/* * Copyright (c) 1998 Matthias Apitz. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * 4. Altered versions must be plainly marked as such, and must not be * misrepresented as being the original software and/or documentation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *--------------------------------------------------------------------------- * * Fritz!Card pcmcia specific routines for isic driver * --------------------------------------------------- * * $Id: isic_pcmcia_avm_fritz.c,v 1.9 2005/07/01 15:05:07 martin Exp $ * * last edit-date: [Fri Jan 5 11:39:32 2001] * * -ap added support for AVM PCMCIA Fritz!Card * -mh split into separate file * *---------------------------------------------------------------------------*/ #include __KERNEL_RCSID(0, "$NetBSD: isic_pcmcia_avm_fritz.c,v 1.9 2005/07/01 15:05:07 martin Exp $"); #include "opt_isicpcmcia.h" #ifdef ISICPCMCIA_AVM_A1 #include #if defined(__FreeBSD__) && __FreeBSD__ >= 3 #include #else #include #endif #include #include #include #ifdef __FreeBSD__ #include #include #else #include #include #endif #include #include #if defined(__NetBSD__) && __NetBSD_Version__ >= 104230000 #include #endif #ifdef __FreeBSD__ #include #include #else #include #include #include #include #include #include #endif #include #include #include #ifndef __FreeBSD__ #include /* PCMCIA support routines */ static u_int8_t avma1_pcmcia_read_reg(struct isic_softc *sc, int what, bus_size_t offs); static void avma1_pcmcia_write_reg(struct isic_softc *sc, int what, bus_size_t offs, u_int8_t data); static void avma1_pcmcia_read_fifo(struct isic_softc *sc, int what, void *buf, size_t size); static void avma1_pcmcia_write_fifo(struct isic_softc *sc, int what, const void *data, size_t size); #endif /*---------------------------------------------------------------------------* * AVM PCMCIA Fritz!Card special registers *---------------------------------------------------------------------------*/ /* * register offsets from i/o base 0x140 or 0x300 */ #define ADDR_REG_OFFSET 0x02 #define DATA_REG_OFFSET 0x03 #define STAT0_OFFSET 0x04 #define STAT1_OFFSET 0x05 #define MODREG_OFFSET 0x06 #define VERREG_OFFSET 0x07 /* * AVM PCMCIA Status Latch 0 read only bits */ #define ASL_IRQ_TIMER 0x10 /* Timer interrupt, active low */ #define ASL_IRQ_ISAC 0x20 /* ISAC interrupt, active low */ #define ASL_IRQ_HSCX 0x40 /* HSX interrupt, active low */ #define ASL_IRQ_BCHAN ASL_IRQ_HSCX #define ASL_IRQ_Pending (ASL_IRQ_ISAC | ASL_IRQ_HSCX | ASL_IRQ_TIMER) /* * AVM Status Latch 0 write only bits */ #define ASL_RESET_ALL 0x01 /* reset siemens IC's, active 1 */ #define ASL_TIMERDISABLE 0x02 /* active high */ #define ASL_TIMERRESET 0x04 /* active high */ #define ASL_ENABLE_INT 0x08 /* active high */ /* * AVM Status Latch 1 write only bits */ #define ASL1_LED0 0x10 /* active high */ #define ASL1_LED1 0x20 /* active high */ #define ASL1_ENABLE_S0 0xc0 /* enable active S0 I/F */ /*----- EEpromless controller -----*/ /* * AVM Status Latch read/write bit */ #define ASL_TESTBIT 0x80 /*---------------------------------------------------------------------------* * AVM