/* $NetBSD: parse.c,v 1.159 2009/11/06 20:20:56 dsl Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef MAKE_NATIVE static char rcsid[] = "$NetBSD: parse.c,v 1.159 2009/11/06 20:20:56 dsl Exp $"; #else #include #ifndef lint #if 0 static char sccsid[] = "@(#)parse.c 8.3 (Berkeley) 3/19/94"; #else __RCSID("$NetBSD: parse.c,v 1.159 2009/11/06 20:20:56 dsl Exp $"); #endif #endif /* not lint */ #endif /*- * parse.c -- * Functions to parse a makefile. * * One function, Parse_Init, must be called before any functions * in this module are used. After that, the function Parse_File is the * main entry point and controls most of the other functions in this * module. * * Most important structures are kept in Lsts. Directories for * the .include "..." function are kept in the 'parseIncPath' Lst, while * those for the .include <...> are kept in the 'sysIncPath' Lst. The * targets currently being defined are kept in the 'targets' Lst. * * The variables 'fname' and 'lineno' are used to track the name * of the current file and the line number in that file so that error * messages can be more meaningful. * * Interface: * Parse_Init Initialization function which must be * called before anything else in this module * is used. * * Parse_End Cleanup the module * * Parse_File Function used to parse a makefile. It must * be given the name of the file, which should * already have been opened, and a function * to call to read a character from the file. * * Parse_IsVar Returns TRUE if the given line is a * variable assignment. Used by MainParseArgs * to determine if an argument is a target * or a variable assignment. Used internally * for pretty much the same thing... * * Parse_Error Function called when an error occurs in * parsing. Used by the variable and * conditional modules. * Parse_MainName Returns a Lst of the main target to create. */ #include #include #include #include #include #include "make.h" #include "hash.h" #include "dir.h" #include "job.h" #include "buf.h" #include "pathnames.h" /* * These values are returned by ParseEOF to tell Parse_File whether to * CONTINUE parsing, i.e. it had only reached the end of an include file, * or if it's DONE. */ #define CONTINUE 1 #define DONE 0 static Lst targets; /* targets we're working on */ #ifdef CLEANUP static Lst targCmds; /* command lines for targets */ #endif static Boolean inLine; /* true if currently in a dependency * line or its commands */ static int fatals = 0; static GNode *mainNode; /* The main target to create. This is the * first target on the first dependency * line in the first makefile */ typedef struct IFile { const char *fname; /* name of file */ int lineno; /* current line number in file */ int first_lineno; /* line number of start of text */ int fd; /* the open file */ int cond_depth; /* 'if' nesting when file opened */ char *P_str; /* point to base of string buffer */ char *P_ptr; /* point to next char of string buffer */ char *P_end; /* point to the end of string buffer */ int P_buflen; /* current size of file buffer */ char *(*nextbuf)(void *); /* Function to get more data */ void *nextbuf_arg; /* Opaque arg for nextbuf() */ } IFile; #define IFILE_BUFLEN 0x8000 static IFile *curFile; /* * Definitions for handling #include specifications */ static Lst includes; /* stack of IFiles generated by .includes */ Lst parseIncPath; /* list of directories for "..." includes */ Lst sysIncPath; /* list of directories for <...> includes */ Lst defIncPath; /* default directories for <...> includes */ /*- * specType contains the SPECial TYPE of the current target. It is * Not if the target is unspecial. If it *is* special, however, the children * are linked as children of the parent but not vice versa. This variable is * set in ParseDoDependency */ typedef enum { Begin, /* .BEGIN */ Default, /* .DEFAULT */ End, /* .END */ Ignore, /* .IGNORE */ Includes, /* .INCLUDES */ Interrupt, /* .INTERRUPT */ Libs, /* .LIBS */ MFlags, /* .MFLAGS or .MAKEFLAGS */ Main, /* .MAIN and we don't have anything user-specified to * make */ NoExport, /* .NOEXPORT */ NoPath, /* .NOPATH */ Not, /* Not special */ NotParallel, /* .NOTPARALLEL */ Null, /* .NULL */ ExObjdir, /* .OBJDIR */ Order, /* .ORDER */ Parallel, /* .PARALLEL */ ExPath, /* .PATH */ Phony, /* .PHONY */ #ifdef POSIX Posix, /* .POSIX */ #endif Precious, /* .PRECIOUS */ ExShell, /* .SHELL */ Silent, /* .SILENT */ SingleShell, /* .SINGLESHELL */ Suffixes, /* .SUFFIXES */ Wait, /* .WAIT */ Attribute /* Generic attribute */ } ParseSpecial; static ParseSpecial specType; #define LPAREN '(' #define RPAREN ')' /* * Predecessor node for handling .ORDER. Initialized to NULL when .ORDER * seen, then set to each successive source on the line. */ static GNode *predecessor; /* * The parseKeywords table is searched using binary search when deciding * if a target or source is special. The 'spec' field is the ParseSpecial * type of the keyword ("Not" if the keyword isn't special as a target) while * the 'op' field is the operator to apply to the list of targets if the * keyword is used as a source ("0" if the keyword isn't special as a source) */ static struct { const char *name; /* Name of keyword */ ParseSpecial spec; /* Type when used as a target */ int op; /* Operator when used as a source */ } parseKeywords[] = { { ".BEGIN", Begin, 0 }, { ".DEFAULT", Default, 0 }, { ".END", End, 0 }, { ".EXEC", Attribute, OP_EXEC }, { ".IGNORE", Ignore, OP_IGNORE }, { ".INCLUDES", Includes, 0 }, { ".INTERRUPT", Interrupt, 0 }, { ".INVISIBLE", Attribute, OP_INVISIBLE }, { ".JOIN", Attribute, OP_JOIN }, { ".LIBS", Libs, 0 }, { ".MADE", Attribute, OP_MADE }, { ".MAIN", Main, 0 }, { ".MAKE", Attribute, OP_MAKE }, { ".MAKEFLAGS", MFlags, 0 }, { ".MFLAGS", MFlags, 0 }, { ".NOPATH", NoPath, OP_NOPATH }, { ".NOTMAIN", Attribute, OP_NOTMAIN }, { ".NOTPARALLEL", NotParallel, 0 }, { ".NO_PARALLEL", NotParallel, 0 }, { ".NULL", Null, 0 }, { ".OBJDIR", ExObjdir, 0 }, { ".OPTIONAL", Attribute, OP_OPTIONAL }, { ".ORDER", Order, 0 }, { ".PARALLEL", Parallel, 0 }, { ".PATH", ExPath, 0 }, { ".PHONY", Phony, OP_PHONY }, #ifdef POSIX { ".POSIX", Posix, 0 }, #endif { ".PRECIOUS", Precious, OP_PRECIOUS }, { ".RECURSIVE", Attribute, OP_MAKE }, { ".SHELL", ExShell, 0 }, { ".SILENT", Silent, OP_SILENT }, { ".SINGLESHELL", SingleShell, 0 }, { ".SUFFIXES", Suffixes, 0 }, { ".USE", Attribute, OP_USE }, { ".USEBEFORE", Attribute, OP_USEBEFORE }, { ".WAIT", Wait, 0 }, }; static int ParseIsEscaped(const char *, const char *); static void ParseErrorInternal(const char *, size_t, int, const char *, ...) __attribute__((__format__(__printf__, 4, 5))); static void ParseVErrorInternal(FILE *, const char *, size_t, int, const char *, va_list) __attribute__((__format__(__printf__, 5, 0))); static int ParseFindKeyword(const char *); static int ParseLinkSrc(void *, void *); static int ParseDoOp(void *, void *); static void ParseDoSrc(int, const char *); static int ParseFindMain(void *, void *); static int ParseAddDir(void *, void *); static int ParseClearPath(void *, void *); static void ParseDoDependency(char *); static int ParseAddCmd(void *, void *); static void ParseHasCommands(void *); static void ParseDoInclude(char *); static void ParseSetParseFile(const char *); #ifdef SYSVINCLUDE static void ParseTraditionalInclude(char *); #endif static int ParseEOF(void); static char *ParseReadLine(void); static void ParseFinishLine(void); static void ParseMark(GNode *); extern int maxJobs; /*- *---------------------------------------------------------------------- * ParseIsEscaped -- * Check if the current character is escaped on the current line * * Results: * 0 if the character is not backslash escaped, 1 otherwise * * Side Effects: * None *---------------------------------------------------------------------- */ static int ParseIsEscaped(const char *line, const char *c) { int active = 0; for (;;) { if (line == c) return active; if (*--c != '\\') return active; active = !active; } } /*- *---------------------------------------------------------------------- * ParseFindKeyword -- * Look in the table of keywords for one matching the given string. * * Input: * str String to find * * Results: * The index of the keyword, or -1 if it isn't there. * * Side Effects: * None *---------------------------------------------------------------------- */ static int ParseFindKeyword(const char *str) { int start, end, cur; int diff; start = 0; end = (sizeof(parseKeywords)/sizeof(parseKeywords[0])) - 1; do { cur = start + ((end - start) / 2); diff = strcmp(str, parseKeywords[cur].name); if (diff == 0) { return (cur); } else if (diff < 0) { end = cur - 1; } else { start = cur + 1; } } while (start <= end); return (-1); } /*- * ParseVErrorInternal -- * Error message abort function for parsing. Prints out the context * of the error (line number and file) as well as the message with * two optional arguments. * * Results: * None * * Side Effects: * "fatals" is incremented if the level is PARSE_FATAL. */ /* VARARGS */ static void ParseVErrorInternal(FILE *f, const char *cfname, size_t clineno, int type, const char *fmt, va_list ap) { static Boolean fatal_warning_error_printed = FALSE; (void)fprintf(f, "%s: ", progname); if (cfname != NULL) { (void)fprintf(f, "\""); if (*cfname != '/' && strcmp(cfname, "(stdin)") != 0) { char *cp; const char *dir; /* * Nothing is more anoying than not knowing * which Makefile is the culprit. */ dir = Var_Value(".PARSEDIR", VAR_GLOBAL, &cp); if (dir == NULL || *dir == '\0' || (*dir == '.' && dir[1] == '\0')) dir = Var_Value(".CURDIR", VAR_GLOBAL, &cp); if (dir == NULL) dir = "."; (void)fprintf(f, "%s/%s", dir, cfname); } else (void)fprintf(f, "%s", cfname); (void)fprintf(f, "\" line %d: ", (int)clineno); } if (type == PARSE_WARNING) (void)fprintf(f, "warning: "); (void)vfprintf(f, fmt, ap); (void)fprintf(f, "\n"); (void)fflush(f); if (type == PARSE_FATAL || parseWarnFatal) fatals += 1; if (parseWarnFatal && !fatal_warning_error_printed) { Error("parsing warnings being treated as errors"); fatal_warning_error_printed = TRUE; } } /*- * ParseErrorInternal -- * Error function * * Results: * None * * Side Effects: * None */ /* VARARGS */ static void ParseErrorInternal(const char *cfname, size_t clineno, int type, const char *fmt, ...) { va_list ap; va_start(ap, fmt); ParseVErrorInternal(stderr, cfname, clineno, type, fmt, ap); va_end(ap); if (debug_file != stderr && debug_file != stdout) { va_start(ap, fmt); ParseVErrorInternal(debug_file, cfname, clineno, type, fmt, ap); va_end(ap); } } /*- * Parse_Error -- * External interface to ParseErrorInternal; uses the default filename * Line number. * * Results: * None * * Side Effects: * None */ /* VARARGS */ void Parse_Error(int type, const char *fmt, ...) { va_list ap; const char *fname; size_t lineno; if (curFile == NULL) { fname = NULL; lineno = 0; } else { fname = curFile->fname; lineno = curFile->lineno; } va_start(ap, fmt); ParseVErrorInternal(stderr, fname, lineno, type, fmt, ap); va_end(ap); if (debug_file != stderr && debug_file != stdout) { va_start(ap, fmt); ParseVErrorInternal(debug_file, fname, lineno, type, fmt, ap); va_end(ap); } } /*- *--------------------------------------------------------------------- * ParseLinkSrc -- * Link the parent node to its new child. Used in a Lst_ForEach by * ParseDoDependency. If the specType isn't 'Not', the parent * isn't linked as a parent of the child. * * Input: * pgnp The parent node * cgpn The child node * * Results: * Always = 0 * * Side Effects: * New elements are added to the parents list of cgn and the * children list of cgn. the unmade field of pgn is updated * to reflect the additional child. *--------------------------------------------------------------------- */ static int ParseLinkSrc(void *pgnp, void *cgnp) { GNode *pgn = (GNode *)pgnp; GNode *cgn = (GNode *)cgnp; if ((pgn->type & OP_DOUBLEDEP) && !Lst_IsEmpty (pgn->cohorts)) pgn = (GNode *)Lst_Datum(Lst_Last(pgn->cohorts)); (void)Lst_AtEnd(pgn->children, cgn); if (specType == Not) (void)Lst_AtEnd(cgn->parents, pgn); pgn->unmade += 1; if (DEBUG(PARSE)) { fprintf(debug_file, "# ParseLinkSrc: added child %s - %s\n", pgn->name, cgn->name); Targ_PrintNode(pgn, 0); Targ_PrintNode(cgn, 0); } return (0); } /*- *--------------------------------------------------------------------- * ParseDoOp -- * Apply the parsed operator to the given target node. Used in a * Lst_ForEach call by ParseDoDependency once all targets have * been found and their operator parsed. If the previous and new * operators are incompatible, a major error is taken. * * Input: * gnp The node to which the operator is to be applied * opp The operator to apply * * Results: * Always 0 * * Side Effects: * The type field of the node is altered to reflect any new bits in * the op. *--------------------------------------------------------------------- */ static int ParseDoOp(void *gnp, void *opp) { GNode *gn = (GNode *)gnp; int op = *(int *)opp; /* * If the dependency mask of the operator and the node don't match and * the node has actually had an operator applied to it before, and * the operator actually has some dependency information in it, complain. */ if (((op & OP_OPMASK) != (gn->type & OP_OPMASK)) && !OP_NOP(gn->type) && !OP_NOP(op)) { Parse_Error(PARSE_FATAL, "Inconsistent operator for %s", gn->name); return (1); } if ((op == OP_DOUBLEDEP) && ((gn->type & OP_OPMASK) == OP_DOUBLEDEP)) { /* * If the node was the object of a :: operator, we need to create a * new instance of it for the children and commands on this dependency * line. The new instance is placed on the 'cohorts' list of the * initial one (note the initial one is not on its own cohorts list) * and the new instance is linked to all parents of the initial * instance. */ GNode *cohort; /* * Propagate copied bits to the initial node. They'll be propagated * back to the rest of the cohorts later. */ gn->type |= op & ~OP_OPMASK; cohort = Targ_FindNode(gn->name, TARG_NOHASH); /* * Make the cohort invisible as well to avoid duplicating it into * other variables. True, parents of this target won't tend to do * anything with their local variables, but better safe than * sorry. (I think this is pointless now, since the relevant list * traversals will no longer see this node anyway. -mycroft) */ cohort->type = op | OP_INVISIBLE; (void)Lst_AtEnd(gn->cohorts, cohort); cohort->centurion = gn; gn->unmade_cohorts += 1; snprintf(cohort->cohort_num, sizeof cohort->cohort_num, "#%d", gn->unmade_cohorts); } else { /* * We don't want to nuke any previous flags (whatever they were) so we * just OR the new operator into the old */ gn->type |= op; } return (0); } /*- *--------------------------------------------------------------------- * ParseDoSrc -- * Given the name of a source, figure out if it is an attribute * and apply it to the targets if it is. Else decide if there is * some attribute which should be applied *to* the source because * of some special target and apply it if so. Otherwise, make the * source be a child of the targets in the list 'targets' * * Input: * tOp operator (if any) from special targets * src name of the source to handle * * Results: * None * * Side Effects: * Operator bits may be added to the list of targets or to the source. * The targets may have a new source added to their lists of children. *--------------------------------------------------------------------- */ static void ParseDoSrc(int tOp, const char *src) { GNode *gn = NULL; static int wait_number = 0; char wait_src[16]; if (*src == '.' && isupper ((unsigned char)src[1])) { int keywd = ParseFindKeyword(src); if (keywd != -1) { int op = parseKeywords[keywd].op; if (op != 0) { Lst_ForEach(targets, ParseDoOp, &op); return; } if (parseKeywords[keywd].spec == Wait) { /* * We add a .WAIT node in the dependency list. * After any dynamic dependencies (and filename globbing) * have happened, it is given a