/* * Author: Tatu Ylonen * Copyright (c) 1995 Tatu Ylonen , Espoo, Finland * All rights reserved * This file contains code implementing the packet protocol and communication * with the other side. This same code is used both on client and server side. * * As far as I am concerned, the code I have written for this software * can be used freely for any purpose. Any derived versions of this * software must be clearly marked as such, and if the derived work is * incompatible with the protocol description in the RFC file, it must be * called by a name other than "ssh" or "Secure Shell". * * * SSH2 packet format added by Markus Friedl. * Copyright (c) 2000 Markus Friedl. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "includes.h" RCSID("$OpenBSD: packet.c,v 1.56 2001/03/03 21:41:07 millert Exp $"); #include "xmalloc.h" #include "buffer.h" #include "packet.h" #include "bufaux.h" #include "crc32.h" #include "getput.h" #include "compress.h" #include "deattack.h" #include "channels.h" #include "compat.h" #include "ssh1.h" #include "ssh2.h" #include "cipher.h" #include "kex.h" #include "mac.h" #include "log.h" #include "canohost.h" #ifdef PACKET_DEBUG #define DBG(x) x #else #define DBG(x) #endif /* * This variable contains the file descriptors used for communicating with * the other side. connection_in is used for reading; connection_out for * writing. These can be the same descriptor, in which case it is assumed to * be a socket. */ static int connection_in = -1; static int connection_out = -1; /* * Cipher type. This value is only used to determine whether to pad the * packets with zeroes or random data. */ static int cipher_type = SSH_CIPHER_NONE; /* Protocol flags for the remote side. */ static u_int remote_protocol_flags = 0; /* Encryption context for receiving data. This is only used for decryption. */ static CipherContext receive_context; /* Encryption context for sending data. This is only used for encryption. */ static CipherContext send_context; /* Buffer for raw input data from the socket. */ static Buffer input; /* Buffer for raw output data going to the socket. */ static Buffer output; /* Buffer for the partial outgoing packet being constructed. */ static Buffer outgoing_packet; /* Buffer for the incoming packet currently being processed. */ static Buffer incoming_packet; /* Scratch buffer for packet compression/decompression. */ static Buffer compression_buffer; /* Flag indicating whether packet compression/decompression is enabled. */ static int packet_compression = 0; /* default maximum packet size */ int max_packet_size = 32768; /* Flag indicating whether this module has been initialized. */ static int initialized = 0; /* Set to true if the connection is interactive. */ static int interactive_mode = 0; /* True if SSH2 packet format is used */ int use_ssh2_packet_format = 0; /* Session key information for Encryption and MAC */ Kex *kex = NULL; void packet_set_kex(Kex *k) { if( k->mac[MODE_IN ].key == NULL || k->enc[MODE_IN ].key == NULL || k->enc[MODE_IN ].iv == NULL || k->mac[MODE_OUT].key == NULL || k->enc[MODE_OUT].key == NULL || k->enc[MODE_OUT].iv == NULL) fatal("bad KEX"); kex = k; } static void clear_enc_keys(Enc *enc, int len) { memset(enc->iv, 0, len); memset(enc->key, 0, len); xfree(enc->iv); xfree(enc->key); enc->iv = NULL; enc->key = NULL; } void packet_set_ssh2_format(void) { DBG(debug("use_ssh2_packet_format")); use_ssh2_packet_format = 1; } /* * Sets the descriptors used for communication. Disables encryption until * packet_set_encryption_key is called. */ void packet_set_connection(int fd_in, int fd_out) { Cipher *none = cipher_by_name("none"); if (none == NULL) fatal("packet_set_connection: cannot load cipher 'none'"); connection_in = fd_in; connection_out = fd_out; cipher_type = SSH_CIPHER_NONE; cipher_init(&send_context, none, (u_char *) "", 0, NULL, 0); cipher_init(&receive_context, none, (u_char *) "", 0, NULL, 0); if (!initialized) { initialized = 1; buffer_init(&input); buffer_init(&output); buffer_init(&outgoing_packet); buffer_init(&incoming_packet); } /* Kludge: arrange the close