_clock.c,v 1.101 2006/06/09 22:47:56 kardel Exp $ */ /*- * Copyright (c) 2000, 2004 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 1982, 1986, 1991, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)kern_clock.c 8.5 (Berkeley) 1/21/94 */ #include __KERNEL_RCSID(0, "$NetBSD: kern_clock.c,v 1.101 2006/06/09 22:47:56 kardel Exp $"); #include "opt_ntp.h" #include "opt_multiprocessor.h" #include "opt_perfctrs.h" #include #include #include #include #include #include #include #include #include #include #include #ifdef __HAVE_TIMECOUNTER #include #endif #include #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS #include #endif #ifdef GPROF #include #endif /* * Clock handling routines. * * This code is written to operate with two timers that run independently of * each other. The main clock, running hz times per second, is used to keep * track of real time. The second timer handles kernel and user profiling, * and does resource use estimation. If the second timer is programmable, * it is randomized to avoid aliasing between the two clocks. For example, * the randomization prevents an adversary from always giving up the CPU * just before its quantum expires. Otherwise, it would never accumulate * CPU ticks. The mean frequency of the second timer is stathz. * * If no second timer exists, stathz will be zero; in this case we drive * profiling and statistics off the main clock. This WILL NOT be accurate; * do not do it unless absolutely necessary. * * The statistics clock may (or may not) be run at a higher rate while * profiling. This profile clock runs at profhz. We require that profhz * be an integral multiple of stathz. * * If the statistics clock is running fast, it must be divided by the ratio * profhz/stathz for statistics. (For profiling, every tick counts.) */ #ifndef __HAVE_TIMECOUNTER #ifdef NTP /* NTP phase-locked loop in kernel */ /* * Phase/frequency-lock loop (PLL/FLL) definitions * * The following variables are read and set by the ntp_adjtime() system * call. * * time_state shows the state of the system clock, with values defined * in the timex.h header file. * * time_status shows the status of the system clock, with bits defined * in the timex.h header file. * * time_offset is used by the PLL/FLL to adjust the system time in small * increments. * * time_constant determines the bandwidth or "stiffness" of the PLL. * * time_tolerance determines maximum frequency error or tolerance of the * CPU clock oscillator and is a property of the architecture; however, * in principle it could change as result of the presence of external * discipline signals, for instance. * * time_precision is usually equal to the kernel tick variable; however, * in cases where a precision clock counter or external clock is * available, the resolution can be much less than this and depend on * whether the external clock is working or not. * * time_maxerror is initialized by a ntp_adjtime() call and increased by * the kernel once each second to reflect the maximum error bound * growth. * * time_esterror is set and read by the ntp_adjtime() call, but * otherwise not used by the kernel. */ int time_state = TIME_OK; /* clock state */ int time_status = STA_UNSYNC; /* clock status bits */ long time_offset = 0; /* time offset (us) */ long time_constant = 0; /* pll time constant */ long time_tolerance = MAXFREQ; /* frequency tolerance (scaled ppm) */ long time_precision = 1; /* clock precision (us) */ long time_maxerror = MAXPHASE; /* maximum error (us) */ long time_esterror = MAXPHASE; /* estimated error (us) */ /* * The following variables establish the state of the PLL/FLL and the * residual time and frequency offset of the local clock. The scale * factors are defined in the timex.h header file. * * time_phase and time_freq are the phase increment and the frequency * increment, respectively, of the kernel time variable. * * time_freq is set via ntp_adjtime() from a value stored in a file when * the synchronization daemon is first started. Its value is retrieved * via ntp_adjtime() and written to the file about once per hour by the * daemon. * * time_adj is the adjustment added to the value of tick at each timer * interrupt and is recomputed from time_phase and time_freq at each * seconds rollover. * * time_reftime is the second's portion of the system time at the last * call to ntp_adjtime(). It is used to adjust the time_freq variable * and to increase the time_maxerror as the time since last update * increases. */ long time_phase = 0; /* phase offset (scaled us) */ long time_freq = 0; /* frequency offset (scaled ppm) */ long time_adj = 0; /* tick adjust (scaled 1 / hz) */ long time_reftime = 0; /* time at last adjustment (s) */ #ifdef PPS_SYNC /* * The following variables are used only if the kernel PPS discipline * code is configured (PPS_SYNC). The scale factors are defined in the * timex.h header file. * * pps_time contains the time at each calibration interval, as read by * microtime(). pps_count counts the seconds of the calibration * interval, the duration of which is nominally pps_shift in