/* $NetBSD: bpf-ipf.h,v 1.1.1.2 2008/05/20 06:43:46 darrenr Exp $ */ /*- * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 * The Regents of the University of California. All rights reserved. * * This code is derived from the Stanford/CMU enet packet filter, * (net/enet.c) distributed as part of 4.3BSD, and code contributed * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence * Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)bpf.h 7.1 (Berkeley) 5/7/91 * * @(#) Header: /devel/CVS/IP-Filter/bpf-ipf.h,v 2.1.4.1 2007/10/26 12:15:08 darrenr Exp (LBL) */ #ifndef BPF_MAJOR_VERSION #ifdef __cplusplus extern "C" { #endif /* BSD style release date */ #define BPF_RELEASE 199606 typedef int bpf_int32; typedef u_int bpf_u_int32; /* * Alignment macros. BPF_WORDALIGN rounds up to the next * even multiple of BPF_ALIGNMENT. */ #ifndef __NetBSD__ #define BPF_ALIGNMENT sizeof(bpf_int32) #else #define BPF_ALIGNMENT sizeof(long) #endif #define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1)) #define BPF_MAXINSNS 512 #define BPF_MAXBUFSIZE 0x8000 #define BPF_MINBUFSIZE 32 /* * Structure for BIOCSETF. */ struct bpf_program { u_int bf_len; struct bpf_insn *bf_insns; }; /* * Struct returned by BIOCGSTATS. */ struct bpf_stat { u_int bs_recv; /* number of packets received */ u_int bs_drop; /* number of packets dropped */ }; /* * Struct return by BIOCVERSION. This represents the version number of * the filter language described by the instruction encodings below. * bpf understands a program iff kernel_major == filter_major && * kernel_minor >= filter_minor, that is, if the value returned by the * running kernel has the same major number and a minor number equal * equal to or less than the filter being downloaded. Otherwise, the * results are undefined, meaning an error may be returned or packets * may be accepted haphazardly. * It has nothing to do with the source code version. */ struct bpf_version { u_short bv_major; u_short bv_minor; }; /* Current version number of filter architecture. */ #define BPF_MAJOR_VERSION 1 #define BPF_MINOR_VERSION 1 /* * BPF ioctls * * The first set is for compatibility with Sun's pcc style * header files. If your using gcc, we assume that you * have run fixincludes so the latter set should work. */ #if (defined(sun) || defined(ibm032)) && !defined(__GNUC__) #define BIOCGBLEN _IOR(B,102, u_int) #define BIOCSBLEN _IOWR(B,102, u_int) #define BIOCSETF _IOW(B,103, struct bpf_program) #define BIOCFLUSH _IO(B,104) #define BIOCPROMISC _IO(B,105) #define BIOCGDLT _IOR(B,106, u_int) #define BIOCGETIF _IOR(B,107, struct ifreq) #define BIOCSETIF _IOW(B,108, struct ifreq) #define BIOCSRTIMEOUT _IOW(B,109, struct timeval) #define BIOCGRTIMEOUT _IOR(B,110, struct timeval) #define BIOCGSTATS _IOR(B,111, struct bpf_stat) #define BIOCIMMEDIATE _IOW(B,112, u_int) #define BIOCVERSION _IOR(B,113, struct bpf_version) #define BIOCSTCPF _IOW(B,114, struct bpf_program) #define BIOCSUDPF _IOW(B,115, struct bpf_program) #else #define BIOCGBLEN _IOR('B',102, u_int) #define BIOCSBLEN _IOWR('B',102, u_int) #define BIOCSETF _IOW('B',103, struct bpf_program) #define BIOCFLUSH _IO('B',104) #define BIOCPROMISC _IO('B',105) #define BIOCGDLT _IOR('B',106, u_int) #define BIOCGETIF _IOR('B',107, struct ifreq) #define BIOCSETIF _IOW('B',108, struct ifreq) #define BIOCSRTIMEOUT _IOW('B',109, struct timeval) #define BIOCGRTIMEOUT _IOR('B',110, struct timeval) #define BIOCGSTATS _IOR('B',111, struct bpf_stat) #define BIOCIMMEDIATE _IOW('B',112, u_int) #define BIOCVERSION _IOR('B',113, struct bpf_version) #define BIOCSTCPF _IOW('B',114, struct bpf_program) #define BIOCSUDPF _IOW('B',115, struct bpf_program) #endif /* * Structure prepended to each packet. */ struct bpf_hdr { struct timeval bh_tstamp; /* time stamp */ bpf_u_int32 bh_caplen; /* length of captured portion */ bpf_u_int32 bh_datalen; /* original length of packet */ u_short bh_hdrlen; /* length of bpf header (this struct plus alignment padding) */ }; /* * Because the structure above is not a multiple of 4 bytes, some compilers * will insist on inserting padding; hence, sizeof(struct