/* $NetBSD: lpt_isa.c,v 1.52 2002/01/07 21:47:10 thorpej Exp $ */ /* * Copyright (c) 1993, 1994 Charles M. Hannum. * Copyright (c) 1990 William F. Jolitz, TeleMuse * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This software is a component of "386BSD" developed by * William F. Jolitz, TeleMuse. * 4. Neither the name of the developer nor the name "386BSD" * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ * AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS * SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT. * THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT * NOT MAKE USE OF THIS WORK. * * FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED * BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN * REFERENCES SUCH AS THE "PORTING UNIX TO THE 386" SERIES * (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING * JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND * LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE * ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS * OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992. * * THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Device Driver for AT parallel printer port */ #include __KERNEL_RCSID(0, "$NetBSD: lpt_isa.c,v 1.52 2002/01/07 21:47:10 thorpej Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define LPTPRI (PZERO+8) #define LPT_BSIZE 1024 #ifndef LPTDEBUG #define LPRINTF(a) #else #define LPRINTF(a) if (lpt_isa_debug) printf a int lpt_isa_debug = 0; #endif struct lpt_isa_softc { struct lpt_softc sc_lpt; int sc_irq; }; int lpt_isa_probe __P((struct device *, struct cfdata *, void *)); void lpt_isa_attach __P((struct device *, struct device *, void *)); struct cfattach lpt_isa_ca = { sizeof(struct lpt_isa_softc), lpt_isa_probe, lpt_isa_attach }; int lpt_port_test __P((bus_space_tag_t, bus_space_handle_t, bus_addr_t, bus_size_t, u_char, u_char)); /* * Internal routine to lptprobe to do port tests of one byte value. */ int lpt_port_test(iot, ioh, base, off, data, mask) bus_space_tag_t iot; bus_space_handle_t ioh; bus_addr_t base; bus_size_t off; u_char data, mask; { int timeout; u_char temp; data &= mask; bus_space_write_1(iot, ioh, off, data); timeout = 1000; do { delay(10); temp = bus_space_read_1(iot, ioh, off) & mask; } while (temp != data && --timeout); LPRINTF(("lpt: port=0x%x out=0x%x in=0x%x timeout=%d\n", (unsigned)(base + off), (unsigned)data, (unsigned)temp, timeout)); return (temp == data); } /* * Logic: * 1) You should be able to write to and read back the same value * to the data port. Do an alternating zeros, alternating ones, * walking zero, and walking one test to check for stuck bits. * * 2) You should be able to write to and read back the same value * to the control port lower 5 bits, the upper 3 bits are reserved * per the IBM PC technical reference manauls and different boards * do different things with them. Do an alternating zeros, alternating * ones, walking zero, and walking one test to check for stuck bits. * * Some printers drag the strobe line down when the are powered off * so this bit has been masked out of the control port test. * * XXX Some printers may not like a fast pulse on init or strobe, I * don't know at this point, if that becomes a problem these bits * should be turned off in the mask byte for the control port test. * * 3) Set the data and control ports to a value of 0 */ int lpt_isa_probe(parent, match, aux) struct device *parent; struct cfdata *match; void *aux; { struct isa_attach_args *ia = aux; bus_space_tag_t iot; bus_space_handle_t ioh; u_long base; u_char mask, data; int i, rv; #ifdef DEBUG #define ABORT do {printf("lptprobe: mask %x data %x failed\n", mask, data); \ goto out;} while (0) #else #define ABORT goto out #endif if (ia->ia_nio < 1) return (0); if (ISA_DIRECT_CONFIG(ia)) return (0); /* Disallow wildcarded i/o address. */ if (ia->ia_io[0].ir_addr == ISACF_PORT_DEFAULT) return (0); iot = ia->ia_iot; base = ia->ia_io[0].ir_addr;; if (bus_space_map(iot, base, LPT_NPORTS, 0, &ioh)) return 0; rv = 0; mask = 0xff; data = 0x55; /* Alternating zeros */ if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask)) ABORT; data = 0xaa; /* Alternating ones */ if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask)) ABORT; for (i = 0; i < CHAR_BIT; i++) { /* Walking zero */ data = ~(1 << i); if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask)) ABORT; } for (i = 0; i < CHAR_BIT; i++) { /* Walking one */ data = (1 << i); if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask)) ABORT; } bus_space_write_1(iot, ioh, lpt_data, 0); bus_space_write_1(iot, ioh, lpt_control, 0); ia->ia_io[0].ir_size = LPT_NPORTS; ia->ia_niomem = 0; ia->ia_ndrq = 0; rv = 1; out: bus_space_unmap(iot, ioh, LPT_NPORTS); return rv; } void lpt_isa_attach(parent, self, aux) struct device *parent, *self; void *aux; { struct lpt_isa_softc *sc = (void *)self; struct lpt_softc *lsc = &sc->sc_lpt; struct isa_attach_args *ia = aux; bus_space_tag_t iot; bus_space_handle_t ioh; if (ia->ia_nirq < 1 || ia->ia_irq[0].ir_irq == ISACF_IRQ_DEFAULT) { sc->sc_irq = -1; printf(": polled\n"); } else { sc->sc_irq = ia->ia_irq[0].ir_irq; printf("\n"); } iot = lsc->sc_iot = ia->ia_iot; if (bus_space_map(iot, ia->ia_io[0].ir_addr, LPT_NPORTS, 0, &ioh)) { printf("%s: can't map i/o space\n", self->dv_xname); return; } lsc->sc_ioh = ioh; lpt_attach_subr(lsc); if (sc->sc_irq != -1) lsc->sc_ih = isa_intr_establish(ia->ia_ic, sc->sc_irq, IST_EDGE, IPL_TTY, lptintr, lsc); }