/* $NetBSD: umct.c,v 1.9 2002/09/23 05:51:23 simonb Exp $ */ /* * Copyright (c) 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Ichiro FUKUHARA (ichiro@ichiro.org). * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * MCT USB-RS232 Interface Controller * http://www.mct.com.tw/p_u232.html * http://www.dlink.com/products/usb/dsbs25 */ #include __KERNEL_RCSID(0, "$NetBSD: umct.c,v 1.9 2002/09/23 05:51:23 simonb Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef UMCT_DEBUG #define DPRINTFN(n, x) if (umctdebug > (n)) logprintf x int umctdebug = 0; #else #define DPRINTFN(n, x) #endif #define DPRINTF(x) DPRINTFN(0, x) #define UMCT_CONFIG_INDEX 0 #define UMCT_IFACE_INDEX 0 struct umct_softc { USBBASEDEVICE sc_dev; /* base device */ usbd_device_handle sc_udev; /* USB device */ usbd_interface_handle sc_iface; /* interface */ int sc_iface_number; /* interface number */ u_int16_t sc_product; int sc_intr_number; /* interrupt number */ usbd_pipe_handle sc_intr_pipe; /* interrupt pipe */ u_char *sc_intr_buf; /* interrupt buffer */ int sc_isize; usb_cdc_line_state_t sc_line_state; /* current line state */ u_char sc_dtr; /* current DTR state */ u_char sc_rts; /* current RTS state */ u_char sc_break; /* set break */ u_char sc_status; device_ptr_t sc_subdev; /* ucom device */ u_char sc_dying; /* disconnecting */ u_char sc_lsr; /* Local status register */ u_char sc_msr; /* umct status register */ u_int last_lcr; /* keep lcr register */ }; /* * These are the maximum number of bytes transferred per frame. * The output buffer size cannot be increased due to the size encoding. */ #define UMCTIBUFSIZE 256 #define UMCTOBUFSIZE 256 Static void umct_init(struct umct_softc *); Static void umct_set_baudrate(struct umct_softc *, u_int); Static void umct_set_lcr(struct umct_softc *, u_int); Static void umct_intr(usbd_xfer_handle, usbd_private_handle, usbd_status); Static void umct_set(void *, int, int, int); Static void umct_dtr(struct umct_softc *, int); Static void umct_rts(struct umct_softc *, int); Static void umct_break(struct umct_softc *, int); Static void umct_set_line_state(struct umct_softc *); Static void umct_get_status(void *, int portno, u_char *lsr, u_char *msr); Static int umct_param(void *, int, struct termios *); Static int umct_open(void *, int); Static void umct_close(void *, int); struct ucom_methods umct_methods = { umct_get_status, umct_set, umct_param, NULL, umct_open, umct_close, NULL, NULL, }; static const struct usb_devno umct_devs[] = { /* MCT USB-232 Interface Products */ { USB_VENDOR_MCT, USB_PRODUCT_MCT_USB232 }, /* Sitecom USB-232 Products */ { USB_VENDOR_MCT, USB_PRODUCT_MCT_SITECOM_USB232 }, /* D-Link DU-H3SP USB BAY Hub Products */ { USB_VENDOR_MCT, USB_PRODUCT_MCT_DU_H3SP_USB232 }, }; #define umct_lookup(v, p) usb_lookup(umct_devs, v, p) USB_DECLARE_DRIVER(umct); USB_MATCH(umct) { USB_MATCH_START(umct, uaa); if (uaa->iface != NULL) return (UMATCH_NONE); return (umct_lookup(uaa->vendor, uaa->product) != NULL ? UMATCH_VENDOR_PRODUCT : UMATCH_NONE); } USB_ATTACH(umct) { USB_ATTACH_START(umct, sc, uaa); usbd_device_handle dev = uaa->device; usb_config_descriptor_t *cdesc; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; char devinfo[1024]; char *devname = USBDEVNAME(sc->sc_dev); usbd_status err; int i, found; struct ucom_attach_args uca; usbd_devinfo(dev, 0, devinfo); USB_ATTACH_SETUP; printf("%s: %s\n", devname, devinfo); sc->sc_udev = dev; sc->sc_product = uaa->product; DPRINTF(("\n\numct attach: sc=%p\n", sc)); /* initialize endpoints */ uca.bulkin = uca.bulkout = -1; sc->sc_intr_number = -1; sc->sc_intr_pipe = NULL; /* Move the device into the configured state. */ err = usbd_set_config_index(dev, UMCT_CONFIG_INDEX, 1); if (err) { printf("\n%s: failed to set configuration, err=%s\n", devname, usbd_errstr(err)); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } /* get the config descriptor */ cdesc = usbd_get_config_descriptor(sc->sc_udev); if (cdesc == NULL) { printf("%s: failed to get configuration descriptor\n", USBDEVNAME(sc->sc_dev)); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } /* get the interface */ err = usbd_device2interface_handle(dev, UMCT_IFACE_INDEX, &sc->sc_iface); if (err) { printf("\n%s: failed to get interface, err=%s\n", devname, usbd_errstr(err)); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } /* Find the bulk{in,out} and interrupt endpoints */ id = usbd_get_interface_descriptor(sc->sc_iface); sc->sc_iface_number = id->bInterfaceNumber; found = 0; for (i = 0; i < id->bNumEndpoints; i++) { ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); if (ed == NULL) { printf("%s: no endpoint descriptor for %d\n", USBDEVNAME(sc->sc_dev), i); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT && found == 0) { uca.bulkin = ed->bEndpointAddress; found = 1; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { uca.bulkout = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { sc->sc_intr_number = ed->bEndpointAddress; sc->sc_isize = UGETW(ed->wMaxPacketSize); } } if (uca.bulkin == -1) { printf("%s: Could not find data bulk in\n", USBDEVNAME(sc->sc_dev)); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } if (uca.bulkout == -1) { printf("%s: Could not find data bulk out\n", USBDEVNAME(sc->sc_dev)); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } if (sc->sc_intr_number== -1) { printf("%s: Could not find interrupt in\n", USBDEVNAME(sc->sc_dev)); sc->sc_dying = 1; USB_ATTACH_ERROR_RETURN; } sc->sc_dtr = sc->sc_rts = 0; uca.portno = UCOM_UNK_PORTNO; /* bulkin, bulkout set above */ uca.ibufsize = UMCTIBUFSIZE; if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232) uca.obufsize = 16; /* device is broken */ else uca.obufsize = UMCTOBUFSIZE; uca.ibufsizepad = UMCTIBUFSIZE; uca.opkthdrlen = 0; uca.device = dev; uca.iface = sc->sc_iface; uca.methods = &umct_methods; uca.arg = sc; uca.info = NULL; umct_init(sc); usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, USBDEV(sc->sc_dev)); DPRINTF(("umct: in=0x%x out=0x%x intr=0x%x\n", uca.bulkin, uca.bulkout, sc->sc_intr_number )); sc->sc_subdev = config_found_sm(self, &uca, ucomprint, ucomsubmatch); USB_ATTACH_SUCCESS_RETURN; } USB_DETACH(umct) { USB_DETACH_START(umct, sc); int rv = 0; DPRINTF(("umct_detach: sc=%p flags=%d\n", sc, flags)); if (sc->sc_intr_pipe != NULL) { usbd_abort_pipe(sc->sc_intr_pipe); usbd_close_pipe(sc->sc_intr_pipe); free(sc->sc_intr_buf, M_USBDEV); sc->sc_intr_pipe = NULL; } sc->sc_dying = 1; if (sc->sc_subdev != NULL) { rv = config_detach(sc->sc_subdev, flags); sc->sc_subdev = NULL; } usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, USBDEV(sc->sc_dev)); return (rv); } int umct_activate(device_ptr_t self, enum devact act) { struct umct_softc *sc = (struct umct_softc *)self; int rv = 0; switch (act) { case DVACT_ACTIVATE: return (EOPNOTSUPP); case DVACT_DEACTIVATE: if (sc->sc_subdev != NULL) rv = config_deactivate(sc->sc_subdev); sc->sc_dying = 1; break; } return (rv); } void umct_set_line_state(struct umct_softc *sc) { usb_device_request_t req; uByte ls; ls = (sc->sc_dtr ? MCR_DTR : 0) | (sc->sc_rts ? MCR_RTS : 0); DPRINTF(("umct_set_line_state: DTR=%d,RTS=%d,ls=%02x\n", sc->sc_dtr, sc->sc_rts, ls)); req.bmRequestType = UMCT_SET_REQUEST; req.bRequest = REQ_SET_MCR; USETW(req.wValue, 0); USETW(req.wIndex, sc->sc_iface_number); USETW(req.wLength, LENGTH_SET_MCR); (void)usbd_do_request(sc->sc_udev, &req, &ls); } void umct_set(void *addr, int portno, int reg, int onoff) { struct umct_softc *sc = addr; switch (reg) { case UCOM_SET_DTR: umct_dtr(sc, onoff); break; case UCOM_SET_RTS: umct_rts(sc, onoff); break; case UCOM_SET_BREAK: umct_break(sc, onoff); break; default: break; } } void umct_dtr(struct umct_softc *sc, int onoff) { DPRINTF(("umct_dtr: onoff=%d\n", onoff)); if (sc->sc_dtr == onoff) return; sc->sc_dtr = onoff; umct_set_line_state(sc); } void umct_rts(struct umct_softc *sc, int onoff) { DPRINTF(("umct_rts: onoff=%d\n", onoff)); if (sc->sc_rts == onoff) return; sc->sc_rts = onoff; umct_set_line_state(sc); } void umct_break(struct umct_softc *sc, int onoff) { DPRINTF(("umct_break: onoff=%d\n", onoff)); umct_set_lcr(sc, onoff ? sc->last_lcr | LCR_SET_BREAK : sc->last_lcr); } void umct_set_lcr(struct umct_softc *sc, u_int data) { usb_device_request_t req; uByte adata; adata = data; req.bmRequestType = UMCT_SET_REQUEST; req.bRequest = REQ_SET_LCR; USETW(req.wValue, 0); USETW(req.wIndex, sc->sc_iface_number); USETW(req.wLength, LENGTH_SET_LCR); (void)usbd_do_request(sc->sc_udev, &req, &adata); /* XXX should check */ } void umct_set_baudrate(struct umct_softc *sc, u_int rate) { usb_device_request_t req; uDWord arate; u_int val; if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232) { switch (rate) { case 300: val = 0x01; break; case 600: val = 0x02; break; case 1200: val = 0x03; break; case 2400: val = 0x04; break; case 4800: val = 0x06; break; case 9600: val = 0x08; break; case 19200: val = 0x09; break; case 38400: val = 0x0a; break; case 57600: val = 0x0b; break; case 115200: val = 0x0c; break; default: val = -1; break; } } else { val = UMCT_BAUD_RATE(rate); } USETDW(arate, val); req.bmRequestType = UMCT_SET_REQUEST; req.bRequest = REQ_SET_BAUD_RATE; USETW(req.wValue, 0); USETW(req.wIndex, sc->sc_iface_number); USETW(req.wLength, LENGTH_BAUD_RATE); (void)usbd_do_request(sc->sc_udev, &req, arate); /* XXX should check */ } void umct_init(struct umct_softc *sc) { umct_set_baudrate(sc, 9600); umct_set_lcr(sc, LCR_DATA_BITS_8 | LCR_PARITY_NONE | LCR_STOP_BITS_1); } int umct_param(void *addr, int portno, struct termios *t) { struct umct_softc *sc = addr; u_int data = 0; DPRINTF(("umct_param: sc=%p\n", sc)); DPRINTF(("umct_param: BAUDRATE=%d\n", t->c_ospeed)); if (ISSET(t->c_cflag, CSTOPB)) data |= LCR_STOP_BITS_2; else data |= LCR_STOP_BITS_1; if (ISSET(t->c_cflag, PARENB)) { if (ISSET(t->c_cflag, PARODD)) data |= LCR_PARITY_ODD; else data |= LCR_PARITY_EVEN; } else data |= LCR_PARITY_NONE; switch (ISSET(t->c_cflag, CSIZE)) { case CS5: data |= LCR_DATA_BITS_5; break; case CS6: data |= LCR_DATA_BITS_6; break; case CS7: data |= LCR_DATA_BITS_7; break; case CS8: data |= LCR_DATA_BITS_8; break; } umct_set_baudrate(sc, t->c_ospeed); sc->last_lcr = data; umct_set_lcr(sc, data); return (0); } int umct_open(void *addr, int portno) { struct umct_softc *sc = addr; int err, lcr_data; if (sc->sc_dying) return (EIO); DPRINTF(("umct_open: sc=%p\n", sc)); /* initialize LCR */ lcr_data = LCR_DATA_BITS_8 | LCR_PARITY_NONE | LCR_STOP_BITS_1; umct_set_lcr(sc, lcr_data); if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) { sc->sc_status = 0; /* clear status bit */ sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK); err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_intr_number, USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc, sc->sc_intr_buf, sc->sc_isize, umct_intr, USBD_DEFAULT_INTERVAL); if (err) { DPRINTF(("%s: cannot open interrupt pipe (addr %d)\n", USBDEVNAME(sc->sc_dev), sc->sc_intr_number)); return (EIO); } } return (0); } void umct_close(void *addr, int portno) { struct umct_softc *sc = addr; int err; if (sc->sc_dying) return; DPRINTF(("umct_close: close\n")); if (sc->sc_intr_pipe != NULL) { err = usbd_abort_pipe(sc->sc_intr_pipe); if (err) printf("%s: abort interrupt pipe failed: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err)); err = usbd_close_pipe(sc->sc_intr_pipe); if (err) printf("%s: close interrupt pipe failed: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(err)); free(sc->sc_intr_buf, M_USBDEV); sc->sc_intr_pipe = NULL; } } void umct_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) { struct umct_softc *sc = priv; u_char *buf = sc->sc_intr_buf; u_char mstatus, lstatus; if (sc->sc_dying) return; if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) return; DPRINTF(("%s: abnormal status: %s\n", USBDEVNAME(sc->sc_dev), usbd_errstr(status))); usbd_clear_endpoint_stall_async(sc->sc_intr_pipe); return; } DPRINTF(("%s: umct status = MSR:%02x, LSR:%02x\n", USBDEVNAME(sc->sc_dev), buf[0],buf[1])); sc->sc_lsr = sc->sc_msr = 0; mstatus = buf[0]; lstatus = buf[1]; if (ISSET(mstatus, MSR_DSR)) sc->sc_msr |= UMSR_DSR; if (ISSET(mstatus, MSR_DCD)) sc->sc_msr |= UMSR_DCD; ucom_status_change((struct ucom_softc *)sc->sc_subdev); } void umct_get_status(void *addr, int portno, u_char *lsr, u_char *msr) { struct umct_softc *sc = addr; DPRINTF(("umct_get_status:\n")); if (lsr != NULL) *lsr = sc->sc_lsr; if (msr != NULL) *msr = sc->sc_msr; }