dependency on the each * previous child back to and previous .WAIT node. * The next child won't be scheduled until the .WAIT node * is built. * We give each .WAIT node a unique name (mainly for diag). */ snprintf(wait_src, sizeof wait_src, ".WAIT_%u", ++wait_number); gn = Targ_FindNode(wait_src, TARG_NOHASH); gn->type = OP_WAIT | OP_PHONY | OP_DEPENDS | OP_NOTMAIN; Lst_ForEach(targets, ParseLinkSrc, gn); return; } } } switch (specType) { case Main: /* * If we have noted the existence of a .MAIN, it means we need * to add the sources of said target to the list of things * to create. The string 'src' is likely to be free, so we * must make a new copy of it. Note that this will only be * invoked if the user didn't specify a target on the command * line. This is to allow #ifmake's to succeed, or something... */ (void)Lst_AtEnd(create, bmake_strdup(src)); /* * Add the name to the .TARGETS variable as well, so the user can * employ that, if desired. */ Var_Append(".TARGETS", src, VAR_GLOBAL); return; case Order: /* * Create proper predecessor/successor links between the previous * source and the current one. */ gn = Targ_FindNode(src, TARG_CREATE); if (predecessor != NULL) { (void)Lst_AtEnd(predecessor->order_succ, gn); (void)Lst_AtEnd(gn->order_pred, predecessor); if (DEBUG(PARSE)) { fprintf(debug_file, "# ParseDoSrc: added Order dependency %s - %s\n", predecessor->name, gn->name); Targ_PrintNode(predecessor, 0); Targ_PrintNode(gn, 0); } } /* * The current source now becomes the predecessor for the next one. */ predecessor = gn; break; default: /* * If the source is not an attribute, we need to find/create * a node for it. After that we can apply any operator to it * from a special target or link it to its parents, as * appropriate. * * In the case of a source that was the object of a :: operator, * the attribute is applied to all of its instances (as kept in * the 'cohorts' list of the node) or all the cohorts are linked * to all the targets. */ /* Find/create the 'src' node and attach to all targets */ gn = Targ_FindNode(src, TARG_CREATE); if (tOp) { gn->type |= tOp; } else { Lst_ForEach(targets, ParseLinkSrc, gn); } break; } } /*- *----------------------------------------------------------------------- * ParseFindMain -- * Find a real target in the list and set it to be the main one. * Called by ParseDoDependency when a main target hasn't been found * yet. * * Input: * gnp Node to examine * * Results: * 0 if main not found yet, 1 if it is. * * Side Effects: * mainNode is changed and Targ_SetMain is called. * *----------------------------------------------------------------------- */ static int ParseFindMain(void *gnp, void *dummy) { GNode *gn = (GNode *)gnp; if ((gn->type & OP_NOTARGET) == 0) { mainNode = gn; Targ_SetMain(gn); return (dummy ? 1 : 1); } else { return (dummy ? 0 : 0); } } /*- *----------------------------------------------------------------------- * ParseAddDir -- * Front-end for Dir_AddDir to make sure Lst_ForEach keeps going * * Results: * === 0 * * Side Effects: * See Dir_AddDir. * *----------------------------------------------------------------------- */ static int ParseAddDir(void *path, void *name) { (void)Dir_AddDir((Lst) path, (char *)name); return(0); } /*- *----------------------------------------------------------------------- * ParseClearPath -- * Front-end for Dir_ClearPath to make sure Lst_ForEach keeps going * * Results: * === 0 * * Side Effects: * See Dir_ClearPath * *----------------------------------------------------------------------- */ static int ParseClearPath(void *path, void *dummy) { Dir_ClearPath((Lst) path); return(dummy ? 0 : 0); } /*- *--------------------------------------------------------------------- * ParseDoDependency -- * Parse the dependency line in line. * * Input: * line the line to parse * * Results: * None * * Side Effects: * The nodes of the sources are linked as children to the nodes of the * targets. Some nodes may be created. * * We parse a dependency line by first extracting words from the line and * finding nodes in the list of all targets with that name. This is done * until a character is encountered which is an operator character. Currently * these are only ! and :. At this point the operator is parsed and the * pointer into the line advanced until the first source is encountered. * The parsed operator is applied to each node in the 'targets' list, * which is where the nodes found for the targets are kept, by means of * the ParseDoOp function. * The sources are read in much the same way as the targets were except * that now they are expanded using the wildcarding scheme of the C-Shell * and all instances of the resulting words in the list of all targets * are found. Each of the resulting nodes is then linked to each of the * targets as one of its children. * Certain targets are handled specially. These are the ones detailed * by the specType variable. * The storing of transformation rules is also taken care of here. * A target is recognized as a transformation rule by calling * Suff_IsTransform. If it is a transformation rule, its node is gotten * from the suffix module via Suff_AddTransform rather than the standard * Targ_FindNode in the target module. *--------------------------------------------------------------------- */ static void ParseDoDependency(char *line) { char *cp; /* our current position */ GNode *gn = NULL; /* a general purpose temporary node */ int op; /* the operator on the line */ char savec; /* a place to save a character */ Lst paths; /* List of search paths to alter when parsing * a list of .PATH targets */ int tOp; /* operator from special target */ Lst sources; /* list of archive source names after * expansion */ Lst curTargs; /* list of target names to be found and added * to the targets list */ char *lstart = line; if (DEBUG(PARSE)) fprintf(debug_file, "ParseDoDependency(%s)\n", line); tOp = 0; specType = Not; paths = (Lst)NULL; curTargs = Lst_Init(FALSE); do { for (cp = line; *cp && (ParseIsEscaped(lstart, cp) || !(isspace((unsigned char)*cp) || *cp == '!' || *cp == ':' || *cp == LPAREN)); cp++) { if (*cp == '$') { /* * Must be a dynamic source (would have been expanded * otherwise), so call the Var module to parse the puppy * so we can safely advance beyond it...There should be * no errors in this, as they would have been discovered * in the initial Var_Subst and we wouldn't be here. */ int length; void *freeIt; char *result; result = Var_Parse(cp, VAR_CMD, TRUE, &length, &freeIt); if (freeIt) free(freeIt); cp += length-1; } } if (!ParseIsEscaped(lstart, cp) && *cp == LPAREN) { /* * Archives must be handled specially to make sure the OP_ARCHV * flag is set in their 'type' field, for one thing, and because * things like "archive(file1.o file2.o file3.o)" are permissible. * Arch_ParseArchive will set 'line' to be the first non-blank * after the archive-spec. It creates/finds nodes for the members * and places them on the given list, returning SUCCESS if all * went well and FAILURE if there was an error in the * specification. On error, line should remain untouched. */ if (Arch_ParseArchive(&line, targets, VAR_CMD) != SUCCESS) { Parse_Error(PARSE_FATAL, "Error in archive specification: \"%s\"", line); goto out; } else { continue; } } savec = *cp; if (!