# # $NetBSD: MILAN-PCIIDE,v 1.6 2001/11/20 11:30:44 lukem Exp $ # # This file was automatically created. Changes will be # lost when running makeconf in this directory. # # Created from: # NetBSD: MILAN.in,v 1.8 2001/11/20 11:29:41 lukem Exp $ # NetBSD: GENERIC.in,v 1.10 2001/11/20 11:29:41 lukem Exp $ #This configuration file is for a generic Milan #Generic atari include "arch/atari/conf/std.milan" #Add support for about 16 users. This variable is used to size #various kernel structures. maxusers 16 options HZ=64 # Set the clock-rate (48/64/96) #X11R6 related options options UCONSOLE # Allow xconsole to work #Standard system options options INSECURE # disable kernel security levels #options NTP # NTP phase/frequency locked loop #(Co)processors this kernel should support options M68040 # support for 040 options M68060 # support for 060 options FPSP # 68040 Floatingpoint support options M060SP # MC68060 software support (Required for 060) #Networking options options INET # IP + ICMP + TCP + UDP options INET6 # IPV6 #options IPSEC # IP security #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) #options IPSEC_DEBUG # debug for IP security #options GATEWAY # packet forwarding #options MROUTING # IP multicast routing options NS # XNS #options NSIP # XNS tunneling over IP options ISO,TPIP # OSI #options EON # OSI tunneling over IP options CCITT,LLC,HDLC # X.25 options NETATALK # AppleTalk networking protocols options PPP_BSDCOMP # BSD-Compress compression support for PPP options PPP_DEFLATE # Deflate compression support for PPP options PPP_FILTER # Active filter support for PPP (requires bpf) options PFIL_HOOKS # pfil(9) packet filter hooks options IPFILTER_LOG # ipmon(8) log support #options IPFILTER_DEFAULT_BLOCK # block packages by default #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG #File systems file-system FFS # Berkeley fast file system file-system MFS # Memory based filesystem file-system KERNFS # Kernel parameter filesystem file-system MSDOSFS # MSDOS filesystem file-system CD9660 # ISO 9660 filesystem with Rock Ridge file-system NFS # Network File System client side code file-system PROCFS # Process filesystem file-system FDESC # /dev/fd file-system NULLFS # Loopback filesystem file-system OVERLAY # overlay filesystem file-system UNION # union file system file-system UMAPFS # null file system (with uid & gid remapping) file-system PORTAL # portal file system file-system EXT2FS # second extended file system (linux) file-system LFS # log-structured file system #File system options options QUOTA # Disk quotas for local disks #options FFS_EI # FFS Endian Independant support options SOFTDEP # FFS soft updates support. options NFSSERVER # Network File System server side code #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and # immutable) behave as system flags. #Misc. debugging options options PANICWAIT # Require keystroke to dump/reboot options DDB # Kernel debugger options DDB_HISTORY_SIZE=100 # Enable history editing in DDB #options DEBUG # expensive debugging checks/support #Compatibility options for various existing systems options COMPAT_43 # 4.3 BSD compatible system calls (required) options COMPAT_10 # Compatibility to NetBSD1.0 options COMPAT_11 # Compatibility to NetBSD1.1 options COMPAT_12 # Compatibility to NetBSD1.2 options COMPAT_13 # Compatibility to NetBSD1.3 options COMPAT_14 # Compatibility to NetBSD1.4 #options COMPAT_09 # has no meaning on the atari #options COMPAT_SUNOS # Support to run Sun-3 executables #options COMPAT_SVR4 # Support to run SVR4 executables #options COMPAT_LINUX # Support to run Linux/m68k executables #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. options COMPAT_AOUT_M68K # Compatibility to a.out executables options EXEC_AOUT # a.out format executables #Support for System V IPC facilities. options SYSVSHM # System V shared memory options SYSVMSG # System V messages options SYSVSEM # System V semaphores #options SEMMNI=10 # number of semaphore identifiers #options SEMUME=10 # max number of undo entries per proc. #options SEMMNU=30 # number of undo structures in system #Support for various kernel options options KTRACE # Add kernel tracing system call options DIAGNOSTIC # Add additional error checking code #These options enable verbose messages for several subsystems. #Warning, these may compile large string tables into the kernel! options SCSIVERBOSE # human readable SCSI error messages options PCIVERBOSE # verbose PCI device autoconfig messages #options PCI_CONFIG_DUMP # verbosely