/* $NetBSD: at24cxx.c,v 1.2 2004/03/11 15:11:53 christos Exp $ */ /* * Copyright (c) 2003 Wasabi Systems, Inc. * All rights reserved. * * Written by Steve C. Woodford and Jason R. Thorpe for Wasabi Systems, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Wasabi Systems, Inc. * 4. The name of Wasabi Systems, Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include #include #include #include #include /* * AT24Cxx EEPROM I2C address: * * 101 0xxx */ #define AT24CXX_ADDRMASK 0x78 #define AT24CXX_ADDR 0x50 #define AT24CXX_WRITE_CYCLE_MS 10 #define AT24CXX_ADDR_HI(a) (((a) >> 8) & 0x1f) #define AT24CXX_ADDR_LO(a) ((a) & 0xff) #include "seeprom.h" #if NSEEPROM > 0 struct seeprom_softc { struct device sc_dev; i2c_tag_t sc_tag; int sc_address; int sc_size; int sc_cmdlen; int sc_open; }; static int seeprom_match(struct device *, struct cfdata *, void *); static void seeprom_attach(struct device *, struct device *, void *); CFATTACH_DECL(seeprom, sizeof(struct seeprom_softc), seeprom_match, seeprom_attach, NULL, NULL); extern struct cfdriver seeprom_cd; dev_type_open(seeprom_open); dev_type_close(seeprom_close); dev_type_read(seeprom_read); dev_type_write(seeprom_write); const struct cdevsw seeprom_cdevsw = { seeprom_open, seeprom_close, seeprom_read, seeprom_write, noioctl, nostop, notty, nopoll, nommap, nokqfilter }; static int seeprom_wait_idle(struct seeprom_softc *); static int seeprom_match(struct device *parent, struct cfdata *cf, void *aux) { struct i2c_attach_args *ia = aux; if ((ia->ia_addr & AT24CXX_ADDRMASK) == AT24CXX_ADDR) return (1); return (0); } static void seeprom_attach(struct device *parent, struct device *self, void *aux) { struct seeprom_softc *sc = (struct seeprom_softc *)self; struct i2c_attach_args *ia = aux; sc->sc_tag = ia->ia_tag; sc->sc_address = ia->ia_addr; aprint_naive(": EEPROM\n"); aprint_normal(": AT24Cxx EEPROM\n"); /* * The AT24C01A/02/04/08/16 EEPROMs use a 1 byte command * word to select the offset into the EEPROM page. The * AT24C04/08/16 decode fewer of the i2c address bits, * using the bottom 1, 2, or 3 to select the 256-byte * super-page. * * The AT24C32/64 EEPROMs use a 2 byte command word and * decode all of the i2c address bits. */ sc->sc_size = ia->ia_size; switch (sc->sc_size) { case 128: /* 1Kbit */ case 256: /* 2Kbit */ case 512: /* 4Kbit */ case 1024: /* 8Kbit */ case 2048: /* 16Kbit */ sc->sc_cmdlen = 1; break; case 4096: /* 32Kbit */ case 8192: /* 64Kbit */ sc->sc_cmdlen = 2; break; default: /* * Default to 2KB. If we happen to have a 2KB * EEPROM this will allow us to access it. If we * have a smaller one, the worst that can happen * is that we end up trying to read a different * EEPROM on the bus when accessing it. * * Obviously this will not work for 4KB or 8KB * EEPROMs, but them's the breaks. */ aprint_error("%s: invalid size specified; " "assuming 2KB (16Kb)\n", sc->sc_dev.dv_xname); sc->sc_size = 2048; sc->sc_cmdlen = 1; } sc->sc_open = 0; } /*ARGSUSED*/ int seeprom_open(dev_t dev, int flag, int fmt, struct proc *p) { struct seeprom_softc *sc; if ((sc = device_lookup(&seeprom_cd, minor(dev))) == NULL) return (ENXIO); /* XXX: Locking */ if (sc->sc_open) return (EBUSY); sc->sc_open = 1; return (0); } /*ARGSUSED*/ int seeprom_close(dev_t dev, int flag, int fmt, struct proc *p) { struct seeprom_softc *sc; if ((sc = device_lookup(&seeprom_cd, minor(dev))) == NULL) return (ENXIO); sc->sc_open = 0; return (0); } /*ARGSUSED*/ int seeprom_read(dev_t dev, struct uio *uio, int flags) { struct seeprom_softc *sc; i2c_addr_t addr; u_int8_t ch, cmdbuf[2]; int a, error; if ((sc = device_lookup(&seeprom_cd, minor(dev))) == NULL) return (ENXIO); if (uio->uio_offset >= sc->sc_size) return (EINVAL); if ((error = iic_acquire_bus(sc->sc_tag, 0)) != 0) return (error); /* * Even though the AT24Cxx EEPROMs support sequential * reads within a page, some I2C controllers do not * support anything other than single-byte transfers, * so we're stuck with this lowest-common-denominator. */ while (uio->uio_resid > 0 && uio->uio_offset < sc->sc_size) { a = (int)uio->uio_offset; if (sc->sc_cmdlen == 1) { addr = sc->sc_address + (a >> 8); cmdbuf[0] = a & 0xff; } else { addr = sc->sc_address; cmdbuf[0] = AT24CXX_ADDR_HI(a); cmdbuf[1] = AT24CXX_ADDR_LO(a); } if ((error = iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, addr, cmdbuf, sc->sc_cmdlen, &ch, 1, 0)) != 0) { iic_release_bus(sc->sc_tag, 0); printf("%s: seeprom_read: byte read failed at 0x%x\n", sc->sc_dev.dv_xname, a); return (error); } if ((error = uiomove(&ch, 1, uio)) != 0) { iic_release_bus(sc->sc_tag, 0); return (error); } } iic_release_bus(sc->sc_tag, 0); return (0); } /*ARGSUSED*/ int seeprom_write(dev_t dev, struct uio *uio, int flags) { struct seeprom_softc *sc; i2c_addr_t addr; u_int8_t ch, cmdbuf[2]; int a, error; if ((sc = device_lookup(&seeprom_cd, minor(dev))) == NULL) return (ENXIO); if (uio->uio_offset >= sc->sc_size) return (EINVAL); if ((error = iic_acquire_bus(sc->sc_tag, 0)) != 0) return (error); /* * See seeprom_read() for why we don't use sequential * writes within a page. */ while (uio->uio_resid > 0 && uio->uio_offset < sc->sc_size) { a = (int)uio->uio_offset; if (sc->sc_cmdlen == 1) { addr = sc->sc_address + (a >> 8); cmdbuf[0] = a & 0xff; } else { addr = sc->sc_address; cmdbuf[0] = AT24CXX_ADDR_HI(a); cmdbuf[1] = AT24CXX_ADDR_LO(a); } if ((error = uiomove(&ch, 1, uio)) != 0) { iic_release_bus(sc->sc_tag, 0); return (error); } if ((error = iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, addr, cmdbuf, sc->sc_cmdlen, &ch, 1, 0)) != 0) { iic_release_bus(sc->sc_tag, 0); printf("%s: seeprom_write: byte write failed at 0x%x\n", sc->sc_dev.dv_xname, a); return (error); } /* Wait until the device commits the byte. */ if ((error = seeprom_wait_idle(sc)) != 0) { iic_release_bus(sc->sc_tag, 0); return (error); } } iic_release_bus(sc->sc_tag, 0); return (0); } static int seeprom_wait_idle(struct seeprom_softc *sc) { uint8_t cmdbuf[2] = { 0, 0 }; int rv, timeout; u_int8_t dummy; timeout = (1000 / hz) / AT24CXX_WRITE_CYCLE_MS; if (timeout == 0) timeout = 1; delay(10); /* * Read the byte at address 0. This is just a dummy * read to wait for the EEPROM's write cycle to complete. */ while (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_address, cmdbuf, sc->sc_cmdlen, &dummy, 1, 0)) { rv = tsleep(sc, PRIBIO | PCATCH, "seepromwr", timeout); if (rv != EWOULDBLOCK) return (rv); } return (0); } #endif /* NSEEPROM > 0 */ int seeprom_bootstrap_read(i2c_tag_t tag, int i2caddr, int offset, int devsize, u_int8_t *rvp, size_t len) { i2c_addr_t addr; int cmdlen; uint8_t cmdbuf[2]; if (len == 0) return (0); /* We are very forgiving about devsize during bootstrap. */ cmdlen = (devsize >= 4096) ? 2 : 1; if (iic_acquire_bus(tag, I2C_F_POLL) != 0) return (-1); while (len) { if (cmdlen == 1) { addr = i2caddr + (offset >> 8); cmdbuf[0] = offset & 0xff; } else { addr = i2caddr; cmdbuf[0] = AT24CXX_ADDR_HI(offset); cmdbuf[1] = AT24CXX_ADDR_LO(offset); } /* Read a single byte. */ if (iic_exec(tag, I2C_OP_READ_WITH_STOP, addr, cmdbuf, cmdlen, rvp, 1, I2C_F_POLL)) { iic_release_bus(tag, I2C_F_POLL); return (-1); } len--; rvp++; offset++; } iic_release_bus(tag, I2C_F_POLL); return (0); }