*cp) { /* * Ending a dependency line without an operator is a Bozo * no-no. As a heuristic, this is also often triggered by * undetected conflicts from cvs/rcs merges. */ if ((strncmp(line, "<<<<<<", 6) == 0) || (strncmp(line, "======", 6) == 0) || (strncmp(line, ">>>>>>", 6) == 0)) Parse_Error(PARSE_FATAL, "Makefile appears to contain unresolved cvs/rcs/??? merge conflicts"); else Parse_Error(PARSE_FATAL, lstart[0] == '.' ? "Unknown directive" : "Need an operator"); goto out; } *cp = '\0'; /* * Have a word in line. See if it's a special target and set * specType to match it. */ if (*line == '.' && isupper ((unsigned char)line[1])) { /* * See if the target is a special target that must have it * or its sources handled specially. */ int keywd = ParseFindKeyword(line); if (keywd != -1) { if (specType == ExPath && parseKeywords[keywd].spec != ExPath) { Parse_Error(PARSE_FATAL, "Mismatched special targets"); goto out; } specType = parseKeywords[keywd].spec; tOp = parseKeywords[keywd].op; /* * Certain special targets have special semantics: * .PATH Have to set the dirSearchPath * variable too * .MAIN Its sources are only used if * nothing has been specified to * create. * .DEFAULT Need to create a node to hang * commands on, but we don't want * it in the graph, nor do we want * it to be the Main Target, so we * create it, set OP_NOTMAIN and * add it to the list, setting * DEFAULT to the new node for * later use. We claim the node is * A transformation rule to make * life easier later, when we'll * use Make_HandleUse to actually * apply the .DEFAULT commands. * .PHONY The list of targets * .NOPATH Don't search for file in the path * .BEGIN * .END * .INTERRUPT Are not to be considered the * main target. * .NOTPARALLEL Make only one target at a time. * .SINGLESHELL Create a shell for each command. * .ORDER Must set initial predecessor to NULL */ switch (specType) { case ExPath: if (paths == NULL) { paths = Lst_Init(FALSE); } (void)Lst_AtEnd(paths, dirSearchPath); break; case Main: if (!Lst_IsEmpty(create)) { specType = Not; } break; case Begin: case End: case Interrupt: gn = Targ_FindNode(line, TARG_CREATE); gn->type |= OP_NOTMAIN|OP_SPECIAL; (void)Lst_AtEnd(targets, gn); break; case Default: gn = Targ_NewGN(".DEFAULT"); gn->type |= (OP_NOTMAIN|OP_TRANSFORM); (void)Lst_AtEnd(targets, gn); DEFAULT = gn; break; case NotParallel: maxJobs = 1; break; case SingleShell: compatMake = TRUE; break; case Order: predecessor = NULL; break; default: break; } } else if (strncmp(line, ".PATH", 5) == 0) { /* * .PATH has to be handled specially. * Call on the suffix module to give us a path to * modify. */ Lst path; specType = ExPath; path = Suff_GetPath(&line[5]); if (path == NULL) { Parse_Error(PARSE_FATAL, "Suffix '%s' not defined (yet)", &line[5]); goto out; } else { if (paths == (Lst)NULL) { paths = Lst_Init(FALSE); } (void)Lst_AtEnd(paths, path); } } } /* * Have word in line. Get or create its node and stick it at * the end of the targets list */ if ((specType == Not) && (*line != '\0')) { if (Dir_HasWildcards(line)) { /* * Targets are to be sought only in the current directory, * so create an empty path for the thing. Note we need to * use Dir_Destroy in the destruction of the path as the * Dir module could have added a directory to the path... */ Lst emptyPath = Lst_Init(FALSE); Dir_Expand(line, emptyPath, curTargs); Lst_Destroy(emptyPath, Dir_Destroy); } else { /* * No wildcards, but we want to avoid code duplication, * so create a list with the word on it. */ (void)Lst_AtEnd(curTargs, line); } while(!Lst_IsEmpty(curTargs)) { char *targName = (char *)Lst_DeQueue(curTargs); if (!Suff_IsTransform (targName)) { gn = Targ_FindNode(targName, TARG_CREATE); } else { gn = Suff_AddTransform(targName); } (void)Lst_AtEnd(targets, gn); } } else if (specType == ExPath && *line != '.' && *line != '\0') { Parse_Error(PARSE_WARNING, "Extra target (%s) ignored", line); } *cp = savec; /* * If it is a special type and not .PATH, it's the only target we * allow on this line... */ if (specType != Not && specType != ExPath) { Boolean warning = FALSE; while (*cp && (ParseIsEscaped(lstart, cp) || ((*cp != '!') && (*cp != ':')))) { if (ParseIsEscaped(lstart, cp) || (*cp != ' ' && *cp != '\t')) { warning = TRUE; } cp++; } if (warning) { Parse_Error(PARSE_WARNING, "Extra target ignored"); } } else { while (*cp && isspace ((unsigned char)*cp)) { cp++; } } line = cp; } while (*line && (ParseIsEscaped(lstart, line) || ((*line != '!') && (*line != ':')))); /* * Don't need the list of target names anymore... */ Lst_Destroy(curTargs, NULL); curTargs = NULL; if (!Lst_IsEmpty(targets)) { switch(specType) { default: Parse_Error(PARSE_WARNING, "Special and mundane targets don't mix. Mundane ones ignored"); break; case Default: case Begin: case End: case Interrupt: /* * These four create nodes on which to hang commands, so * targets shouldn't be empty... */ case Not: /* * Nothing special here -- targets can be empty if it wants. */ break; } } /* * Have now parsed all the target names. Must parse the operator next. The * result is left in op . */ if (*cp == '!') { op = OP_FORCE; } else if (*cp == ':') { if (cp[1] == ':') { op = OP_DOUBLEDEP; cp++; } else { op = OP_DEPENDS; } } else { Parse_Error(PARSE_FATAL, lstart[0] == '.' ? "Unknown directive" : "Missing dependency operator"); goto out; } cp++; /* Advance beyond operator */ Lst_ForEach(targets, ParseDoOp, &op); /* * Get to the first source */ while (*cp && isspace ((unsigned char)*cp)) { cp++; } line = cp; /* * Several special targets take different actions if present with no * sources: * a .SUFFIXES line with no sources clears out all old suffixes * a .PRECIOUS line makes all targets precious * a .IGNORE line ignores errors for all targets * a .SILENT line creates silence when making all targets * a .PATH removes all directories from the search path(s). */ if (!*line) { switch (specType) { case Suffixes: Suff_ClearSuffixes(); break; case Precious: allPrecious = TRUE; break; case Ignore: ignoreErrors = TRUE; break; case Silent: beSilent = TRUE; break; case ExPath: Lst_ForEach(paths, ParseClearPath, NULL); Dir_SetPATH(); break; #ifdef POSIX case Posix: Var_Set("%POSIX", "1003.2", VAR_GLOBAL, 0); break; #endif default: break; } } else if (specType == MFlags) { /* * Call on functions in main.c to deal with these arguments and * set the initial character to a null-character so the loop to * get sources won't get anything */ Main_ParseArgLine(line); *line = '\0'; } else if (specType == ExShell) { if (Job_ParseShell(line) != SUCCESS) { Parse_Error(PARSE_FATAL, "improper shell specification"); goto out; } *line = '\0'; } else if ((specType == NotParallel) || (specType == SingleShell)) { *line = '\0'; } /* * NOW GO FOR THE SOURCES */ if ((specType == Suffixes) || (specType == ExPath) || (specType == Includes) || (specType == Libs) || (specType == Null) || (specType == ExObjdir)) { while (*line) { /* * If the target was one that doesn't take files as its sources * but takes something like suffixes, we take each * space-separated word on the line as a something and deal * with it accordingly. * * If the target was .SUFFIXES, we take each source as a * suffix and add it to the list of suffixes maintained by the * Suff module. * * If the target was a .PATH, we add the source as a directory * to search on the search path. * * If it was .INCLUDES, the source is taken to be the suffix of * files which will be #included and whose search path should * be present in the .INCLUDES variable. * * If it was .LIBS, the source is taken to be the suffix of * files which are considered libraries and whose search path * should be present in the .LIBS variable. * * If it was .NULL, the source is the suffix to use when a file * has no valid suffix. * * If it was .OBJDIR, the source is a new definition for .OBJDIR, * and will cause make to do a new chdir to that path. */ while (*cp && !isspace ((unsigned char)*cp)) { cp++; } savec = *cp; *cp = '\0'; switch (specType) { case Suffixes: Suff_AddSuffix(line, &mainNode); break; case ExPath: Lst_ForEach(paths, ParseAddDir, line); break; case Includes: Suff_AddInclude(line); break; case Libs: Suff_AddLib(line); break; case Null: Suff_SetNull(line); break; case ExObjdir: Main_SetObjdir(line); break; default: break; } *cp = savec; if (savec != '\0') { cp++; } while (*cp && isspace ((unsigned char)*cp)) { cp++; } line = cp; } if (paths) { Lst_Destroy(paths, NULL); } if (specType == ExPath) Dir_SetPATH(); } else { while (*line) { /* * The targets take real sources, so we must beware of archive * specifications (i.e. things with left parentheses in them) * and handle them accordingly. */ for (; *cp && !isspace ((unsigned char)*cp); cp++) { if ((*cp == LPAREN) && (cp > line) && (cp[-1] != '$')) { /* * Only stop for a left parenthesis if it isn't at the * start of a word (that'll be for variable changes * later) and isn't preceded by a dollar sign (a dynamic * source). */ break; } } if (*cp == LPAREN) { sources = Lst_Init(FALSE); if (Arch_ParseArchive(&line, sources, VAR_CMD) != SUCCESS) { Parse_Error(PARSE_FATAL, "Error in source archive spec \"%s\"", line); goto out; } while (!Lst_IsEmpty (sources)) { gn = (GNode *)Lst_DeQueue(sources); ParseDoSrc(tOp, gn->name); } Lst_Destroy(sources, NULL); cp = line; } else { if (*cp) { *cp = '\0'; cp += 1; } ParseDoSrc(tOp, line); } while (*cp && isspace ((unsigned char)*cp)) { cp++; } line = cp; } } if (mainNode == NULL) { /* * If we have yet to decide on a main target to make, in the * absence of any user input, we want the first target on * the first dependency line that is actually a real target * (i.e. isn't a .USE or .EXEC rule) to be made. */ Lst_ForEach(targets, ParseFindMain, NULL); } out: if (curTargs) Lst_Destroy(curTargs, NULL); } /*- *--------------------------------------------------------------------- * Parse_IsVar -- * Return TRUE if the passed line is a variable assignment. A variable * assignment consists of a single word followed by optional whitespace * followed by either a += or an = operator. * This function is used both by the Parse_File function and main when * parsing the command-line arguments. * * Input: * line the line to check * * Results: * TRUE if it is. FALSE if it ain't * * Side Effects: * none *--------------------------------------------------------------------- */ Boolean Parse_IsVar(char *line) { Boolean wasSpace = FALSE; /* set TRUE if found a space */ char ch; int level = 0; #define ISEQOPERATOR(c) \ (((c) == '+') || ((c) == ':') || ((c) == '?') || ((c) == '!')) /* * Skip to variable name */ for (;(*line == ' ') || (*line == '\t'); line++) continue; /* Scan for one of the assignment operators outside a variable expansion */ while ((ch = *line++) != 0) { if (ch == '(' || ch == '{') { level++; continue; } if (ch == ')' || ch == '}') { level--; continue; } if (level != 0) continue; while (ch == ' ' || ch == '\t') { ch = *line++; wasSpace = TRUE; } if (ch == '=') return TRUE; if (*line == '=' && ISEQOPERATOR(ch)) return TRUE; if (wasSpace) return FALSE; } return FALSE; } /*- *--------------------------------------------------------------------- * Parse_DoVar -- * Take the variable assignment in the passed line and do it in the * global context. * * Note: There is a lexical ambiguity with assignment modifier characters * in variable names. This routine interprets the character before the = * as a modifier. Therefore, an assignment like * C++=/usr/bin/CC * is interpreted as "C+ +=" instead of "C++ =". * * Input: * line a line guaranteed to be a variable assignment. * This reduces error checks * ctxt Context in which to do the assignment * * Results: * none * * Side Effects: * the variable structure of the given variable name is altered in the * global context. *--------------------------------------------------------------------- */ void Parse_DoVar(char *line, GNode *ctxt) { char *cp; /* pointer into line */ enum { VAR_SUBST, VAR_APPEND, VAR_SHELL, VAR_NORMAL } type; /* Type of assignment */ char *opc; /* ptr to operator character to * null-terminate the variable name */ Boolean freeCp = FALSE; /* TRUE if cp needs to be freed, * i.e. if any variable expansion was * performed */ int depth; /* * Skip to variable name */ while ((*line == ' ') || (*line == '\t')) { line++; } /* * Skip to operator character, nulling out whitespace as we go * XXX Rather than counting () and {} we should look for $ and * then expand the variable. */ for (depth = 0, cp = line + 1; depth != 0 || *cp != '='; cp++) { if (*cp == '(' || *cp == '{') { depth++; continue; } if (*cp == ')' || *cp == '}') { depth--; continue; } if (depth == 0 && isspace ((unsigned char)*cp)) { *cp = '\0'; } } opc = cp-1; /* operator is the previous character */ *cp++ = '\0'; /* nuke the = */ /* * Check operator type */ switch (*opc) { case '+': type = VAR_APPEND; *opc = '\0'; break; case '?': /* * If the variable already has a value, we don't do anything. */ *opc = '\0'; if (Var_Exists(line, ctxt)) { return; } else { type = VAR_NORMAL; } break; case ':': type = VAR_SUBST; *opc = '\0'; break; case '!': type = VAR_SHELL; *opc = '\0'; break; default: #ifdef SUNSHCMD while (opc > line && *opc != ':') opc--; if (strncmp(opc, ":sh", 3) == 0) { type = VAR_SHELL; *opc = '\0'; break; } #endif type = VAR_NORMAL; break; } while (isspace ((unsigned char)*cp)) { cp++; } if (type == VAR_APPEND) { Var_Append(line, cp, ctxt); } else if (type == VAR_SUBST) { /* * Allow variables in the old value to be undefined, but leave their * invocation alone -- this is done by forcing oldVars to be false. * XXX: This can cause recursive variables, but that's not hard to do, * and this allows someone to do something like * * CFLAGS = $(.INCLUDES) * CFLAGS := -I.. $(CFLAGS) * * And not get an error. */ Boolean oldOldVars = oldVars; oldVars = FALSE; /* * make sure that we set the variable the first time to nothing * so that it gets substituted! */ if (!Var_Exists(line, ctxt)) Var_Set(line, "", ctxt, 0); cp = Var_Subst(NULL, cp, ctxt, FALSE); oldVars = oldOldVars; freeCp = TRUE; Var_Set(line, cp, ctxt, 0); } else if (type == VAR_SHELL) { char *res; const char *error; if (strchr(cp, '$') != NULL) { /* * There's a dollar sign in the command, so perform variable * expansion on the whole thing. The resulting string will need * freeing when we're done, so set freeCmd to TRUE. */ cp = Var_Subst(NULL, cp, VAR_CMD, TRUE); freeCp = TRUE; } res = Cmd_Exec(cp, &error); Var_Set(line, res, ctxt, 0); free(res); if (error) Parse_Error(PARSE_WARNING, error, cp); } else { /* * Normal assignment -- just do it. */ Var_Set(line, cp, ctxt, 0); } if (strcmp(line, MAKEOVERRIDES) == 0) Main_ExportMAKEFLAGS(FALSE); /* re-export MAKEFLAGS */ else if (strcmp(line, ".CURDIR") == 0) { /* * Somone is being (too?) clever... * Let's pretend they know what they are doing and * re-initialize the 'cur' Path. */ Dir_InitCur(cp); Dir_SetPATH(); } else if (strcmp(line, MAKE_JOB_PREFIX) == 0) { Job_SetPrefix(); } else if (strcmp(line, MAKE_EXPORTED) == 0) { Var_Export(cp, 0); } if (freeCp) free(cp); } /*- * ParseAddCmd -- * Lst_ForEach function to add a command line to all targets * * Input: * gnp the node to which the command is to be added * cmd the command to add * * Results: * Always 0 * * Side Effects: * A new element is added to the commands list of the node. */ static int ParseAddCmd(void *gnp, void *cmd) { GNode *gn = (GNode *)gnp; /* Add to last (ie current) cohort for :: targets */ if ((gn->type & OP_DOUBLEDEP) && !Lst_IsEmpty (gn->cohorts)) gn = (GNode *)Lst_Datum(Lst_Last(gn->cohorts)); /* if target already supplied, ignore commands */ if (!