function to be called from fatal(). */ fatal_add_cleanup((void (*) (void *)) packet_close, NULL); } /* Returns 1 if remote host is connected via socket, 0 if not. */ int packet_connection_is_on_socket() { struct sockaddr_storage from, to; socklen_t fromlen, tolen; /* filedescriptors in and out are the same, so it's a socket */ if (connection_in == connection_out) return 1; fromlen = sizeof(from); memset(&from, 0, sizeof(from)); if (getpeername(connection_in, (struct sockaddr *)&from, &fromlen) < 0) return 0; tolen = sizeof(to); memset(&to, 0, sizeof(to)); if (getpeername(connection_out, (struct sockaddr *)&to, &tolen) < 0) return 0; if (fromlen != tolen || memcmp(&from, &to, fromlen) != 0) return 0; if (from.ss_family != AF_INET && from.ss_family != AF_INET6) return 0; return 1; } /* returns 1 if connection is via ipv4 */ int packet_connection_is_ipv4() { struct sockaddr_storage to; socklen_t tolen = sizeof(to); memset(&to, 0, sizeof(to)); if (getsockname(connection_out, (struct sockaddr *)&to, &tolen) < 0) return 0; if (to.ss_family != AF_INET) return 0; return 1; } /* Sets the connection into non-blocking mode. */ void packet_set_nonblocking() { /* Set the socket into non-blocking mode. */ if (fcntl(connection_in, F_SETFL, O_NONBLOCK) < 0) error("fcntl O_NONBLOCK: %.100s", strerror(errno)); if (connection_out != connection_in) { if (fcntl(connection_out, F_SETFL, O_NONBLOCK) < 0) error("fcntl O_NONBLOCK: %.100s", strerror(errno)); } } /* Returns the socket used for reading. */ int packet_get_connection_in() { return connection_in; } /* Returns the descriptor used for writing. */ int packet_get_connection_out() { return connection_out; } /* Closes the connection and clears and frees internal data structures. */ void packet_close() { if (!initialized) return; initialized = 0; if (connection_in == connection_out) { shutdown(connection_out, SHUT_RDWR); close(connection_out); } else { close(connection_in); close(connection_out); } buffer_free(&input); buffer_free(&output); buffer_free(&outgoing_packet); buffer_free(&incoming_packet); if (packet_compression) { buffer_free(&compression_buffer); buffer_compress_uninit(); } } /* Sets remote side protocol flags. */ void packet_set_protocol_flags(u_int protocol_flags) { remote_protocol_flags = protocol_flags; channel_set_options((protocol_flags & SSH_PROTOFLAG_HOST_IN_FWD_OPEN) != 0); } /* Returns the remote protocol flags set earlier by the above function. */ u_int packet_get_protocol_flags() { return remote_protocol_flags; } /* * Starts packet compression from the next packet on in both directions. * Level is compression level 1 (fastest) - 9 (slow, best) as in gzip. */ /*** XXXXX todo: kex means re-init */ void packet_start_compression(int level) { if (packet_compression) fatal("Compression already enabled."); packet_compression = 1; buffer_init(&compression_buffer); buffer_compress_init(level); } /* * Encrypts the given number of bytes, copying from src to dest. bytes is * known to be a multiple of 8. */ static void packet_encrypt(CipherContext * cc, void *dest, void *src, u_int bytes) { cipher_encrypt(cc, dest, src, bytes); } /* * Decrypts the given number of bytes, copying from src to dest. bytes is * known to be a multiple of 8. */ static void packet_decrypt(CipherContext *context, void *dest, void *src, u_int bytes) { /* * Cryptographic attack detector for ssh - Modifications for packet.c * (C)1998 CORE-SDI, Buenos Aires Argentina Ariel Futoransky(futo@core-sdi.com) */ if (!compat20 && context->cipher->number != SSH_CIPHER_NONE && detect_attack(src, bytes, NULL) == DEATTACK_DETECTED) packet_disconnect("crc32 compensation attack: network attack detected"); cipher_decrypt(context, dest, src, bytes); } /* * Causes any further packets to be encrypted using the given key. The same * key is used for both sending and reception. However, both directions are * encrypted independently of each other. */ void packet_set_encryption_key(const u_char *key, u_int keylen, int number) { Cipher *cipher = cipher_by_number(number); if (cipher == NULL) fatal("packet_set_encryption_key: unknown