powers of * two. * * pps_offset is the time offset produced by the time median filter * pps_tf[], while pps_jitter is the dispersion (jitter) measured by * this filter. * * pps_freq is the frequency offset produced by the frequency median * filter pps_ff[], while pps_stabil is the dispersion (wander) measured * by this filter. * * pps_usec is latched from a high resolution counter or external clock * at pps_time. Here we want the hardware counter contents only, not the * contents plus the time_tv.usec as usual. * * pps_valid counts the number of seconds since the last PPS update. It * is used as a watchdog timer to disable the PPS discipline should the * PPS signal be lost. * * pps_glitch counts the number of seconds since the beginning of an * offset burst more than tick/2 from current nominal offset. It is used * mainly to suppress error bursts due to priority conflicts between the * PPS interrupt and timer interrupt. * * pps_intcnt counts the calibration intervals for use in the interval- * adaptation algorithm. It's just too complicated for words. * * pps_kc_hardpps_source contains an arbitrary value that uniquely * identifies the currently bound source of the PPS signal, or NULL * if no source is bound. * * pps_kc_hardpps_mode indicates which transitions, if any, of the PPS * signal should be reported. */ struct timeval pps_time; /* kernel time at last interval */ long pps_tf[] = {0, 0, 0}; /* pps time offset median filter (us) */ long pps_offset = 0; /* pps time offset (us) */ long pps_jitter = MAXTIME; /* time dispersion (jitter) (us) */ long pps_ff[] = {0, 0, 0}; /* pps frequency offset median filter */ long pps_freq = 0; /* frequency offset (scaled ppm) */ long pps_stabil = MAXFREQ; /* frequency dispersion (scaled ppm) */ long pps_usec = 0; /* microsec counter at last interval */ long pps_valid = PPS_VALID; /* pps signal watchdog counter */ int pps_glitch = 0; /* pps signal glitch counter */ int pps_count = 0; /* calibration interval counter (s) */ int pps_shift = PPS_SHIFT; /* interval duration (s) (shift) */ int pps_intcnt = 0; /* intervals at current duration */ void *pps_kc_hardpps_source = NULL; /* current PPS supplier's identifier */ int pps_kc_hardpps_mode = 0; /* interesting edges of PPS signal */ /* * PPS signal quality monitors * * pps_jitcnt counts the seconds that have been discarded because the * jitter measured by the time median filter exceeds the limit MAXTIME * (100 us). * * pps_calcnt counts the frequency calibration intervals, which are * variable from 4 s to 256 s. * * pps_errcnt counts the calibration intervals which have been discarded * because the wander exceeds the limit MAXFREQ (100 ppm) or where the * calibration interval jitter exceeds two ticks. * * pps_stbcnt counts the calibration intervals that have been discarded * because the frequency wander exceeds the limit MAXFREQ / 4 (25 us). */ long pps_jitcnt = 0; /* jitter limit exceeded */ long pps_calcnt = 0; /* calibration intervals */ long pps_errcnt = 0; /* calibration errors */ long pps_stbcnt = 0; /* stability limit exceeded */ #endif /* PPS_SYNC */ #ifdef EXT_CLOCK /* * External clock definitions * * The following definitions and declarations are used only if an * external clock is configured on the system. */ #define CLOCK_INTERVAL 30 /* CPU clock update interval (s) */ /* * The clock_count variable is set to CLOCK_INTERVAL at each PPS * interrupt and decremented once each second. */ int clock_count = 0; /* CPU clock counter */ #ifdef HIGHBALL /* * The clock_offset and clock_cpu variables are used by the HIGHBALL * interface. The clock_offset variable defines the offset between * system time and the HIGBALL counters. The clock_cpu variable contains * the offset between the system clock and the HIGHBALL clock for use in * disciplining the kernel time variable. */ extern struct timeval clock_offset; /* Highball clock offset */ long clock_cpu = 0; /* CPU clock adjust */ #endif /* HIGHBALL */ #endif /* EXT_CLOCK */ #endif /* NTP */ /* * Bump a timeval by a small number of usec's. */ #define BUMPTIME(t, usec) { \ volatile struct timeval *tp = (t); \ long us; \ \ tp->tv_usec = us = tp->tv_usec + (usec); \ if (us >= 1000000) { \ tp->tv_usec = us - 1000000; \ tp->tv_sec++; \ } \ } #endif /* !__HAVE_TIMECOUNTER */ int stathz; int profhz; int profsrc; int schedhz; int profprocs; int hardclock_ticks; static int statscheddiv; /* stat => sched divider (used if schedhz == 0) */ static int psdiv; /* prof => stat divider */ int psratio; /* ratio: prof / stat */ #ifndef __HAVE_TIMECOUNTER int tickfix, tickfixinterval; /* used if tick not really integral */ #ifndef NTP static int tickfixcnt; /* accumulated fractional error */ #else int fixtick; /* used by NTP for same */ int shifthz; #endif /* * We might want ldd to load the both words from time at once. * To succeed we need to be quadword aligned. * The sparc already does that, and that it has worked so far is a fluke. */ volatile struct timeval time __attribute__((__aligned__(__alignof__(quad_t)))); volatile struct timeval mono_time; #endif /* !