(gn->type & OP_HAS_COMMANDS)) { (void)Lst_AtEnd(gn->commands, cmd); ParseMark(gn); } else { #ifdef notyet /* XXX: We cannot do this until we fix the tree */ (void)Lst_AtEnd(gn->commands, cmd); Parse_Error(PARSE_WARNING, "overriding commands for target \"%s\"; " "previous commands defined at %s: %d ignored", gn->name, gn->fname, gn->lineno); #else Parse_Error(PARSE_WARNING, "duplicate script for target \"%s\" ignored", gn->name); ParseErrorInternal(gn->fname, gn->lineno, PARSE_WARNING, "using previous script for \"%s\" defined here", gn->name); #endif } return(0); } /*- *----------------------------------------------------------------------- * ParseHasCommands -- * Callback procedure for Parse_File when destroying the list of * targets on the last dependency line. Marks a target as already * having commands if it does, to keep from having shell commands * on multiple dependency lines. * * Input: * gnp Node to examine * * Results: * None * * Side Effects: * OP_HAS_COMMANDS may be set for the target. * *----------------------------------------------------------------------- */ static void ParseHasCommands(void *gnp) { GNode *gn = (GNode *)gnp; if (!Lst_IsEmpty(gn->commands)) { gn->type |= OP_HAS_COMMANDS; } } /*- *----------------------------------------------------------------------- * Parse_AddIncludeDir -- * Add a directory to the path searched for included makefiles * bracketed by double-quotes. Used by functions in main.c * * Input: * dir The name of the directory to add * * Results: * None. * * Side Effects: * The directory is appended to the list. * *----------------------------------------------------------------------- */ void Parse_AddIncludeDir(char *dir) { (void)Dir_AddDir(parseIncPath, dir); } /*- *--------------------------------------------------------------------- * ParseDoInclude -- * Push to another file. * * The input is the line minus the `.'. A file spec is a string * enclosed in <> or "". The former is looked for only in sysIncPath. * The latter in . and the directories specified by -I command line * options * * Results: * None * * Side Effects: * A structure is added to the includes Lst and readProc, lineno, * fname and curFILE are altered for the new file *--------------------------------------------------------------------- */ static void Parse_include_file(char *file, Boolean isSystem, int silent) { char *fullname; /* full pathname of file */ char *newName; char *prefEnd, *incdir; int fd; int i; /* * Now we know the file's name and its search path, we attempt to * find the durn thing. A return of NULL indicates the file don't * exist. */ fullname = file[0] == '/' ? bmake_strdup(file) : NULL; if (fullname == NULL && !isSystem) { /* * Include files contained in double-quotes are first searched for * relative to the including file's location. We don't want to * cd there, of course, so we just tack on the old file's * leading path components and call Dir_FindFile to see if * we can locate the beast. */ incdir = bmake_strdup(curFile->fname); prefEnd = strrchr(incdir, '/'); if (prefEnd != NULL) { *prefEnd = '\0'; /* Now do lexical processing of leading "../" on the filename */ for (i = 0; strncmp(file + i, "../", 3) == 0; i += 3) { prefEnd = strrchr(incdir + 1, '/'); if (prefEnd == NULL || strcmp(prefEnd, "/..") == 0) break; *prefEnd = '\0'; } newName = str_concat(incdir, file + i, STR_ADDSLASH); fullname = Dir_FindFile(newName, parseIncPath); if (fullname == NULL) fullname = Dir_FindFile(newName, dirSearchPath); free(newName); } free(incdir); if (fullname == NULL) { /* * Makefile wasn't found in same directory as included makefile. * Search for it first on the -I search path, * then on the .PATH search path, if not found in a -I directory. * If we have a suffix specific path we should use that. */ char *suff; Lst suffPath = NULL; if ((suff = strrchr(file, '.'))) { suffPath = Suff_GetPath(suff); if (suffPath != NULL) { fullname = Dir_FindFile(file, suffPath); } } if (fullname == NULL) { fullname = Dir_FindFile(file, parseIncPath); if (fullname == NULL) { fullname = Dir_FindFile(file, dirSearchPath); } } } } /* Looking for a system file or file still not found */ if (fullname == NULL) { /* * Look for it on the system path */ fullname = Dir_FindFile(file, Lst_IsEmpty(sysIncPath) ? defIncPath : sysIncPath); } if (fullname == NULL) { if (!silent) Parse_Error(PARSE_FATAL, "Could not find %s", file); return; } /* Actually open the file... */ fd = open(fullname, O_RDONLY); if (fd == -1) { if (!silent) Parse_Error(PARSE_FATAL, "Cannot open %s", fullname); free(fullname); return; } /* Start reading from this file next */ Parse_SetInput(fullname, 0, fd, NULL, NULL); } static void ParseDoInclude(char *line) { char endc; /* the character which ends the file spec */ char *cp; /* current position in file spec */ int silent = (*line != 'i') ? 1 : 0; char *file = &line[7 + silent]; /* Skip to delimiter character so we know where to look */ while (*file == ' ' || *file == '\t') file++; if (*file != '"' && *file != '<') { Parse_Error(PARSE_FATAL, ".include filename must be delimited by '\"' or '<'"); return; } /* * Set the search path on which to find the include file based on the * characters which bracket its name. Angle-brackets imply it's * a system Makefile while double-quotes imply it's a user makefile */ if (*file == '<') { endc = '>'; } else { endc = '"'; } /* Skip to matching delimiter */ for (cp = ++file; *cp && *cp != endc; cp++) continue; if (*cp != endc) { Parse_Error(PARSE_FATAL, "Unclosed %cinclude filename. '%c' expected", '.', endc); return; } *cp = '\0'; /* * Substitute for any variables in the file name before trying to * find the thing. */ file = Var_Subst(NULL, file, VAR_CMD, FALSE); Parse_include_file(file, endc == '>', silent); free(file); } /*- *--------------------------------------------------------------------- * ParseSetParseFile -- * Set the .PARSEDIR and .PARSEFILE variables to the dirname and * basename of the given filename * * Results: * None * * Side Effects: * The .PARSEDIR and .PARSEFILE variables are overwritten by the * dirname and basename of the given filename. *--------------------------------------------------------------------- */ static void ParseSetParseFile(const char *filename) { char *slash; char *dirname; int len; slash = strrchr(filename, '/'); if (slash == NULL) { Var_Set(".PARSEDIR", ".", VAR_GLOBAL, 0); Var_Set(".PARSEFILE", filename, VAR_GLOBAL, 0); } else { len = slash - filename; dirname = bmake_malloc(len + 1); memcpy(dirname, filename, len); dirname[len] = 0; Var_Set(".PARSEDIR", dirname, VAR_GLOBAL, 0); Var_Set(".PARSEFILE", slash+1, VAR_GLOBAL, 0); free(dirname); } } /* * Track the makefiles we read - so makefiles can * set dependencies on them. * Avoid adding anything more than once. */ static void ParseTrackInput(const char *name) { char *old; char *fp = NULL; size_t name_len = strlen(name); old = Var_Value(MAKE_MAKEFILES, VAR_GLOBAL, &fp); if (old) { /* does it contain name? */ for (; old != NULL; old = strchr(old, ' ')) { if (*old == ' ') old++; if (memcmp(old, name, name_len) == 0 && (old[name_len] == 0 || old[name_len] == ' ')) goto cleanup; } } Var_Append (MAKE_MAKEFILES, name, VAR_GLOBAL); cleanup: if (fp) { free(fp); } } /*- *--------------------------------------------------------------------- * Parse_setInput -- * Start Parsing from the given source * * Results: * None * * Side Effects: * A structure is added to the includes Lst and readProc, lineno, * fname and curFile are altered for the new file *--------------------------------------------------------------------- */ void Parse_SetInput(const char *name, int line, int fd, char *(*nextbuf)(void *), void *arg) { char *buf; if (name == NULL) name = curFile->fname; else ParseTrackInput(name); if (DEBUG(PARSE)) fprintf(debug_file, "Parse_SetInput: file %s, line %d, fd %d, nextbuf %p, arg %p\n", name, line, fd, nextbuf, arg); if (fd == -1 && nextbuf == NULL) /* sanity */ return; if (curFile != NULL) /* Save exiting file info */ Lst_AtFront(includes, curFile); /* Allocate and fill in new structure */ curFile = bmake_malloc(sizeof *curFile); /* * Once the previous state has been saved, we can get down to reading * the new file. We set up the name of the file to be the absolute * name of the include file so error messages refer to the right * place. */ curFile->fname = name; curFile->lineno = line; curFile->first_lineno = line; curFile->fd = fd; curFile->nextbuf = nextbuf; curFile->nextbuf_arg = arg; if (nextbuf == NULL) { /* * Allocate a 32k data buffer (as stdio seems to). * Set pointers so that first ParseReadc has to do a file read. */ buf = bmake_malloc(IFILE_BUFLEN); buf[0] = 0; curFile->P_str = buf; curFile->P_ptr = buf; curFile->P_end = buf; curFile->P_buflen = IFILE_BUFLEN; } else { /* Get first block of input data */ buf = curFile->nextbuf(curFile->nextbuf_arg); if (buf == NULL) { /* Was all a waste of time ... */ free(curFile); return; } curFile->P_str = buf; curFile->P_ptr = buf; curFile->P_end = NULL; } curFile->cond_depth = Cond_save_depth(); ParseSetParseFile(name); } #ifdef SYSVINCLUDE /*- *--------------------------------------------------------------------- * ParseTraditionalInclude -- * Push to another file. * * The input is the current line. The file name(s) are * following the "include". * * Results: * None * * Side Effects: * A structure is added to the includes Lst and readProc, lineno, * fname and curFILE are altered for the new file *--------------------------------------------------------------------- */ static void ParseTraditionalInclude(char *line) { char *cp; /* current position in file spec */ int done = 0; int silent = (line[0] != 'i') ? 