/* $NetBSD: ultra14f.c,v 1.49 1995/04/17 12:09:27 cgd Exp $ */ /* * Copyright (c) 1994 Charles Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles Hannum. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Ported for use with the UltraStor 14f by Gary Close (gclose@wvnvms.wvnet.edu) * Slight fixes to timeouts to run with the 34F * Thanks to Julian Elischer for advice and help with this port. * * Originally written by Julian Elischer (julian@tfs.com) * for TRW Financial Systems for use under the MACH(2.5) operating system. * * TRW Financial Systems, in accordance with their agreement with Carnegie * Mellon University, makes this software available to CMU to distribute * or use in any manner that they see fit as long as this message is kept with * the software. For this reason TFS also grants any other persons or * organisations permission to use or modify this software. * * TFS supplies this software to be publicly redistributed * on the understanding that TFS is not responsible for the correct * functioning of this software in any circumstances. * * commenced: Sun Sep 27 18:14:01 PDT 1992 * slight mod to make work with 34F as well: Wed Jun 2 18:05:48 WST 1993 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB int Debugger(); #else /* DDB */ #define Debugger() panic("should call debugger here (ultra14f.c)") #endif /* DDB */ typedef u_long physaddr; typedef u_long physlen; #define KVTOPHYS(x) vtophys(x) #define UHA_MSCP_MAX 32 /* store up to 32 MSCPs at one time */ #define MSCP_HASH_SIZE 32 /* hash table size for phystokv */ #define MSCP_HASH_SHIFT 9 #define MSCP_HASH(x) ((((long)(x))>>MSCP_HASH_SHIFT) & (MSCP_HASH_SIZE - 1)) #define UHA_NSEG 33 /* number of dma segments supported */ /************************** board definitions *******************************/ /* * I/O Port Interface */ #define U14_LMASK 0x0000 /* local doorbell mask reg */ #define U14_LINT 0x0001 /* local doorbell int/stat reg */ #define U14_SMASK 0x0002 /* system doorbell mask reg */ #define U14_SINT 0x0003 /* system doorbell int/stat reg */ #define U14_ID 0x0004 /* product id reg (2 ports) */ #define U14_CONFIG 0x0006 /* config reg (2 ports) */ #define U14_OGMPTR 0x0008 /* outgoing mail ptr (4 ports) */ #define U14_ICMPTR 0x000c /* incoming mail ptr (4 ports) */ #define U24_CONFIG 0x0c85 /* config reg (3 ports) */ #define U24_LMASK 0x0c8c /* local doorbell mask reg */ #define U24_LINT 0x0c8d /* local doorbell int/stat reg */ #define U24_SMASK 0x0c8e /* system doorbell mask reg */ #define U24_SINT 0x0c8f /* system doorbell int/stat reg */ #define U24_OGMCMD 0x0c96 /* outgoing commands */ #define U24_OGMPTR 0x0c97 /* outgoing mail ptr (4 ports) */ #define U24_ICMCMD 0x0c9b /* incoming commands */ #define U24_ICMPTR 0x0c9c /* incoming mail ptr (4 ports) */ /* * UHA_LMASK bits (read only) */ #define UHA_LDIE 0x80 /* local doorbell int enabled */ #define UHA_SRSTE 0x40 /* soft reset enabled */ #define UHA_ABORTEN 0x10 /* abort MSCP enabled */ #define UHA_OGMINTEN 0x01 /* outgoing mail interrupt enabled */ /* * UHA_LINT bits (write only) */ #define U14_LDIP 0x80 /* local doorbell int pending */ #define U24_LDIP 0x02 /* local doorbell int pending */ #define U14_OGMFULL 0x01 /* outgoing mailbox is full */ #define U24_OGMFULL 0x02 /* outgoing mailbox is full */ #define UHA_ABORT 0x10 /* abort MSCP */ #define UHA_SBRST 0x40 /* scsi bus reset */ #define UHA_ADRST 0x80 /* adapter soft reset */ #define UHA_ASRST 0xc0 /* adapter and scsi reset */ /* * UHA_SMASK bits (read/write) */ #define UHA_ENSINT 0x80 /* enable system doorbell interrupt */ #define UHA_EN_ABORT_COMPLETE 0x10 /* enable abort MSCP complete int */ #define UHA_ENICM 0x01 /* enable ICM interrupt */ /* * UHA_SINT bits (read) */ #define U14_SDIP 0x80 /* system doorbell int pending */ #define U24_SDIP 0x02 /* system doorbell int pending */ #define UHA_ABORT_SUCC 0x10 /* abort MSCP successful */ #define UHA_ABORT_FAIL 0x18 /* abort MSCP failed */ /* * UHA_SINT bits (write) */ #define U14_ICM_ACK 0x01 /* acknowledge ICM and clear */ #define U24_ICM_ACK 0x02 /* acknowledge ICM and clear */ #define UHA_ABORT_ACK 0x18 /* acknowledge status and clear */ /* * U14_CONFIG bits (read only) */ #define U14_DMA_CH5 0x0000 /* DMA channel 5 */ #define U14_DMA_CH6 0x4000 /* 6 */ #define U14_DMA_CH7 0x8000 /* 7 */ #define U14_DMA_MASK 0xc000 #define U14_IRQ15 0x0000 /* IRQ 15 */ #define U14_IRQ14 0x1000 /* 14 */ #define U14_IRQ11 0x2000 /* 11 */ #define U14_IRQ10 0x3000 /* 10 */ #define U14_IRQ_MASK 0x3000 #define U14_HOSTID_MASK 0x0007 /* * U24_CONFIG bits (read only) */ #define U24_MAGIC1 0x08 #define U24_IRQ15 0x10 #define U24_IRQ14 0x20 #define U24_IRQ11 0x40 #define U24_IRQ10 0x80 #define U24_IRQ_MASK 0xf0 #define U24_MAGIC2 0x04 #define U24_HOSTID_MASK 0x07 /* * EISA registers (offset from slot base) */ #define EISA_VENDOR 0x0c80 /* vendor ID (2 ports) */ #define EISA_MODEL 0x0c82 /* model number (2 ports) */ #define EISA_CONTROL 0x0c84 #define EISA_RESET 0x04 #define EISA_ERROR 0x02 #define EISA_ENABLE 0x01 /* * host_stat error codes */ #define UHA_NO_ERR 0x00 /* No error supposedly */ #define UHA_SBUS_ABORT_ERR 0x84 /* scsi bus abort error */ #define UHA_SBUS_TIMEOUT 0x91 /* scsi bus selection timeout */ #define UHA_SBUS_OVER_UNDER 0x92 /* scsi bus over/underrun */ #define UHA_BAD_SCSI_CMD 0x96 /* illegal scsi command */ #define UHA_AUTO_SENSE_ERR 0x9b /* auto request sense err */ #define UHA_SBUS_RES_ERR 0xa3 /* scsi bus reset error */ #define UHA_BAD_SG_LIST 0xff /* invalid scatter gath list */ struct uha_dma_seg { physaddr seg_addr; physlen seg_len; }; #pragma pack(1) struct uha_mscp { u_char opcode:3; #define UHA_HAC 0x01 /* host adapter command */ #define UHA_TSP 0x02 /* target scsi pass through command */ #define UHA_SDR 0x04 /* scsi device reset */ u_char xdir:2; /* xfer direction */ #define UHA_SDET 0x00 /* determined by scsi command */ #define UHA_SDIN 0x01 /* scsi data in */ #define UHA_SDOUT 0x02 /* scsi data out */ #define UHA_NODATA 0x03 /* no data xfer */ u_char dcn:1; /* disable disconnect for this command */ u_char ca:1; /* cache control */ u_char sgth:1; /* scatter gather flag */ u_char target:3; u_char chan:2; /* scsi channel (always 0 for 14f) */ u_char lun:3; physaddr data_addr; physlen data_length; physaddr link_addr; u_char link_id; u_char sg_num; /* number of scat gath segs */ /*in s-g list if sg flag is */ /*set. starts at 1, 8bytes per */ u_char req_sense_length; u_char scsi_cmd_length; struct scsi_generic scsi_cmd; u_char host_stat; u_char target_stat; physaddr sense_ptr; /* if 0 no auto sense */ /*-----------------end of hardware supported fields----------------*/ TAILQ_ENTRY(uha_mscp) chain; struct uha_mscp *nexthash; long hashkey; struct scsi_xfer *xs; /* the scsi_xfer for this cmd */ int flags; #define MSCP_FREE 0 #define MSCP_ACTIVE 1 #define MSCP_ABORTED 2 struct uha_dma_seg uha_dma[UHA_NSEG]; struct scsi_sense_data mscp_sense; }; #pragma pack(4) struct uha_softc { struct device sc_dev; struct isadev sc_id; void *sc_ih; int sc_iobase; int sc_irq, sc_drq; void (*send_mbox)(); int (*abort)(); int (*poll)(); int (*intr)(); void (*init)(); struct uha_mscp *mscphash[MSCP_HASH_SIZE]; TAILQ_HEAD(, uha_mscp) free_mscp; int nummscps; int uha_scsi_dev; /* our scsi id */ struct