__HAVE_TIMECOUNTER */ #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS void *softclock_si; #endif #ifdef __HAVE_TIMECOUNTER static u_int get_intr_timecount(struct timecounter *); static struct timecounter intr_timecounter = { get_intr_timecount, /* get_timecount */ 0, /* no poll_pps */ ~0u, /* counter_mask */ 0, /* frequency */ "clockinterrupt", /* name */ 0 /* quality - minimum implementation level for a clock */ }; static u_int get_intr_timecount(struct timecounter *tc) { return (u_int)hardclock_ticks; } #endif /* * Initialize clock frequencies and start both clocks running. */ void initclocks(void) { int i; #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS softclock_si = softintr_establish(IPL_SOFTCLOCK, softclock, NULL); if (softclock_si == NULL) panic("initclocks: unable to register softclock intr"); #endif /* * Set divisors to 1 (normal case) and let the machine-specific * code do its bit. */ psdiv = 1; #ifdef __HAVE_TIMECOUNTER /* * provide minimum default time counter * will only run at interrupt resolution */ intr_timecounter.tc_frequency = hz; tc_init(&intr_timecounter); #endif cpu_initclocks(); /* * Compute profhz/stathz/rrticks, and fix profhz if needed. */ i = stathz ? stathz : hz; if (profhz == 0) profhz = i; psratio = profhz / i; rrticks = hz / 10; if (schedhz == 0) { /* 16Hz is best */ statscheddiv = i / 16; if (statscheddiv <= 0) panic("statscheddiv"); } #ifndef __HAVE_TIMECOUNTER #ifdef NTP switch (hz) { case 1: shifthz = SHIFT_SCALE - 0; break; case 2: shifthz = SHIFT_SCALE - 1; break; case 4: shifthz = SHIFT_SCALE - 2; break; case 8: shifthz = SHIFT_SCALE - 3; break; case 16: shifthz = SHIFT_SCALE - 4; break; case 32: shifthz = SHIFT_SCALE - 5; break; case 50: case 60: case 64: shifthz = SHIFT_SCALE - 6; break; case 96: case 100: case 128: shifthz = SHIFT_SCALE - 7; break; case 256: shifthz = SHIFT_SCALE - 8; break; case 512: shifthz = SHIFT_SCALE - 9; break; case 1000: case 1024: shifthz = SHIFT_SCALE - 10; break; case 1200: case 2048: shifthz = SHIFT_SCALE - 11; break; case 4096: shifthz = SHIFT_SCALE - 12; break; case 8192: shifthz = SHIFT_SCALE - 13; break; case 16384: shifthz = SHIFT_SCALE - 14; break; case 32768: shifthz = SHIFT_SCALE - 15; break; case 65536: shifthz = SHIFT_SCALE - 16; break; default: panic("weird hz"); } if (fixtick == 0) { /* * Give MD code a chance to set this to a better * value; but, if it doesn't, we should. */ fixtick = (1000000 - (hz*tick)); } #endif /* NTP */ #endif /* !__HAVE_TIMECOUNTER */ } /* * The real-time timer, interrupting hz times per second. */ void hardclock(struct clockframe *frame) { struct lwp *l; struct proc *p; struct cpu_info *ci = curcpu(); struct ptimer *pt; #ifndef __HAVE_TIMECOUNTER int delta; extern int tickdelta; extern long timedelta; #ifdef NTP int time_update; int ltemp; #endif /* NTP */ #endif /* __HAVE_TIMECOUNTER */ l = curlwp; if (l) { p = l->l_proc; /* * Run current process's virtual and profile time, as needed. */ if (CLKF_USERMODE(frame) && p->p_timers && (pt = LIST_FIRST(&p->p_timers->pts_virtual)) != NULL) if (itimerdecr(pt, tick) == 0) itimerfire(pt); if (p->p_timers && (pt = LIST_FIRST(&p->p_timers->pts_prof)) != NULL) if (itimerdecr(pt, tick) == 0) itimerfire(pt); } /* * If no separate statistics clock is available, run it from here. */ if (stathz == 0) statclock(frame); if ((--ci->ci_schedstate.spc_rrticks) <= 0) roundrobin(ci); #if defined(MULTIPROCESSOR) /* * If we are not the primary CPU, we're not allowed to do * any more work. */ if (CPU_IS_PRIMARY(ci) == 0) return; #endif hardclock_ticks++; #ifdef __HAVE_TIMECOUNTER tc_ticktock(); #else /* __HAVE_TIMECOUNTER */ /* * Increment the time-of-day. The increment is normally just * ``tick''. If the machine is one which has a clock frequency * such that ``hz'' would not divide the second evenly into * milliseconds, a periodic adjustment must be applied. Finally, * if we are still adjusting the time (see adjtime()), * ``tickdelta'' may also be added in. */ delta = tick; #ifndef NTP if (tickfix) { tickfixcnt += tickfix; if (tickfixcnt >= tickfixinterval) { delta++; tickfixcnt -= tickfixinterval; } } #endif /* !NTP */ /* Imprecise 4bsd adjtime() handling */ if (timedelta != 0) { delta += tickdelta; timedelta -= tickdelta; } #ifdef notyet microset(); #endif #ifndef NTP BUMPTIME(&time, delta); /* XXX Now done using NTP code below */ #endif BUMPTIME(&mono_time, delta); #ifdef NTP time_update = delta; /* * Compute the phase adjustment. If the low-order bits * (time_phase) of the update overflow, bump the high-order bits * (time_update). */ time_phase += time_adj; if (time_phase <= -FINEUSEC) { ltemp = -time_phase >> SHIFT_SCALE; time_phase += ltemp << SHIFT_SCALE; time_update -= ltemp; } else if (time_phase >= FINEUSEC) { ltemp = time_phase >> SHIFT_SCALE; time_phase -= ltemp << SHIFT_SCALE; time_update += ltemp; } #ifdef HIGHBALL /* * If the HIGHBALL board is installed, we need to adjust the * external clock offset in order to close the hardware feedback * loop. This will adjust the external clock phase and frequency * in small amounts. The additional phase