read fifo routines *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ static int PCMCIA_IO_BASE = 0; /* ap: XXX hack */ static void avma1_pcmcia_read_fifo(void *buf, const void *base, size_t len) { outb(PCMCIA_IO_BASE + ADDR_REG_OFFSET, (int)base - 0x20); insb(PCMCIA_IO_BASE + DATA_REG_OFFSET, (u_char *)buf, (u_int)len); } #else /* offsets of the different 'what' arguments */ static u_int8_t what_map[] = { 0x20-0x20, /* ISIC_WHAT_ISAC */ 0xA0-0x20, /* ISIC_WHAT_HSCXA */ 0xE0-0x20 /* ISIC_WHAT_HSCXB */ }; static void avma1_pcmcia_read_fifo(struct isic_softc *sc, int what, void *buf, size_t size) { bus_space_tag_t t = sc->sc_maps[0].t; bus_space_handle_t h = sc->sc_maps[0].h; bus_space_write_1(t, h, ADDR_REG_OFFSET, what_map[what]); bus_space_read_multi_1(t, h, DATA_REG_OFFSET, buf, size); } #endif /*---------------------------------------------------------------------------* * AVM write fifo routines *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ static void avma1_pcmcia_write_fifo(void *base, const void *buf, size_t len) { outb(PCMCIA_IO_BASE + ADDR_REG_OFFSET, (int)base - 0x20); outsb(PCMCIA_IO_BASE + DATA_REG_OFFSET, (u_char *)buf, (u_int)len); } #else static void avma1_pcmcia_write_fifo(struct isic_softc *sc, int what, const void *buf, size_t size) { bus_space_tag_t t = sc->sc_maps[0].t; bus_space_handle_t h = sc->sc_maps[0].h; bus_space_write_1(t, h, ADDR_REG_OFFSET, what_map[what]); bus_space_write_multi_1(t, h, DATA_REG_OFFSET, buf, size); } #endif /*---------------------------------------------------------------------------* * AVM write register routines *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ static void avma1_pcmcia_write_reg(u_char *base, u_int offset, u_int v) { /* offset includes 0x20 FIFO ! */ outb(PCMCIA_IO_BASE + ADDR_REG_OFFSET, (int)base+offset-0x20); outb(PCMCIA_IO_BASE + DATA_REG_OFFSET, (u_char)v); } #else static void avma1_pcmcia_write_reg(struct isic_softc *sc, int what, bus_size_t offs, u_int8_t data) { bus_space_tag_t t = sc->sc_maps[0].t; bus_space_handle_t h = sc->sc_maps[0].h; bus_space_write_1(t, h, ADDR_REG_OFFSET, what_map[what]+offs); bus_space_write_1(t, h, DATA_REG_OFFSET, data); } #endif /*---------------------------------------------------------------------------* * AVM read register routines *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ static u_char avma1_pcmcia_read_reg(u_char *base, u_int offset) { /* offset includes 0x20 FIFO ! */ outb(PCMCIA_IO_BASE + ADDR_REG_OFFSET, (int)base+offset-0x20); return (inb(PCMCIA_IO_BASE + DATA_REG_OFFSET)); } #else static u_int8_t avma1_pcmcia_read_reg(struct isic_softc *sc, int what, bus_size_t offs) { bus_space_tag_t t = sc->sc_maps[0].t; bus_space_handle_t h = sc->sc_maps[0].h; bus_space_write_1(t, h, ADDR_REG_OFFSET, what_map[what]+offs); return bus_space_read_1(t, h, DATA_REG_OFFSET); } #endif /*---------------------------------------------------------------------------* * isic_probe_avma1_pcmcia - probe for AVM PCMCIA Fritz!Card * This is in the bus attachemnt part on NetBSD (isic_pcmcia.c), no * card specicfic probe is needed on direct