scsi_link sc_link; }; void u14_start_mbox __P((struct uha_softc *, int, struct uha_mscp *)); void u14_send_mbox __P((struct uha_softc *, struct uha_mscp *)); void u24_start_mbox __P((struct uha_softc *, int, struct uha_mscp *)); void u24_send_mbox __P((struct uha_softc *, struct uha_mscp *)); int u14_abort __P((struct uha_softc *, struct uha_mscp *)); int u24_abort __P((struct uha_softc *, struct uha_mscp *)); int u14_poll __P((struct uha_softc *, struct scsi_xfer *, int)); int u24_poll __P((struct uha_softc *, struct scsi_xfer *, int)); int u14intr __P((void *)); int u24intr __P((void *)); void uha_done __P((struct uha_softc *, struct uha_mscp *)); void uha_free_mscp __P((struct uha_softc *, struct uha_mscp *, int flags)); struct uha_mscp *uha_get_mscp __P((struct uha_softc *, int)); struct uha_mscp *uha_mscp_phys_kv __P((struct uha_softc *, u_long)); int u14_find __P((struct uha_softc *, struct isa_attach_args *)); int u24_find __P((struct uha_softc *, struct isa_attach_args *)); void u14_init __P((struct uha_softc *)); void u24_init __P((struct uha_softc *)); void uhaminphys __P((struct buf *)); int uha_scsi_cmd __P((struct scsi_xfer *)); void uha_timeout __P((void *arg)); #ifdef UHADEBUG void uha_print_mscp __P((struct uha_mscp *)); void uha_print_active_mscp __P((struct uha_softc *)); #endif u_long scratch; #define UHA_SHOWMSCPS 0x01 #define UHA_SHOWINTS 0x02 #define UHA_SHOWCMDS 0x04 #define UHA_SHOWMISC 0x08 struct scsi_adapter uha_switch = { uha_scsi_cmd, uhaminphys, 0, 0, }; /* the below structure is so we have a default dev struct for out link struct */ struct scsi_device uha_dev = { NULL, /* Use default error handler */ NULL, /* have a queue, served by this */ NULL, /* have no async handler */ NULL, /* Use default 'done' routine */ }; int uhaprobe __P((struct device *, void *, void *)); void uhaattach __P((struct device *, struct device *, void *)); struct cfdriver uhacd = { NULL, "uha", uhaprobe, uhaattach, DV_DULL, sizeof(struct uha_softc) }; /* * Function to send a command out through a mailbox */ void u14_start_mbox(uha, opcode, mscp) struct uha_softc *uha; int opcode; struct uha_mscp *mscp; { int iobase = uha->sc_iobase; int spincount = 100000; /* 1s should be enough */ while (--spincount) { if ((inb(iobase + U14_LINT) & U14_LDIP) == 0) break; delay(100); } if (!spincount) { printf("%s: uha_send_mbox, board not responding\n", uha->sc_dev.dv_xname); Debugger(); } outl(iobase + U14_OGMPTR, KVTOPHYS(mscp)); outb(iobase + U14_LINT, opcode); } void u14_send_mbox(uha, mscp) struct uha_softc *uha; struct uha_mscp *mscp; { u14_start_mbox(uha, U14_OGMFULL, mscp); } void u24_start_mbox(uha, opcode, mscp) struct uha_softc *uha; int opcode; struct uha_mscp *mscp; { int iobase = uha->sc_iobase; int spincount = 100000; /* 1s should be enough */ while (--spincount) { if ((inb(iobase + U24_LINT) & U24_LDIP) == 0) break; delay(100); } if (!spincount) { printf("%s: uha_send_mbox, board not responding\n", uha->sc_dev.dv_xname); Debugger(); } outl(iobase + U24_OGMPTR, KVTOPHYS(mscp)); outb(iobase + U24_OGMCMD, 1); outb(iobase + U24_LINT, opcode); } void u24_send_mbox(uha, mscp) struct uha_softc *uha; struct uha_mscp *mscp; { u24_start_mbox(uha, U24_OGMFULL, mscp); } /* * Function to send abort */ int u14_abort(uha, mscp) struct uha_softc *uha; struct uha_mscp *mscp; { int iobase = uha->sc_iobase; int abortcount = 200000; /* 2 secs */ int s = splbio(); u14_start_mbox(uha, UHA_ABORT, mscp); while (--abortcount) { if (inb(iobase + U14_SINT) & UHA_ABORT_FAIL) break; delay(10); } if (!abortcount) { printf("%s: u14_abort, board not responding\n", uha->sc_dev.dv_xname); Debugger(); } if ((inb(iobase + U14_SINT) & (UHA_ABORT_FAIL | UHA_ABORT_SUCC)) == UHA_ABORT_SUCC) { outb(iobase + U14_SINT, UHA_ABORT_ACK); splx(s); return 1; } else { outb(iobase + U14_SINT, UHA_ABORT_ACK); splx(s); return 0; } } int u24_abort(uha, mscp) struct uha_softc *uha; struct uha_mscp *mscp; { int iobase = uha->sc_iobase; int abortcount = 200000; /* 2 secs */ int s = splbio(); u24_start_mbox(uha, UHA_ABORT, mscp); while (--abortcount) { if (inb(iobase + U24_SINT) & UHA_ABORT_FAIL) break; delay(10); } if (!abortcount) { printf("%s: u24_abort, board not responding\n", uha->sc_dev.dv_xname); Debugger(); } if ((inb(iobase + U24_SINT) & (UHA_ABORT_FAIL | UHA_ABORT_SUCC)) == UHA_ABORT_SUCC) { outb(iobase + U24_SINT, UHA_ABORT_ACK); splx(s); return 1; } else { outb(iobase + U24_SINT, UHA_ABORT_ACK); splx(s); return 0; } } /* * Function to poll for command completion when in poll mode. * * wait = timeout in msec */ int u14_poll(uha, xs, count) struct uha_softc *uha; struct scsi_xfer *xs; int count; { int iobase = uha->sc_iobase; while (count) { /* * If we had interrupts enabled, would we * have got an interrupt? */ if (inb(iobase + U14_SINT) & U14_SDIP) u14intr(uha); if (xs->flags & ITSDONE) return 0; delay(1000); count--; } return 1; } int u24_poll(uha, xs, count) struct uha_softc *uha; struct scsi_xfer *xs; int count; { int iobase = uha->sc_iobase; while (count) { /* * If we had interrupts enabled, would we * have got an interrupt? */ if (inb(iobase + U24_SINT) & U24_SDIP) u24intr(uha); if (xs->flags & ITSDONE) return 0; delay(1000); count--; } return 1; } /* * Check if the device can be found at the port given and if so, set it up * ready for further work as an argument, takes the isa_device structure * from autoconf.c */ int uhaprobe(parent, match, aux) struct device *parent; void *match, *aux; { struct uha_softc *uha = match; struct isa_attach_args *ia = aux; uha->sc_iobase = ia->ia_iobase; /* * Try initialise a unit at this location * sets up dma and bus speed, loads uha->sc_irq */ if (u24_find(uha, ia) != 0 && u14_find(uha, ia) != 0) return 0; if (ia->ia_irq != IRQUNK) { if (ia->ia_irq != uha->sc_irq) { printf("%s: irq mismatch; kernel configured %d != board configured %d\n", uha->sc_dev.dv_xname, ia->ia_irq, uha->sc_irq); return 0; } } else ia->ia_irq = uha->sc_irq; if (ia->ia_drq != DRQUNK) { if (ia->ia_drq != uha->sc_drq) { printf("%s: drq mismatch; kernel configured %d != board configured %d\n", uha->sc_dev.dv_xname, ia->ia_drq, uha->sc_drq); return 0; } } else ia->ia_drq = uha->sc_drq; ia->ia_msize = 0; ia->ia_iosize = 16; return 1; } uhaprint() { } /* * Attach all the sub-devices we can find */ void uhaattach(parent, self, aux) struct device *parent, *self; void *aux; { struct isa_attach_args *ia = aux; struct uha_softc *uha = (void *)self; if (ia->ia_drq != DRQUNK) isa_dmacascade(ia->ia_drq); (uha->init)(uha); TAILQ_INIT(&uha->free_mscp); /* * fill in the prototype scsi_link. */ uha->sc_link.adapter_softc = uha; uha->sc_link.adapter_target = uha->uha_scsi_dev; uha->sc_link.adapter = &uha_switch; uha->sc_link.device = &uha_dev; uha->sc_link.openings = 2; printf("\n"); #ifdef NEWCONFIG isa_establish(&uha->sc_id, &uha->sc_dev); #endif uha->sc_ih = isa_intr_establish(ia->ia_irq, ISA_IST_EDGE, ISA_IPL_BIO, uha->intr, uha); /* * ask the adapter what subunits are present */ config_found(self, &uha->sc_link, uhaprint); } /* * Catch an interrupt from the adaptor */ int u14intr(arg) void *arg; { struct uha_softc *uha = arg; struct uha_mscp *mscp; u_char uhastat; u_long mboxval; int iobase = uha->sc_iobase; #ifdef UHADEBUG printf("%s: uhaintr ", uha->sc_dev.dv_xname); #endif /*UHADEBUG */ if ((inb(iobase + U14_SINT) & U14_SDIP) == 0) return 0; for (;;) { /* * First get all the information and then * acknowledge the interrupt */ uhastat = inb(iobase + U14_SINT); mboxval = inl(iobase + U14_ICMPTR); outb(iobase + U14_SINT, U14_ICM_ACK); #ifdef UHADEBUG printf("status = 0x%x ", uhastat); #endif /*UHADEBUG*/ /* * Process the completed operation */ mscp = uha_mscp_phys_kv(uha, mboxval); if (!mscp) { printf("%s: BAD MSCP RETURNED!