noise and frequency * wander this causes should be minimal. We also need to * discipline the kernel time variable, since the PLL is used to * discipline the external clock. If the Highball board is not * present, we discipline kernel time with the PLL as usual. We * assume that the external clock phase adjustment (time_update) * and kernel phase adjustment (clock_cpu) are less than the * value of tick. */ clock_offset.tv_usec += time_update; if (clock_offset.tv_usec >= 1000000) { clock_offset.tv_sec++; clock_offset.tv_usec -= 1000000; } if (clock_offset.tv_usec < 0) { clock_offset.tv_sec--; clock_offset.tv_usec += 1000000; } time.tv_usec += clock_cpu; clock_cpu = 0; #else time.tv_usec += time_update; #endif /* HIGHBALL */ /* * On rollover of the second the phase adjustment to be used for * the next second is calculated. Also, the maximum error is * increased by the tolerance. If the PPS frequency discipline * code is present, the phase is increased to compensate for the * CPU clock oscillator frequency error. * * On a 32-bit machine and given parameters in the timex.h * header file, the maximum phase adjustment is +-512 ms and * maximum frequency offset is a tad less than) +-512 ppm. On a * 64-bit machine, you shouldn't need to ask. */ if (time.tv_usec >= 1000000) { time.tv_usec -= 1000000; time.tv_sec++; time_maxerror += time_tolerance >> SHIFT_USEC; /* * Leap second processing. If in leap-insert state at * the end of the day, the system clock is set back one * second; if in leap-delete state, the system clock is * set ahead one second. The microtime() routine or * external clock driver will insure that reported time * is always monotonic. The ugly divides should be * replaced. */ switch (time_state) { case TIME_OK: if (time_status & STA_INS) time_state = TIME_INS; else if (time_status & STA_DEL) time_state = TIME_DEL; break; case TIME_INS: if (time.tv_sec % 86400 == 0) { time.tv_sec--; time_state = TIME_OOP; } break; case TIME_DEL: if ((time.tv_sec + 1) % 86400 == 0) { time.tv_sec++; time_state = TIME_WAIT; } break; case TIME_OOP: time_state = TIME_WAIT; break; case TIME_WAIT: if (!(time_status & (STA_INS | STA_DEL))) time_state = TIME_OK; break; } /* * Compute the phase adjustment for the next second. In * PLL mode, the offset is reduced by a fixed factor * times the time constant. In FLL mode the offset is * used directly. In either mode, the maximum phase * adjustment for each second is clamped so as to spread * the adjustment over not more than the number of * seconds between updates. */ if (time_offset < 0) { ltemp = -time_offset; if (!(time_status & STA_FLL)) ltemp >>= SHIFT_KG + time_constant; if (ltemp > (MAXPHASE / MINSEC) << SHIFT_UPDATE) ltemp = (MAXPHASE / MINSEC) << SHIFT_UPDATE; time_offset += ltemp; time_adj = -ltemp << (shifthz - SHIFT_UPDATE); } else if (time_offset > 0) { ltemp = time_offset; if (!(time_status & STA_FLL)) ltemp >>= SHIFT_KG + time_constant; if (ltemp > (MAXPHASE / MINSEC) << SHIFT_UPDATE) ltemp = (MAXPHASE / MINSEC) << SHIFT_UPDATE; time_offset -= ltemp; time_adj = ltemp << (shifthz - SHIFT_UPDATE); } else time_adj = 0; /* * Compute the frequency estimate and additional phase * adjustment due to frequency error for the next * second. When the PPS signal is engaged, gnaw on the * watchdog counter and update the frequency computed by * the pll and the PPS signal. */ #ifdef PPS_SYNC pps_valid++; if (pps_valid == PPS_VALID) { pps_jitter = MAXTIME; pps_stabil = MAXFREQ; time_status &= ~(STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | STA_PPSERROR); } ltemp = time_freq + pps_freq; #else ltemp = time_freq; #endif /* PPS_SYNC */ if (ltemp < 0) time_adj -= -ltemp >> (SHIFT_USEC - shifthz); else time_adj += ltemp >> (SHIFT_USEC - shifthz); time_adj += (long)fixtick << shifthz; /* * When the CPU clock oscillator frequency is not a * power of 2 in Hz, shifthz is only an approximate * scale factor. * * To determine the adjustment, you can do the following: * bc -q * scale=24 * obase=2 * idealhz/realhz * where `idealhz' is the next higher power of 2, and `realhz' * is the actual value. You may need to factor this result * into a sequence of 2 multipliers to get better precision. * * Likewise, the error can be calculated with (e.g. for 100Hz): * bc -q * scale=24 * ((1+2^-2+2^-5)*(1-2^-10)*realhz-idealhz)/idealhz * (and then multiply by 1000000 to get ppm). */ switch (hz) { case 60: /* A factor of 1.000100010001 gives about 15ppm error. */ if (time_adj < 0) { time_adj -= (-time_adj >> 4); time_adj -= (-time_adj >> 8); } else { time_adj += (time_adj >> 4); time_adj += (time_adj >> 8); } break; case 96: /* A factor of 1.0101010101 gives about 244ppm error. */ if (time_adj < 0) { time_adj -= (-time_adj >> 2); time_adj -= (-time_adj >> 4) + (-time_adj >> 8); } else { time_adj += (time_adj >> 2); time_adj += (time_adj >> 4) + (time_adj >> 8); } break; case 50: case 100: /* A factor of 1.010001111010111 gives about 1ppm error. */ if (time_adj < 0) { time_adj -= (-time_adj >> 2) + (-time_adj >> 5); time_adj += (-time_adj >> 10); } else { time_adj += (time_adj >> 