/* $NetBSD: icom.h,v 1.1.1.1 2000/03/29 12:38:48 simonb Exp $ */ /* * Header file for ICOM radios */ #include "ntp_types.h" /* * Common definitions */ #define P_ERMSG 0x1 /* trace bus error messages */ #define P_TRACE 0x2 /* trace CI-V messges */ #define RETRY 3 /* max packet retries */ #define IBAUD B1200 /* autotune port speed */ /* * Radio identifier codes */ #define IC1271 0x24 #define IC1275 0x18 #define IC271 0x20 #define IC275 0x10 #define IC375 0x12 #define IC471 0x22 #define IC475 0x14 #define IC575 0x16 #define IC725 0x28 #define IC726 0x30 #define IC735 0x04 #define IC751 0x1c #define IC761 0x1e #define IC765 0x2c #define IC775 0x46 #define IC781 0x26 #define IC970 0x2e #define R7000 0x08 #define R71 0x1a #define R7100 0x34 #define R72 0x32 #define R8500 0x4a #define R9000 0x2a /* * CI-V frame codes */ #define PR 0xfe /* preamble */ #define TX 0xe0 /* controller address */ #define FI 0xfd /* end of message */ #define ACK 0xfb /* controller normal reply */ #define NAK 0xfa /* controller error reply */ #define PAD 0xff /* transmit padding */ /* * CI-V controller commands */ #define V_FREQT 0x00 /* freq set (transceive) */ #define V_MODET 0x01 /* set mode (transceive) */ #define V_RBAND 0x02 /* read band edge */ #define V_RFREQ 0x03 /* read frequency */ #define V_RMODE 0x04 /* read mode */ #define V_SFREQ 0x05 /* set frequency */ #define V_SMODE 0x06 /* set mode */ #define V_SVFO 0x07 /* select vfo */ #define V_SMEM 0x08 /* select channel/bank */ #define V_WRITE 0x09 /* write channel */ #define V_VFOM 0x0a /* memory -> vfo */ #define V_CLEAR 0x0b /* clear channel */ #define V_ROFFS 0x0c /* read tx offset */ #define V_SOFFS 0x0d /* write tx offset */ #define V_SCAN 0x0e /* scan control */ #define V_SPLIT 0x0f /* split control */ #define V_DIAL 0x10 /* set dial tuning step */ #define V_ATTEN 0x11 /* set attenuator */ #define V_SANT 0x12 /* select antenna */ #define V_ANNC 0x13 /* announce control */ #define V_WRCTL 0x14 /* write controls */ #define V_RDCTL 0x15 /* read controls */ #define V_TOGL 0x16 /* set switches */ #define V_ASCII 0x17 /* send CW message */ #define V_POWER 0x18 /* power control */ #define V_RDID 0x19 /* read model ID */ #define V_SETW 0x1a /* read/write channel/bank data */ #define V_CTRL 0x7f /* miscellaneous control */ /* * Function prototypes */ int icom_init P((char *, int, int)); int icom_freq P((int, int, double));