1 : 0; char *file = &line[silent + 7]; char *all_files; if (DEBUG(PARSE)) { fprintf(debug_file, "ParseTraditionalInclude: %s\n", file); } /* * Skip over whitespace */ while (isspace((unsigned char)*file)) file++; /* * Substitute for any variables in the file name before trying to * find the thing. */ all_files = Var_Subst(NULL, file, VAR_CMD, FALSE); if (*file == '\0') { Parse_Error(PARSE_FATAL, "Filename missing from \"include\""); return; } for (file = all_files; !done; file = cp + 1) { /* Skip to end of line or next whitespace */ for (cp = file; *cp && !isspace((unsigned char) *cp); cp++) continue; if (*cp) *cp = '\0'; else done = 1; Parse_include_file(file, FALSE, silent); } free(all_files); } #endif /*- *--------------------------------------------------------------------- * ParseEOF -- * Called when EOF is reached in the current file. If we were reading * an include file, the includes stack is popped and things set up * to go back to reading the previous file at the previous location. * * Results: * CONTINUE if there's more to do. DONE if not. * * Side Effects: * The old curFILE, is closed. The includes list is shortened. * lineno, curFILE, and fname are changed if CONTINUE is returned. *--------------------------------------------------------------------- */ static int ParseEOF(void) { char *ptr; if (curFile->nextbuf != NULL) { /* eg .for loop data, get next iteration */ ptr = curFile->nextbuf(curFile->nextbuf_arg); curFile->P_ptr = ptr; curFile->P_str = ptr; curFile->lineno = curFile->first_lineno; if (ptr != NULL) { /* Iterate again */ return CONTINUE; } } /* Ensure the makefile (or loop) didn't have mismatched conditionals */ Cond_restore_depth(curFile->cond_depth); /* Dispose of curFile info */ /* Leak curFile->fname because all the gnodes have pointers to it */ if (curFile->fd != -1) close(curFile->fd); free(curFile->P_str); free(curFile); curFile = Lst_DeQueue(includes); if (curFile == NULL) { /* We've run out of input */ Var_Delete(".PARSEDIR", VAR_GLOBAL); Var_Delete(".PARSEFILE", VAR_GLOBAL); return DONE; } if (DEBUG(PARSE)) fprintf(debug_file, "ParseEOF: returning to file %s, line %d, fd %d\n", curFile->fname, curFile->lineno, curFile->fd); /* Restore the PARSEDIR/PARSEFILE variables */ ParseSetParseFile(curFile->fname); return (CONTINUE); } #define PARSE_RAW 1 #define PARSE_SKIP 2 static char * ParseGetLine(int flags, int *length) { IFile *cf = curFile; char *ptr; char ch; char *line; char *line_end; char *escaped; char *comment; char *tp; int len, dist; /* Loop through blank lines and comment lines */ for (;;) { cf->lineno++; line = cf->P_ptr; ptr = line; line_end = line; escaped = NULL; comment = NULL; for (;;) { ch = *ptr; if (ch == 0 || (ch == '\\' && ptr[1] == 0)) { if (cf->P_end == NULL) /* End of string (aka for loop) data */ break; /* End of data read from file, read more data */ if (ptr != cf->P_end && (ch != '\\' || ptr + 1 != cf->P_end)) { Parse_Error(PARSE_FATAL, "Zero byte read from file"); return NULL; } /* Move existing data to (near) start of file buffer */ len = cf->P_end - cf->P_ptr; tp = cf->P_str + 32; memmove(tp, cf->P_ptr, len); dist = cf->P_ptr - tp; /* Update all pointers to reflect moved data */ ptr -= dist; line -= dist; line_end -= dist; if (escaped) escaped -= dist; if (comment) comment -= dist; cf->P_ptr = tp; tp += len; cf->P_end = tp; /* Try to read more data from file into buffer space */ len = cf->P_str + cf->P_buflen - tp - 32; if (len <= 0) { /* We need a bigger buffer to hold this line */ tp = bmake_realloc(cf->P_str, cf->P_buflen + IFILE_BUFLEN); cf->P_ptr = cf->P_ptr - cf->P_str + tp; cf->P_end = cf->P_end - cf->P_str + tp; ptr = ptr - cf->P_str + tp; line = line - cf->P_str + tp; line_end = line_end - cf->P_str + tp; if (escaped) escaped = escaped - cf->P_str + tp; if (comment) comment = comment - cf->P_str + tp; cf->P_str = tp; tp = cf->P_end; len += IFILE_BUFLEN; cf->P_buflen += IFILE_BUFLEN; } len = read(cf->fd, tp, len); if (len <= 0) { if (len < 0) { Parse_Error(PARSE_FATAL, "Makefile read error: %s", strerror(errno)); return NULL; } /* End of file */ break; } /* 0 terminate the data, and update end pointer */ tp += len; cf->P_end = tp; *tp = 0; /* Process newly read characters */ continue; } if (ch == '\\') { /* Don't treat next character as special, remember first one */ if (escaped == NULL) escaped = ptr; if (ptr[1] == '\n') cf->lineno++; ptr += 2; line_end = ptr; continue; } if (ch == '#' && comment == NULL) { /* Remember first '#' for comment stripping */ comment = line_end; } ptr++; if (ch == '\n') break; if (!isspace((unsigned char)ch)) /* We are not interested in trailing whitespace */ line_end = ptr; } /* Save next 'to be processed' location */ cf->P_ptr = ptr; /* Check we have a non-comment, non-blank line */ if (line_end == line || comment == line) { if (ch == 0) /* At end of file */ return NULL; /* Parse another line */ continue; } /* We now have a line of data */ *line_end = 0; if (flags & PARSE_RAW) { /* Leave '\' (etc) in line buffer (eg 'for' lines) */ *length = line_end - line; return line; } if (flags & PARSE_SKIP) { /* Completely ignore non-directives */ if (line[0] != '.') continue; /* We could do more of the .else/.elif/.endif checks here */ } break; } /* Brutally ignore anything after a non-escaped '#' in non-commands */ if (comment != NULL && line[0] != '\t') { line_end = comment; *line_end = 0; } /* If we didn't see a '\\' then the in-situ data is fine */ if (escaped == NULL) { *length = line_end - line; return line; } /* Remove escapes from '\n' and '#' */ tp = ptr = escaped; escaped = line; for (; ; *tp++ = ch) { ch = *ptr++; if (ch != '\\') { if (ch == 0) break; continue; } ch = *ptr++; if (ch == 0) { /* Delete '\\' at end of buffer */ tp--; break; } if (ch == '#' && line[0] != '\t') /* Delete '\\' from before '#' on non-command lines */ continue; if (ch != '\n') { /* Leave '\\' in buffer for later */ *tp++ = '\\'; /* Make sure we don't delete an escaped ' ' from the line end */ escaped = tp + 1; continue; } /* Escaped '\n' replace following whitespace with a single ' ' */ while (ptr[0] == ' ' || ptr[0] == '\t') ptr++; ch = ' '; } /* Delete any trailing spaces - eg from empty continuations */ while (tp > escaped && isspace((unsigned char)tp[-1])) tp--; *tp = 0; *length = tp - line; return line; } /*- *--------------------------------------------------------------------- * ParseReadLine -- * Read an entire line from the input file. Called only by Parse_File. * * Results: * A line w/o its newline * * Side Effects: * Only those associated with reading a character *--------------------------------------------------------------------- */ static char * ParseReadLine(void) { char *line; /* Result */ int lineLength; /* Length of result */ int lineno; /* Saved line # */ int rval; for (;;) { line = ParseGetLine(0, &lineLength); if (line == NULL) return NULL; if (line[0] != '.') return line; /* * The line might be a conditional. Ask the conditional module * about it and act accordingly */ switch (Cond_Eval(line)) { case COND_SKIP: /* Skip to next conditional that evaluates to COND_PARSE. */ do { line = ParseGetLine(PARSE_SKIP, &lineLength); } while (line && Cond_Eval(line) != COND_PARSE); if (line == NULL) break; continue; case COND_PARSE: continue; case COND_INVALID: /* Not a conditional line */ /* Check for .for loops */ rval = For_Eval(line); if (rval == 0) /* Not a .for line */ break; if (rval < 0) /* Syntax error - error printed, ignore line */ continue; /* Start of a .for loop */ lineno = curFile->lineno; /* Accumulate loop lines until matching .endfor */ do { line = ParseGetLine(PARSE_RAW, &lineLength); if (line == NULL) { Parse_Error(PARSE_FATAL, "Unexpected end of file in for loop.