2) + (time_adj >> 5); time_adj -= (time_adj >> 10); } break; case 1000: /* A factor of 1.000001100010100001 gives about 50ppm error. */ if (time_adj < 0) { time_adj -= (-time_adj >> 6) + (-time_adj >> 11); time_adj -= (-time_adj >> 7); } else { time_adj += (time_adj >> 6) + (time_adj >> 11); time_adj += (time_adj >> 7); } break; case 1200: /* A factor of 1.1011010011100001 gives about 64ppm error. */ if (time_adj < 0) { time_adj -= (-time_adj >> 1) + (-time_adj >> 6); time_adj -= (-time_adj >> 3) + (-time_adj >> 10); } else { time_adj += (time_adj >> 1) + (time_adj >> 6); time_adj += (time_adj >> 3) + (time_adj >> 10); } break; } #ifdef EXT_CLOCK /* * If an external clock is present, it is necessary to * discipline the kernel time variable anyway, since not * all system components use the microtime() interface. * Here, the time offset between the external clock and * kernel time variable is computed every so often. */ clock_count++; if (clock_count > CLOCK_INTERVAL) { clock_count = 0; microtime(&clock_ext); delta.tv_sec = clock_ext.tv_sec - time.tv_sec; delta.tv_usec = clock_ext.tv_usec - time.tv_usec; if (delta.tv_usec < 0) delta.tv_sec--; if (delta.tv_usec >= 500000) { delta.tv_usec -= 1000000; delta.tv_sec++; } if (delta.tv_usec < -500000) { delta.tv_usec += 1000000; delta.tv_sec--; } if (delta.tv_sec > 0 || (delta.tv_sec == 0 && delta.tv_usec > MAXPHASE) || delta.tv_sec < -1 || (delta.tv_sec == -1 && delta.tv_usec < -MAXPHASE)) { time = clock_ext; delta.tv_sec = 0; delta.tv_usec = 0; } #ifdef HIGHBALL clock_cpu = delta.tv_usec; #else /* HIGHBALL */ hardupdate(delta.tv_usec); #endif /* HIGHBALL */ } #endif /* EXT_CLOCK */ } #endif /* NTP */ #endif /* !__HAVE_TIMECOUNTER */ /* * Update real-time timeout queue. * Process callouts at a very low CPU priority, so we don't keep the * relatively high clock interrupt priority any longer than necessary. */ if (callout_hardclock()) { if (CLKF_BASEPRI(frame)) { /* * Save the overhead of a software interrupt; * it will happen as soon as we return, so do * it now. */ spllowersoftclock(); KERNEL_LOCK(LK_CANRECURSE|LK_EXCLUSIVE); softclock(NULL); KERNEL_UNLOCK(); } else { #ifdef __HAVE_GENERIC_SOFT_INTERRUPTS softintr_schedule(softclock_si); #else setsoftclock(); #endif } } } #ifdef __HAVE_TIMECOUNTER /* * Compute number of hz until specified time. Used to compute second * argument to callout_reset() from an absolute time. */ int hzto(struct timeval *tvp) { struct timeval now, tv; tv = *tvp; /* Don't modify original tvp. */ getmicrotime(&now); timersub(&tv, &now, &tv); return tvtohz(&tv); } #endif /* __HAVE_TIMECOUNTER */ /* * Compute number of ticks in the specified amount of time. */ int tvtohz(struct timeval *tv) { unsigned long ticks; long sec, usec; /* * If the number of usecs in the whole seconds part of the time * difference fits in a long, then the total number of usecs will * fit in an unsigned long. Compute the total and convert it to * ticks, rounding up and adding 1 to allow for the current tick * to expire. Rounding also depends on unsigned long arithmetic * to avoid overflow. * * Otherwise, if the number of ticks in the whole seconds part of * the time difference fits in a long, then convert the parts to * ticks separately and add, using similar rounding methods and * overflow avoidance. This method would work in the previous * case, but it is slightly slower and assumes that hz is integral. * * Otherwise, round the time difference down to the maximum * representable value. * * If ints are 32-bit, then the maximum value for any timeout in * 10ms ticks is 248 days. */ sec = tv->tv_sec; usec = tv->tv_usec; if (usec < 0) { sec--; usec += 1000000; } if (sec < 0 || (sec == 0 && usec <= 0)) { /* * Would expire now or in the past. Return 0 ticks. * This is different from the legacy hzto() interface, * and callers need to check for it. */ ticks = 0; } else if (sec <= (LONG_MAX / 1000000)) ticks = (((sec * 1000000) + (unsigned long)usec + (tick - 1)) / tick) + 1; else if (sec <= (LONG_MAX / hz)) ticks = (sec * hz) + (((unsigned long)usec + (tick - 1)) / tick) + 1; else ticks = LONG_MAX; if (ticks > INT_MAX) ticks = INT_MAX; return ((int)ticks); } #ifndef __HAVE_TIMECOUNTER /* * Compute number of hz until specified time. Used to compute second * argument to callout_reset() from an absolute time. */ int hzto(struct timeval *tv) { unsigned long ticks; long sec, usec; int s; /* * If the number of usecs in the whole seconds part of the time * difference fits in a long, then the total number of usecs will * fit in an unsigned long. Compute the total and convert it to * ticks, rounding up and adding 1 to allow for the current tick * to expire. Rounding also depends on unsigned long arithmetic * to avoid overflow. * * Otherwise, if the number of ticks in the whole seconds part of * the time difference fits in a long, then convert the parts to * ticks separately and add, using similar rounding methods and * overflow avoidance. This method would work in the previous * case, but it is slightly slower and assume that hz is integral. * * Otherwise, round the