/* $NetBSD: zs.c,v 1.12 2000/03/06 04:14:15 deberg Exp $ */ /*- * Copyright (c) 1996 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Gordon W. Ross. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Zilog Z8530 Dual UART driver (machine-dependent part) * * Runs two serial lines per chip using slave drivers. * Plain tty/async lines use the zs_async slave. * Sun keyboard/mouse uses the zs_kbd/zs_ms slaves. */ /* This was snarfed from the netbsd sparc/dev/zs.c at version 1.56 * and then updated to reflect changes in 1.59 * by Darrin B Jewell Mon Mar 30 20:24:46 1998 */ #include "opt_ddb.h" #include "opt_serial.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zsc.h" /* NZSC */ #if (NZSC < 0) #error "No serial controllers?" #endif /* * Some warts needed by z8530tty.c - * The default parity REALLY needs to be the same as the PROM uses, * or you can not see messages done with printf during boot-up... */ int zs_def_cflag = (CREAD | CS8 | HUPCL); int zs_major = 12; /* * The NeXT provides a 3.686400 MHz clock to the ZS chips. */ #if 1 #define PCLK (9600 * 384) /* PCLK pin input clock rate */ #else #define PCLK 10000000 #endif #define ZS_DELAY() delay(2) /* The layout of this is hardware-dependent (padding, order). */ struct zschan { volatile u_char zc_csr; /* ctrl,status, and indirect access */ u_char zc_xxx0; volatile u_char zc_data; /* data */ u_char zc_xxx1; }; static char *zsaddr[NZSC]; /* Flags from cninit() */ static int zs_hwflags[NZSC][2]; /* Default speed for each channel */ static int zs_defspeed[NZSC][2] = { { 9600, /* ttya */ 9600 }, /* ttyb */ }; static u_char zs_init_reg[16] = { 0, /* 0: CMD (reset, etc.) */ 0, /* 1: No interrupts yet. */ 0x18 + NEXT_I_IPL(NEXT_I_SCC), /* 2: IVECT */ ZSWR3_RX_8 | ZSWR3_RX_ENABLE, ZSWR4_CLK_X16 | ZSWR4_ONESB | ZSWR4_EVENP, ZSWR5_TX_8 | ZSWR5_TX_ENABLE, 0, /* 6: TXSYNC/SYNCLO */ 0, /* 7: RXSYNC/SYNCHI */ 0, /* 8: alias for data port */ ZSWR9_MASTER_IE, 0, /*10: Misc. TX/RX control bits */ ZSWR11_TXCLK_BAUD | ZSWR11_RXCLK_BAUD, ((PCLK/32)/9600)-2, /*12: BAUDLO (default=9600) */ 0, /*13: BAUDHI (default=9600) */ ZSWR14_BAUD_ENA | ZSWR14_BAUD_FROM_PCLK, ZSWR15_BREAK_IE, }; struct zschan * zs_get_chan_addr(zs_unit, channel) int zs_unit, channel; { char *addr; struct zschan *zc; if (zs_unit >= NZSC) return (NULL); addr = zsaddr[zs_unit]; if (addr == NULL) return (NULL); if (channel == 0) { /* handle the fact the ports are intertwined. */ zc = (struct zschan *)(addr+1); } else { zc = (struct zschan *)(addr); } return (zc); } /**************************************************************** * Autoconfig ****************************************************************/ /* Definition of the driver for autoconfig. */ static int zs_match __P((struct device *, struct cfdata *, void *)); static void zs_attach __P((struct device *, struct device *, void *)); static int zs_print __P((void *, const char *name)); extern int zs_getc __P((void *arg)); extern void zs_putc __P((void *arg, int c)); struct cfattach zsc_ca = { sizeof(struct zsc_softc), zs_match, zs_attach }; extern struct cfdriver zsc_cd; /* Interrupt handlers. */ static int zshard __P((void *)); static int zssoft __P((void *)); static int zs_get_speed __P((struct zs_chanstate *)); /* * Is the zs chip present? */ static int zs_match(parent, cf, aux) struct device *parent; struct cfdata *cf; void *aux; { return(1); } /* * Attach a found zs. * * USE ROM PROPERTIES port-a-ignore-cd AND port-b-ignore-cd FOR * SOFT CARRIER, AND keyboard PROPERTY FOR KEYBOARD/MOUSE? */ static void zs_attach(parent, self, aux) struct device *parent; struct device *self; void *aux; { struct zsc_softc *zsc = (void *) self; struct zsc_attach_args zsc_args; volatile struct zschan *zc; struct zs_chanstate *cs; int s, zs_unit, channel; printf("\n"); zs_unit = zsc->zsc_dev.dv_unit; if (zsaddr[zs_unit] == NULL) panic("zs_attach: zs%d not mapped\n", zs_unit); /* * Initialize software state for each channel. */ for (channel = 0; channel < 2; channel++) { zsc_args.channel = channel; zsc_args.hwflags = zs_hwflags[zs_unit][channel]; cs = &zsc->zsc_cs_store[channel]; zsc->zsc_cs[channel] = cs; cs->cs_channel = channel; cs->cs_private = NULL; cs->cs_ops = &zsops_null; cs->cs_brg_clk = PCLK / 16; zc = zs_get_chan_addr(zs_unit, channel); cs->cs_reg_csr = &zc->zc_csr; cs->cs_reg_data = &zc->zc_data; bcopy(zs_init_reg, cs->cs_creg, 16); bcopy(zs_init_reg, cs->cs_preg, 16); /* XXX: Get these from the PROM properties! */ /* XXX: See the mvme167 code. Better. */ if (zsc_args.hwflags & ZS_HWFLAG_CONSOLE) cs->cs_defspeed = zs_get_speed(cs); else cs->cs_defspeed = zs_defspeed[zs_unit][channel]; cs->cs_defcflag = zs_def_cflag; /* Make these correspond to cs_defcflag (-crtscts) */ cs->cs_rr0_dcd = ZSRR0_DCD; cs->cs_rr0_cts = 0; cs->cs_wr5_dtr = ZSWR5_DTR | ZSWR5_RTS; cs->cs_wr5_rts = 0; /* * Clear the master interrupt enable. * The INTENA is common to both channels, * so just do it on the A channel. */ if (channel == 0) { zs_write_reg(cs, 9, 0); } /* * Look for a child driver for this channel. * The child attach will setup the hardware. */ if (!config_found(self, (void *)&zsc_args, zs_print)) { /* No sub-driver. Just reset it. */ u_char reset = (channel == 0) ? ZSWR9_A_RESET : ZSWR9_B_RESET; s = splzs(); zs_write_reg(cs, 9, reset); splx(s); } } isrlink_autovec(zshard, NULL, NEXT_I_IPL(NEXT_I_SCC), 0); INTR_ENABLE(NEXT_I_SCC); { int sir; sir = allocate_sir(zssoft, zsc); if (sir != SIR_SERIAL) { panic("Unexpected zssoft sir"); } } /* * Set the master interrupt enable and interrupt vector. * (common to both channels, do it on A) */ cs = zsc->zsc_cs[0]; s = splhigh(); /* interrupt vector */ zs_write_reg(cs, 2, zs_init_reg[2]); /* master interrupt control (enable) */ zs_write_reg(cs, 9, zs_init_reg[9]); splx(s); } static int zs_print(aux, name) void *aux; const char *name; { struct zsc_attach_args *args = aux; if (name != NULL) printf("%s: ", name); if (args->channel != -1) printf(" channel %d", args->channel); return (UNCONF); } static volatile int zssoftpending; /* * Our ZS chips all share a common, autovectored interrupt, * so we have to look at all of them on each interrupt. */ static int zshard(arg) void *arg; { register struct zsc_softc *zsc; register int unit, rr3, rval, softreq; if (!INTR_OCCURRED(NEXT_I_SCC)) return 0; rval = softreq = 0; for (unit = 0; unit < zsc_cd.cd_ndevs; unit++) { zsc = zsc_cd.cd_devs[unit]; if (zsc == NULL) continue; rr3 = zsc_intr_hard(zsc); /* Count up the interrupts. */ if (rr3) { rval |= rr3; zsc->zsc_intrcnt.ev_count++; } softreq |= zsc->zsc_cs[0]->cs_softreq; softreq |= zsc->zsc_cs[1]->cs_softreq; } /* We are at splzs here, so no need to lock. */ if (softreq && (zssoftpending == 0)) { zssoftpending = 1; setsoftserial(); } return(1); } /* * Similar scheme as for zshard (look at all of them) */ static int zssoft(arg) void *arg; { register struct zsc_softc *zsc; register int s, unit; /* This is not the only ISR on