#	$NetBSD: GENERIC,v 1.27 2000/02/22 11:25:58 soda Exp $
#	$OpenBSD: GENERIC,v 1.29 1999/08/29 12:14:03 niklas Exp $
#
#	GENERIC -- everything that's currently supported
#

include		"arch/arc/conf/std.arc"

#ident		"GENERIC-$Revision: 1.27 $"

maxusers	32		# estimated number of users

# Standard system options

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
options 	NTP		# NTP phase/frequency locked loop

options 	KTRACE		# system call tracing via ktrace(1)

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
options 	SYSVSHM		# System V-like memory sharing
#options 	SHMMAXPGS=1024	# 1024 pages is the default

options 	LKM		# loadable kernel modules

# Diagnostic/debugging support options
options 	DIAGNOSTIC	# cheap kernel consistency checks
#options 	DEBUG		# expensive debugging checks/support
#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
options 	DDB		# in-kernel debugger
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
#options 	KGDB		# remote gdb
#options 	KGDBRATE=19200	# kernel gdb port rate (default 9600)
#options 	KGDBDEV="17*256+0"	# device for kernel gdb
#makeoptions	DEBUG="-g"	# compile full symbol table

# Compatibility options
options 	COMPAT_10	# NetBSD 1.0,
options 	COMPAT_11	# NetBSD 1.1,
options 	COMPAT_12	# NetBSD 1.2,
options 	COMPAT_13	# NetBSD 1.3,
options 	COMPAT_14	# NetBSD 1.4,
options 	COMPAT_43	# and 4.3BSD
options 	COMPAT_386BSD_MBRPART # recognize old partition ID

# mipsel specific
options 	COMPAT_ULTRIX	# Ultrix binary compatibility
options 	EXEC_ECOFF	# Ultrix RISC binaries are ECOFF format

# File systems
file-system 	FFS		# fast filesystem
file-system 	EXT2FS		# second extended file system (linux)
file-system 	LFS		# log-structured file system
file-system 	MFS		# memory file system
file-system 	NTFS		# Windows/NT file system (experimental)
file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system
file-system 	NFS		# Network File System client
file-system 	FDESC		# /dev/fd
file-system 	KERNFS		# /kern
file-system 	NULLFS		# loopback file system
file-system 	OVERLAY		# overlay file system
file-system 	PORTAL		# portal filesystem (still experimental)
file-system 	PROCFS		# /proc
file-system 	UMAPFS		# NULLFS + uid and gid remapping
file-system 	UNION		# union file system
#file-system	CODA		# Coda File System; also needs vcoda (below)

# File system options
options 	QUOTA		# FFS quotas
#options 	FFS_EI		# FFS Endian Independent support
#options 	SOFTDEP		# FFS soft updates support.
options 	NFSSERVER	# Network File System server
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.

# Pull in config fragments for kernel crypto.  This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.

#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix

#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix

# Networking options
#options 	GATEWAY		# IP packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
options 	ISO,TPIP	# OSI networking
options 	EON		# OSI tunneling over IP
options 	CCITT,LLC,HDLC	# X.25
options 	NETATALK	# AppleTalk networking protocols
options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
options 	PPP_DEFLATE	# Deflate compression support for PPP
options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
options 	PFIL_HOOKS	# pfil(9) packet filter hooks
options 	IPFILTER_LOG	# ipmon(8) log support

# Compatibility with 4.2BSD implementation of TCP/IP.  Not recommended.
#options 	TCP_COMPAT_42

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options 	EISAVERBOSE	# verbose EISA device autoconfig messages
#options 	PCIVERBOSE	# verbose PCI device autoconfig messages
options 	SCSIVERBOSE	# human readable SCSI error messages

# Kernel root file system and dump configuration.
options 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
config		netbsd	root on ? type ?
#config		netbsd	root on sd0a type ffs
#config		netbsd	root on ? type nfs

#
# Device configuration
#

mainbus0	at root
cpu*		at mainbus0

#### Pica bus devices

pica*		at mainbus0	# ACER Pica systems local bus.
aclock0 	at pica?
pc0		at pica?
opms0		at pica?
com0		at pica?
com1		at pica?
lpt0		at pica?
sn0		at pica?

fdc0		at pica?
fd*		at fdc? drive ?

asc0		at pica?
scsibus* 	at asc?

