# $NetBSD: MDINSTALL,v 1.18 2004/11/21 19:26:33 is Exp $ # # INSTALL kernel for ramdisk installation # include "arch/amiga/conf/std.amiga" #options INCLUDE_CONFIG_FILE # embed config file in kernel binary maxusers 8 options RTC_OFFSET=0 # # mainboards to support (in addition to Amiga) # options DRACO options BB060STUPIDROM # You need this, if you have a non-DraCo # MC68060 with an OS ROM up to (at least) # V40 (OS3.1) and want to boot with the # bootblock. # You do not need this if you have a DraCo, # have no 68060 or NEVER use the bootblock # # processors this kernel should support # options M68060 # support for 060 options M060SP # MC68060 software support (Required for 060) options M68040 # support for 040 options FPSP # MC68040 floating point support options M68030 # support for 030 options M68020 # support for 020/851 options FPU_EMULATE # FPU emulation # # Networking options # options INET # IP networking support (Required) options PPP_BSDCOMP # BSD-Compress compression support for PPP options PPP_DEFLATE # Deflate compression support for PPP options PPP_FILTER # Active filter support for PPP (requires bpf) # Filesystems file-system FFS # Berkeley fast file system file-system MFS # Memory based filesystem file-system NFS # Network File System client side code file-system ADOSFS # AmigaDOS file system file-system CD9660 # ISO 9660 + Rock Ridge filesystem file-system MSDOSFS # MS-DOS filesystem file-system KERNFS # kernel data-structure filesystem options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem # # Support for various kernel options # options KTRACE # system call tracing support #options INSECURE # disable kernel security levels options SCSIVERBOSE # human readable SCSI error messages options NTP # NTP phase/frequency locked loop options USERCONF # userconf(4) support options PIPE_SOCKETPAIR # smaller, but slower pipe(2) #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel options MALLOC_NOINLINE # Not inlining MALLOC saves memory # # Misc. debugging options # options DDB # Kernel debugger #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB options DIAGNOSTIC # Extra kernel sanity checks #options DEBUG # Enable misc. kernel debugging code #options SYSCALL_DEBUG # debug all syscalls. #options SCSIDEBUG # Add SCSI debugging statements #options PANICBUTTON # Forced crash via keypress (?) # # Amiga specific options # #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the # first bank of RAM. (default: unlimited) #options NKPTADD=4 # set this for 4 additional KPT pages #options NKPTADDSHIFT=24 # set this for 1 additional KPT page # per 16 MB (1<<24 bytes) of RAM # define and decrease this, or define and # increase NKPTADD if you get "out of PT pages" # panics. # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete # before the 10 secondinterval ends, or that KBDRESET does work at all. #options KBDRESET # sync on Ctrl-Amiga-Amiga # These options improve performance with the built-in serial port # on slower Amigas. Try the larger buffers first then lev6_defer. #options SERIBUF_SIZE=4096 #options SEROBUF_SIZE=32 #options LEV6_DEFER # defers l6 to l4 (below serial l5) options RETINACONSOLE # enable code to allow retina to be console options ULOWELLCONSOLE # enable code to allow a2410 to be console options CL5426CONSOLE # Cirrus console options CV64CONSOLE # CyberVision console options TSENGCONSOLE # Tseng console options CV3DCONSOLE # CyberVision 64/3D console options GRF_ECS # Enhanced Chip Set options GRF_NTSC # NTSC options GRF_PAL # PAL options GRF_A2024 # Support for the A2024 options GRF_AGA # AGA Chip Set options GRF_AGA_VGA # AGA VGAONLY timing options GRF_SUPER72 # AGA Super-72 #options KFONT_8X11 # 8x11 font # select a font for the console according to the character set and keymap # you want to use options KFONT_CONS_ISO8859_1 #options KFONT_CONS_ISO8859_2 # This is how you would tell the kernel the A2410 oscillator frequencies: # The used frequencies are the defaults, and do not need option setting #options ULOWELL_OSC1=36000000 #options ULOWELL_OSC2=66667000 # This is how you specify the blitting speed, higher values may speed up blits # a littel bit. If you raise this value too much some trash may appear. # the commented version is the default. #options RH_MEMCLK=61000000 # this option enables the 64 bit sprite which does not work # for quite a few people. E.g. The cursor sprite will turn to a block # when moved to the top of the screen in X. #options RH_64BIT_SPRITE # enables fast scroll code appears to now work on 040 systems. #options RETINA_SPEED_HACK # enables the Hardwarecursor which does not work on some systems. #options