/* $NetBSD: if_wpireg.h,v 1.9 2007/12/25 18:33:41 perry Exp $ */ /*- * Copyright (c) 2006 * Damien Bergamini * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #define WPI_TX_RING_COUNT 256 #define WPI_CMD_RING_COUNT 256 #define WPI_RX_RING_COUNT 64 #define WPI_BUF_ALIGN 4096 /* * Rings must be aligned on a four 4K-pages boundary. * I had a hard time figuring this out. */ #define WPI_RING_DMA_ALIGN 0x4000 /* maximum scatter/gather */ #define WPI_MAX_SCATTER 4 /* maximum Rx buffer size (larger than MCLBYTES) */ #define WPI_RBUF_SIZE (3 * 1024) /* XXX 3000 but must be aligned! */ /* * Control and status registers. */ #define WPI_HWCONFIG 0x000 #define WPI_INTR 0x008 #define WPI_MASK 0x00c #define WPI_INTR_STATUS 0x010 #define WPI_GPIO_STATUS 0x018 #define WPI_RESET 0x020 #define WPI_GPIO_CTL 0x024 #define WPI_EEPROM_CTL 0x02c #define WPI_EEPROM_STATUS 0x030 #define WPI_UCODE_CLR 0x05c #define WPI_TEMPERATURE 0x060 #define WPI_CHICKEN 0x100 #define WPI_PLL_CTL 0x20c #define WPI_WRITE_MEM_ADDR 0x444 #define WPI_READ_MEM_ADDR 0x448 #define WPI_WRITE_MEM_DATA 0x44c #define WPI_READ_MEM_DATA 0x450 #define WPI_TX_WIDX 0x460 #define WPI_TX_CTL(qid) (0x940 + (qid) * 8) #define WPI_TX_BASE(qid) (0x944 + (qid) * 8) #define WPI_TX_DESC(qid) (0x980 + (qid) * 80) #define WPI_RX_CONFIG 0xc00 #define WPI_RX_BASE 0xc04 #define WPI_RX_WIDX 0xc20 #define WPI_RX_RIDX_PTR 0xc24 #define WPI_RX_CTL 0xcc0 #define WPI_RX_STATUS 0xcc4 #define WPI_TX_CONFIG(qid) (0xd00 + (qid) * 32) #define WPI_TX_CREDIT(qid) (0xd04 + (qid) * 32) #define WPI_TX_STATE(qid) (0xd08 + (qid) * 32) #define WPI_TX_BASE_PTR 0xe80 #define WPI_MSG_CONFIG 0xe88 #define WPI_TX_STATUS 0xe90 /* * NIC internal memory offsets. */ #define WPI_MEM_MODE 0x2e00 #define WPI_MEM_RA 0x2e04 #define WPI_MEM_TXCFG 0x2e10 #define WPI_MEM_MAGIC4 0x2e14 #define WPI_MEM_MAGIC5 0x2e20 #define WPI_MEM_BYPASS1 0x2e2c #define WPI_MEM_BYPASS2 0x2e30 #define WPI_MEM_CLOCK1 0x3004 #define WPI_MEM_CLOCK2 0x3008 #define WPI_MEM_POWER 0x300c #define WPI_MEM_PCIDEV 0x3010 #define WPI_MEM_RFKILL 0x3014 #define WPI_MEM_UCODE_CTL 0x3400 #define WPI_MEM_UCODE_SRC 0x3404 #define WPI_MEM_UCODE_DST 0x3408 #define WPI_MEM_UCODE_SIZE 0x340c #define WPI_MEM_UCODE_BASE 0x3800 #define WPI_MEM_TEXT_BASE 0x3490 #define WPI_MEM_TEXT_SIZE 0x3494 #define WPI_MEM_DATA_BASE 0x3498 #define WPI_MEM_DATA_SIZE 0x349c /* possible flags for register WPI_HWCONFIG */ #define WPI_HW_ALM_MB (1 << 8) #define WPI_HW_ALM_MM (1 << 9) #define WPI_HW_SKU_MRC (1 << 10) #define WPI_HW_REV_D (1 << 11) #define WPI_HW_TYPE_B (1 << 12) /* possible flags for registers WPI_READ_MEM_ADDR/WPI_WRITE_MEM_ADDR */ #define WPI_MEM_4 ((sizeof (uint32_t) - 1) << 24) /* possible values for WPI_MEM_UCODE_DST */ #define WPI_FW_TEXT 0x00000000 /* possible flags for WPI_GPIO_STATUS */ #define WPI_POWERED (1 << 9) /* possible flags for register WPI_RESET */ #define WPI_NEVO_RESET (1 << 0) #define WPI_SW_RESET (1 << 7) #define WPI_MASTER_DISABLED (1 << 8) #define WPI_STOP_MASTER (1 << 9) /* possible flags for register WPI_GPIO_CTL */ #define WPI_GPIO_CLOCK (1 << 0) #define WPI_GPIO_INIT (1 << 2) #define WPI_GPIO_MAC (1 << 3) #define WPI_GPIO_SLEEP (1 << 4) #define WPI_GPIO_PWR_STATUS 0x07000000 #define WPI_GPIO_PWR_SLEEP (4 << 24) /* possible flags for register WPI_CHICKEN */ #define WPI_CHICKEN_RXNOLOS (1 << 23) /* possible flags for register WPI_PLL_CTL */ #define WPI_PLL_INIT (1 << 24) /* possible flags for register WPI_UCODE_CLR */ #define WPI_RADIO_OFF (1 << 1) #define WPI_DISABLE_CMD (1 << 2) /* possible flags for WPI_RX_STATUS */ #define WPI_RX_IDLE (1 << 24) /* possible flags for register WPI_UC_CTL */ #define WPI_UC_ENABLE (1 << 30) #define WPI_UC_RUN (1 << 31) /* possible flags for register WPI_INTR_CSR */ #define WPI_ALIVE_INTR (1 << 0) #define WPI_WAKEUP_INTR (1 << 1) #define WPI_SW_ERROR (1 << 25) #define WPI_TX_INTR (1 << 27) #define WPI_HW_ERROR (1 << 29) #define WPI_RX_INTR (1 << 31) #define WPI_INTR_MASK \ (WPI_SW_ERROR | WPI_HW_ERROR | WPI_TX_INTR | WPI_RX_INTR | \ WPI_ALIVE_INTR | WPI_WAKEUP_INTR) /* possible flags for register WPI_TX_STATUS */ #define WPI_TX_IDLE(qid) (1 << ((qid) + 24) | 1 << ((qid) + 16)) /* possible flags for register WPI_EEPROM_CTL */ #define WPI_EEPROM_READY (1 << 0) /* possible flags for register WPI_EEPROM_STATUS */ #define WPI_EEPROM_VERSION 0x00000007 #define WPI_EEPROM_LOCKED 0x00000180 struct wpi_shared { uint32_t txbase[8]; uint32_t next; uint32_t reserved[2]; } __packed; #define WPI_MAX_SEG_LEN 65520 struct wpi_tx_desc { uint32_t flags; #define WPI_PAD32(x) ((((x) + 3) & ~3) - (x)) struct { uint32_t addr; uint32_t len; } __packed segs[WPI_MAX_SCATTER]; uint8_t reserved[28]; } __packed; struct wpi_tx_stat { uint8_t nrts; uint8_t ntries; uint8_t nkill; uint8_t rate; uint32_t duration; uint32_t status; } __packed; struct wpi_rx_desc { uint32_t len; uint8_t type; #define WPI_UC_READY 1 #define WPI_RX_DONE 27 #define WPI_TX_DONE 28 #define WPI_START_SCAN 130 #define WPI_STOP_SCAN 132 #define WPI_STATE_CHANGED 161 uint8_t flags; uint8_t idx; uint8_t qid; } __packed; struct wpi_rx_stat { uint8_t len; #define WPI_STAT_MAXLEN 20 uint8_t id; uint8_t rssi; /* received signal strength */ #define WPI_RSSI_OFFSET 95 uint8_t agc; /* access gain control */ uint16_t signal; uint16_t noise; } __packed; struct wpi_rx_head { uint16_t chan; uint16_t flags; uint8_t reserved; uint8_t rate; uint16_t len; } __packed; struct wpi_rx_tail { uint32_t flags; #define WPI_RX_NO_CRC_ERR (1 << 0) #define WPI_RX_NO_OVFL_ERR (1 << 1) /* shortcut for the above */ #define WPI_RX_NOERROR (WPI_RX_NO_CRC_ERR | WPI_RX_NO_OVFL_ERR) uint64_t tstamp; uint32_t tbeacon; } __packed; struct wpi_tx_cmd { uint8_t code; #define WPI_CMD_CONFIGURE 16 #define WPI_CMD_ASSOCIATE 17 #define WPI_CMD_SET_WME 19 #define WPI_CMD_TSF 