cipher number %d", number); if (keylen < 20) fatal("packet_set_encryption_key: keylen too small: %d", keylen); cipher_init(&receive_context, cipher, key, keylen, NULL, 0); cipher_init(&send_context, cipher, key, keylen, NULL, 0); } /* Starts constructing a packet to send. */ static void packet_start1(int type) { char buf[9]; buffer_clear(&outgoing_packet); memset(buf, 0, 8); buf[8] = type; buffer_append(&outgoing_packet, buf, 9); } static void packet_start2(int type) { char buf[4+1+1]; buffer_clear(&outgoing_packet); memset(buf, 0, sizeof buf); /* buf[0..3] = payload_len; */ /* buf[4] = pad_len; */ buf[5] = type & 0xff; buffer_append(&outgoing_packet, buf, sizeof buf); } void packet_start(int type) { DBG(debug("packet_start[%d]", type)); if (use_ssh2_packet_format) packet_start2(type); else packet_start1(type); } /* Appends a character to the packet data. */ void packet_put_char(int value) { char ch = value; buffer_append(&outgoing_packet, &ch, 1); } /* Appends an integer to the packet data. */ void packet_put_int(u_int value) { buffer_put_int(&outgoing_packet, value); } /* Appends a string to packet data. */ void packet_put_string(const char *buf, u_int len) { buffer_put_string(&outgoing_packet, buf, len); } void packet_put_cstring(const char *str) { buffer_put_string(&outgoing_packet, str, strlen(str)); } void packet_put_raw(const char *buf, u_int len) { buffer_append(&outgoing_packet, buf, len); } /* Appends an arbitrary precision integer to packet data. */ void packet_put_bignum(BIGNUM * value) { buffer_put_bignum(&outgoing_packet, value); } void packet_put_bignum2(BIGNUM * value) { buffer_put_bignum2(&outgoing_packet, value); } /* * Finalizes and sends the packet. If the encryption key has been set, * encrypts the packet before sending. */ static void packet_send1(void) { char buf[8], *cp; int i, padding, len; u_int checksum; u_int32_t rand = 0; /* * If using packet compression, compress the payload of the outgoing * packet. */ if (packet_compression) { buffer_clear(&compression_buffer); /* Skip padding. */ buffer_consume(&outgoing_packet, 8); /* padding */ buffer_append(&compression_buffer, "\0\0\0\0\0\0\0\0", 8); buffer_compress(&outgoing_packet, &compression_buffer); buffer_clear(&outgoing_packet); buffer_append(&outgoing_packet, buffer_ptr(&compression_buffer), buffer_len(&compression_buffer)); } /* Compute packet length without padding (add checksum, remove padding). */ len = buffer_len(&outgoing_packet) + 4 - 8; /* Insert padding. Initialized to zero in packet_start1() */ padding = 8 - len % 8; if (cipher_type != SSH_CIPHER_NONE) { cp = buffer_ptr(&outgoing_packet); for (i = 0; i < padding; i++) { if (i % 4 == 0) rand = arc4random(); cp[7 - i] = rand & 0xff; rand >>= 8; } } buffer_consume(&outgoing_packet, 8 - padding); /* Add check bytes. */ checksum = ssh_crc32((u_char *) buffer_ptr(&outgoing_packet), buffer_len(&outgoing_packet)); PUT_32BIT(buf, checksum); buffer_append(&outgoing_packet, buf, 4); #ifdef PACKET_DEBUG fprintf(stderr, "packet_send plain: "); buffer_dump(&outgoing_packet); #endif /* Append to output. */ PUT_32BIT(buf, len); buffer_append(&output, buf, 4); buffer_append_space(&output, &cp, buffer_len(&outgoing_packet)); packet_encrypt(&send_context, cp, buffer_ptr(&outgoing_packet), buffer_len(&outgoing_packet)); #ifdef PACKET_DEBUG fprintf(stderr, "encrypted: "); buffer_dump(&output); #endif buffer_clear(&outgoing_packet); /* * Note that the packet is now only buffered in output. It won\'t be * actually sent until packet_write_wait or packet_write_poll is * called. */ } /* * Finalize packet in SSH2 format (compress, mac, encrypt, enqueue) */ static void packet_send2(void) { static u_int32_t seqnr = 0; u_char *macbuf = NULL; char *cp; u_int packet_length = 0; u_int i, padlen, len; u_int32_t rand = 0; int type; Enc *enc = NULL; Mac *mac = NULL; Comp *comp = NULL; int block_size; if (kex != NULL) { enc = &kex->enc[MODE_OUT]; mac = &kex->mac[MODE_OUT]; comp = &kex->comp[MODE_OUT]; } block_size = enc ? enc->cipher->block_size : 8; cp = buffer_ptr(&outgoing_packet); type = cp[5] & 0xff; #ifdef