/*	$NetBSD: zs_pcc.c,v 1.1 1996/04/26 19:00:24 chuck Exp $	*/

/*
 * Copyright (c) 1996 Jason R. Thorpe
 * Copyright (c) 1995 Gordon W. Ross
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 * 4. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Gordon Ross
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Zilog Z8530 Dual UART driver (machine-dependent part)
 *
 * Runs two serial lines per chip using slave drivers.
 * Plain tty/async lines use the zs_async slave.
 *
 * Modified for NetBSD/mvme68k by Jason R. Thorpe <thorpej@NetBSD.ORG>
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/device.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/ioctl.h>
#include <sys/tty.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <sys/syslog.h>

#include <dev/cons.h>
#include <dev/ic/z8530reg.h>
#include <machine/z8530var.h>

#include <machine/cpu.h>

#include <mvme68k/dev/pccreg.h>
#include <mvme68k/dev/pccvar.h>
#include <mvme68k/dev/zsvar.h>

/*
 * PCC offsets.
 */
static int zs_pcc_offsets[NZS] = { PCC_ZS0_OFF, PCC_ZS1_OFF };

struct zschan *
zs_pcc_get_chan_addr(zsc_unit, channel)
	int zsc_unit, channel;
{
	struct zsdevice *addr;
	struct zschan *zc;

	if (zsc_unit >= NZS)
		return NULL;
	addr = (struct zsdevice *)PCC_VADDR(zs_pcc_offsets[zsc_unit]);
	if (addr == NULL)
		return NULL;
	if (channel == 0) {
		zc = &addr->zs_chan_a;
	} else {
		zc = &addr->zs_chan_b;
	}
	return (zc);
}

/****************************************************************
 * Autoconfig
 ****************************************************************/

/* Definition of the driver for autoconfig. */
static int	zsc_pcc_match __P((struct device *, void *, void *));
static void	zsc_pcc_attach __P((struct device *, struct device *, void *));

struct cfattach zsc_pcc_ca = {
	sizeof(struct zsc_softc), zsc_pcc_match, zsc_pcc_attach
};


/*
 * Is the zs chip present?
 */
static int
zsc_pcc_match(parent, vcf, aux)
	struct device *parent;
	void *vcf, *aux;
{
	struct cfdata *cf = vcf;
	struct pcc_attach_args *pa = aux;
	int unit;

	/* XXX This is bogus; should fix this. */
	unit = cf->cf_unit;
	if (unit < 0 || unit >= NZS)
		return (0);

	if (strcmp(pa->pa_name, zsc_cd.cd_name))
		return (0);

	pa->pa_ipl = cf->pcccf_ipl;
	if (pa->pa_ipl == -1)
		pa->pa_ipl = ZSHARD_PRI;
	return (1);
}

/*
 * Attach a found zs.
 *
 * Match slave number to zs unit number, so that misconfiguration will
 * not set up the keyboard as ttya, etc.
 */
static void
zsc_pcc_attach(parent, self, aux)
	struct device *parent;
	struct device *self;
	void *aux;
{
	struct zsc_softc *zsc = (void *) self;
	struct pcc_attach_args *pa = aux;
	int zs_level, ir;
	static int didintr;

	zs_level = pa->pa_ipl;

	/* Do common parts of SCC configuration. */
	zs_config(zsc, zs_pcc_get_chan_addr);

	/*
	 * Now safe to install interrupt handlers.  Note the arguments
	 * to the interrupt handlers aren't used.  Note, we only do this
	 * once since both SCCs interrupt at the same level and vector.
	 */
	if (didintr == 0) {
		didintr = 1;
		pccintr_establish(PCCV_ZS, zshard, zs_level, zsc);
	}

	/* Sanity check the interrupt levels. */
	ir = sys_pcc->zs_int;
	if (((ir & PCC_IMASK) != 0) &&
	    ((ir & PCC_IMASK) != zs_level))
		panic("zs_pcc_attach: zs configured at different IPLs");

	/*
	 * Set master interrupt enable.  Vector is programmed into
	 * the SCC by the PCC.
	 */
	sys_pcc->zs_int = zs_level | PCC_IENABLE | PCC_ZSEXTERN;
	zs_write_reg(&zsc->zsc_cs[0], 9, zs_init_reg[9]);
}

/****************************************************************
 * Console support functions (MVME PCC specific!)
 ****************************************************************/

/*
 * Check for SCC console.  The MVME-147 always uses unit 0 chan 0.
 */
void
zsc_pcccnprobe(cp)
	struct consdev *cp;
{

#ifdef notyet
	if (cputyp != CPU_147) {
		cp->cn_pri = CN_DEAD;
		return;
	}
#endif

	/* XXX Shouldn't hardcode the minor number... */

	/* Initialize required fields. */
	cp->cn_dev = makedev(ZSTTY_MAJOR, 0);
	cp->cn_pri = CN_NORMAL;
}

void
zsc_pcccninit(cp)
	struct consdev *cp;
{
	int unit, chan;
	struct zschan *zc;

	unit = 0;	/* XXX */
	chan = 0;	/* XXX */
	zc = zs_pcc_get_chan_addr(unit, chan);

	/* Do common parts of console init. */
	zs_cnconfig(unit, chan, zc);
}