/* * Copyright (c) 1994 Charles Hannum. * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)wd.c 7.2 (Berkeley) 5/9/91 * $Id: wd.c,v 1.95 1994/10/20 16:19:08 mycroft Exp $ */ #define INSTRUMENT /* instrumentation stuff by Brad Parker */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INSTRUMENT #include #endif #include #include #include #ifndef NEWCONFIG #include #endif #include #include #include #define WDCNDELAY 100000 /* delay = 100us; so 10s for a controller state change */ #define WDCDELAY 100 #define RECOVERYTIME hz/2 /* time to recover from an error */ #if 0 /* If you enable this, it will report any delays more than 100us * N long. */ #define WDCNDELAY_DEBUG 10 #endif #define WDIORETRIES 5 /* number of retries before giving up */ #define WDUNIT(dev) DISKUNIT(dev) #define WDPART(dev) DISKPART(dev) #define MAKEWDDEV(maj, unit, part) MAKEDISKDEV(maj, unit, part) #define WDLABELDEV(dev) (MAKEWDDEV(major(dev), WDUNIT(dev), RAW_PART)) #define b_cylin b_resid /* cylinder number for doing IO to */ /* shares an entry in the buf struct */ /* * Drive states. Used to initialize drive. */ #define CLOSED 0 /* disk is closed */ #define RECAL 1 /* recalibrate */ #define RECAL_WAIT 2 /* done recalibrating */ #define GEOMETRY 3 /* upload geometry */ #define GEOMETRY_WAIT 4 /* done uploading geometry */ #define OPEN 5 /* done with open */ /* * Drive status. */ struct wd_softc { struct device sc_dev; struct dkdevice sc_dk; long sc_bcount; /* byte count left */ long sc_mbcount; /* total byte count left */ short sc_skip; /* blocks already transferred */ short sc_mskip; /* blocks already transferred for multi */ char sc_drive; /* physical unit number */ char sc_state; /* control state */ u_char sc_flags; /* drive characteistics found */ #define WDF_BSDLABEL 0x01 /* has a BSD disk label */ #define WDF_BADSECT 0x02 /* has a bad144 badsector table */ #define WDF_WRITEPROT 0x04 /* manual unit write protect */ #define WDF_WLABEL 0x08 /* label is writable */ TAILQ_ENTRY(wd_softc) sc_drivechain; struct buf sc_q; struct wdparams sc_params; /* ESDI/IDE drive/controller parameters */ long sc_badsect[127]; /* 126 plus trailing -1 marker */ }; struct wdc_softc { struct device sc_dev; struct intrhand sc_ih; u_char sc_flags; #define WDCF_ACTIVE 0x00001 /* controller is active */ #define WDCF_SINGLE 0x00004 /* sector at a time mode */ #define WDCF_ERROR 0x00008 /* processing a disk error */ u_char sc_status; /* copy of status register */ u_char sc_error; /* copy of error register */ u_short sc_iobase; /* i/o port base */ int sc_timeout; /* timeout counter */ int sc_errors; /* count of errors during current transfer */ TAILQ_HEAD(drivehead, wd_softc) sc_drives; }; int wdcprobe(), wdprobe(), wdcintr(); void wdcattach(), wdattach(); struct cfdriver wdccd = { NULL, "wdc", wdcprobe, wdcattach, DV_DULL, sizeof(struct wd_softc) }; struct cfdriver wdcd = { NULL, "wd", wdprobe, wdattach, DV_DISK, sizeof(struct wd_softc) }; void wdfinish __P((struct wd_softc *, struct buf *)); static void wdstart __P((struct wd_softc *)); static void wdcstart __P((struct wdc_softc *)); static int wdcommand __P((struct wd_softc *, int, int, int, int, int)); static int wdcontrol __P((struct wd_softc *)); static int wdsetctlr __P((struct wd_softc *)); static int wdgetctlr __P((struct wd_softc *)); static void bad144intern __P((struct wd_softc *)); static int wdcreset __P((struct wdc_softc *)); static void wdcrestart __P((void *arg)); static void wdcunwedge __P((struct wdc_softc *)); static void wdctimeout __P((void *arg)); void wddisksort __P((struct buf *, struct buf *)); static void wderror __P((void *, struct buf *, char *)); int wdcwait __P((struct wdc_softc *, int)); /* ST506 spec says that if READY or SEEKCMPLT go off, then the read or write command is aborted. */ #define wait_for_drq(d) wdcwait(d, WDCS_READY | WDCS_SEEKCMPLT | WDCS_DRQ) #define wait_for_ready(d) wdcwait(d, WDCS_READY | WDCS_SEEKCMPLT) #define wait_for_unbusy(d) wdcwait(d, 0) /* * Probe for controller. */ int wdcprobe(parent, self, aux) struct device *parent, *self; void *aux; { struct wdc_softc *wdc = (void *)self; struct isa_attach_args *ia = aux; struct wd_softc *wd; u_short iobase; wdc->sc_iobase = iobase = ia->ia_iobase; /* Check if we have registers that work. */ outb(iobase+wd_error, 0x5a); /* Error register not writable. */ outb(iobase+wd_cyl_lo, 0xa5); /* But all of cyllo are implemented. */ if (inb(iobase+wd_error) == 0x5a || inb(iobase+wd_cyl_lo) != 0xa5) return 0; if (wdcreset(wdc) != 0) { delay(500000); if (wdcreset(wdc) != 0) return 0; } /* * XXX wdcommand() accepts a wd_softc, so we have to make it one. */ wd = (void *)malloc(sizeof(struct wd_softc), M_TEMP, M_NOWAIT); bzero(wd, sizeof(struct wd_softc)); wd->sc_drive = 0; wd->sc_dev.dv_unit = 0; wd->sc_dev.dv_parent = (void *)wdc; /* Execute a controller only command. */ if (wdcommand(wd, 0, 0, 0, 0, WDCC_DIAGNOSE) != 0 || wait_for_unbusy(wdc) != 0) goto lose; free(wd, M_TEMP); ia->ia_iosize = 8; ia->ia_msize = 0; return 1; lose: free(wd, M_TEMP); return 0; } struct wdc_attach_args { int wa_drive; }; int wdprint(aux, wdc) void *aux; char *wdc; { struct wdc_attach_args *wa = aux; if (!wdc) printf(" drive %d", wa->wa_drive); return QUIET; } void wdcattach(parent, self, aux) struct device *parent, *self; void *aux; { struct wdc_softc *wdc = (void *)self; struct isa_attach_args *ia = aux; struct wdc_attach_args wa; printf("\n"); for (wa.wa_drive = 0; wa.wa_drive < 2; wa.wa_drive++) (void)config_found(self, &wa, wdprint); TAILQ_INIT(&wdc->sc_drives); wdctimeout(wdc); wdc->sc_ih.ih_fun = wdcintr; wdc->sc_ih.ih_arg = wdc; wdc->sc_ih.ih_level = IPL_BIO; intr_establish(ia->ia_irq, &wdc->sc_ih); } int wdprobe(parent, self, aux) struct device *parent, *self; void *aux; { struct wd_softc *wd = (void *)self; struct cfdata *cf = wd->sc_dev.dv_cfdata; struct wdc_attach_args *wa = aux; int drive = wa->wa_drive; #ifdef NEWCONFIG #define cf_drive cf_loc[0] if (cf->cf_drive != -1 && cf->cf_drive != drive) return 0; #undef cf_drive #else struct isa_device *id = (void *)cf->cf_loc; if (id->id_physid != -1 && id->id_physid != drive) return 0; #endif wd->sc_drive = drive; if (wdgetctlr(wd) != 0) return 0; return 1; } void wdattach(parent, self, aux) struct device *parent, *self; void *aux; { struct wd_softc *wd = (void *)self; int i, blank; if (wd->sc_params.wdp_heads == 0) printf(": (unknown size) <"); else printf(": %dMB %d cyl, %d head, %d sec, %d bytes/sec <", wd->sc_dk.dk_label.d_ncylinders * wd->sc_dk.dk_label.d_secpercyl / (1048576 / wd->sc_dk.dk_label.d_secsize), wd->sc_dk.dk_label.d_ncylinders, wd->sc_dk.dk_label.d_ntracks, wd->sc_dk.dk_label.d_nsectors, wd->sc_dk.dk_label.d_secsize); for (i = blank = 0; i < sizeof(wd->sc_params.wdp_model); i++) { char c = wd->sc_params.wdp_model[i]; if (c == '\0') break; if (c != ' ') { if (blank) printf(" %c", c); else printf("%c", c); blank = 0; } else blank = 1; } printf(">\n"); } /* * Read/write routine for a buffer. Finds the proper unit, range checks * arguments, and schedules the transfer. Does not wait for the transfer to * complete. Multi-page transfers are supported. All I/O requests must be a * multiple of a sector in length. */ void wdstrategy(bp) struct buf *bp; { struct wd_softc *wd; /* disk unit to do the IO */ int lunit = WDUNIT(bp->b_dev); int s; /* Valid unit, controller, and request? */ if (lunit >= wdcd.cd_ndevs || (wd = wdcd.cd_devs[lunit]) == 0 || bp->b_blkno < 0 || (bp->b_bcount % DEV_BSIZE) != 0 || (bp->b_bcount / DEV_BSIZE) >= (1 << NBBY)) { bp->b_error = EINVAL; goto bad; } /* "Soft" write protect check. */ if ((wd->sc_flags & WDF_WRITEPROT) && (bp->b_flags & B_READ) == 0) { bp->b_error = EROFS; goto bad; } /* If it's a null transfer, return immediately. */ if (bp->b_bcount == 0) goto done; /* Have partitions and want to use them? */ if (WDPART(bp->b_dev) != RAW_PART) { if ((wd->sc_flags & WDF_BSDLABEL) == 0) { bp->b_error = EIO; goto bad; } /* * Do bounds checking, adjust transfer. if error, process. * If end of partition, just return. */ if (bounds_check_with_label(bp, &wd->sc_dk.dk_label, (wd->sc_flags & WDF_WLABEL) != 0) <= 0) goto done; /* Otherwise, process transfer request. */ } /* Don't bother doing rotational optimization. */ bp->b_cylin = 0; /* Queue transfer on drive, activate drive and controller if idle. */ s = splbio(); wddisksort(&wd->sc_q, bp); if (!wd->sc_q.b_active) wdstart(wd); /* Start drive. */ #ifdef DIAGNOSTIC else { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; if ((wdc->sc_flags & WDCF_ACTIVE) == 0) { printf("wdstrategy: controller inactive\n"); wdcstart(wdc); } } #endif splx(s); return; bad: bp->b_flags |= B_ERROR; done: /* Toss transfer; we're done early. */ biodone(bp); } /* * Need to skip over multitransfer bufs. */ void wddisksort(dp, bp) struct buf *dp, *bp; { struct buf *ap; while ((ap = dp->b_actf) && ap->b_flags & B_XXX) dp = ap; disksort(dp, bp); } /* * Routine to queue a command to the controller. The unit's request is linked * into the active list for the controller. If the controller is idle, the * transfer is started. */ static void wdstart(wd) struct wd_softc *wd; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; int active = wdc->sc_drives.tqh_first != 0; /* Link onto controller queue. */ wd->sc_q.b_active = 1; TAILQ_INSERT_TAIL(&wdc->sc_drives, wd, sc_drivechain); /* If controller not already active, start it. */ if (!active) wdcstart(wdc); } void wdfinish(wd, bp) struct wd_softc *wd; struct buf *bp; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; #ifdef INSTRUMENT dk_busy &= ~(1 << wd->sc_dev.dv_unit); #endif wdc->sc_flags &= ~(WDCF_SINGLE | WDCF_ERROR); wdc->sc_errors = 0; /* * If this is the only buf or the last buf in the transfer (taking into * account any residual, in case we erred)... */ wd->sc_mbcount -= wd->sc_bcount; if (wd->sc_mbcount == 0) { wd->sc_mskip = 0; /* * ...then move this drive to the end of the queue to give * others a `fair' chance. */ if (wd->sc_drivechain.tqe_next) { TAILQ_REMOVE(&wdc->sc_drives, wd, sc_drivechain); if (bp->b_actf) { TAILQ_INSERT_TAIL(&wdc->sc_drives, wd, sc_drivechain); } else wd->sc_q.b_active = 0; } } bp->b_resid = wd->sc_bcount; bp->b_flags &= ~B_XXX; wd->sc_skip = 0; wd->sc_q.b_actf = bp->b_actf; biodone(bp); } /* * Controller startup routine. This does the calculation, and starts a * single-sector read or write operation. Called to start a transfer, or from * the interrupt routine to continue a multi-sector transfer. * RESTRICTIONS: * 1. The transfer length must be an exact multiple of the sector size. */ static void wdcstart(wdc) struct wdc_softc *wdc; { struct wd_softc *wd; /* disk unit for IO */ struct buf *bp; loop: /* Is there a drive for the controller to do a transfer with? */ wd = wdc->sc_drives.tqh_first; if (wd == NULL) return; /* Is there a transfer to this drive? If not, deactivate drive. */ bp = wd->sc_q.b_actf; if (bp == NULL) { TAILQ_REMOVE(&wdc->sc_drives, wd, sc_drivechain); wd->sc_q.b_active = 0; goto loop; } if (wdc->sc_errors >= WDIORETRIES) { wderror(wd, bp, "hard error"); bp->b_error = EIO; bp->b_flags |= B_ERROR; wdfinish(wd, bp); goto loop; } /* Mark the controller active and set a timeout. */ wdc->sc_flags |= WDCF_ACTIVE; wdc->sc_timeout = 4; /* Do control operations specially. */ if (wd->sc_state < OPEN) { /* * Actually, we want to be careful not to mess with the control * state if the device is currently busy, but we can assume * that we never get to this point if that's the case. */ (void) wdcontrol(wd); return; } /* * WDCF_ERROR is set by wdcunwedge() and wdcintr() when an error is * encountered. If we are in multi-sector mode, then we switch to * single-sector mode and retry the operation from the start. */ if (wdc->sc_flags & WDCF_ERROR) { wdc->sc_flags &= ~WDCF_ERROR; if ((wdc->sc_flags & WDCF_SINGLE) == 0) { wdc->sc_flags |= WDCF_SINGLE; wd->sc_skip = wd->sc_mskip = 0; } } if (wd->sc_skip == 0) { #ifdef WDDEBUG printf("\n%s: wdcstart %s %d@%d; map ", wd->sc_dev.dv_xname, (bp->b_flags & B_READ) ? "read" : "write", bp->b_bcount, bp->b_blkno); #endif wd->sc_bcount = bp->b_bcount; #ifdef INSTRUMENT dk_busy |= (1 << wd->sc_dev.dv_unit); dk_wds[wd->sc_dev.dv_unit] += bp->b_bcount >> 6; #endif } else { #ifdef WDDEBUG printf(" %d)%x", wd->sc_skip, inb(wd->sc_iobase+wd_altsts)); #endif } if (wd->sc_mskip == 0) { wd->sc_mbcount = wd->sc_bcount; /* If multi-sector, try to cluster. */ if ((wdc->sc_flags & WDCF_SINGLE) == 0) { struct buf *oldbp, *nextbp; oldbp = bp; nextbp = bp->b_actf; oldbp->b_flags |= B_XXX; while (nextbp && oldbp->b_dev == nextbp->b_dev && nextbp->b_blkno == (oldbp->b_blkno + (oldbp->b_bcount / wd->sc_dk.dk_label.d_secsize)) && (oldbp->b_flags & B_READ) == (nextbp->b_flags & B_READ)) { if ((wd->sc_mbcount + nextbp->b_bcount) / wd->sc_dk.dk_label.d_secsize >= 240) break; wd->sc_mbcount += nextbp->b_bcount; nextbp->b_flags |= B_XXX; oldbp = nextbp; nextbp = nextbp->b_actf; } } } /* If starting a multisector transfer, or doing single transfers. */ if (wd->sc_mskip == 0 || (wdc->sc_flags & WDCF_SINGLE)) { struct disklabel *lp; long blkno, nblks; long cylin, head, sector; int command; lp = &wd->sc_dk.dk_label; blkno = bp->b_blkno / (lp->d_secsize / DEV_BSIZE) + wd->sc_skip; if (WDPART(bp->b_dev) != RAW_PART) blkno += lp->d_partitions[WDPART(bp->b_dev)].p_offset; if (wdc->sc_flags & WDCF_SINGLE) nblks = 1; else nblks = howmany(wd->sc_mbcount, lp->d_secsize); /* * Check for bad sectors if we have them, and not formatting. Only do * this in single-sector mode, or when starting a multiple-sector * transfer. */ if ((wd->sc_flags & WDF_BADSECT) #ifdef B_FORMAT && (bp->b_flags & B_FORMAT) == 0 #endif ) { long blkdiff; int i; for (i = 0; (blkdiff = wd->sc_badsect[i]) != -1; i++) { blkdiff -= blkno; if (blkdiff < 0) continue; if (blkdiff >= nblks) break; if (blkdiff == 0) { /* Replace current block of transfer. */ blkno = lp->d_secperunit - lp->d_nsectors - i - 1; if (wdc->sc_flags & WDCF_SINGLE) break; } else { /* If clustered, try unclustering. */ if (wd->sc_mbcount > wd->sc_bcount) { nblks = howmany(wd->sc_bcount, lp->d_secsize); if (blkdiff >= nblks) { /* Unclustering was enough. */ wd->sc_mbcount = wd->sc_bcount; break; } } /* Bad block inside transfer. */ } /* Force single-sector mode. */ wd->sc_mbcount = wd->sc_bcount; wdc->sc_flags |= WDCF_SINGLE; nblks = 1; } /* Tranfer is okay now. */ } cylin = blkno / lp->d_secpercyl; head = (blkno % lp->d_secpercyl) / lp->d_nsectors; sector = blkno % lp->d_nsectors; sector++; /* Sectors begin with 1, not 0. */ #ifdef INSTRUMENT ++dk_seek[wd->sc_dev.dv_unit]; ++dk_xfer[wd->sc_dev.dv_unit]; #endif #ifdef B_FORMAT if (bp->b_flags & B_FORMAT) { sector = lp->d_gap3; nblks = lp->d_nsectors; command = WDCC_FORMAT; } else #endif command = (bp->b_flags & B_READ) ? WDCC_READ : WDCC_WRITE; /* Initiate command! */ if (wdcommand(wd, cylin, head, sector, nblks, command) != 0) { wderror(wd, NULL, "wdcstart: timeout waiting for unbusy"); wdcunwedge(wdc); return; } #ifdef WDDEBUG printf("sector %d cylin %d head %d addr %x sts %x\n", sector, cylin, head, bp->b_data, inb(wd->sc_iobase+wd_altsts)); #endif } /* If this is a read operation, just go away until it's done. */ if (bp->b_flags & B_READ) return; if (wait_for_drq(wdc) < 0) { wderror(wd, NULL, "wdcstart: timeout waiting for drq"); wdcunwedge(wdc); return; } /* Then send it! */ outsw(wdc->sc_iobase+wd_data, bp->b_data + wd->sc_skip * DEV_BSIZE, DEV_BSIZE / sizeof(short)); } /* * Interrupt routine for the controller. Acknowledge the interrupt, check for * errors on the current operation, mark it done if necessary, and start the * next request. Also check for a partially done transfer, and continue with * the next chunk if so. */ int wdcintr(wdc) struct wdc_softc *wdc; { struct wd_softc *wd; struct buf *bp; if ((wdc->sc_flags & WDCF_ACTIVE) == 0) { /* Clear the pending interrupt. */ (void) inb(wdc->sc_iobase+wd_status); return 0; } wd = wdc->sc_drives.tqh_first; bp = wd->sc_q.b_actf; #ifdef WDDEBUG printf("I%d ", ctrlr); #endif if (wait_for_unbusy(wdc) < 0) { wderror(wd, NULL, "wdcintr: timeout waiting for unbusy"); wdc->sc_status |= WDCS_ERR; /* XXX */ } /* Is it not a transfer, but a control operation? */ if (wd->sc_state < OPEN) { if (wdcontrol(wd)) wdcstart(wdc); return 1; } wdc->sc_flags &= ~WDCF_ACTIVE; wdc->sc_timeout = 0; /* Have we an error? */ if (wdc->sc_status & (WDCS_ERR | WDCS_ECCCOR)) { lose: #ifdef WDDEBUG wderror(wd, NULL, "wdcintr"); #endif if ((wdc->sc_flags & WDCF_SINGLE) == 0) { wdc->sc_flags |= WDCF_ERROR; goto restart; } #ifdef B_FORMAT if (bp->b_flags & B_FORMAT) { bp->b_error = EIO; bp->b_flags |= B_ERROR; goto done; } #endif /* Error or error correction? */ if (wdc->sc_status & WDCS_ERR) { if (++wdc->sc_errors >= WDIORETRIES) { wderror(wd, bp, "hard error"); bp->b_error = EIO; bp->b_flags |= B_ERROR; /* Flag the error. */ goto done; } else goto restart; } else wderror(wd, bp, "soft ecc"); } /* If this was a read, fetch the data. */ if (bp->b_flags & B_READ) { /* Ready to receive data? */ if ((wdc->sc_status & (WDCS_READY | WDCS_SEEKCMPLT | WDCS_DRQ)) != (WDCS_READY | WDCS_SEEKCMPLT | WDCS_DRQ)) { wderror(wd, NULL, "wdcintr: read intr before drq"); wdcunwedge(wdc); return 1; } /* Suck in data. */ insw(wdc->sc_iobase+wd_data, bp->b_data + wd->sc_skip * DEV_BSIZE, DEV_BSIZE / sizeof(short)); } /* If we encountered any abnormalities, flag it as a soft error. */ if (wdc->sc_errors) { wderror(wd, bp, "soft error"); wdc->sc_errors = 0; } /* Ready for the next block, if any. */ wd->sc_skip++; wd->sc_mskip++; wd->sc_bcount -= DEV_BSIZE; wd->sc_mbcount -= DEV_BSIZE; /* See if more to transfer. */ if (wd->sc_bcount > 0) goto restart; done: /* Done with this transfer, with or without error. */ wdfinish(wd, bp); restart: /* Start the next transfer, if