\n", uha->sc_dev.dv_xname); continue; /* whatever it was, it'll timeout */ } untimeout(uha_timeout, mscp); uha_done(uha, mscp); if ((inb(iobase + U14_SINT) & U14_SDIP) == 0) return 1; } } int u24intr(arg) void *arg; { struct uha_softc *uha = arg; struct uha_mscp *mscp; u_char uhastat; u_long mboxval; int iobase = uha->sc_iobase; #ifdef UHADEBUG printf("%s: uhaintr ", uha->sc_dev.dv_xname); #endif /*UHADEBUG */ if ((inb(iobase + U24_SINT) & U24_SDIP) == 0) return 0; for (;;) { /* * First get all the information and then * acknowledge the interrupt */ uhastat = inb(iobase + U24_SINT); mboxval = inl(iobase + U24_ICMPTR); outb(iobase + U24_SINT, U24_ICM_ACK); outb(iobase + U24_ICMCMD, 0); #ifdef UHADEBUG printf("status = 0x%x ", uhastat); #endif /*UHADEBUG*/ /* * Process the completed operation */ mscp = uha_mscp_phys_kv(uha, mboxval); if (!mscp) { printf("%s: BAD MSCP RETURNED!\n", uha->sc_dev.dv_xname); continue; /* whatever it was, it'll timeout */ } untimeout(uha_timeout, mscp); uha_done(uha, mscp); if ((inb(iobase + U24_SINT) & U24_SDIP) == 0) return 1; } } /* * We have a mscp which has been processed by the adaptor, now we look to see * how the operation went. */ void uha_done(uha, mscp) struct uha_softc *uha; struct uha_mscp *mscp; { struct scsi_sense_data *s1, *s2; struct scsi_xfer *xs = mscp->xs; SC_DEBUG(xs->sc_link, SDEV_DB2, ("uha_done\n")); /* * Otherwise, put the results of the operation * into the xfer and call whoever started it */ if ((xs->flags & INUSE) == 0) { printf("%s: exiting but not in use!\n", uha->sc_dev.dv_xname); Debugger(); } if (xs->error == XS_NOERROR) { if (mscp->host_stat != UHA_NO_ERR) { switch (mscp->host_stat) { case UHA_SBUS_TIMEOUT: /* No response */ xs->error = XS_SELTIMEOUT; break; case UHA_SBUS_OVER_UNDER: SC_DEBUG(xs->sc_link, SDEV_DB3, ("scsi bus xfer over/underrun\n")); xs->error = XS_DRIVER_STUFFUP; break; case UHA_BAD_SG_LIST: SC_DEBUG(xs->sc_link, SDEV_DB3, ("bad sg list reported back\n")); xs->error = XS_DRIVER_STUFFUP; break; default: /* Other scsi protocol messes */ printf("%s: host_stat %x\n", uha->sc_dev.dv_xname, mscp->host_stat); xs->error = XS_DRIVER_STUFFUP; } } else if (mscp->target_stat != SCSI_OK) { switch (mscp->target_stat) { case SCSI_CHECK: s1 = &mscp->mscp_sense; s2 = &xs->sense; *s2 = *s1; xs->error = XS_SENSE; break; case SCSI_BUSY: xs->error = XS_BUSY; break; default: printf("%s: target_stat %x\n", uha->sc_dev.dv_xname, mscp->target_stat); xs->error = XS_DRIVER_STUFFUP; } } else xs->resid = 0; } xs->flags |= ITSDONE; uha_free_mscp(uha, mscp, xs->flags); scsi_done(xs); } /* * A mscp (and hence a mbx-out) is put onto the free list. */ void uha_free_mscp(uha, mscp, flags) struct uha_softc *uha; struct uha_mscp *mscp; int flags; { int opri; opri = splbio(); mscp->flags = MSCP_FREE; TAILQ_INSERT_HEAD(&uha->free_mscp, mscp, chain); /* * If there were none, wake abybody waiting for * one to come free, starting with queued entries */ if (!mscp->chain.tqe_next) wakeup(&uha->free_mscp); splx(opri); } /* * Get a free mscp * * If there are none, see if we can allocate a new one. If so, put it in the * hash table too otherwise either return an