\n"); break; } } while (For_Accum(line)); /* Stash each iteration as a new 'input file' */ For_Run(lineno); /* Read next line from for-loop buffer */ continue; } return (line); } } /*- *----------------------------------------------------------------------- * ParseFinishLine -- * Handle the end of a dependency group. * * Results: * Nothing. * * Side Effects: * inLine set FALSE. 'targets' list destroyed. * *----------------------------------------------------------------------- */ static void ParseFinishLine(void) { if (inLine) { Lst_ForEach(targets, Suff_EndTransform, NULL); Lst_Destroy(targets, ParseHasCommands); targets = NULL; inLine = FALSE; } } /*- *--------------------------------------------------------------------- * Parse_File -- * Parse a file into its component parts, incorporating it into the * current dependency graph. This is the main function and controls * almost every other function in this module * * Input: * name the name of the file being read * fd Open file to makefile to parse * * Results: * None * * Side Effects: * closes fd. * Loads. Nodes are added to the list of all targets, nodes and links * are added to the dependency graph. etc. etc. etc. *--------------------------------------------------------------------- */ void Parse_File(const char *name, int fd) { char *cp; /* pointer into the line */ char *line; /* the line we're working on */ inLine = FALSE; fatals = 0; Parse_SetInput(name, 0, fd, NULL, NULL); do { for (; (line = ParseReadLine()) != NULL; ) { if (DEBUG(PARSE)) fprintf(debug_file, "ParseReadLine (%d): '%s'\n", curFile->lineno, line); if (*line == '.') { /* * Lines that begin with the special character may be * include or undef directives. * On the other hand they can be suffix rules (.c.o: ...) * or just dependencies for filenames that start '.'. */ for (cp = line + 1; isspace((unsigned char)*cp); cp++) { continue; } if (strncmp(cp, "include", 7) == 0 || ((cp[0] == 's' || cp[0] == '-') && strncmp(&cp[1], "include", 7) == 0)) { ParseDoInclude(cp); continue; } if (strncmp(cp, "undef", 5) == 0) { char *cp2; for (cp += 5; isspace((unsigned char) *cp); cp++) continue; for (cp2 = cp; !isspace((unsigned char) *cp2) && (*cp2 != '\0'); cp2++) continue; *cp2 = '\0'; Var_Delete(cp, VAR_GLOBAL); continue; } else if (strncmp(cp, "export", 6) == 0) { for (cp += 6; isspace((unsigned char) *cp); cp++) continue; Var_Export(cp, 1); continue; } } if (*line == '\t') { /* * If a line starts with a tab, it can only hope to be * a creation command. */ cp = line + 1; shellCommand: for (; isspace ((unsigned char)*cp); cp++) { continue; } if (*cp) { if (!inLine) Parse_Error(PARSE_FATAL, "Unassociated shell command \"%s\"", cp); /* * So long as it's not a blank line and we're actually * in a dependency spec, add the command to the list of * commands of all targets in the dependency spec */ if (targets) { cp = bmake_strdup(cp); Lst_ForEach(targets, ParseAddCmd, cp); #ifdef CLEANUP Lst_AtEnd(targCmds, cp); #endif } } continue; } #ifdef SYSVINCLUDE if (((strncmp(line, "include", 7) == 0 && isspace((unsigned char) line[7])) || ((line[0] == 's' || line[0] == '-') && strncmp(&line[1], "include", 7) == 0 && isspace((unsigned char) line[8]))) && strchr(line, ':') == NULL) { /* * It's an S3/S5-style "include". */ ParseTraditionalInclude(line); continue; } #endif if (Parse_IsVar(line)) { ParseFinishLine(); Parse_DoVar(line, VAR_GLOBAL); continue; } #ifndef POSIX /* * To make life easier on novices, if the line is indented we * first make sure the line has a dependency operator in it. * If it doesn't have an operator and we're in a dependency * line's script, we assume it's actually a shell command * and add it to the current list of targets. */ cp = line; if (isspace((unsigned char) line[0])) { while ((*cp != '\0') && isspace((unsigned char) *cp)) cp++; while (*cp && (ParseIsEscaped(line, cp) || (*cp != ':') && (*cp != '!'))) { cp++; } if (*cp == '\0') { if (inLine) { Parse_Error(PARSE_WARNING, "Shell command needs a leading tab"); goto shellCommand; } } } #endif ParseFinishLine(); /* * For some reason - probably to make the parser impossible - * a ';' can be used to separate commands from dependencies. * Attempt to avoid ';' inside substitution patterns. */ { int level = 0; for (cp = line; *cp != 0; cp++) { if (*cp == '\\' && cp[1] != 0) { cp++; continue; } if (*cp == '$' && (cp[1] == '(' || cp[1] == '{')) { level++; continue; } if (level > 0) { if (*cp == ')' || *cp == '}') { level--; continue; } } else if (*cp == ';') { break; } } } if (*cp != 0) /* Terminate the dependency list at the ';' */ *cp++ = 0; else cp = NULL; /* * We now know it's a dependency line so it needs to have all * variables expanded before being parsed. Tell the variable * module to complain if some variable is undefined... */ line = Var_Subst(NULL, line, VAR_CMD, TRUE); /* * Need a non-circular list for the target nodes */ if (targets) Lst_Destroy(targets, NULL); targets = Lst_Init(FALSE); inLine = TRUE; ParseDoDependency(line); free(line); /* If there were commands after a ';', add them now */ if (cp != NULL) { goto shellCommand; } } /* * Reached EOF, but it may be just EOF of an include file... */ } while (ParseEOF() == CONTINUE); if (fatals) { (void)fprintf(stderr, "%s: Fatal errors encountered -- cannot continue\n", progname); PrintOnError(NULL); exit(1); } } /*- *--------------------------------------------------------------------- * Parse_Init -- * initialize the parsing module * * Results: * none * * Side Effects: * the parseIncPath list is initialized... *--------------------------------------------------------------------- */ void Parse_Init(void) { mainNode = NULL; parseIncPath = Lst_Init(FALSE); sysIncPath = Lst_Init(FALSE); defIncPath = Lst_Init(FALSE); includes = Lst_Init(FALSE); #ifdef CLEANUP targCmds = Lst_Init(FALSE); #endif } void Parse_End(void) { #ifdef CLEANUP Lst_Destroy(targCmds, (FreeProc *)free); if (targets) Lst_Destroy(targets, NULL); Lst_Destroy(defIncPath, Dir_Destroy); Lst_Destroy(sysIncPath, Dir_Destroy); Lst_Destroy(parseIncPath, Dir_Destroy); Lst_Destroy(includes, NULL); /* Should be empty now */ #endif } /*- *----------------------------------------------------------------------- * Parse_MainName -- * Return a Lst of the main target to create for main()'s sake. If * no such target exists, we Punt with an obnoxious error message. * * Results: * A Lst of the single node to create. * * Side Effects: * None. * *----------------------------------------------------------------------- */ Lst Parse_MainName(void) { Lst mainList; /* result list */ mainList = Lst_Init(FALSE); if (mainNode == NULL) { Punt("no target to make."); /*NOTREACHED*/ } else if (mainNode->type & OP_DOUBLEDEP) { (void)Lst_AtEnd(mainList, mainNode); Lst_Concat(mainList, mainNode->cohorts, LST_CONCNEW); } else (void)Lst_AtEnd(mainList, mainNode); Var_Append(".TARGETS", mainNode->name, VAR_GLOBAL); return (mainList); } /*- *----------------------------------------------------------------------- * ParseMark -- * Add the filename and lineno to the GNode so that we remember * where it was first defined. * * Side Effects: * None. * *----------------------------------------------------------------------- */ static void ParseMark(GNode *gn) { gn->fname = curFile->fname; gn->lineno = curFile->lineno; }