20 #define WPI_CMD_ADD_NODE 24 #define WPI_CMD_TX_DATA 28 #define WPI_CMD_MRR_SETUP 71 #define WPI_CMD_SET_LED 72 #define WPI_CMD_SET_POWER_MODE 119 #define WPI_CMD_SCAN 128 #define WPI_CMD_SET_BEACON 145 #define WPI_CMD_TXPOWER 151 #define WPI_CMD_BLUETOOTH 155 uint8_t flags; uint8_t idx; uint8_t qid; uint8_t data[124]; } __packed; /* structure for WPI_CMD_CONFIGURE */ struct wpi_config { uint8_t myaddr[IEEE80211_ADDR_LEN]; uint16_t reserved1; uint8_t bssid[IEEE80211_ADDR_LEN]; uint16_t reserved2; uint32_t reserved3[2]; uint8_t mode; #define WPI_MODE_HOSTAP 1 #define WPI_MODE_STA 3 #define WPI_MODE_IBSS 4 #define WPI_MODE_MONITOR 6 uint8_t reserved4[3]; uint8_t ofdm_mask; uint8_t cck_mask; uint16_t associd; uint32_t flags; #define WPI_CONFIG_24GHZ (1 << 0) #define WPI_CONFIG_CCK (1 << 1) #define WPI_CONFIG_AUTO (1 << 2) #define WPI_CONFIG_SHSLOT (1 << 4) #define WPI_CONFIG_SHPREAMBLE (1 << 5) #define WPI_CONFIG_NODIVERSITY (1 << 7) #define WPI_CONFIG_ANTENNA_A (1 << 8) #define WPI_CONFIG_ANTENNA_B (1 << 9) #define WPI_CONFIG_TSF (1 << 15) uint32_t filter; #define WPI_FILTER_PROMISC (1 << 0) #define WPI_FILTER_CTL (1 << 1) #define WPI_FILTER_MULTICAST (1 << 2) #define WPI_FILTER_NODECRYPT (1 << 3) #define WPI_FILTER_BSS (1 << 5) #define WPI_FILTER_BEACON (1 << 6) uint8_t chan; uint8_t reserved6[3]; } __packed; /* structure for command WPI_CMD_ASSOCIATE */ struct wpi_assoc { uint32_t flags; uint32_t filter; uint8_t ofdm_mask; uint8_t cck_mask; uint16_t reserved; } __packed; /* structure for command WPI_CMD_SET_WME */ struct wpi_wme_setup { uint32_t flags; struct { uint16_t cwmin; uint16_t cwmax; uint8_t aifsn; uint8_t reserved; uint16_t txop; } __packed ac[WME_NUM_AC]; } __packed; /* structure for command WPI_CMD_TSF */ struct wpi_cmd_tsf { uint64_t tstamp; uint16_t bintval; uint16_t atim; uint32_t binitval; uint16_t lintval; uint16_t reserved; } __packed; /* structure for WPI_CMD_ADD_NODE */ struct wpi_node_info { uint8_t control; #define WPI_NODE_UPDATE (1 << 0) uint8_t reserved1[3]; uint8_t bssid[IEEE80211_ADDR_LEN]; uint16_t reserved2; uint8_t id; #define WPI_ID_BSS 0 #define WPI_ID_BROADCAST 24 uint8_t flags; uint16_t reserved3; uint16_t key_flags; uint8_t tkip; uint8_t reserved4; uint16_t ttak[5]; uint16_t reserved5; uint8_t key[IEEE80211_KEYBUF_SIZE]; uint32_t action; #define WPI_ACTION_SET_RATE 4 uint32_t mask; uint16_t tid; uint8_t rate; uint8_t antenna; #define WPI_ANTENNA_A (1 << 6) #define WPI_ANTENNA_B (1 << 7) #define WPI_ANTENNA_BOTH (WPI_ANTENNA_A | WPI_ANTENNA_B) uint8_t add_imm; uint8_t del_imm; uint16_t add_imm_start; } __packed; /* structure for command WPI_CMD_TX_DATA */ struct wpi_cmd_data { uint16_t len; uint16_t lnext; uint32_t flags; #define WPI_TX_NEED_RTS (1 << 1) #define WPI_TX_NEED_ACK (1 << 3) #define WPI_TX_FULL_TXOP (1 << 7) #define WPI_TX_BT_DISABLE (1 << 12) /* bluetooth coexistence */ #define WPI_TX_AUTO_SEQ (1 << 13) #define WPI_TX_INSERT_TSTAMP (1 << 16) uint8_t rate; uint8_t id; uint8_t tid; uint8_t security; uint8_t key[IEEE80211_KEYBUF_SIZE]; uint8_t tkip[IEEE80211_WEP_MICLEN]; uint32_t fnext; uint32_t lifetime; #define WPI_LIFETIME_INFINITE 0xffffffff uint8_t ofdm_mask; uint8_t cck_mask; uint8_t rts_ntries; uint8_t data_ntries; uint16_t timeout; uint16_t txop; } __packed; /* structure for command WPI_CMD_SET_BEACON */ struct wpi_cmd_beacon { uint16_t len; uint16_t reserved1; uint32_t flags; /* same as wpi_cmd_data */ uint8_t rate; uint8_t id; uint8_t reserved2[30]; uint32_t lifetime; uint8_t ofdm_mask; uint8_t cck_mask; uint16_t reserved3[3]; uint16_t tim; uint8_t timsz; uint8_t reserved4; struct ieee80211_frame wh; } __packed; /* structure for WPI_CMD_MRR_SETUP */ struct wpi_mrr_setup { uint32_t which; #define WPI_MRR_CTL 0 #define WPI_MRR_DATA 1 struct { uint8_t plcp; uint8_t flags; uint8_t ntries; uint8_t next; #define WPI_OFDM6 0 #define WPI_OFDM54 7 #define WPI_CCK1 8 #define WPI_CCK2 9 #define WPI_CCK11 11 } __packed rates[WPI_CCK11 + 1]; } __packed; /* structure for WPI_CMD_SET_LED */ struct wpi_cmd_led { uint32_t unit; /* multiplier (in usecs) */ uint8_t which; #define WPI_LED_ACTIVITY 1 #define WPI_LED_LINK 2 uint8_t off; uint8_t on; uint8_t reserved; } __packed; /* structure for WPI_CMD_SET_POWER_MODE */ struct wpi_power { uint32_t flags; #define WPI_POWER_CAM 0 /* constantly awake mode */ uint32_t rx_timeout; uint32_t tx_timeout; uint32_t sleep[5]; } __packed; /* structure for command WPI_CMD_SCAN */ struct wpi_scan_essid { uint8_t id; uint8_t len; uint8_t data[IEEE80211_NWID_LEN]; } __packed; struct wpi_scan_hdr { uint16_t len; uint8_t reserved1; uint8_t nchan; uint16_t quiet; uint16_t plcp_threshold; uint16_t crc_threshold; uint16_t reserved2; uint32_t max_svc; /* background scans */ uint32_t pause_svc; /* background scans */ uint32_t flags; uint32_t filter; /* wpi_cmd_data structure */ uint16_t paylen; uint16_t lnext; uint32_t txflags; uint8_t rate; uint8_t id; uint8_t tid; uint8_t security; uint8_t key[IEEE80211_KEYBUF_SIZE]; uint8_t tkip[IEEE80211_WEP_MICLEN]; uint32_t fnext; uint32_t lifetime; uint8_t ofdm_mask; uint8_t cck_mask; uint8_t rts_ntries; uint8_t data_ntries; uint16_t timeout; uint16_t txop; struct wpi_scan_essid essid[4]; /* followed by probe request body */ /* followed by nchan x wpi_scan_chan */ } __packed; struct wpi_scan_chan { uint8_t flags; uint8_t chan; #define WPI_CHAN_ACTIVE (1 << 0) #define WPI_CHAN_DIRECT (1 << 1) uint8_t rf_gain; uint8_t dsp_gain; uint16_t active; /* msecs */ uint16_t passive; /* msecs */ } __packed; /* structure for WPI_CMD_TXPOWER */ struct wpi_cmd_txpower { uint8_t band; #define WPI_BAND_5GHZ 0 #define WPI_BAND_2GHZ 1 uint8_t reserved; uint16_t chan; struct { uint8_t plcp; uint8_t rf_gain; uint8_t dsp_gain; uint8_t reserved; } __packed rates[WPI_CCK11 + 1]; } __packed; /* structure