config buses like pcmcia. *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ int isic_probe_avma1_pcmcia(struct isa_device *dev) { struct isic_softc *sc = &l1_sc[dev->id_unit]; u_char byte; int i; u_int cardinfo; /* check max unit range */ if(dev->id_unit > 1) { printf("isic%d: Error, unit %d > MAXUNIT for AVM PCMCIA Fritz!Card\n", dev->id_unit, dev->id_unit); return(0); } sc->sc_unit = dev->id_unit; /* * we trust the IRQ we got from PCCARD service */ sc->sc_irq = dev->id_irq; /* check if we got an iobase */ switch(dev->id_iobase) { case 0x140: case 0x300: break; default: printf("isic%d: Error, invalid iobase 0x%x specified for AVM PCMCIA Fritz!Card.\n", dev->id_unit, dev->id_iobase); return(0); break; } sc->sc_port = dev->id_iobase; /* ResetController */ outb(dev->id_iobase + STAT0_OFFSET, 0x00); DELAY(SEC_DELAY / 20); outb(dev->id_iobase + STAT0_OFFSET, 0x01); DELAY(SEC_DELAY / 20); outb(dev->id_iobase + STAT0_OFFSET, 0x00); /* * CheckController * The logic to check for the PCMCIA was adapted as * described by AVM. */ outb(dev->id_iobase + ADDR_REG_OFFSET, 0x21); /* ISAC STAR */ if ( (byte=inb(dev->id_iobase + DATA_REG_OFFSET) & 0xfd) != 0x48 ) { printf("isic%d: Error, ISAC STAR for AVM PCMCIA is 0x%0x (should be 0x48)\n", dev->id_unit, byte); return(0); } outb(dev->id_iobase + ADDR_REG_OFFSET, 0xa1); /* HSCX STAR */ if ( (byte=inb(dev->id_iobase + DATA_REG_OFFSET) & 0xfd) != 0x48 ) { printf("isic%d: Error, HSCX STAR for AVM PCMCIA is 0x%0x (should be 0x48)\n", dev->id_unit, byte); return(0); } byte = ASL_TESTBIT; for (i=0; i<256; i++) { byte = byte ? 0 : ASL_TESTBIT; outb(dev->id_iobase + STAT0_OFFSET, byte); if ((inb(dev->id_iobase+STAT0_OFFSET)&ASL_TESTBIT)!=byte) { printf("isic%d: Error during toggle of AVM PCMCIA Status Latch0\n", dev->id_unit); return(0); } } sc->clearirq = NULL; sc->readreg = avma1_pcmcia_read_reg; sc->writereg = avma1_pcmcia_write_reg; sc->readfifo = avma1_pcmcia_read_fifo; sc->writefifo = avma1_pcmcia_write_fifo; /* setup IOM bus type */ sc->sc_bustyp = BUS_TYPE_IOM2; /* ap: XXX ??? */ sc->sc_ipac = 0; sc->sc_bfifolen = HSCX_FIFO_LEN; /* setup ISAC and HSCX base addr */ /* * NOTE: for PCMCIA these are no real addrs; they are * offsets to be written into the base+ADDR_REG_OFFSET register * to pick up the values of the bytes fro base+DATA_REG_OFFSET * * see also the logic in the avma1_pcmcia_* routines; * therefore we also must have the base addr in some static * space or struct; XXX better solution? */ PCMCIA_IO_BASE = dev->id_iobase; ISAC_BASE = (caddr_t)0x20; HSCX_A_BASE = (caddr_t)0xA0; HSCX_B_BASE = (caddr_t)0xE0; /* * Read HSCX A/B VSTR. * Expected value for AVM A1 is 0x04 or 0x05 and for the * AVM Fritz!Card is 0x05 in the least significant bits. */ if( (((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) && ((HSCX_READ(0, H_VSTR) & 0xf) != 0x4)) || (((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) && ((HSCX_READ(1, H_VSTR) & 0xf) != 0x4)) ) { printf("isic%d: HSCX VSTR test failed for AVM PCMCIA Fritz!Card\n", dev->id_unit); printf("isic%d: HSC0: VSTR: 0x%0x\n", dev->id_unit, HSCX_READ(0, H_VSTR)); printf("isic%d: HSC1: VSTR: 0x%0x\n", dev->id_unit, HSCX_READ(1, H_VSTR)); return (0); } /* * seems we really have an AVM PCMCIA Fritz!Card controller */ cardinfo = inb(dev->id_iobase + VERREG_OFFSET)<<8 | inb(dev->id_iobase + MODREG_OFFSET); printf("isic%d: successfully detect AVM PCMCIA cardinfo = 0x%0x\n", dev->id_unit, cardinfo); dev->id_flags = FLAG_AVM_A1_PCMCIA; return (1); } #endif /* __FreeBSD__ */ /*---------------------------------------------------------------------------* * isic_attach_fritzpcmcia - attach Fritz!Card *---------------------------------------------------------------------------*/ #ifdef __FreeBSD__ int isic_attach_fritzpcmcia(struct isa_device *dev) { /* ResetController again just to make sure... */ outb(dev->id_iobase + STAT0_OFFSET, 0x00); DELAY(SEC_DELAY / 10); outb(dev->id_iobase + STAT0_OFFSET, 0x01); DELAY(SEC_DELAY / 10); outb(dev->id_iobase + STAT0_OFFSET, 0x00); DELAY(SEC_DELAY / 10); /* enable IRQ, disable counter IRQ */ outb(dev->id_iobase + STAT0_OFFSET, ASL_TIMERDISABLE | ASL_TIMERRESET | ASL_ENABLE_INT); /* DELAY(SEC_DELAY / 10); */ return(1); } #else int isic_attach_fritzpcmcia(struct pcmcia_isic_softc *psc, struct pcmcia_config_entry *cfe, struct pcmcia_attach_args *pa) { struct isic_softc *sc = &psc->sc_isic; bus_space_tag_t t; bus_space_handle_t h; int i; /* Validate config info */ if (cfe->num_memspace != 0) printf(": unexpected number of memory spaces %d should be 0\n", cfe->num_memspace); if (cfe->num_iospace != 1) printf(": unexpected number of memory spaces %d should be 1\n", cfe->num_iospace); /* Allocate pcmcia space - but don't listen to the card, it's lying about the size needed! */ for (i = 0; i < cfe->num_iospace; i++) if (pcmcia_io_alloc(pa->pf, cfe->iospace[i].start, cfe->iospace[i].length, 1, &psc->sc_pcioh) == 0) break; if (i >= cfe->num_iospace) { printf(": can't allocate i/o space\n"); return 0; } /* map the selected space */ if (pcmcia_io_map(pa->pf, ((cfe->flags & PCMCIA_CFE_IO16) ? PCMCIA_WIDTH_IO16 : PCMCIA_WIDTH_IO8), &psc->sc_pcioh, &psc->sc_io_window)) { printf(": can't map i/o space\n"); return 0; } /* Setup bus space maps */ sc->sc_num_mappings = 1; MALLOC_MAPS(sc); /* Copy our handles/tags to the MI maps */ sc->sc_maps[0].t = psc->sc_pcioh.iot; sc->sc_maps[0].h = psc->sc_pcioh.ioh; sc->sc_maps[0].offset = 0; sc->sc_maps[0].size = 0; /* not our mapping */ t = sc->sc_maps[0].t; h = sc->sc_maps[0].h; sc->clearirq = NULL; sc->readreg = avma1_pcmcia_read_reg; sc->writereg = avma1_pcmcia_write_reg; sc->readfifo = avma1_pcmcia_read_fifo; sc->writefifo = avma1_pcmcia_write_fifo; /* setup IOM bus type */ sc->sc_bustyp = BUS_TYPE_IOM2; sc->sc_ipac = 0; sc->sc_bfifolen = HSCX_FIFO_LEN; /* Reset controller again just to make sure... */ bus_space_write_1(t, h, STAT0_OFFSET, 0x00); DELAY(SEC_DELAY / 10); bus_space_write_1(t, h, STAT0_OFFSET, 0x01); DELAY(SEC_DELAY / 10); bus_space_write_1(t, h, STAT0_OFFSET, 0x00); DELAY(SEC_DELAY / 10); /* enable IRQ, disable counter IRQ */ bus_space_write_1(t, h, STAT0_OFFSET, ASL_TIMERDISABLE | ASL_TIMERRESET | ASL_ENABLE_INT); return 1; } #endif #endif /* ISICPCMCIA_AVM_A1 */