any. */ wdcstart(wdc); return 1; } /* * Initialize a drive. */ int wdopen(dev, flag, fmt, p) dev_t dev; int flag, fmt; struct proc *p; { int lunit; struct wd_softc *wd; int part = WDPART(dev); struct partition *pp; char *msg; int error; lunit = WDUNIT(dev); if (lunit >= wdcd.cd_ndevs) return ENXIO; wd = wdcd.cd_devs[lunit]; if (wd == 0) return ENXIO; if ((wd->sc_flags & WDF_BSDLABEL) == 0) { wd->sc_flags |= WDF_WRITEPROT; wd->sc_q.b_actf = NULL; /* * Use the default sizes until we've read the label, or longer * if there isn't one there. */ bzero(&wd->sc_dk.dk_label, sizeof(wd->sc_dk.dk_label)); wd->sc_dk.dk_label.d_type = DTYPE_ST506; wd->sc_dk.dk_label.d_ncylinders = 1024; wd->sc_dk.dk_label.d_secsize = DEV_BSIZE; wd->sc_dk.dk_label.d_ntracks = 8; wd->sc_dk.dk_label.d_nsectors = 17; wd->sc_dk.dk_label.d_secpercyl = 17*8; wd->sc_dk.dk_label.d_secperunit = 17*8*1024; wd->sc_state = RECAL; /* Read label using "raw" partition. */ msg = readdisklabel(WDLABELDEV(dev), wdstrategy, &wd->sc_dk.dk_label, &wd->sc_dk.dk_cpulabel); if (msg) { /* * This probably happened because the drive's default * geometry doesn't match the DOS geometry. We * assume the DOS geometry is now in the label and try * again. XXX This is a kluge. */ if (wd->sc_state > GEOMETRY) wd->sc_state = GEOMETRY; msg = readdisklabel(WDLABELDEV(dev), wdstrategy, &wd->sc_dk.dk_label, &wd->sc_dk.dk_cpulabel); } if (msg) { log(LOG_WARNING, "%s: cannot find label (%s)\n", wd->sc_dev.dv_xname, msg); if (part != RAW_PART) return EINVAL; /* XXX needs translation */ } else { if (wd->sc_state > GEOMETRY) wd->sc_state = GEOMETRY; wd->sc_flags |= WDF_BSDLABEL; wd->sc_flags &= ~WDF_WRITEPROT; if (wd->sc_dk.dk_label.d_flags & D_BADSECT) wd->sc_flags |= WDF_BADSECT; } } if (wd->sc_flags & WDF_BADSECT) bad144intern(wd); /* * Warn if a partition is opened that overlaps another partition which * is open unless one is the "raw" partition (whole disk). */ if ((wd->sc_dk.dk_openmask & (1 << part)) == 0 && part != RAW_PART) { int start, end; pp = &wd->sc_dk.dk_label.d_partitions[part]; start = pp->p_offset; end = pp->p_offset + pp->p_size; for (pp = wd->sc_dk.dk_label.d_partitions; pp < &wd->sc_dk.dk_label.d_partitions[wd->sc_dk.dk_label.d_npartitions]; pp++) { if (pp->p_offset + pp->p_size <= start || pp->p_offset >= end) continue; if (pp - wd->sc_dk.dk_label.d_partitions == RAW_PART) continue; if (wd->sc_dk.dk_openmask & (1 << (pp - wd->sc_dk.dk_label.d_partitions))) log(LOG_WARNING, "%s%c: overlaps open partition (%c)\n", wd->sc_dev.dv_xname, part + 'a', pp - wd->sc_dk.dk_label.d_partitions + 'a'); } } if (part != RAW_PART && (part >= wd->sc_dk.dk_label.d_npartitions || wd->sc_dk.dk_label.d_partitions[part].p_fstype == FS_UNUSED)) { error = ENXIO; goto bad; } /* Insure only one open at a time. */ switch (fmt) { case S_IFCHR: wd->sc_dk.dk_copenmask |= (1 << part); break; case S_IFBLK: wd->sc_dk.dk_bopenmask |= (1 << part); break; } wd->sc_dk.dk_openmask = wd->sc_dk.dk_copenmask | wd->sc_dk.dk_bopenmask; return 0; bad: return error; } /* * Implement operations other than read/write. * Called from wdcstart or wdcintr during opens and formats. * Uses finite-state-machine to track progress of operation in progress. * Returns 0 if operation still in progress, 1 if completed. */ static int wdcontrol(wd) struct wd_softc *wd; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; switch (wd->sc_state) { case RECAL: /* Set SDH, step rate, do restore. */ if (wdcommand(wd, 0, 0, 0, 0, WDCC_RESTORE | WD_STEP) != 0) { wderror(wd, NULL, "wdcontrol: wdcommand failed"); wdcunwedge(wdc); return 0; } wd->sc_state = RECAL_WAIT; return 0; case RECAL_WAIT: if (wdc->sc_status & WDCS_ERR) { wderror(wd, NULL, "wdcontrol: recal failed"); wdcunwedge(wdc); return 0; } /* fall through */ case GEOMETRY: if (wdsetctlr(wd) != 0) { /* Already printed a message. */ wdcunwedge(wdc); return 0; } wd->sc_state = GEOMETRY_WAIT; return 0; case GEOMETRY_WAIT: if (wdc->sc_status & WDCS_ERR) { wderror(wd, NULL, "wdcontrol: geometry failed"); wdcunwedge(wdc); return 0; } wdc->sc_errors = 0; wd->sc_state = OPEN; /* * The rest of the initialization can be done by normal means. */ return 1; } #ifdef DIAGNOSTIC panic("wdcontrol: impossible"); #endif } /* * Send a command and wait uninterruptibly until controller is finished. * Return -1 if controller busy for too long, otherwise return non-zero if * error. Intended for brief controller commands at critical points. * Assumes