for WPI_CMD_BLUETOOTH */ struct wpi_bluetooth { uint8_t flags; uint8_t lead; uint8_t kill; uint8_t reserved; uint32_t ack; uint32_t cts; } __packed; /* structure for WPI_UC_READY notification */ struct wpi_ucode_info { uint32_t version; uint8_t revision[8]; uint8_t type; uint8_t subtype; uint16_t reserved; uint32_t logptr; uint32_t errorptr; uint32_t timestamp; uint32_t valid; } __packed; /* structure for WPI_START_SCAN notification */ struct wpi_start_scan { uint64_t tstamp; uint32_t tbeacon; uint8_t chan; uint8_t band; uint16_t reserved; uint32_t status; } __packed; /* structure for WPI_STOP_SCAN notification */ struct wpi_stop_scan { uint8_t nchan; uint8_t status; uint8_t reserved; uint8_t chan; uint64_t tsf; } __packed; /* firmware image header */ struct wpi_firmware_hdr { uint32_t version; uint32_t main_textsz; uint32_t main_datasz; uint32_t init_textsz; uint32_t init_datasz; uint32_t boot_textsz; } __packed; #define WPI_FW_MAIN_TEXT_MAXSZ (80 * 1024) #define WPI_FW_MAIN_DATA_MAXSZ (32 * 1024) #define WPI_FW_INIT_TEXT_MAXSZ (80 * 1024) #define WPI_FW_INIT_DATA_MAXSZ (32 * 1024) #define WPI_FW_BOOT_TEXT_MAXSZ (80 * 1024) #define WPI_FW_UPDATED (1 << 31) /* + * Offsets into EEPROM. + */ #define WPI_EEPROM_MAC 0x015 #define WPI_EEPROM_REVISION 0x035 #define WPI_EEPROM_CAPABILITIES 0x045 #define WPI_EEPROM_TYPE 0x04a #define WPI_EEPROM_DOMAIN 0x060 #define WPI_EEPROM_BAND1 0x063 #define WPI_EEPROM_BAND2 0x072 #define WPI_EEPROM_BAND3 0x080 #define WPI_EEPROM_BAND4 0x08d #define WPI_EEPROM_BAND5 0x099 #define WPI_EEPROM_POWER_GRP 0x100 struct wpi_eeprom_chan { uint8_t flags; #define WPI_EEPROM_CHAN_VALID (1 << 0) #define WPI_EEPROM_CHAN_IBSS (1 << 1) #define WPI_EEPROM_CHAN_ACTIVE (1 << 3) #define WPI_EEPROM_CHAN_RADAR (1 << 4) int8_t maxpwr; } __packed; struct wpi_eeprom_sample { uint8_t index; int8_t power; uint16_t volt; } __packed; #define WPI_POWER_GROUPS_COUNT 5 struct wpi_eeprom_group { struct wpi_eeprom_sample samples[5]; int32_t coef[5]; int32_t corr[5]; int8_t maxpwr; uint8_t chan; int16_t temp; } __packed; #define WPI_CHAN_BANDS_COUNT 5 #define WPI_MAX_CHAN_PER_BAND 14 static const struct wpi_chan_band { uint32_t addr; /* offset in EEPROM */ uint8_t nchan; uint8_t chan[WPI_MAX_CHAN_PER_BAND]; } wpi_bands[5] = { { WPI_EEPROM_BAND1, 14, { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 } }, { WPI_EEPROM_BAND2, 13, { 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16 } }, { WPI_EEPROM_BAND3, 12, { 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 } }, { WPI_EEPROM_BAND4, 11, { 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 } }, { WPI_EEPROM_BAND5, 6, { 145, 149, 153, 157, 161, 165 } } }; /* convert rate index (device view) into rate in 500Kbps unit */ static const uint8_t wpi_ridx_to_rate[] = { 12, 18, 24, 36, 48, 72, 96, 108, /* OFDM */ 2, 4, 11, 22 /* CCK */ }; /* convert rate index (device view) into PLCP