CVS port to VMS DISCLAIMER: This port must be considered experimental. Although previous versions have been in use at one large site since about October, 1995, and the port is believed to be quite usable, various VMS-specific quirks are known and the port cannot be considered as mature as the ports to, say, Windows NT or unix. As always, future progress of this port will depend on volunteer and customer interest. This port is of the CVS client only. Or in other words, the port implements the full set of CVS commands, but cannot access repositories located on the local machine. The repository must live on another machine (a Unix box) which runs a complete port of CVS. Most (all?) work to date has been done on OpenVMS/AXP 6.2. Other VMS variants might work too. Provided that both your client and your server are recent (for example, CVS 1.9.27 or later), you shouldn't need GNU patch or any other executables other than CVS.EXE. Please send bug reports to bug-cvs@gnu.org. As of CVS 1.5.something, this port passed most of the tests in [.src]sanity.sh. I say "most" because some tests to not apply to the CVS client. The tests were run by hand because the VMS POSIX shell was incapable of running the script. The tests that sanity.sh provides are not conclusive but at least provides some assurance that the client is usable. To compile, you will need DEC C (CC), DEC UCX, and of course DCL installed on your machine. Just type "@build" in the top level directory. This will build the sources in each subdirectory, and link the executable [.src]cvs.exe Copy the executable to an appropriate directory, and define the symbol "CVS" in a .COM file which everyone running CVS will need to run. Here's an example of what needs to be done. $ CVS :== $YOUR_DEVICE:[YOUR.DIRECTORY.CVS]CVS.EXE Accessing a remote repository can happen in several ways. 1. pserver 2. rsh - privileged (default) 3. rsh - unprivileged (on VMS side) Here's how to do each of the above: ------------------------------------------------------------------------------- 1. pserver. This is the preferred way. It works just as it is documented in the CVS manual (see the README file in the CVS distribution for more information on the manual). ------------------------------------------------------------------------------- 2. Using CVS internal rsh support (privileged) VMS's RSH is unusable for CVS's purposes (that is, the one in UCX. Don't know about Multinet). However, there is code within CVS to emulate RSH for purposes of contacting a CVS server "in the usual way" via rshd. Unfortunately, this requires the VMS CVS client to be installed with OPER privilege, by your system administrator. RSH uses privileged ports and trusted software/hosts to determine which user on the client side is trying to connect. Part of this security is due to the fact that on VMS or UNIX, a non privileged process is not permitted to bind a socket to a privileged port. If rshd receives a connection on a non-privileged port, the connection is immediately aborted. Only connections arriving from a privileged port will be authenticated and served. The CVS client will therefore need privileges under VMS to produce such a connection. *** Please note that no careful examination has been done of the security implications of installing CVS with the OPER privilege. If some hole exists, then by doing so, you will enable users who are already on your system to gain unauthorized privileges *** ------------------------------------------------------------------------------- 3. Using CVS internal rsh support (non-privileged) There is a workaround, but this is one case where I think the cure is worse than the disease. If you patch an rshd to not care that the RSH originating port is "non-privileged", the CVS VMS client will allow you to define the logical CVS_RCMD_PORT to the port number where this patched rshd will be listening. I leave the talk of patching rshd to the gentle reader and his/her friendly system administrator. If I put an entry in my /etc/services file: cvs_rcmd 4381/tcp cvs_rcmd And add a line to /etc/inetd.conf, then restart inetd via "kill -1" cvs_rcmd stream tcp nowait root /usr/sbin/tcpd /usr/local/sbin/cvs_rcmd On the VMS side, you will have to do this: $ define CVS_RCMD_PORT 4381 Then run CVS in the "usual way". Note that the patched rshd will need to be invoked via inetd as root, so it can authenticate and _become_ the intended user, the same as the regular rshd. ***Please note that you will be installing a security hole by doing this.*** Please also note that this security hole is no larger than allowing a Macintosh, PC (OS/2, NT, etc.) to have it's hostname in any .rhosts file, as any user can create a privileged socket without authentication, under these environments. In fact, existing ports of CVS to these environment use this to their advantage. ------------------------------------------------------------------------------- Wildcard expansion is not yet implemented (i.e. CVS COMMIT *.c won't work.) I think that expand_wild should be calling lib$findfile (util.c in gzip is said to provide an example), but noone has gotten around to implementing this. Log messages must be entered on the command line using -m or -F. You can use -e or define the logical EDITOR to cause CVS to try other editors (TPU.EXE or any other editor which wants DCL command parsing will not work) if you want to test what's available on your system. I haven't tested this, but if you install vi or emacs, chances are it will probably work. Just make sure the .EXE files are in a directory listed in VAXC$PATH (is this a typo for DCL$PATH? Also, will a logical name work?). If someone gets around to implementing it, we should probably be using the callable editors (e.g. TPU$TPU), although of course we also need interface(s) which are not locked into any particular editors. ---------------------------------------- Notes regarding compiling on VAX/VMS 6.2 (not Alpha) (These are items which hopefully will have cleaner solutions in the future, but here is how to get around them for now): * Need to compile lib/getdate.c with vaxc instead of decc to avoid a compiler bugcheck. Therefore one must add SYS$LIBRARY:VAXCRTL/LIBRARY to the link. * In src/ignore.c, change lstat to stat. In vms/filesubr.c, change "#ifdef S_ISLNK" to "#if 0". * Ignore the warnings in vms/vmsmunch.c; the system include file declares something as an int when it should be void *. Not *our* fault! * Remove the #define's of mode_t in vms/vms.h and pid_t in vms/pwd.h. Add "#include " in vms/pwd.h. Credits: Initial VMS port by Benjamin J. Lee , Cyclic Software, October 1, 1995 (Update March 1, 1996).