bpf_hdr) won't work. * Only the kernel needs to know about it; applications use bh_hdrlen. */ #if defined(KERNEL) || defined(_KERNEL) #define SIZEOF_BPF_HDR 18 #endif /* * Data-link level type codes. */ /* * These are the types that are the same on all platforms; on other * platforms, a should be supplied that defines the additional * DLT_* codes appropriately for that platform (the BSDs, for example, * should not just pick up this version of "bpf.h"; they should also define * the additional DLT_* codes used by their kernels, as well as the values * defined here - and, if the values they use for particular DLT_ types * differ from those here, they should use their values, not the ones * here). */ #define DLT_NULL 0 /* no link-layer encapsulation */ #define DLT_EN10MB 1 /* Ethernet (10Mb) */ #define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */ #define DLT_AX25 3 /* Amateur Radio AX.25 */ #define DLT_PRONET 4 /* Proteon ProNET Token Ring */ #define DLT_CHAOS 5 /* Chaos */ #define DLT_IEEE802 6 /* IEEE 802 Networks */ #define DLT_ARCNET 7 /* ARCNET */ #define DLT_SLIP 8 /* Serial Line IP */ #define DLT_PPP 9 /* Point-to-point Protocol */ #define DLT_FDDI 10 /* FDDI */ /* * These are values from the traditional libpcap "bpf.h". * Ports of this to particular platforms should replace these definitions * with the ones appropriate to that platform, if the values are * different on that platform. */ #define DLT_ATM_RFC1483 11 /* LLC/SNAP encapsulated atm */ #define DLT_RAW 12 /* raw IP */ /* * These are values from BSD/OS's "bpf.h". * These are not the same as the values from the traditional libpcap * "bpf.h"; however, these values shouldn't be generated by any * OS other than BSD/OS, so the correct values to use here are the * BSD/OS values. * * Platforms that have already assigned these values to other * DLT_ codes, however, should give these codes the values * from that platform, so that programs that use these codes will * continue to compile - even though they won't correctly read * files of these types. */ #ifdef __NetBSD__ #ifndef DLT_SLIP_BSDOS #define DLT_SLIP_BSDOS 13 /* BSD/OS Serial Line IP */ #define DLT_PPP_BSDOS 14 /* BSD/OS Point-to-point Protocol */ #endif #else #define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */ #define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */ #endif #define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */ /* * These values are defined by NetBSD; other platforms should refrain from * using them for other purposes, so that NetBSD savefiles with link * types of 50 or 51 can be read as this type on all platforms. */ #define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */ #define DLT_PPP_ETHER 51 /* PPP over Ethernet */ /* * Values between 100 and 103 are used in capture file headers as * link-layer types corresponding to DLT_ types that differ * between platforms; don't use those values for new DLT_ new types. */ /* * This value was defined by libpcap 0.5; platforms that have defined * it with a different value should define it here with that value - * a link type of 104 in a save file will be mapped to DLT_C_HDLC, * whatever value that happens to be, so programs will correctly * handle files with that link type regardless of the value of * DLT_C_HDLC. * * The name DLT_C_HDLC was used by BSD/OS; we use that name for source * compatibility with programs written for BSD/OS. * * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well, * for source compatibility with programs written for libpcap 0.5. */ #define DLT_C_HDLC 104 /* Cisco HDLC */ #define DLT_CHDLC DLT_C_HDLC #define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */ /* * Values between 106 and 107 are used in capture file headers as * link-layer types corresponding to DLT_ types that might differ * between platforms; don't use those values for new DLT_ new types. */ /* * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except * that the AF_ type in the link-layer header is in network byte order. * * OpenBSD defines it as 12, but that collides with DLT_RAW, so we * define it as 108 here. If OpenBSD picks up this file, it should * define DLT_LOOP as 12 in its version, as per the comment above - * and should not use 108 as a DLT_ value. */ #define DLT_LOOP 108 /* * Values between 109 and 112 are used in capture file headers as * link-layer types corresponding to DLT_ types that might differ * between platforms; don't use those values for new DLT_ types * other than the corresponding DLT_ types. */ /* * This is for Linux cooked sockets. */ #define DLT_LINUX_SLL 113 /* * Apple LocalTalk hardware. */ #define DLT_LTALK 114 /* * Acorn Econet. */ #define DLT_ECONET 115 /* * Reserved for use with OpenBSD ipfilter. */ #define DLT_IPFILTER 116 /* * Reserved for use in capture-file headers as a link-layer type * corresponding to OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, * but that's DLT_LANE8023 in SuSE 6.3, so we can't use 17 for it * in capture-file headers. */ #define DLT_PFLOG 117 /* * Registered for Cisco-internal use. */ #define DLT_CISCO_IOS 118 /* * Reserved for 802.11 cards using the Prism II chips, with a link-layer * header including Prism monitor mode information plus an 802.11 * header. */ #define DLT_PRISM_HEADER 119 /* * Reserved for Aironet 802.11 cards, with an Aironet link-layer header * (see Doug Ambrisko's FreeBSD patches). */ #define DLT_AIRONET_HEADER 120 /* * Reserved for Siemens HiPath HDLC. */ #define DLT_HHDLC 121 /* * Reserved for RFC 2625 IP-over-Fibre Channel, as per a request from * Don Lee . * * This is not for use with raw Fibre Channel, where the link-layer * header starts with a Fibre Channel frame header; it's for IP-over-FC, * where the link-layer header starts with an RFC 2625 Network_Header * field. */ #define DLT_IP_OVER_FC 122 /* * The instruction encodings. */ /* instruction classes */ #define BPF_CLASS(code) ((code) & 0x07) #define BPF_LD 0x00 #define BPF_LDX 0x01 #define BPF_ST 0x02 #define BPF_STX 0x03 #define BPF_ALU 0x04 #define BPF_JMP 0x05 #define BPF_RET 0x06 #define BPF_MISC 0x07 /* ld/ldx fields */ #define BPF_SIZE(code) ((code) & 0x18) #define BPF_W 0x00 #define BPF_H 0x08 #define BPF_B 0x10 #define BPF_MODE(code) ((code) & 0xe0) #define BPF_IMM 0x00 #define BPF_ABS 0x20 #define BPF_IND 0x40 #define BPF_MEM 0x60 #define BPF_LEN 0x80 #define BPF_MSH 0xa0 /* alu/jmp fields */ #define BPF_OP(code) ((code) & 0xf0) #define BPF_ADD 0x00 #define BPF_SUB 0x10 #define BPF_MUL 0x20 #define BPF_DIV 0x30 #define BPF_OR 0x40 #define BPF_AND 0x50 #define BPF_LSH 0x60 #define BPF_RSH 0x70 #define BPF_NEG 0x80 #define BPF_JA 0x00 #define BPF_JEQ 0x10 #define BPF_JGT 0x20 #define BPF_JGE 0x30 #define BPF_JSET 0x40 #define BPF_SRC(code) ((code) & 0x08) #define BPF_K 0x00 #define BPF_X 0x08 /* ret - BPF_K and BPF_X also apply */ #define BPF_RVAL(code) ((code) & 0x18) #define BPF_A 0x10 /* misc */ #define BPF_MISCOP(code) ((code) & 0xf8) #define BPF_TAX 0x00 #define BPF_TXA 0x80 /* * The instruction data structure. */ struct bpf_insn { u_short code; u_char jt; u_char jf; bpf_int32 k; }; /* * Macros for insn array initializers. */ #define BPF_STMT(code, k) { (u_short)(code), 0, 0, k } #define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k } #if defined(BSD) && (defined(KERNEL) || defined(_KERNEL)) /* * Systems based on non-BSD kernels don't have ifnet's (or they don't mean * anything if it is in ) and won't work like this. */ # if __STDC__ extern void bpf_tap(struct ifnet *, u_char *, u_int); extern void bpf_mtap(struct ifnet *, struct mbuf *); extern void bpfattach(struct ifnet *, u_int, u_int); extern void bpfilterattach(int); # else extern void bpf_tap(); extern void bpf_mtap(); extern void bpfattach(); extern void bpfilterattach(); # endif /* __STDC__ */ #endif /* BSD && (_KERNEL || KERNEL) */ #if __STDC__ || defined(__cplusplus) extern int bpf_validate(struct bpf_insn *, int); extern u_int bpf_filter(struct bpf_insn *, u_char *, u_int, u_int); #else extern int bpf_validate(); extern u_int bpf_filter(); #endif /* * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST). */ #define BPF_MEMWORDS 16 #ifdef __cplusplus } #endif #endif