code */ static const uint8_t wpi_ridx_to_plcp[] = { 0xd, 0xf, 0x5, 0x7, 0x9, 0xb, 0x1, 0x3, /* OFDM R1-R4 */ 10, 20, 55, 110 /* CCK */ }; #define WPI_MAX_PWR_INDEX 77 /* * RF Tx gain values from highest to lowest power (values obtained from * the reference driver.) */ static const uint8_t wpi_rf_gain_2ghz[WPI_MAX_PWR_INDEX + 1] = { 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xbb, 0xbb, 0xbb, 0xbb, 0xf3, 0xf3, 0xf3, 0xf3, 0xf3, 0xd3, 0xd3, 0xb3, 0xb3, 0xb3, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93, 0x93, 0x73, 0xeb, 0xeb, 0xeb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xcb, 0xab, 0xab, 0xab, 0x8b, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xe3, 0xc3, 0xc3, 0xc3, 0xc3, 0xa3, 0xa3, 0xa3, 0xa3, 0x83, 0x83, 0x83, 0x83, 0x63, 0x63, 0x63, 0x63, 0x43, 0x43, 0x43, 0x43, 0x23, 0x23, 0x23, 0x23, 0x03, 0x03, 0x03, 0x03 }; static const uint8_t wpi_rf_gain_5ghz[WPI_MAX_PWR_INDEX + 1] = { 0xfb, 0xfb, 0xfb, 0xdb, 0xdb, 0xbb, 0xbb, 0x9b, 0x9b, 0x7b, 0x7b, 0x7b, 0x7b, 0x5b, 0x3b, 0x3b, 0x3b, 0x3b, 0x3b, 0x3b, 0x1b, 0x1b, 0x1b, 0x73, 0x73, 0x73, 0x53, 0x53, 0x53, 0x53, 0x53, 0x33, 0x33, 0x33, 0x33, 0x13, 0x13, 0x13, 0x13, 0x13, 0xab, 0xab, 0xab, 0x8b, 0x8b, 0x8b, 0x8b, 0x6b, 0x6b, 0x6b, 0x6b, 0x4b, 0x4b, 0x4b, 0x4b, 0x2b, 0x2b, 0x2b, 0x2b, 0x0b, 0x0b, 0x0b, 0x0b, 0x83, 0x83, 0x63, 0x63, 0x63, 0x63, 0x43, 0x43, 0x43, 0x43, 0x23, 0x23, 0x23, 0x23, 0x03 }; /* * DSP pre-DAC gain values from highest to lowest power (values obtained * from the reference driver.) */ static const uint8_t wpi_dsp_gain_2ghz[WPI_MAX_PWR_INDEX + 1] = { 0x7f, 0x7f, 0x7f, 0x7f, 0x7d, 0x6e, 0x69, 0x62, 0x7d, 0x73, 0x6c, 0x63, 0x77, 0x6f, 0x69, 0x61, 0x5c, 0x6a, 0x64, 0x78, 0x71, 0x6b, 0x7d, 0x77, 0x70, 0x6a, 0x65, 0x61, 0x5b, 0x6b, 0x79, 0x73, 0x6d, 0x7f, 0x79, 0x73, 0x6c, 0x66, 0x60, 0x5c, 0x6e, 0x68, 0x62, 0x74, 0x7d, 0x77, 0x71, 0x6b, 0x65, 0x60, 0x71, 0x6a, 0x66, 0x5f, 0x71, 0x6a, 0x66, 0x5f, 0x71, 0x6a, 0x66, 0x5f, 0x71, 0x6a, 0x66, 0x5f, 0x71, 0x6a, 0x66, 0x5f, 0x71, 0x6a, 0x66, 0x5f, 0x71, 0x6a, 0x66, 0x5f }; static const uint8_t wpi_dsp_gain_5ghz[WPI_MAX_PWR_INDEX + 1] = { 0x7f, 0x78, 0x72, 0x77, 0x65, 0x71, 0x66, 0x72, 0x67, 0x75, 0x6b, 0x63, 0x5c, 0x6c, 0x7d, 0x76, 0x6d, 0x66, 0x60, 0x5a, 0x68, 0x62, 0x5c, 0x76, 0x6f, 0x68, 0x7e, 0x79, 0x71, 0x69, 0x63, 0x76, 0x6f, 0x68, 0x62, 0x74, 0x6d, 0x66, 0x62, 0x5d, 0x71, 0x6b, 0x63, 0x78, 0x71, 0x6b, 0x63, 0x78, 0x71, 0x6b, 0x63, 0x78, 0x71, 0x6b, 0x63, 0x78, 0x71, 0x6b, 0x63, 0x78, 0x71, 0x6b, 0x63, 0x6b, 0x63, 0x78, 0x71, 0x6b, 0x63, 0x78, 0x71, 0x6b, 0x63, 0x78, 0x71, 0x6b, 0x63, 0x78 }; #define WPI_READ(sc, reg) \ bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg)) #define WPI_WRITE(sc, reg, val) \ bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val)) #define WPI_WRITE_REGION_4(sc, offset, datap, count) \ bus_space_write_region_4((sc)->sc_st, (sc)->sc_sh, (offset), \ (datap), (count))