time difference down to the maximum * representable value. * * If ints are 32-bit, then the maximum value for any timeout in * 10ms ticks is 248 days. */ s = splclock(); sec = tv->tv_sec - time.tv_sec; usec = tv->tv_usec - time.tv_usec; splx(s); if (usec < 0) { sec--; usec += 1000000; } if (sec < 0 || (sec == 0 && usec <= 0)) { /* * Would expire now or in the past. Return 0 ticks. * This is different from the legacy hzto() interface, * and callers need to check for it. */ ticks = 0; } else if (sec <= (LONG_MAX / 1000000)) ticks = (((sec * 1000000) + (unsigned long)usec + (tick - 1)) / tick) + 1; else if (sec <= (LONG_MAX / hz)) ticks = (sec * hz) + (((unsigned long)usec + (tick - 1)) / tick) + 1; else ticks = LONG_MAX; if (ticks > INT_MAX) ticks = INT_MAX; return ((int)ticks); } #endif /* !__HAVE_TIMECOUNTER */ /* * Compute number of ticks in the specified amount of time. */ int tstohz(struct timespec *ts) { struct timeval tv; /* * usec has great enough resolution for hz, so convert to a * timeval and use tvtohz() above. */ TIMESPEC_TO_TIMEVAL(&tv, ts); return tvtohz(&tv); } /* * Start profiling on a process. * * Kernel profiling passes proc0 which never exits and hence * keeps the profile clock running constantly. */ void startprofclock(struct proc *p) { if ((p->p_flag & P_PROFIL) == 0) { p->p_flag |= P_PROFIL; /* * This is only necessary if using the clock as the * profiling source. */ if (++profprocs == 1 && stathz != 0) psdiv = psratio; } } /* * Stop profiling on a process. */ void stopprofclock(struct proc *p) { if (p->p_flag & P_PROFIL) { p->p_flag &= ~P_PROFIL; /* * This is only necessary if using the clock as the * profiling source. */ if (--profprocs == 0 && stathz != 0) psdiv = 1; } } #if defined(PERFCTRS) /* * Independent profiling "tick" in case we're using a separate * clock or profiling event source. Currently, that's just * performance counters--hence the wrapper. */ void proftick(struct clockframe *frame) { #ifdef GPROF struct gmonparam *g; intptr_t i; #endif struct proc *p; p = curproc; if (CLKF_USERMODE(frame)) { if (p->p_flag & P_PROFIL) addupc_intr(p, CLKF_PC(frame)); } else { #ifdef GPROF g = &_gmonparam; if (g->state == GMON_PROF_ON) { i = CLKF_PC(frame) - g->lowpc; if (i < g->textsize) { i /= HISTFRACTION * sizeof(*g->kcount); g->kcount[i]++; } } #endif #ifdef PROC_PC if (p && (p->p_flag & P_PROFIL)) addupc_intr(p, PROC_PC(p)); #endif } } #endif /* * Statistics clock. Grab profile sample, and if divider reaches 0, * do process and kernel statistics. */ void statclock(struct clockframe *frame) { #ifdef GPROF struct gmonparam *g; intptr_t i; #endif struct cpu_info *ci = curcpu(); struct schedstate_percpu *spc = &ci->ci_schedstate; struct proc *p; struct lwp *l; /* * Notice changes in divisor frequency, and adjust clock * frequency accordingly. */ if (spc->spc_psdiv != psdiv) { spc->spc_psdiv = psdiv; spc->spc_pscnt = psdiv; if (psdiv == 1) { setstatclockrate(stathz); } else { setstatclockrate(profhz); } } l = curlwp; p = (l ? l->l_proc : NULL); if (CLKF_USERMODE(frame)) { KASSERT(p != NULL); if ((p->p_flag & P_PROFIL) && profsrc == PROFSRC_CLOCK) addupc_intr(p, CLKF_PC(frame)); if (--spc->spc_pscnt > 0) return; /* * Came from user mode; CPU was in user state. * If this process is being profiled record the tick. */ p->p_uticks++; if (p->p_nice > NZERO) spc->spc_cp_time[CP_NICE]++; else spc->spc_cp_time[CP_USER]++; } else { #ifdef GPROF /* * Kernel statistics are just like addupc_intr, only easier. */ g = &_gmonparam; if (profsrc == PROFSRC_CLOCK && g->state == GMON_PROF_ON) { i = CLKF_PC(frame) - g->lowpc; if (i < g->textsize) { i /= HISTFRACTION * sizeof(*g->kcount); g->kcount[i]++; } } #endif #ifdef LWP_PC if (p && profsrc == PROFSRC_CLOCK && (p->p_flag & P_PROFIL)) addupc_intr(p, LWP_PC(l)); #endif if (--spc->spc_pscnt > 0) return; /* * Came from kernel mode, so we were: * - handling an interrupt, * - doing syscall or trap work on behalf of the current * user process, or * - spinning in the idle loop. * Whichever it is, charge the time as appropriate. * Note that we charge interrupts to the current process, * regardless of whether they are ``for'' that process, * so that we know how much of its real time was spent * in ``non-process'' (i.e., interrupt) work. */ if (CLKF_INTR(frame)) { if (p != NULL) p->p_iticks++; spc->spc_cp_time[CP_INTR]++; } else if (p != NULL) { p->p_sticks++; spc->spc_cp_time[CP_SYS]++; } else spc->spc_cp_time[CP_IDLE]++; } spc->spc_pscnt = psdiv; if (p != NULL) { ++p->p_cpticks; /* * If no separate schedclock is provided, call it here * at about 16 Hz. */ if (schedhz == 0) if ((int)(--ci->ci_schedstate.spc_schedticks) <= 0) { schedclock(l); ci->ci_schedstate.spc_schedticks = statscheddiv; } } } #ifndef __HAVE_TIMECOUNTER #ifdef NTP /* NTP phase-locked loop in kernel */ /* * hardupdate() - local clock update * * This routine is called by ntp_adjtime() to update the local clock * phase and frequency. The implementation is of an adaptive-parameter, * hybrid phase/frequency-lock loop (PLL/FLL). The routine computes new * time and frequency offset