#### ISA bus devices

isabr*		at mainbus0	# ISA Bus bridge (std ISA bus).
isa*		at isabr?
#isadma0 	at isa?

aclock0 	at isa? port 0x70 irq 0

pc0		at isa? port 0x60 irq 1		# generic PC console device
com0		at isa? port 0x3f8 irq 4
com1		at isa? port 0x2f8 irq 3
com2		at isa? port 0x3e8 irq 4
com3		at isa? port 0x2e8 irq 3
ast0		at isa? port 0x1a0 irq 3	# AST 4-port serial cards
com*		at ast? slave ?

# Joystick driver. Probe is a little strange; add only if you have one.
#joy0		at isa? port 0x201

# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
# XXX - should be configured
#wdc0		at isa? port 0x1f0 irq 14 flags 0x00
#wdc1		at isa? port 0x170 irq 15 flags 0x00
#wdc*		at isapnp?

# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
# XXX - should be configured
#wd*		at wdc? channel ? drive ? flags 0x0000

# ATAPI bus support
# XXX - should be configured
#atapibus*	at wdc? channel ?

# ATAPI devices
# flags have the same meaning as for IDE drives.
# XXX - should be configured
#cd*		at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
#sd*		at atapibus? drive ? flags 0x0000	# ATAPI disk drives
#uk*		at atapibus? drive ? flags 0x0000	# ATAPI unknown

# ISA parallel printer interfaces
lpt0		at isa? port 0x378 irq 7

# ISA network interfaces
# XXX - should be configured
#ec0		at isa? port 0x250 iomem 0xd8000 irq 9	# 3Com 3c503 Ethernet
#ep0		at isa? port ? irq ?		# 3C509 ethernet cards
#ne0		at isa? port 0x280 irq 9	# NE[12]000 ethernet cards
#ne1		at isa? port 0x300 irq 10
#ne*		at isapnp?			# NE[12]000 PnP ethernet
#we0		at isa? port 0x280 iomem 0xd0000 irq 9	# WD/SMC Ethernet
#we1		at isa? port 0x300 iomem 0xcc000 irq 10
#we*		at isapnp?

# XXX - should be configured
#btl0		at isa? port 0x330 irq ? drq ?
#scsibus*	at btl?

#### Algor bus devices

#algor*		at mainbus0	# Algorithmics local bus.

#aclock0 	at algor?
#com0		at algor?
#com1		at algor?
#lpt0		at algor?

#### PCI bus devices

#pbcpcibr*	at mainbus0	# Algorithmics PCI bus bridge.
#pci*		at pbcpcibr?

#pcivga* 	at pci? dev ? function ?
#ncr*		at pci? dev ? function ?
#scsibus* 	at ncr?
#de*		at pci? dev ? function ?

#### SCSI bus devices

sd*		at scsibus? target ? lun ?
st*		at scsibus? target ? lun ?
cd*		at scsibus? target ? lun ?
ch*		at scsibus? target ? lun ?
ss*		at scsibus? target ? lun ?
uk*		at scsibus? target ? lun ?

#### Pseudo devices

# disk/mass storage pseudo-devices
pseudo-device	ccd		4	# concatenated/striped disk devices
#pseudo-device	raid		4	# RAIDframe disk driver
pseudo-device	md		1	# memory disk device (ramdisk)
pseudo-device	vnd		4	# disk-like interface to files

# network pseudo-devices
pseudo-device	bpfilter	8	# Berkeley packet filter
pseudo-device	ipfilter		# IP filter (firewall) and NAT
pseudo-device	loop		1	# network loopback
pseudo-device	ppp		2	# Point-to-Point Protocol
pseudo-device	sl		2	# Serial Line IP
#pseudo-device	strip		2	# Starmode Radio IP (Metricom)
pseudo-device	tun		2	# network tunneling over tty
#pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f

# miscellaneous pseudo-devices
pseudo-device	pty		64	# pseudo-terminals
pseudo-device	tb		1	# tablet line discipline
#pseudo-device	sequencer	1	# MIDI sequencer
# rnd works; RND_COM does not on port arc yet.
pseudo-device	rnd			# /dev/random and in-kernel generator
#options 	RND_COM			# use "com" randomness as well (BROKEN)

# a pseudo device needed for Coda	# also needs CODA (above)
#pseudo-device	vcoda		4	# coda minicache <-> venus comm.

# mouse & keyboard multiplexor pseudo-devices
#pseudo-device	wsmux		2