this IPL. */ if (zssoftpending == 0) return (0); /* * The soft intr. bit will be set by zshard only if * the variable zssoftpending is zero. The order of * these next two statements prevents our clearing * the soft intr bit just after zshard has set it. */ /* ienab_bic(IE_ZSSOFT); */ zssoftpending = 0; /* Make sure we call the tty layer at spltty. */ s = spltty(); for (unit = 0; unit < zsc_cd.cd_ndevs; unit++) { zsc = zsc_cd.cd_devs[unit]; if (zsc == NULL) continue; (void)zsc_intr_soft(zsc); } splx(s); return (1); } /* * Compute the current baud rate given a ZS channel. */ static int zs_get_speed(cs) struct zs_chanstate *cs; { int tconst; tconst = zs_read_reg(cs, 12); tconst |= zs_read_reg(cs, 13) << 8; return (TCONST_TO_BPS(cs->cs_brg_clk, tconst)); } /* * MD functions for setting the baud rate and control modes. */ int zs_set_speed(cs, bps) struct zs_chanstate *cs; int bps; /* bits per second */ { int tconst, real_bps; if (bps == 0) return (0); #ifdef DIAGNOSTIC if (cs->cs_brg_clk == 0) panic("zs_set_speed"); #endif tconst = BPS_TO_TCONST(cs->cs_brg_clk, bps); if (tconst < 0) return (EINVAL); /* Convert back to make sure we can do it. */ real_bps = TCONST_TO_BPS(cs->cs_brg_clk, tconst); /* XXX - Allow some tolerance here? */ if (real_bps != bps) return (EINVAL); cs->cs_preg[12] = tconst; cs->cs_preg[13] = tconst >> 8; /* Caller will stuff the pending registers. */ return (0); } int zs_set_modes(cs, cflag) struct zs_chanstate *cs; int cflag; /* bits per second */ { int s; /* * Output hardware flow control on the chip is horrendous: * if carrier detect drops, the receiver is disabled, and if * CTS drops, the transmitter is stoped IN MID CHARACTER! * Therefore, NEVER set the HFC bit, and instead use the * status interrupt to detect CTS changes. */ s = splzs(); cs->cs_rr0_pps = 0; if ((cflag & (CLOCAL | MDMBUF)) != 0) { cs->cs_rr0_dcd = 0; if ((cflag & MDMBUF) == 0) cs->cs_rr0_pps = ZSRR0_DCD; } else cs->cs_rr0_dcd = ZSRR0_DCD; if ((cflag & CRTSCTS) != 0) { cs->cs_wr5_dtr = ZSWR5_DTR; cs->cs_wr5_rts = ZSWR5_RTS; cs->cs_rr0_cts = ZSRR0_CTS; } else if ((cflag & CDTRCTS) != 0) { cs->cs_wr5_dtr = 0; cs->cs_wr5_rts = ZSWR5_DTR; cs->cs_rr0_cts = ZSRR0_CTS; } else if ((cflag & MDMBUF) != 0) { cs->cs_wr5_dtr = 0; cs->cs_wr5_rts = ZSWR5_DTR; cs->cs_rr0_cts = ZSRR0_DCD; } else { cs->cs_wr5_dtr = ZSWR5_DTR | ZSWR5_RTS; cs->cs_wr5_rts = 0; cs->cs_rr0_cts = 0; } splx(s); /* Caller will stuff the pending registers. */ return (0); } /* * Read or write the chip with suitable delays. */ u_char zs_read_reg(cs, reg) struct zs_chanstate *cs; u_char reg; { u_char val; *cs->cs_reg_csr = reg; ZS_DELAY(); val = *cs->cs_reg_csr; ZS_DELAY(); return (val); } void zs_write_reg(cs, reg, val) struct zs_chanstate *cs; u_char reg, val; { *cs->cs_reg_csr = reg; ZS_DELAY(); *cs->cs_reg_csr = val; ZS_DELAY(); } u_char zs_read_csr(cs) struct zs_chanstate *cs; { register u_char val; val = *cs->cs_reg_csr; ZS_DELAY(); return (val); } void zs_write_csr(cs, val) struct zs_chanstate *cs; u_char val; { *cs->cs_reg_csr = val; ZS_DELAY(); } u_char zs_read_data(cs) struct zs_chanstate *cs; { register u_char val; val = *cs->cs_reg_data; ZS_DELAY(); return (val); } void zs_write_data(cs, val) struct zs_chanstate *cs; u_char val; { *cs->cs_reg_data = val; ZS_DELAY(); } /**************************************************************** * Console support functions (Sun specific!) * Note: this code is allowed to know about the layout of * the chip