RH_HARDWARECURSOR grfcc0 at mainbus0 # custom chips grfrt0 at zbus0 # retina II grfrh0 at zbus0 # retina III grfcl* at zbus0 # Picasso II/Piccalo/Spectrum grful0 at zbus0 # A2410 grfcv0 at zbus0 # CyberVision 64 grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) grfcv3d0 at zbus0 # CyberVision 64/3D grf0 at grfcc0 grf1 at grfrt0 grf2 at grfrh0 grf3 at grfcl? grf4 at grful0 grf5 at grfcv0 grf6 at grfet? grf7 at grfcv3d0 ite0 at grf0 # terminal emulators for grfs ite1 at grf1 # terminal emulators for grfs ite2 at grf2 # terminal emulators for grfs ite3 at grf3 # terminal emulators for grfs ite4 at grf4 # terminal emulators for grfs ite5 at grf5 # terminal emulators for grfs ite6 at grf6 # terminal emulators for grfs ite7 at grf7 # terminal emulators for grfs msc0 at zbus0 # A2232 MSC multiport serial. mfc0 at zbus0 # MultiFaceCard I/O board mfcs0 at mfc0 unit 0 # MFC serial mfcs1 at mfc0 unit 1 # MFC serial #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] #mfc1 at zbus0 # MultiFaceCard 2nd I/O board #mfcs2 at mfc1 unit 0 #mfcs3 at mfc1 unit 1 #mfcp1 at mfc1 unit 0 hyper* at zbus? # zbus HyperCom3 + HyperCom4 #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 com* at hyper? port ? # Hypercom3/4 serial ports #lpt* at hyper? port ? # not yet: Hypercom3 parallel port # # Amiga Mainboard devices (sans graphics and keyboard) # ser0 at mainbus0 # Amiga onboard serial par0 at mainbus0 # Amiga onboard parallel ms* at mainbus0 # Amiga mice fdc0 at mainbus0 # Amiga FDC fd* at fdc0 unit ? # floppy disks on the later a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock a2kbbc0 at mainbus0 # A2000 battery backed clock aucc* at mainbus0 # Amiga CC audio audio* at aucc? # # DraCo Mainboard devices (sans keyboard) # drbbc0 at mainbus0 # DraCo battery backed clock drsupio0 at mainbus0 # DraCo superio chip com* at drsupio? port ? # DraCo serial lpt0 at drsupio? port ? # DraCo parallel # # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) # # Ethernet cards: le* at zbus0 # A2065, Ameristar, Ariadne ne* at zbus0 # AriadneII ed* at zbus0 # Hydra, ASDG LanRover es* at zbus0 # CEI A4066 EthernetPLUS qn* at zbus0 # Quicknet # Arcnet bah* at zbus0 # C=/Ameristar A2060 / 560 # Greater Valley Product Bus gvpbus* at zbus0 # scsi stuff, all possible gtsc0 at gvpbus? # GVP series II scsi scsibus* at gtsc0 ahsc0 at mainbus0 # A3000 scsi scsibus* at ahsc0 atzsc0 at zbus0 # A2091 scsi scsibus* at atzsc0 wstsc0 at zbus0 # Wordsync II scsi scsibus* at wstsc0 ivsc0 at zbus0 # IVS scsi scsibus* at ivsc0 mlhsc0 at zbus0 # Hacker scsi scsibus* at mlhsc0 otgsc0 at zbus0 # 12 gauge scsi scsibus* at otgsc0 zssc0 at zbus0 # Zeus scsi scsibus* at zssc0 mgnsc0 at zbus0 # Magnum scsi scsibus* at mgnsc0 wesc0 at zbus0 # Warp Engine scsi scsibus* at wesc0 afsc0 at zbus0 # A4091 scsi scsibus* at afsc0 aftsc0 at mainbus0 # A4000T scsi scsibus* at aftsc0 flsc0 at zbus0 # FastlaneZ3 scsi scsibus* at flsc0 bzsc0 at zbus0 # Blizzard 1230 I,II scsi scsibus* at bzsc0 bzivsc0 at zbus0 # Blizzard 12x0 IV scsi scsibus* at bzivsc0 bztzsc0 at zbus0 # Blizzard 2060 scsi scsibus* at bztzsc0 cbsc0 at zbus0 # CyberSCSI I scsibus* at cbsc0 cbiisc0 at zbus0 # CyberSCSI II scsibus* at cbiisc0 cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI scsibus* at cbiiisc0 empsc0 at zbus0 # Emplant scsi scsibus* at empsc0 #idesc0 at mainbus0 # A4000 & A1200 IDE #scsibus* at idesc0 wdc0 at mainbus0 # A4000 & A1200 IDE bus atabus* at wdc? channel ? # ATA bus wd* at atabus? drive ? # + drives atapibus* at atabus? # ATAPI bus cd* at atapibus? drive ? # ATAPI CD-ROM drives sd* at atapibus? drive ? # ATAPI disk drives drsc0 at mainbus0 # DraCo scsi scsibus* at drsc0 # each hard drive from low target to high # will configure to the next available sd unit number sd* at scsibus? target ? lun ? # scsi disks st* at scsibus? target ? lun ? # scsi tapes cd* at scsibus? target ? lun ? # scsi cds pseudo-device loop # loopback network interface pseudo-device sl 1 # SLIP network interfaces pseudo-device ppp 1 # PPP network interfaces pseudo-device view 10 # views pseudo-device pty # pseudo-terminals pseudo-device vnd 4 # vnode pseudo-disks # rnd is EXPERIMENTAL at this point. #pseudo-device rnd # /dev/random and in-kernel generator #options RND_COM # use "com" randomness as well (BROKEN) config netbsd root on ? type ? # Enable the hooks used for initializing the root memory-disk. options MEMORY_DISK_HOOKS options MEMORY_DISK_IS_ROOT # force root on memory disk options MEMORY_DISK_SERVER=0 # no userspace memory disk support options MEMORY_DISK_ROOT_SIZE=2048 # size of memory disk, in blocks pseudo-device md 1 # memory disk [ramdisk]