error or sleep. */ struct uha_mscp * uha_get_mscp(uha, flags) struct uha_softc *uha; int flags; { int opri; struct uha_mscp *mscp; int hashnum; opri = splbio(); /* * If we can and have to, sleep waiting for one to come free * but only if we can't allocate a new one */ for (;;) { mscp = uha->free_mscp.tqh_first; if (mscp) { TAILQ_REMOVE(&uha->free_mscp, mscp, chain); break; } if (uha->nummscps < UHA_MSCP_MAX) { if (mscp = (struct uha_mscp *) malloc(sizeof(struct uha_mscp), M_TEMP, M_NOWAIT)) { bzero(mscp, sizeof(struct uha_mscp)); uha->nummscps++; /* * put in the phystokv hash table * Never gets taken out. */ mscp->hashkey = KVTOPHYS(mscp); hashnum = MSCP_HASH(mscp->hashkey); mscp->nexthash = uha->mscphash[hashnum]; uha->mscphash[hashnum] = mscp; } else { printf("%s: can't malloc mscp\n", uha->sc_dev.dv_xname); } break; } else { if ((flags & SCSI_NOSLEEP) == 0) tsleep(&uha->free_mscp, PRIBIO, "uhamsc", 0); } } splx(opri); return mscp; } /* * given a physical address, find the mscp that it corresponds to. */ struct uha_mscp * uha_mscp_phys_kv(uha, mscp_phys) struct uha_softc *uha; u_long mscp_phys; { int hashnum = MSCP_HASH(mscp_phys); struct uha_mscp *mscp = uha->mscphash[hashnum]; while (mscp) { if (mscp->hashkey == mscp_phys) break; mscp = mscp->nexthash; } return mscp; } /* * Start the board, ready for normal operation */ int u14_find(uha, ia) struct uha_softc *uha; struct isa_attach_args *ia; { int iobase = uha->sc_iobase; u_short model, config; int resetcount = 4000; /* 4 secs? */ if (ia->ia_iobase == IOBASEUNK) return ENXIO; model = htons(inw(iobase + U14_ID)); if ((model & 0xfff0) != 0x5640) return ENXIO; config = htons(inw(iobase + U14_CONFIG)); switch (model & 0x000f) { case 0x0001: /* This is a 34f, and doens't need an ISA DMA channel. */ uha->sc_drq = DRQUNK; break; default: switch (config & U14_DMA_MASK) { case U14_DMA_CH5: uha->sc_drq = 5; break; case U14_DMA_CH6: uha->sc_drq = 6; break; case U14_DMA_CH7: uha->sc_drq = 7; break; default: printf("illegal dma setting %x\n", config & U14_DMA_MASK); return EIO; } break; } switch (config & U14_IRQ_MASK) { case U14_IRQ10: uha->sc_irq = 10; break; case U14_IRQ11: uha->sc_irq = 11; break; case U14_IRQ14: uha->sc_irq = 14; break; case U14_IRQ15: uha->sc_irq = 15; break; default: printf("illegal int setting %x\n", config & U14_IRQ_MASK); return EIO; } /* who are we on the scsi bus */ uha->uha_scsi_dev = config & U14_HOSTID_MASK; outb(iobase + U14_LINT, UHA_ASRST); while (--resetcount) { if (inb(iobase + U14_LINT)) break; delay(1000); /* 1 mSec per loop */ } if (!resetcount) { printf("%s: board timed out during reset\n", uha->sc_dev.dv_xname); return ENXIO; } /* Save function pointers for later use. */ uha->send_mbox = u14_send_mbox; uha->abort = u14_abort; uha->poll = u14_poll; uha->intr = u14intr; uha->init = u14_init; return 0; } int u24_find(uha, ia) struct uha_softc *uha; struct isa_attach_args *ia; { static int uha_slot = 0; int iobase; u_short vendor, model; u_char config0, config1, config2; u_char irq_ch, uha_id; int resetcount = 4000; /* 4 secs? */ if (ia->ia_iobase != IOBASEUNK) return ENXIO; while (uha_slot < 15) { uha_slot++; iobase = 0x1000 * uha_slot; vendor = htons(inw(iobase + EISA_VENDOR)); if (vendor != 0x5663) /* `USC' */ continue; model = htons(inw(iobase + EISA_MODEL)); if ((model & 0xfff0) != 0x0240) { #ifndef trusted printf("u24_find: ignoring model %04x\n", model); #endif continue; } #if 0 outb(iobase + EISA_CONTROL, EISA_ENABLE | EISA_RESET); delay(10); outb(iobase + EISA_CONTROL, EISA_ENABLE); /* Wait for reset? */ delay(1000); #endif config0 = inb(iobase + U24_CONFIG); config1 = inb(iobase + U24_CONFIG + 1); config2 = inb(iobase + U24_CONFIG + 2); if ((config0 & U24_MAGIC1) == 0 || (config1 & U24_MAGIC2) == 0) continue; irq_ch = config0 & U24_IRQ_MASK; uha_id = config2 & U24_HOSTID_MASK; uha->sc_drq = DRQUNK; switch (irq_ch) { case U24_IRQ10: uha->sc_irq = 10; break; case U24_IRQ11: uha->sc_irq = 11; break; case U24_IRQ14: uha->sc_irq = 14; break; case U24_IRQ15: uha->sc_irq = 15; break; default: printf("illegal int setting %x\n", irq_ch); continue; } /* who are we on the scsi bus */ uha->uha_scsi_dev = uha_id; outb(iobase + U24_LINT, UHA_ASRST); while (--resetcount) { if (inb(iobase + U24_LINT)) break; delay(1000); /* 1 mSec per loop */ } if (!resetcount) { printf("%s: board timed out during reset\n", uha->sc_dev.dv_xname); continue; } /* Save function pointers for later use. */ uha->send_mbox = u24_send_mbox; uha->abort = u24_abort; uha->poll = u24_poll; uha->intr = u24intr; uha->init = u24_init; return 0; } return ENXIO; } void u14_init(uha) struct uha_softc *uha; { int iobase = uha->sc_iobase; /* make sure interrupts are enabled */ #ifdef UHADEBUG printf("u14_init: lmask=%02x, smask=%02x\n", inb(iobase + U14_LMASK), inb(iobase + U14_SMASK)); #endif outb(0xd1, iobase + U14_LMASK); /* XXX */ outb(0x91, iobase + U14_SMASK); /* XXX */ } void u24_init(uha) struct uha_softc *uha; { int iobase = uha->sc_iobase; /* free OGM and ICM */ outb(iobase + U24_OGMCMD, 0); outb(iobase + U24_ICMCMD, 0); /* make sure interrupts are enabled */ #ifdef UHADEBUG printf("u24_init: lmask=%02x, smask=%02x\n", inb(iobase + U24_LMASK), inb(iobase + U24_SMASK)); #endif outb(0xd2, iobase + U24_LMASK); /* XXX */ outb(0x92, iobase + U24_SMASK); /* XXX */ } void uhaminphys(bp) struct buf *bp; { if (bp->b_bcount > ((UHA_NSEG - 1) << PGSHIFT)) bp->b_bcount = ((UHA_NSEG - 1) << PGSHIFT); } /* * start a scsi operation given the command and the data address. Also * needs the unit, target and lu. */ int uha_scsi_cmd(xs) struct scsi_xfer *xs; { struct scsi_link *sc_link = xs->sc_link; struct uha_softc *uha = sc_link->adapter_softc; struct uha_mscp *mscp; struct uha_dma_seg *sg; int seg; /* scatter gather seg being worked on */ u_long thiskv, thisphys, nextphys; int bytes_this_seg, bytes_this_page, datalen, flags; struct iovec *iovp; int s; SC_DEBUG(sc_link, SDEV_DB2, ("uha_scsi_cmd\n")); /* * get a mscp (mbox-out) to use. If the transfer * is from a buf (possibly from interrupt time) * then we can't allow it to sleep */ flags = xs->flags; if ((flags & (ITSDONE|INUSE)) != INUSE) { printf("%s: done or not in use?\n", uha->sc_dev.dv_xname); xs->flags &= ~ITSDONE; xs->flags |= INUSE; } if ((mscp = uha_get_mscp(uha, flags)) == NULL) { xs->error = XS_DRIVER_STUFFUP; return TRY_AGAIN_LATER; } mscp->flags = MSCP_ACTIVE; mscp->xs = xs; /* * Put all the arguments for the xfer in the mscp */ if (flags & SCSI_RESET) { mscp->opcode = UHA_SDR; mscp->ca = 0x01; } else { mscp->opcode = UHA_TSP; /* XXX Not for tapes. */ mscp->ca = 0x01; } mscp->xdir = UHA_SDET; mscp->dcn = 0x00; mscp->chan = 0x00; mscp->target = sc_link->target; mscp->lun = sc_link->lun; mscp->scsi_cmd_length = xs->cmdlen; mscp->sense_ptr = KVTOPHYS(&mscp->mscp_sense); mscp->req_sense_length = sizeof(mscp->mscp_sense); mscp->host_stat = 0x00; mscp->target_stat = 0x00; if (xs->datalen && (flags & SCSI_RESET) == 0) { mscp->data_addr = KVTOPHYS(mscp->uha_dma); sg = mscp->uha_dma; seg = 0; mscp->sgth = 0x01; #ifdef TFS if (flags & SCSI_DATA_UIO) { iovp = ((struct uio *) xs->data)->uio_iov; datalen = ((struct uio *) xs->data)->uio_iovcnt; xs->datalen = 0; while (datalen && seg < UHA_NSEG) { sg->seg_addr = (physaddr)iovp->iov_base; sg->seg_len = iovp->iov_len; xs->datalen += iovp->iov_len; SC_DEBUGN(sc_link, SDEV_DB4, ("(0x%x@0x%x)", iovp->iov_len, iovp->iov_base)); sg++; iovp++; seg++; datalen--; } } else #endif /*TFS */ { /* * Set up the scatter gather block */ SC_DEBUG(sc_link, SDEV_DB4, ("%d @0x%x:- ", xs->datalen, xs->data)); datalen = xs->datalen; thiskv = (int) xs->data; thisphys = KVTOPHYS(thiskv); while (datalen && seg < UHA_NSEG) { bytes_this_seg = 0; /* put in the base address */ sg->seg_addr = thisphys; SC_DEBUGN(sc_link, SDEV_DB4, ("0x%x", thisphys)); /* do it at least once */ nextphys = thisphys; while (datalen && thisphys == nextphys) { /* * This page is contiguous (physically) * with the the last, just extend the * length */ /* how far to the end of the page */ nextphys = (thisphys & ~PGOFSET) + NBPG; bytes_this_page = nextphys - thisphys; /**** or the data ****/ bytes_this_page = min(bytes_this_page, datalen); bytes_this_seg += bytes_this_page; datalen -= bytes_this_page; /* get more ready for the next page */ thiskv = (thiskv & ~PGOFSET) + NBPG; if (datalen) thisphys = KVTOPHYS(thiskv); } /* * next page isn't contiguous, finish the seg */ SC_DEBUGN(sc_link, SDEV_DB4, ("(0x%x)", bytes_this_seg)); sg->seg_len = bytes_this_seg; sg++; seg++; } } /* end of iov/kv decision */ mscp->data_length = xs->datalen; mscp->sg_num = seg; SC_DEBUGN(sc_link, SDEV_DB4, ("\n")); if (datalen) { /* * there's still data, must have run out of segs! */ printf("%s: uha_scsi_cmd, more than %d dma segs\n", uha->sc_dev.dv_xname, UHA_NSEG); xs->error = XS_DRIVER_STUFFUP; uha_free_mscp(uha, mscp, flags); return COMPLETE; } } else { /* No data xfer, use non S/G values */ mscp->data_addr = (physaddr)0; mscp->data_length = 0; mscp->sgth = 0x00; mscp->sg_num = 0; } mscp->link_id = 0; mscp->link_addr = (physaddr)0; /* * Put the scsi command in the mscp and start it */ if ((flags & SCSI_RESET) == 0) bcopy(xs->cmd, &mscp->scsi_cmd, mscp->scsi_cmd_length); s = splbio(); (uha->send_mbox)(uha, mscp); /* * Usually return SUCCESSFULLY QUEUED */ if ((flags & SCSI_POLL) == 0) { timeout(uha_timeout, mscp, (xs->timeout * hz) / 1000); splx(s); return SUCCESSFULLY_QUEUED; } splx(s); /* * If we can't use interrupts, poll on completion */ if ((uha->poll)(uha, xs, xs->timeout)) { uha_timeout(mscp); if (!(uha->abort)(uha, mscp)) uha_timeout(mscp); } return COMPLETE; } void uha_timeout(arg) void *arg; { struct uha_mscp *mscp = arg; struct scsi_xfer *xs = mscp->xs; struct scsi_link *sc_link = xs->sc_link; struct uha_softc *uha = sc_link->adapter_softc; int s; sc_print_addr(sc_link); printf("timed out"); s = splbio(); if (!(uha->abort)(uha, mscp) || (mscp->flags == MSCP_ABORTED)) { /* abort timed out */ printf(" AGAIN\n"); mscp->xs->retries = 0; /* I MEAN IT ! */ mscp->host_stat = UHA_SBUS_TIMEOUT; uha_done(uha, mscp); } else { /* abort the operation that has timed out */ printf("\n"); mscp->flags = MSCP_ABORTED; /* 2 secs for the abort */ if ((xs->flags & SCSI_POLL) == 0) timeout(uha_timeout, mscp, 2 * hz); } splx(s); } #ifdef UHADEBUG void uha_print_mscp(mscp) struct uha_mscp *mscp; { printf("mscp:%x op:%x cmdlen:%d senlen:%d\n", mscp, mscp->opcode, mscp->cdblen, mscp->senselen); printf(" sg:%d sgnum:%x datlen:%d hstat:%x tstat:%x flags:%x\n", mscp->sgth, mscp->sg_num, mscp->datalen, mscp->host_stat, mscp->target_stat, mscp->flags); show_scsi_cmd(mscp->xs); } void uha_print_active_mscp(uha) struct uha_softc *uha; { struct uha_mscp *mscp; int i = 0; while (i++ < MSCP_HASH_SIZE) { mscp = uha->mscphash[i]; while (mscp) { if (mscp->flags != MSCP_FREE) uha_print_mscp(mscp); mscp = mscp->nexthash; } } } #endif /*UHADEBUG */