registers, and uses that to keep things simple. * XXX - I think I like the mvme167 code better. -gwr ****************************************************************/ extern void Debugger __P((void)); void *zs_conschan; int zs_consunit = 0; /* * Handle user request to enter kernel debugger. */ void zs_abort(cs) struct zs_chanstate *cs; { #if defined(ZS_CONSOLE_ABORT) register volatile struct zschan *zc = zs_conschan; int rr0; /* Wait for end of break to avoid PROM abort. */ /* XXX - Limit the wait? */ do { rr0 = zc->zc_csr; ZS_DELAY(); } while (rr0 & ZSRR0_BREAK); #if defined(KGDB) zskgdb(cs); #elif defined(DDB) Debugger(); #else /* XXX eventually, drop into next rom monitor here */ printf("stopping on keyboard abort not supported without DDB or KGDB\n"); #endif #else /* !ZS_CONSOLE_ABORT */ return; #endif } /* * Polled input char. */ int zs_getc(arg) void *arg; { register volatile struct zschan *zc = arg; register int s, c, rr0; s = splhigh(); /* Wait for a character to arrive. */ do { rr0 = zc->zc_csr; ZS_DELAY(); } while ((rr0 & ZSRR0_RX_READY) == 0); c = zc->zc_data; ZS_DELAY(); splx(s); /* * This is used by the kd driver to read scan codes, * so don't translate '\r' ==> '\n' here... */ return (c); } /* * Polled output char. */ void zs_putc(arg, c) void *arg; int c; { register volatile struct zschan *zc = arg; register int s, rr0; s = splhigh(); /* Wait for transmitter to become ready. */ do { rr0 = zc->zc_csr; ZS_DELAY(); } while ((rr0 & ZSRR0_TX_READY) == 0); zc->zc_data = c; ZS_DELAY(); splx(s); } /*****************************************************************/ void zscninit __P((struct consdev *)); int zscngetc __P((dev_t)); void zscnputc __P((dev_t, int)); void zscnprobe __P((struct consdev *)); extern int zsopen __P(( dev_t dev, int flags, int mode, struct proc *p)); void zscnprobe(cp) struct consdev * cp; { int maj; for (maj = 0; maj < nchrdev; maj++) { if (cdevsw[maj].d_open == zsopen) { break; } } if (maj != nchrdev) { #ifdef SERCONSOLE cp->cn_pri = CN_REMOTE; #else cp->cn_pri = CN_NORMAL; /* Lower than CN_INTERNAL */ #endif zs_major = maj; zs_consunit = 0; zsaddr[0] = (void *)IIOV(NEXT_P_SCC); cp->cn_dev = makedev(maj, zs_consunit); zs_conschan = zs_get_chan_addr(0, zs_consunit); } else { cp->cn_pri = CN_DEAD; } } void zscninit(cn) struct consdev *cn; { zs_hwflags[0][zs_consunit] = ZS_HWFLAG_CONSOLE; { struct zs_chanstate xcs; struct zs_chanstate *cs; volatile struct zschan *zc; int tconst, s; /* Setup temporary chanstate. */ bzero((caddr_t)&xcs, sizeof(xcs)); cs = &xcs; zc = zs_conschan; cs->cs_reg_csr = &zc->zc_csr; cs->cs_reg_data = &zc->zc_data; cs->cs_channel = zs_consunit; cs->cs_brg_clk = PCLK / 16; bcopy(zs_init_reg, cs->cs_preg, 16); cs->cs_preg[5] |= ZSWR5_DTR | ZSWR5_RTS; cs->cs_preg[15] = ZSWR15_BREAK_IE; tconst = BPS_TO_TCONST(cs->cs_brg_clk, zs_defspeed[0][zs_consunit]); cs->cs_preg[12] = tconst; cs->cs_preg[13] = tconst >> 8; /* can't use zs_set_speed as we haven't set up the * signal sources, and it's not worth it for now */ cs->cs_preg[9] &= ~ZSWR9_MASTER_IE; /* no interrupts until later, after attach. */ s = splhigh(); zs_loadchannelregs(cs); splx(s); } printf("\nNetBSD/next68k console\n"); } /* * Polled console input putchar. */ int zscngetc(dev) dev_t dev; { return (zs_getc(zs_conschan)); } /* * Polled console output putchar. */ void zscnputc(dev, c) dev_t dev; int c; { zs_putc(zs_conschan, c); } /*****************************************************************/