interrupts are blocked. */ static int wdcommand(wd, cylin, head, sector, count, cmd) struct wd_softc *wd; int cylin, head, sector, count; int cmd; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; int stat; u_short iobase; /* Select drive. */ iobase = wdc->sc_iobase; outb(iobase+wd_sdh, WDSD_IBM | (wd->sc_drive << 4) | head); /* Wait for it to become ready to accept a command. */ if (cmd == WDCC_DIAGNOSE || cmd == WDCC_IDC) stat = wait_for_unbusy(wdc); else stat = wdcwait(wdc, WDCS_READY); if (stat < 0) return -1; /* Load parameters. */ outb(iobase+wd_precomp, wd->sc_dk.dk_label.d_precompcyl / 4); outb(iobase+wd_cyl_lo, cylin); outb(iobase+wd_cyl_hi, cylin >> 8); outb(iobase+wd_sector, sector); outb(iobase+wd_seccnt, count); /* Send command, await results. */ outb(iobase+wd_command, cmd); return 0; } /* * Issue IDC to drive to tell it just what geometry it is to be. */ static int wdsetctlr(wd) struct wd_softc *wd; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; #ifdef WDDEBUG printf("wd(%d,%d) C%dH%dS%d\n", wd->sc_ctrlr, wd->sc_drive, wd->sc_dk.dk_label.d_ncylinders, wd->sc_dk.dk_label.d_ntracks, wd->sc_dk.dk_label.d_nsectors); #endif if (wdcommand(wd, wd->sc_dk.dk_label.d_ncylinders, wd->sc_dk.dk_label.d_ntracks - 1, 0, wd->sc_dk.dk_label.d_nsectors, WDCC_IDC) != 0) { wderror(wd, NULL, "wdsetctlr: wdcommand failed"); return -1; } return 0; } /* * Issue READP to drive to ask it what it is. */ static int wdgetctlr(wd) struct wd_softc *wd; { struct wdc_softc *wdc = (void *)wd->sc_dev.dv_parent; int i; char tb[DEV_BSIZE]; struct wdparams *wp; if (wdcommand(wd, 0, 0, 0, 0, WDCC_READP) != 0 || wait_for_drq(wdc) != 0) { /* * If WDCC_READP fails then we might have an old drive so we * try a seek to 0; if that passes then the drive is there but * it's OLD AND KRUSTY. */ if (wdcommand(wd, 0, 0, 0, 0, WDCC_RESTORE | WD_STEP) != 0 || wait_for_ready(wdc) != 0) return -1; strncpy(wd->sc_dk.dk_label.d_typename, "ST506", sizeof wd->sc_dk.dk_label.d_typename); strncpy(wd->sc_params.wdp_model, "Unknown Type", sizeof wd->sc_params.wdp_model); wd->sc_dk.dk_label.d_type = DTYPE_ST506; } else { /* Obtain parameters. */ wp = &wd->sc_params; insw(wdc->sc_iobase+wd_data, tb, sizeof(tb) / sizeof(short)); bcopy(tb, wp, sizeof(struct wdparams)); /* Shuffle string byte order. */ for (i = 0; i < sizeof(wp->wdp_model); i += 2) { u_short *p; p = (u_short *)(wp->wdp_model + i); *p = ntohs(*p); } strncpy(wd->sc_dk.dk_label.d_typename, "ESDI/IDE", sizeof wd->sc_dk.dk_label.d_typename); wd->sc_dk.dk_label.d_type = DTYPE_ESDI; bcopy(wp->wdp_model+20, wd->sc_dk.dk_label.d_packname, 14-1); /* Update disklabel given drive information. */ wd->sc_dk.dk_label.d_ncylinders = wp->wdp_fixedcyl + wp->wdp_removcyl /*+- 1*/; wd->sc_dk.dk_label.d_ntracks = wp->wdp_heads; wd->sc_dk.dk_label.d_nsectors = wp->wdp_sectors; wd->sc_dk.dk_label.d_secpercyl = wd->sc_dk.dk_label.d_ntracks * wd->sc_dk.dk_label.d_nsectors; wd->sc_dk.dk_label.d_partitions[1].p_size = wd->sc_dk.dk_label.d_secpercyl * wp->wdp_sectors; wd->sc_dk.dk_label.d_partitions[1].p_offset = 0; } #if 0 printf("gc %x cyl %d trk %d sec %d type %d sz %d model %s\n", wp->wdp_config, wp->wdp_fixedcyl + wp->wdp_removcyl, wp->wdp_heads, wp->wdp_sectors, wp->wdp_cntype, wp->wdp_cnsbsz, wp->wdp_model); #endif wd->sc_dk.dk_label.d_subtype |= DSTYPE_GEOMETRY; /* XXX sometimes possibly needed */ (void) inb(wdc->sc_iobase+wd_status); return 0; } int wdclose(dev, flag, fmt) dev_t dev; int flag, fmt; { struct wd_softc *wd = wdcd.cd_devs[WDUNIT(dev)]; int part = WDPART(dev); switch (fmt) { case S_IFCHR: wd->sc_dk.dk_copenmask &= ~(1 << part); break; case S_IFBLK: wd->sc_dk.dk_bopenmask &= ~(1 << part); break; } wd->sc_dk.dk_openmask = wd->sc_dk.dk_copenmask | wd->sc_dk.dk_bopenmask; return 0; } int wdioctl(dev, cmd, addr, flag, p) dev_t dev; int cmd; caddr_t addr; int flag; struct proc *p; { int lunit = WDUNIT(dev); struct wd_softc *wd = wdcd.cd_devs[lunit]; int error; switch (cmd) { case DIOCSBAD: if ((flag & FWRITE) == 0) return EBADF; wd->sc_dk.dk_cpulabel.bad = *(struct dkbad *)addr; wd->sc_flags |= WDF_BADSECT; bad144intern(wd); return 0; case DIOCGDINFO: *(struct disklabel *)addr = wd->sc_dk.dk_label; return 0; case DIOCGPART: ((struct partinfo *)addr)->disklab = &wd->sc_dk.dk_label; ((struct partinfo *)addr)->part = &wd->sc_dk.dk_label.d_partitions[WDPART(dev)]; return 0; case DIOCSDINFO: if ((flag & FWRITE) == 0) return EBADF; error = setdisklabel(&wd->sc_dk.dk_label, (struct disklabel *)addr, /*(wd->sc_flags & WDF_BSDLABEL) ? wd->sc_dk.dk_openmask : */0, &wd->sc_dk.dk_cpulabel); if (error == 0) { wd->sc_flags |= WDF_BSDLABEL; if (wd->sc_state > GEOMETRY) wd->sc_state = GEOMETRY; } return error; case DIOCWLABEL: wd->sc_flags &= ~WDF_WRITEPROT; if ((flag & FWRITE) == 0) return EBADF; if (*(int *)addr) wd->sc_flags |= WDF_WLABEL; else wd->sc_flags &= ~WDF_WLABEL; return 0; case DIOCWDINFO: wd->sc_flags &= ~WDF_WRITEPROT; if ((flag & FWRITE) == 0) return EBADF; error = setdisklabel(&wd->sc_dk.dk_label, (struct disklabel *)addr, /*(wd->sc_flags & WDF_BSDLABEL) ? wd->sc_dk.dk_openmask : */0, &wd->sc_dk.dk_cpulabel); if (error == 0) { wd->sc_flags |= WDF_BSDLABEL; if (wd->sc_state > GEOMETRY) wd->sc_state = GEOMETRY; /* Simulate opening partition 0 so write succeeds. */ wd->sc_dk.dk_openmask |= (1 << 0); /* XXX */ error = writedisklabel(WDLABELDEV(dev), wdstrategy, &wd->sc_dk.dk_label, &wd->sc_dk.dk_cpulabel); wd->sc_dk.dk_openmask = wd->sc_dk.dk_copenmask | wd->sc_dk.dk_bopenmask; } return error; #ifdef notyet case DIOCGDINFOP: *(struct disklabel **)addr = &wd->sc_dk.dk_label; return 0; case DIOCWFORMAT: if ((flag & FWRITE) == 0) return EBADF; { register struct format_op *fop; struct iovec aiov; struct uio auio; fop = (struct format_op *)addr; aiov.iov_base = fop->df_buf; aiov.iov_len = fop->df_count; auio.uio_iov = &aiov; auio.uio_iovcnt = 1; auio.uio_resid = fop->df_count; auio.uio_segflg = 0; auio.uio_offset = fop->df_startblk * wd->sc_dk.dk_label.d_secsize; auio.uio_procp = p; error = physio(wdformat, NULL, dev, B_WRITE, minphys, &auio); fop->df_count -= auio.uio_resid; fop->df_reg[0] = wdc->sc_status; fop->df_reg[1] = wdc->sc_error; return error; } #endif default: return ENOTTY; } #ifdef DIAGNOSTIC panic("wdioctl: impossible"); #endif } #ifdef B_FORMAT int wdformat(struct buf *bp) { bp->b_flags |= B_FORMAT; return wdstrategy(bp); } #endif int wdsize(dev) dev_t dev; { int lunit = WDUNIT(dev), part = WDPART(dev); struct wd_softc *wd; if (lunit >= wdcd.cd_ndevs) return -1; wd = wdcd.cd_devs[lunit]; if (wd == 0) return -1; if (wd->sc_state < OPEN || (wd->sc_flags & WDF_BSDLABEL) == 0) { int val; val = wdopen(MAKEWDDEV(major(dev), lunit, RAW_PART), FREAD, S_IFBLK, 0); /* XXX Clear the open flag? */ if (val != 0) return -1; } if ((wd->sc_flags & (WDF_WRITEPROT | WDF_BSDLABEL)) != WDF_BSDLABEL) return -1; return (int)wd->sc_dk.dk_label.d_partitions[part].p_size; } /* * Dump core after a system crash. */ int wddump(dev) dev_t dev; { struct wd_softc *wd; /* disk unit to do the IO */ struct wdc_softc *wdc; long num; /* number of sectors to write */ int lunit, part; long blkoff, blkno; long cylin, head, sector; long secpertrk, secpercyl, nblocks; char *addr; static wddoingadump = 0; extern caddr_t CADDR1; extern pt_entry_t *CMAP1; addr = (char *)0; /* starting address */ #if DO_NOT_KNOW_HOW /* Toss any characters present prior to dump, ie. non-blocking getc. */ while (cngetc()) ; #endif lunit = WDUNIT(dev); /* Check for acceptable drive number. */ if (lunit >= wdcd.cd_ndevs) return ENXIO; wd = wdcd.cd_devs[lunit]; /* Was it ever initialized? */ if (wd == 0 || wd->sc_state < OPEN || wd->sc_flags & WDF_WRITEPROT) return ENXIO; wdc = (void *)wd->sc_dev.dv_parent; /* Convert to disk sectors. */ num = ctob(physmem) / wd->sc_dk.dk_label.d_secsize; secpertrk = wd->sc_dk.dk_label.d_nsectors; secpercyl = wd->sc_dk.dk_label.d_secpercyl; part = WDPART(dev); nblocks = wd->sc_dk.dk_label.d_partitions[part].p_size; blkoff = wd->sc_dk.dk_label.d_partitions[part].p_offset; /*printf("part %x, nblocks %d, dumplo %d, num %d\n", part, nblocks, dumplo, num);*/ /* Check transfer bounds against partition size. */ if (dumplo < 0 || dumplo + num > nblocks) return EINVAL; if (wddoingadump) return EFAULT; wddoingadump = 1; /* Recalibrate. */ if (wdcommand(wd, 0, 0, 0, 0, WDCC_RESTORE | WD_STEP) != 0 || wait_for_ready(wdc) != 0 || wdsetctlr(wd) != 0 || wait_for_ready(wdc) != 0) { wderror(wd, NULL, "wddump: recal failed"); return EIO; } blkno = dumplo + blkoff; while (num > 0) { /* Compute disk address. */ cylin = blkno / secpercyl; head = (blkno % secpercyl) / secpertrk; sector = blkno % secpertrk; if (wd->sc_flags & WDF_BADSECT) { long newblk; int i; for (i = 0; wd->sc_badsect[i] != -1; i++) { if (blkno < wd->sc_badsect[i]) { /* Sorted list, passed our block by. */ break; } else if (blkno == wd->sc_badsect[i]) { newblk = wd->sc_dk.dk_label.d_secperunit - wd->sc_dk.dk_label.d_nsectors - i - 1; cylin = newblk / secpercyl; head = (newblk % secpercyl) / secpertrk; sector = newblk % secpertrk; /* Found and replaced; done. */ break; } } } sector++; /* origin 1 */ #ifdef notdef /* Let's just talk about this first. */ printf("cylin %d, head %d, sector %d, addr 0x%x", cylin, head, sector, addr); #endif if (wdcommand(wd, cylin, head, sector, 1, WDCC_WRITE) != 0) { wderror(wd, NULL, "wddump: wdcommand failed"); return EIO; } if (wait_for_drq(wdc) != 0) { wderror(wd, NULL, "wddump: timeout waiting for drq"); return EIO; } #ifdef notdef /* Cannot use this since this address was mapped differently. */ pmap_enter(kernel_pmap, CADDR1, trunc_page(addr), VM_PROT_READ, TRUE); #else *CMAP1 = PG_V | PG_KW | ctob((long)addr); tlbflush(); #endif outsw(wdc->sc_iobase+wd_data, CADDR1 + ((int)addr & PGOFSET), DEV_BSIZE / sizeof(short)); /* Check data request (should be done). */ if (wait_for_ready(wdc) != 0) { wderror(wd, NULL, "wddump: timeout waiting for ready"); return EIO; } if (wdc->sc_status & WDCS_DRQ) { wderror(wd, NULL, "wddump: extra drq"); return EIO; } if ((unsigned)addr % 1048576 == 0) printf("%d ", num / (1048576 / DEV_BSIZE)); /* Update block count. */ num--; blkno++; (int)addr += DEV_BSIZE; #if DO_NOT_KNOW_HOW /* Operator aborting dump? non-blocking getc() */ if (cngetc()) return EINTR; #endif } return 0; } /* * Internalize the bad sector table. */ void bad144intern(wd) struct wd_softc *wd; { int i; for (i = 0; i < 127; i++) wd->sc_badsect[i] = -1; for (i = 0; i < 126; i++) { if (wd->sc_dk.dk_cpulabel.bad.bt_bad[i].bt_cyl == 0xffff) break; wd->sc_badsect[i] = wd->sc_dk.dk_cpulabel.bad.bt_bad[i].bt_cyl * wd->sc_dk.dk_label.d_secpercyl + (wd->sc_dk.dk_cpulabel.bad.bt_bad[i].bt_trksec >> 8) * wd->sc_dk.dk_label.d_nsectors + (wd->sc_dk.dk_cpulabel.bad.bt_bad[i].bt_trksec & 0x00ff); } } static int wdcreset(wdc) struct wdc_softc *wdc; { u_short iobase = wdc->sc_iobase; /* Reset the device. */ outb(iobase+wd_ctlr, WDCTL_RST | WDCTL_IDS); delay(1000); outb(iobase+wd_ctlr, WDCTL_IDS); delay(1000); (void) inb(iobase+wd_error); outb(iobase+wd_ctlr, WDCTL_4BIT); if (wait_for_unbusy(wdc) < 0) { printf("%s: reset failed\n", wdc->sc_dev.dv_xname); return 1; } return 0; } static void wdcrestart(arg) void *arg; { struct wdc_softc *wdc = (struct wdc_softc *)arg; int s = splbio(); wdcstart(wdc); splx(s); } /* * Unwedge the controller after an unexpected error. We do this by resetting * it, marking all drives for recalibration, and stalling the queue for a short * period to give the reset time to finish. * NOTE: We use a timeout here, so this routine must not be called during * autoconfig or dump. */ static void wdcunwedge(wdc) struct wdc_softc *wdc; { int lunit; wdc->sc_timeout = 0; (void) wdcreset(wdc); /* Schedule recalibrate for all drives on this controller. */ for (lunit = 0; lunit < wdcd.cd_ndevs; lunit++) { struct wd_softc *wd = wdcd.cd_devs[lunit]; if (!wd || (void *)wd->sc_dev.dv_parent != wdc) continue; if (wd->sc_state > RECAL) wd->sc_state = RECAL; } wdc->sc_flags |= WDCF_ERROR; ++wdc->sc_errors; /* Wake up in a little bit and restart the operation. */ timeout(wdcrestart, wdc, RECOVERYTIME); } int wdcwait(wdc, mask) struct wdc_softc *wdc; int mask; { u_short iobase = wdc->sc_iobase; int timeout = 0; u_char status; extern int cold; for (;;) { wdc->sc_status = status = inb(iobase+wd_status); if ((status & WDCS_BUSY) == 0 && (status & mask) == mask) break; if (++timeout > WDCNDELAY) return -1; delay(WDCDELAY); } if (status & WDCS_ERR) { wdc->sc_error = inb(iobase+wd_error); return WDCS_ERR; } #ifdef WDCNDELAY_DEBUG /* After autoconfig, there should be no long delays. */ if (!cold && timeout > WDCNDELAY_DEBUG) printf("%s: warning: busy-wait took %dus\n", wdc->sc_dev.dv_xname, WDCDELAY * timeout); #endif return 0; } static void wdctimeout(arg) void *arg; { struct wdc_softc *wdc = (struct wdc_softc *)arg; int s = splbio(); if (wdc->sc_timeout && --wdc->sc_timeout == 0) { wderror(wdc, NULL, "lost interrupt"); wdcunwedge(wdc); } timeout(wdctimeout, wdc, hz); splx(s); } static void wderror(dev, bp, msg) void *dev; struct buf *bp; char *msg; { struct wd_softc *wd = dev; struct wdc_softc *wdc = dev; if (bp) diskerr(bp, "wd", msg, LOG_PRINTF, wd->sc_skip, &wd->sc_dk.dk_label); else printf("%s: %s: status %b error %b\n", wdc->sc_dev.dv_xname, msg, wdc->sc_status, WDCS_BITS, wdc->sc_error, WDERR_BITS); }