PACKET_DEBUG fprintf(stderr, "plain: "); buffer_dump(&outgoing_packet); #endif if (comp && comp->enabled) { len = buffer_len(&outgoing_packet); /* skip header, compress only payload */ buffer_consume(&outgoing_packet, 5); buffer_clear(&compression_buffer); buffer_compress(&outgoing_packet, &compression_buffer); buffer_clear(&outgoing_packet); buffer_append(&outgoing_packet, "\0\0\0\0\0", 5); buffer_append(&outgoing_packet, buffer_ptr(&compression_buffer), buffer_len(&compression_buffer)); DBG(debug("compression: raw %d compressed %d", len, buffer_len(&outgoing_packet))); } /* sizeof (packet_len + pad_len + payload) */ len = buffer_len(&outgoing_packet); /* * calc size of padding, alloc space, get random data, * minimum padding is 4 bytes */ padlen = block_size - (len % block_size); if (padlen < 4) padlen += block_size; buffer_append_space(&outgoing_packet, &cp, padlen); if (enc && enc->cipher->number != SSH_CIPHER_NONE) { /* random padding */ for (i = 0; i < padlen; i++) { if (i % 4 == 0) rand = arc4random(); cp[i] = rand & 0xff; rand >>= 8; } } else { /* clear padding */ memset(cp, 0, padlen); } /* packet_length includes payload, padding and padding length field */ packet_length = buffer_len(&outgoing_packet) - 4; cp = buffer_ptr(&outgoing_packet); PUT_32BIT(cp, packet_length); cp[4] = padlen & 0xff; DBG(debug("send: len %d (includes padlen %d)", packet_length+4, padlen)); /* compute MAC over seqnr and packet(length fields, payload, padding) */ if (mac && mac->enabled) { macbuf = mac_compute(mac, seqnr, (u_char *) buffer_ptr(&outgoing_packet), buffer_len(&outgoing_packet)); DBG(debug("done calc MAC out #%d", seqnr)); } /* encrypt packet and append to output buffer. */ buffer_append_space(&output, &cp, buffer_len(&outgoing_packet)); packet_encrypt(&send_context, cp, buffer_ptr(&outgoing_packet), buffer_len(&outgoing_packet)); /* append unencrypted MAC */ if (mac && mac->enabled) buffer_append(&output, (char *)macbuf, mac->mac_len); #ifdef PACKET_DEBUG fprintf(stderr, "encrypted: "); buffer_dump(&output); #endif /* increment sequence number for outgoing packets */ if (++seqnr == 0) log("outgoing seqnr wraps around"); buffer_clear(&outgoing_packet); if (type == SSH2_MSG_NEWKEYS) { if (kex==NULL || mac==NULL || enc==NULL || comp==NULL) fatal("packet_send2: no KEX"); if (mac->md != NULL) mac->enabled = 1; DBG(debug("cipher_init send_context")); cipher_init(&send_context, enc->cipher, enc->key, enc->cipher->key_len, enc->iv, enc->cipher->block_size); clear_enc_keys(enc, kex->we_need); if (comp->type != 0 && comp->enabled == 0) { comp->enabled = 1; if (! packet_compression) packet_start_compression(6); } } } void packet_send() { if (use_ssh2_packet_format) packet_send2(); else packet_send1(); DBG(debug("packet_send done")); } /* * Waits until a packet has been received, and returns its type. Note that * no other data is processed until this returns, so this function should not * be used during the interactive session. */ int packet_read(int *payload_len_ptr) { int type, len; fd_set *setp; char buf[8192]; DBG(debug("packet_read()")); setp = (fd_set *)xmalloc(howmany(connection_in+1, NFDBITS) * sizeof(fd_mask)); /* Since we are blocking, ensure that all written packets have been sent. */ packet_write_wait(); /* Stay in the loop until we have received a complete packet. */ for (;;) { /* Try to read a packet from the buffer. */ type = packet_read_poll(payload_len_ptr); if (!use_ssh2_packet_format && ( type == SSH_SMSG_SUCCESS || type == SSH_SMSG_FAILURE || type == SSH_CMSG_EOF || type == SSH_CMSG_EXIT_CONFIRMATION)) packet_integrity_check(*payload_len_ptr, 0, type); /* If we got a packet, return it. */ if (type != SSH_MSG_NONE) { xfree(setp); return type; } /* * Otherwise, wait for some data to arrive, add it to the * buffer, and try again. */ memset(setp, 0, howmany(connection_in + 1, NFDBITS) * sizeof(fd_mask)); FD_SET(connection_in, setp); /* Wait for some data to arrive. */ while (select(connection_in + 1, setp, NULL, NULL, NULL) == -1 && (errno == EAGAIN || errno == EINTR)) ; /* Read data from the socket. */ len = read(connection_in, buf, sizeof(buf)); if (len == 0) { log("Connection closed by %.200s", get_remote_ipaddr()); fatal_cleanup(); } if (len < 0) fatal("Read from socket failed: %.100s", strerror(errno)); /* Append it to the buffer. */ packet_process_incoming(buf, len); } /* NOTREACHED */ } /* * Waits until a packet has been received, verifies that its type matches * that given, and gives a fatal error and exits if there is a mismatch. */ void packet_read_expect(int *payload_len_ptr, int expected_type) { int type; type = packet_read(payload_len_ptr); if (type != expected_type) packet_disconnect("Protocol error: expected packet type %d, got %d", expected_type, type); } /* Checks if a full packet is available in the data received so far via * packet_process_incoming. If so, reads the packet; otherwise returns * SSH_MSG_NONE. This does not wait for data from the connection. * * SSH_MSG_DISCONNECT is handled specially here. Also, * SSH_MSG_IGNORE messages are skipped by this function and are never returned * to higher levels. * * The returned payload_len does include space consumed by: * Packet length * Padding * Packet type * Check bytes */ static int packet_read_poll1(int *payload_len_ptr) { u_int len, padded_len; u_char *ucp; char buf[8], *cp; u_int checksum, stored_checksum; /* Check if input size is less than minimum packet size. */ if (buffer_len(&input) < 4 + 8) return SSH_MSG_NONE; /* Get length of incoming packet. */ ucp = (u_char *) buffer_ptr(&input); len = GET_32BIT(ucp); if (len < 1 + 2 + 2 || len > 256 * 1024) packet_disconnect("Bad packet length %d.", len); padded_len = (len + 8) & ~7; /* Check if the packet has been entirely received. */ if (buffer_len(&input) < 4 + padded_len) return SSH_MSG_NONE; /* The entire packet is in buffer. */ /* Consume packet length. */ buffer_consume(&input, 4); /* Copy data to incoming_packet. */ buffer_clear(&incoming_packet); buffer_append_space(&incoming_packet, &cp, padded_len); packet_decrypt(&receive_context, cp, buffer_ptr(&input), padded_len); buffer_consume(&input, padded_len); #ifdef PACKET_DEBUG fprintf(stderr, "read_poll plain: "); buffer_dump(&incoming_packet); #endif /* Compute packet checksum. */ checksum = ssh_crc32((u_char *) buffer_ptr(&incoming_packet), buffer_len(&incoming_packet) - 4); /* Skip padding. */ buffer_consume(&incoming_packet, 8 - len % 8); /* Test check bytes. */ if (len != buffer_len(&incoming_packet)) packet_disconnect("packet_read_poll: len %d != buffer_len %d.", len, buffer_len(&incoming_packet)); ucp = (u_char *) buffer_ptr(&incoming_packet) + len - 4; stored_checksum = GET_32BIT(ucp); if (checksum != stored_checksum) packet_disconnect("Corrupted check bytes on input."); buffer_consume_end(&incoming_packet, 4); /* If using packet compression, decompress the packet. */ if (packet_compression) { buffer_clear(&compression_buffer); buffer_uncompress(&incoming_packet, &compression_buffer); buffer_clear(&incoming_packet); buffer_append(&incoming_packet, buffer_ptr(&compression_buffer), buffer_len(&compression_buffer)); } /* Get packet type. */ buffer_get(&incoming_packet, &buf[0], 1); /* Return length of payload (without type field). */ *payload_len_ptr = buffer_len(&incoming_packet); /* Return type. */ return (u_char) buf[0]; } static int packet_read_poll2(int *payload_len_ptr) { static u_int32_t seqnr = 0; static u_int packet_length = 0; u_int padlen, need; u_char buf[8], *macbuf; u_char *ucp; char *cp; int type; int maclen, block_size; Enc *enc = NULL; Mac *mac = NULL; Comp *comp = NULL; if (kex != NULL) { enc = &kex->enc[MODE_IN]; mac = &kex->mac[MODE_IN]; comp = &kex->comp[MODE_IN]; } maclen = mac && mac->enabled ? mac->mac_len : 0; block_size = enc ? enc->cipher->block_size : 8; if (packet_length == 0) { /* * check if input size is less than the cipher block size, * decrypt first block and extract length of incoming packet */ if (buffer_len(&input) < block_size) return SSH_MSG_NONE; buffer_clear(&incoming_packet); buffer_append_space(&incoming_packet, &cp, block_size); packet_decrypt(&receive_context, cp, buffer_ptr(&input), block_size); ucp = (u_char *) buffer_ptr(&incoming_packet); packet_length = GET_32BIT(ucp); if (packet_length < 1 + 4 || packet_length > 256 * 1024) { buffer_dump(&incoming_packet); packet_disconnect("Bad packet length %d.", packet_length); } DBG(debug("input: packet len %d", packet_length+4)); buffer_consume(&input, block_size); } /* we have a partial packet of block_size bytes */ need = 4 + packet_length - block_size; DBG(debug("partial packet %d, need %d, maclen %d", block_size, need, maclen)); if (need % block_size != 0) fatal("padding error: need %d block %d mod %d", need, block_size, need % block_size); /* * check if the entire packet has been received and * decrypt into incoming_packet */ if (buffer_len(&input) < need + maclen) return SSH_MSG_NONE; #ifdef PACKET_DEBUG fprintf(stderr, "read_poll enc/full: "); buffer_dump(&input); #endif buffer_append_space(&incoming_packet, &cp, need); packet_decrypt(&receive_context, cp, buffer_ptr(&input), need); buffer_consume(&input, need); /* * compute MAC over seqnr and packet, * increment sequence number for incoming packet */ if (mac && mac->enabled) { macbuf = mac_compute(mac, seqnr, (u_char *) buffer_ptr(&incoming_packet), buffer_len(&incoming_packet)); if (memcmp(macbuf, buffer_ptr(&input), mac->mac_len) != 0) packet_disconnect("Corrupted MAC on input."); DBG(debug("MAC #%d ok", seqnr)); buffer_consume(&input, mac->mac_len); } if (++seqnr == 0) log("incoming seqnr wraps around"); /* get padlen */ cp = buffer_ptr(&incoming_packet) + 4; padlen = *cp & 0xff; DBG(debug("input: padlen %d", padlen)); if (padlen < 4) packet_disconnect("Corrupted padlen %d on input.", padlen); /* skip packet size + padlen, discard padding */ buffer_consume(&incoming_packet, 4 + 1); buffer_consume_end(&incoming_packet, padlen); DBG(debug("input: len before de-compress %d", buffer_len(&incoming_packet))); if (comp && comp->enabled) { buffer_clear(&compression_buffer); buffer_uncompress(&incoming_packet, &compression_buffer); buffer_clear(&incoming_packet); buffer_append(&incoming_packet, buffer_ptr(&compression_buffer), buffer_len(&compression_buffer)); DBG(debug("input: len after de-compress %d", buffer_len(&incoming_packet))); } /* * get packet type, implies consume. * return length of payload (without type field) */ buffer_get(&incoming_packet, (char *)&buf[0], 1); *payload_len_ptr = buffer_len(&incoming_packet); /* reset for next packet */ packet_length = 0; /* extract packet type */ type = (u_char)buf[0]; if (type == SSH2_MSG_NEWKEYS) { if (kex==NULL || mac==NULL || enc==NULL || comp==NULL) fatal("packet_read_poll2: no KEX"); if (mac->md != NULL) mac->enabled = 1; DBG(debug("cipher_init receive_context")); cipher_init(&receive_context, enc->cipher, enc->key, enc->cipher->key_len, enc->iv, enc->cipher->block_size); clear_enc_keys(enc, kex->we_need); if (comp->type != 0 && comp->enabled == 0) { comp->enabled = 1; if (! packet_compression) packet_start_compression(6); } } #ifdef PACKET_DEBUG fprintf(stderr, "read/plain[%d]:\r\n", type); buffer_dump(&incoming_packet); #endif return (u_char)type; } int packet_read_poll(int *payload_len_ptr) { char *msg; for (;;) { int type = use_ssh2_packet_format ? packet_read_poll2(payload_len_ptr): packet_read_poll1(payload_len_ptr); if(compat20) { int reason; if (type != 0) DBG(debug("received packet type %d", type)); switch(type) { case SSH2_MSG_IGNORE: break; case SSH2_MSG_DEBUG: packet_get_char(); msg = packet_get_string(NULL); debug("Remote: %.900s", msg); xfree(msg); msg = packet_get_string(NULL); xfree(msg); break; case SSH2_MSG_DISCONNECT: reason = packet_get_int(); msg = packet_get_string(NULL); log("Received disconnect from %s: %d: %.400s", get_remote_ipaddr(), reason, msg); xfree(msg); fatal_cleanup(); break; default: return type; break; } } else { switch(type) { case SSH_MSG_IGNORE: break; case SSH_MSG_DEBUG: msg = packet_get_string(NULL); debug("Remote: %.900s", msg); xfree(msg); break; case SSH_MSG_DISCONNECT: msg = packet_get_string(NULL); log("Received disconnect from %s: %.400s", get_remote_ipaddr(), msg); fatal_cleanup(); xfree(msg); break; default: if (type != 