dump PCI config space #Atari specific options #options KFONT_8x8 # Use 8x8 font instead of 8x16 options ST_POOL_SIZE=22 # smallest that allows TT-HIGH options MEMORY_DISK_HOOKS # Boot RAM-disk options DISKLABEL_NBDA # NetBSD disklabels (required) options DISKLABEL_AHDI # NetBSD/AHDI disklabels options SERCONSOLE # modem1 console support options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM options STATCLOCK # Separate {stat,prof}clock #Try linked commands on all targets options TRY_SCSI_LINKED_COMMANDS=0x7f #Build one kernel that can boot from any disk. config netbsd root on ? type ? pseudo-device sl # Slip pseudo-device ppp # ppp pseudo-device pty # pseudo-terminals pseudo-device loop # Loopback network pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) pseudo-device md 2 # Boot memory disk pseudo-device bpfilter 2 # berkeley packet filters pseudo-device tun 2 # network tunnel #pseudo-device gre 2 # generic L3 over IP tunnel pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) #pseudo-device faith 1 # IPv[46] tcp relay translation i/f #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation pseudo-device vlan # IEEE 802.1q encapsulation #pseudo-device bridge # simple inter-network bridging pseudo-device ccd 4 # concatenating disk driver #pseudo-device raid 4 # RAIDframe disk driver #options RAID_AUTOCONFIG # auto-configuration of RAID components pseudo-device ipfilter # IP filtering device pseudo-device rnd # /dev/random and in-kernel generator #Hardware options for GENERIC are in the various machine type specific files #For the moment, the MILAN will be the only one to use wscons, so define #the wscons options here too for the moment. #wscons options #builtin terminal emulations #options WSEMUL_SUN # sun terminal emulation options WSEMUL_VT100 # VT100 / VT220 emulation #different kernel output - see dev/wscons/wsdisplayvar.h #XXX: Since the Milan VGA works in monochrome for the moment, _only_ #use black and white here! options WS_KERNEL_FG=WSCOL_WHITE options WS_KERNEL_BG=WSCOL_BLACK #compatibility to other console drivers #options WSDISPLAY_COMPAT_USL # VT handling #options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes #see dev/pckbc/wskbdmap_mfii.c for implemented layouts #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" #allocate a number of virtual screens at autoconfiguration time options WSDISPLAY_DEFAULTSCREENS=4 #use a large software cursor that doesn't blink options PCDISPLAY_SOFTCURSOR #modify the screen type of the console; defaults to "80x25" #options VGA_CONSOLE_SCREENTYPE="\"80x25\"" #The following sections describe various hardware options. isabus0 at mainbus0 # ISA-bus isa0 at isabus0 pcibus0 at mainbus0 # PCI-bus pci0 at pcibus0 ser0 at mainbus0 fdcisa0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy contr. fdisa0 at fdcisa0 drive 0 #Ok, the stuff below requires some explanation... #Initially, when Atari started with IDE on the Falcon, they decided to #swap the bytelanes on the IDE controller. So all data on the disk was #byteswapped and all CDROM drivers had to byteswap the data to make #this nice idea work... To remain compatible with the 'current' drivers, #this scheme was adopted by the Hades hardware (hence wdc_mb.c). On the Milan #however, the change was reverted. But... now the hardware is connected to #a little endian (ISA) bus, in PIO mode this is essentially the same as #swapping the bytelanes. The fun starts when you use the PCIIDE DMA mode #provided by the PCI_ISA bridge on the Milan. CDROM's are OK, but the data #on the disk is swapped :-( Now luckily, both the Milan and HDDRIVER #developers have thought up a solution, you can make a byteswapped disk #during the partioning with HDDRIVER and TOS supports booting from it! #Ok, now you have to choose: #- If _none_ of your disks are marked byteswapped by HDDRIVER, choose #the MILAN_ISAIDE version. #- If _all_ of your disks are byteswapped, use the 1 version #The is no way to mix things! pciide* at pci? dev ? function ? flags 0x0000 # 2 PCIIDE channels wd* at pciide? channel ? drive ? flags 0x0000 atapibus* at pciide? channel ? # ATAPI bus support #The Milan uses wscons #XXX without the __HAVE_NWSCONS option, the keyboard won't work... options __HAVE_NWSCONS vga0 at pci? dev ? function ? # a PCI VGA card wsdisplay* at vga? console ? # as a wscons console pckbc0 at isa? # PC keyboard controller pckbd* at pckbc? # PC keyboard wskbd* at pckbd? console ? # wscons keyboard #ATAPI devices cd* at atapibus? drive ? # ATAPI CD-ROM drives