estimates for each call. If the kernel PPS * discipline code is configured (PPS_SYNC), the PPS signal itself * determines the new time offset, instead of the calling argument. * Presumably, calls to ntp_adjtime() occur only when the caller * believes the local clock is valid within some bound (+-128 ms with * NTP). If the caller's time is far different than the PPS time, an * argument will ensue, and it's not clear who will lose. * * For uncompensated quartz crystal oscillatores and nominal update * intervals less than 1024 s, operation should be in phase-lock mode * (STA_FLL = 0), where the loop is disciplined to phase. For update * intervals greater than thiss, operation should be in frequency-lock * mode (STA_FLL = 1), where the loop is disciplined to frequency. * * Note: splclock() is in effect. */ void hardupdate(long offset) { long ltemp, mtemp; if (!(time_status & STA_PLL) && !(time_status & STA_PPSTIME)) return; ltemp = offset; #ifdef PPS_SYNC if (time_status & STA_PPSTIME && time_status & STA_PPSSIGNAL) ltemp = pps_offset; #endif /* PPS_SYNC */ /* * Scale the phase adjustment and clamp to the operating range. */ if (ltemp > MAXPHASE) time_offset = MAXPHASE << SHIFT_UPDATE; else if (ltemp < -MAXPHASE) time_offset = -(MAXPHASE << SHIFT_UPDATE); else time_offset = ltemp << SHIFT_UPDATE; /* * Select whether the frequency is to be controlled and in which * mode (PLL or FLL). Clamp to the operating range. Ugly * multiply/divide should be replaced someday. */ if (time_status & STA_FREQHOLD || time_reftime == 0) time_reftime = time.tv_sec; mtemp = time.tv_sec - time_reftime; time_reftime = time.tv_sec; if (time_status & STA_FLL) { if (mtemp >= MINSEC) { ltemp = ((time_offset / mtemp) << (SHIFT_USEC - SHIFT_UPDATE)); if (ltemp < 0) time_freq -= -ltemp >> SHIFT_KH; else time_freq += ltemp >> SHIFT_KH; } } else { if (mtemp < MAXSEC) { ltemp *= mtemp; if (ltemp < 0) time_freq -= -ltemp >> (time_constant + time_constant + SHIFT_KF - SHIFT_USEC); else time_freq += ltemp >> (time_constant + time_constant + SHIFT_KF - SHIFT_USEC); } } if (time_freq > time_tolerance) time_freq = time_tolerance; else if (time_freq < -time_tolerance) time_freq = -time_tolerance; } #ifdef PPS_SYNC /* * hardpps() - discipline CPU clock oscillator to external PPS signal * * This routine is called at each PPS interrupt in order to discipline * the CPU clock oscillator to the PPS signal. It measures the PPS phase * and leaves it in a handy spot for the hardclock() routine. It * integrates successive PPS phase differences and calculates the * frequency offset. This is used in hardclock() to discipline the CPU * clock oscillator so that intrinsic frequency error is cancelled out. * The code requires the caller to capture the time and hardware counter * value at the on-time PPS signal transition. * * Note that, on some Unix systems, this routine runs at an interrupt * priority level higher than the timer interrupt routine hardclock(). * Therefore, the variables used are distinct from the hardclock() * variables, except for certain exceptions: The PPS frequency pps_freq * and phase pps_offset variables are determined by this routine and * updated atomically. The time_tolerance variable can be considered a * constant, since it is infrequently changed, and then only when the * PPS signal is disabled. The watchdog counter pps_valid is updated * once per second by hardclock() and is atomically cleared in this * routine. */ void hardpps(struct timeval *tvp, /* time at PPS */ long usec /* hardware counter at PPS */) { long u_usec, v_usec, bigtick; long cal_sec, cal_usec; /* * An occasional glitch can be produced when the PPS interrupt * occurs in the hardclock() routine before the time variable is * updated. Here the offset is discarded when the difference * between it and the last one is greater than tick/2, but not * if the interval since the first discard exceeds 30 s. */ time_status |= STA_PPSSIGNAL; time_status &= ~(STA_PPSJITTER | STA_PPSWANDER | STA_PPSERROR); pps_valid = 0; u_usec = -tvp->tv_usec; if (u_usec < -500000) u_usec += 1000000; v_usec = pps_offset - u_usec; if (v_usec < 0) v_usec = -v_usec; if (v_usec > (tick >> 1)) { if (pps_glitch > MAXGLITCH) { pps_glitch = 0; pps_tf[2] = u_usec; pps_tf[1] = u_usec; } else { pps_glitch++; u_usec = pps_offset; } } else pps_glitch = 0; /* * A three-stage median filter is used to help deglitch the pps * time. The median sample becomes the time offset estimate; the * difference between the other two samples becomes the time * dispersion (jitter) estimate. */ pps_tf[2] = pps_tf[1]; pps_tf[1] = pps_tf[0]; pps_tf[0] = u_usec; if (pps_tf[0] > pps_tf[1]) { if (pps_tf[1] > pps_tf[2]) { pps_offset = pps_tf[1]; /* 0 1 2 */ v_usec = pps_tf[0] - pps_tf[2]; } else if (pps_tf[2] > pps_tf[0]) { pps_offset = pps_tf[0]; /* 2 0 1 */ v_usec = pps_tf[2] - pps_tf[1]; } else { pps_offset = pps_tf[2]; /* 0 2 1 */ v_usec = pps_tf[0] - pps_tf[1]; } } else { if (pps_tf[1] < pps_tf[2]) { pps_offset = pps_tf[1]; /* 2 1 0 */ v_usec = pps_tf[2] - pps_tf[0]; } else if (pps_tf[2] < pps_tf[0]) { pps_offset = pps_tf[0]; /* 1 0 2 */ v_usec = pps_tf[1] - pps_tf[2]; } else { pps_offset = pps_tf[2]; /* 1 2 0 */ v_usec = pps_tf[1] - pps_tf[0]; } } if (v_usec > MAXTIME) pps_jitcnt++; v_usec = (v_usec << PPS_AVG) - pps_jitter; if (v_usec < 0) pps_jitter -= -v_usec >> PPS_AVG; else pps_jitter += v_usec >> PPS_AVG; if (pps_jitter > (MAXTIME >> 1)) time_status |= STA_PPSJITTER; /* * During the calibration interval adjust the starting time when * the tick overflows. At the end of the interval compute the * duration of the interval and the difference of the hardware * counters at the beginning and end of the interval. This code * is deliciously complicated by the fact valid differences may * exceed the value of tick when using long calibration * intervals and small ticks. Note that the counter can be * greater than tick if caught at just the wrong instant, but * the values returned and used here are correct. */ bigtick = (long)tick << SHIFT_USEC; pps_usec -= pps_freq; if (pps_usec >= bigtick) pps_usec -= bigtick; if (pps_usec < 0) pps_usec += bigtick; pps_time.tv_sec++; pps_count++; if (pps_count < (1 << pps_shift)) return; pps_count = 0; pps_calcnt++; u_usec = usec << SHIFT_USEC; v_usec = pps_usec - u_usec; if (v_usec >= bigtick >> 1) v_usec -= bigtick; if (v_usec < -(bigtick >> 1)) v_usec += bigtick; if (v_usec < 0) v_usec = -(-v_usec >> pps_shift); else v_usec = v_usec >> pps_shift; pps_usec = u_usec; cal_sec = tvp->tv_sec; cal_usec = tvp->tv_usec; cal_sec -= pps_time.tv_sec; cal_usec -= pps_time.tv_usec; if (cal_usec < 0) { cal_usec += 1000000; cal_sec--; } pps_time = *tvp; /* * Check for lost interrupts, noise, excessive jitter and * excessive frequency error. The number of timer ticks during * the interval may vary +-1 tick. Add to this a margin of one * tick for the PPS signal jitter and maximum frequency * deviation. If the limits are exceeded, the calibration * interval is reset to the minimum and we start over. */ u_usec = (long)tick << 1; if (!((cal_sec == -1 && cal_usec > (1000000 - u_usec)) || (cal_sec == 0 && cal_usec < u_usec)) || v_usec > time_tolerance || v_usec < -time_tolerance) { pps_errcnt++; pps_shift = PPS_SHIFT; pps_intcnt = 0; time_status |= STA_PPSERROR; return; } /* * A three-stage median filter is used to help deglitch the pps * frequency. The median sample becomes the frequency offset * estimate; the difference between the other two samples * becomes the frequency dispersion (stability) estimate. */ pps_ff[2] = pps_ff[1]; pps_ff[1] = pps_ff[0]; pps_ff[0] = v_usec; if (pps_ff[0] > pps_ff[1]) { if (pps_ff[1] > pps_ff[2]) { u_usec = pps_ff[1]; /* 0 1 2 */ v_usec = pps_ff[0] - pps_ff[2]; } else if (pps_ff[2] > pps_ff[0]) { u_usec = pps_ff[0]; /* 2 0 1 */ v_usec = pps_ff[2] - pps_ff[1]; } else { u_usec = pps_ff[2]; /* 0 2 1 */ v_usec = pps_ff[0] - pps_ff[1]; } } else { if (pps_ff[1] < pps_ff[2]) { u_usec = pps_ff[1]; /* 2 1 0 */ v_usec = pps_ff[2] - pps_ff[0]; } else if (pps_ff[2] < pps_ff[0]) { u_usec = pps_ff[0]; /* 1 0 2 */ v_usec = pps_ff[1] - pps_ff[2]; } else { u_usec = pps_ff[2]; /* 1 2 0 */ v_usec = pps_ff[1] - pps_ff[0]; } } /* * Here the frequency dispersion (stability) is updated. If it * is less than one-fourth the maximum (MAXFREQ), the frequency * offset is updated as well, but clamped to the tolerance. It * will be processed later by the hardclock() routine. */ v_usec = (v_usec >> 1) - pps_stabil; if (v_usec < 0) pps_stabil -= -v_usec >> PPS_AVG; else pps_stabil += v_usec >> PPS_AVG; if (pps_stabil > MAXFREQ >> 2) { pps_stbcnt++; time_status |= STA_PPSWANDER; return; } if (time_status & STA_PPSFREQ) { if (u_usec < 0) { pps_freq -= -u_usec >> PPS_AVG; if (pps_freq < -time_tolerance) pps_freq = -time_tolerance; u_usec = -u_usec; } else { pps_freq += u_usec >> PPS_AVG; if (pps_freq > time_tolerance) pps_freq = time_tolerance; } } /* * Here the calibration interval is adjusted. If the maximum * time difference is greater than tick / 4, reduce the interval * by half. If this is not the case for four consecutive * intervals, double the interval. */ if (u_usec << pps_shift > bigtick >> 2) { pps_intcnt = 0; if (pps_shift > PPS_SHIFT) pps_shift--; } else if (pps_intcnt >= 4) { pps_intcnt = 0; if (pps_shift < PPS_SHIFTMAX) pps_shift++; } else pps_intcnt++; } #endif /* PPS_SYNC */ #endif /* NTP */ /* timecounter compat functions */ void nanotime(struct timespec *ts) { struct timeval tv; microtime(&tv); TIMEVAL_TO_TIMESPEC(&tv, ts); } void getbinuptime(struct bintime *bt) { struct timeval tv; microtime(&tv); timeval2bintime(&tv, bt); } void nanouptime(struct timespec *tsp) { int s; s = splclock(); TIMEVAL_TO_TIMESPEC(&mono_time, tsp); splx(s); } void getnanouptime(struct timespec *tsp) { int s; s = splclock(); TIMEVAL_TO_TIMESPEC(&mono_time, tsp); splx(s); } void getmicrouptime(struct timeval *tvp) { int s; s = splclock(); *tvp = mono_time; splx(s); } void getnanotime(struct timespec *tsp) { int s; s = splclock(); TIMEVAL_TO_TIMESPEC(&time, tsp); splx(s); } void getmicrotime(struct timeval *tvp) { int s; s = splclock(); *tvp = time; splx(s); } #endif /* !__HAVE_TIMECOUNTER */