0) DBG(debug("received packet type %d", type)); return type; break; } } } } /* * Buffers the given amount of input characters. This is intended to be used * together with packet_read_poll. */ void packet_process_incoming(const char *buf, u_int len) { buffer_append(&input, buf, len); } /* Returns a character from the packet. */ u_int packet_get_char() { char ch; buffer_get(&incoming_packet, &ch, 1); return (u_char) ch; } /* Returns an integer from the packet data. */ u_int packet_get_int() { return buffer_get_int(&incoming_packet); } /* * Returns an arbitrary precision integer from the packet data. The integer * must have been initialized before this call. */ void packet_get_bignum(BIGNUM * value, int *length_ptr) { *length_ptr = buffer_get_bignum(&incoming_packet, value); } void packet_get_bignum2(BIGNUM * value, int *length_ptr) { *length_ptr = buffer_get_bignum2(&incoming_packet, value); } char * packet_get_raw(int *length_ptr) { int bytes = buffer_len(&incoming_packet); if (length_ptr != NULL) *length_ptr = bytes; return buffer_ptr(&incoming_packet); } int packet_remaining(void) { return buffer_len(&incoming_packet); } /* * Returns a string from the packet data. The string is allocated using * xmalloc; it is the responsibility of the calling program to free it when * no longer needed. The length_ptr argument may be NULL, or point to an * integer into which the length of the string is stored. */ char * packet_get_string(u_int *length_ptr) { return buffer_get_string(&incoming_packet, length_ptr); } /* * Sends a diagnostic message from the server to the client. This message * can be sent at any time (but not while constructing another message). The * message is printed immediately, but only if the client is being executed * in verbose mode. These messages are primarily intended to ease debugging * authentication problems. The length of the formatted message must not * exceed 1024 bytes. This will automatically call packet_write_wait. */ void packet_send_debug(const char *fmt,...) { char buf[1024]; va_list args; if (compat20 && (datafellows & SSH_BUG_DEBUG)) return; va_start(args, fmt); vsnprintf(buf, sizeof(buf), fmt, args); va_end(args); if (compat20) { packet_start(SSH2_MSG_DEBUG); packet_put_char(0); /* bool: always display */ packet_put_cstring(buf); packet_put_cstring(""); } else { packet_start(SSH_MSG_DEBUG); packet_put_cstring(buf); } packet_send(); packet_write_wait(); } /* * Logs the error plus constructs and sends a disconnect packet, closes the * connection, and exits. This function never returns. The error message * should not contain a newline. The length of the formatted message must * not exceed 1024 bytes. */ void packet_disconnect(const char *fmt,...) { char buf[1024]; va_list args; static int disconnecting = 0; if (disconnecting) /* Guard against recursive invocations. */ fatal("packet_disconnect called recursively."); disconnecting = 1; /* * Format the message. Note that the caller must make sure the * message is of limited size. */ va_start(args, fmt); vsnprintf(buf, sizeof(buf), fmt, args); va_end(args); /* Send the disconnect message to the other side, and wait for it to get sent. */ if (compat20) { packet_start(SSH2_MSG_DISCONNECT); packet_put_int(SSH2_DISCONNECT_PROTOCOL_ERROR); packet_put_cstring(buf); packet_put_cstring(""); } else { packet_start(SSH_MSG_DISCONNECT); packet_put_string(buf, strlen(buf)); } packet_send(); packet_write_wait(); /* Stop listening for connections. */ channel_stop_listening(); /* Close the connection. */ packet_close(); /* Display the error locally and exit. */ log("Disconnecting: %.100s", buf); fatal_cleanup(); } /* Checks if there is any buffered output, and tries to write some of the output. */ void packet_write_poll() { int len = buffer_len(&output); if (len > 0) { len = write(connection_out, buffer_ptr(&output), len); if (len <= 0) { if (errno == EAGAIN) return; else fatal("Write failed: %.100s", strerror(errno)); } buffer_consume(&output, len); } } /* * Calls packet_write_poll repeatedly until all pending output data has been * written. */ void packet_write_wait() { fd_set *setp; setp = (fd_set *)xmalloc(howmany(connection_out + 1, NFDBITS) * sizeof(fd_mask)); packet_write_poll(); while (packet_have_data_to_write()) { memset(setp, 0, howmany(connection_out + 1, NFDBITS) * sizeof(fd_mask)); FD_SET(connection_out, setp); while (select(connection_out + 1, NULL, setp, NULL, NULL) == -1 && (errno == EAGAIN || errno == EINTR)) ; packet_write_poll(); } xfree(setp); } /* Returns true if there is buffered data to write to the connection. */ int packet_have_data_to_write() { return buffer_len(&output) != 0; } /* Returns true if there is not too much data to write to the connection. */ int packet_not_very_much_data_to_write() { if (interactive_mode) return buffer_len(&output) < 16384; else return buffer_len(&output) < 128 * 1024; } /* Informs that the current session is interactive. Sets IP flags for that. */ void packet_set_interactive(int interactive) { static int called = 0; int lowdelay = IPTOS_LOWDELAY; int throughput = IPTOS_THROUGHPUT; int on = 1; if (called) return; called = 1; /* Record that we are in interactive mode. */ interactive_mode = interactive; /* Only set socket options if using a socket. */ if (!packet_connection_is_on_socket()) return; /* * IPTOS_LOWDELAY and IPTOS_THROUGHPUT are IPv4 only */ if (interactive) { /* * Set IP options for an interactive connection. Use * IPTOS_LOWDELAY and TCP_NODELAY. */ if (packet_connection_is_ipv4()) { if (setsockopt(connection_in, IPPROTO_IP, IP_TOS, (void *) &lowdelay, sizeof(lowdelay)) < 0) error("setsockopt IPTOS_LOWDELAY: %.100s", strerror(errno)); } if (setsockopt(connection_in, IPPROTO_TCP, TCP_NODELAY, (void *) &on, sizeof(on)) < 0) error("setsockopt TCP_NODELAY: %.100s", strerror(errno)); } else if (packet_connection_is_ipv4()) { /* * Set IP options for a non-interactive connection. Use * IPTOS_THROUGHPUT. */ if (setsockopt(connection_in, IPPROTO_IP, IP_TOS, (void *) &throughput, sizeof(throughput)) < 0) error("setsockopt IPTOS_THROUGHPUT: %.100s", strerror(errno)); } } /* Returns true if the current connection is interactive. */ int packet_is_interactive() { return interactive_mode; } int packet_set_maxsize(int s) { static int called = 0; if (called) { log("packet_set_maxsize: called twice: old %d new %d", max_packet_size, s); return -1; } if (s < 4 * 1024 || s > 1024 * 1024) { log("packet_set_maxsize: bad size %d", s); return -1; } log("packet_set_maxsize: setting to %d", s); max_packet_size = s; return s; } /* * 9.2. Ignored Data Message * * byte SSH_MSG_IGNORE * string data * * All implementations MUST understand (and ignore) this message at any * time (after receiving the protocol version). No implementation is * required to send them. This message can be used as an additional * protection measure against advanced traffic analysis techniques. */ /* size of current + ignore message should be n*sumlen bytes (w/o mac) */ void packet_inject_ignore(int sumlen) { int blocksize, padlen, have, need, nb, mini, nbytes; Enc *enc = NULL; if (use_ssh2_packet_format == 0) return; have = buffer_len(&outgoing_packet); debug2("packet_inject_ignore: current %d", have); if (kex != NULL) enc = &kex->enc[MODE_OUT]; blocksize = enc ? enc->cipher->block_size : 8; padlen = blocksize - (have % blocksize); if (padlen < 4) padlen += blocksize; have += padlen; have /= blocksize; /* # of blocks for current message */ nb = roundup(sumlen, blocksize) / blocksize; /* blocks for both */ mini = roundup(5+1+4+4, blocksize) / blocksize; /* minsize ignore msg */ need = nb - (have % nb); /* blocks for ignore */ if (need <= mini) need += nb; nbytes = (need - mini) * blocksize; /* size of ignore payload */ debug2("packet_inject_ignore: block %d have %d nb %d mini %d need %d", blocksize, have, nb, mini, need); /* enqueue current message and append a ignore message */ packet_send(); packet_send_ignore(nbytes); } void packet_send_ignore(int nbytes) { u_int32_t rand = 0; int i; packet_start(compat20 ? SSH2_MSG_IGNORE : SSH_MSG_IGNORE); packet_put_int(nbytes); for(i = 0; i < nbytes; i++) { if (i % 4 == 0) rand = arc4random(); packet_put_char(rand & 0xff); rand >>= 8; } }