# $NetBSD: INSTALL,v 1.7 1998/09/07 14:11:08 minoura Exp $ # # INSTALL -- installation kernel. # include "arch/x68k/conf/std.x68k" maxusers 16 ## Enable the hooks used for initializing the memory-disk. options MEMORY_DISK_HOOKS options MEMORY_DISK_IS_ROOT # Force root on memory-disk options MEMORY_DISK_SERVER=0 # No user space hooks options MINIROOTSIZE=3074 #options MINIROOTSIZE=2880 # 1.44M, same as a floppy ## System kernel configuration. See options(4) for more detail. ## Options for variants of the m68k MPU ## you must have at least the correct one; REQUIRED options M68030 options M68040 options M68060 #### System options specific to the x68k port #options UVM # new virtual memory system #options MACHINE_NONCONTIG # support for noncontiguous memory #options MACHINE_NEW_NONCONTIG # new i/f for noncontig memory support options FPU_EMULATE # software fpu emulation for MC68030 options FPSP # floating point emulation for MC68040 options M060SP # int/fp emulation for MC68060 options JUPITER # support for "Jupiter-X" accelerator options MAPPEDCOPY # use page mapping for large copyin/copyout options EIOMAPSIZE=0 # do not map PCI address space #### System options that are the same for all ports ## Root device configuration: change the ?'s if you are going to use a ## nonstandard root partition (other than where the kernel is booted from) ## and/or nonstandard root type (not ffs or nfs). Normally this can be ## automagically determined at boot time. config netbsd root on ? type ? ## RTC is offset from GMT; -540 means JST-9 options RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT ## System call tracing (see ktrace(1)). #options KTRACE ## Collect statistics on kernel malloc's and free's. This does have a ## significant performance hit on slower machines, so it is intended for ## diagnostic use only. #options KMEMSTATS ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) #options SYSVMSG # System V message queues #options SYSVSEM # System V semaphores #options SYSVSHM # System V shared memory #options SHMMAXPGS=1024 # 1024 pages is the default ## Loadable kernel module support #options LKM ## NFS boot options; not supported currently: needs nfsboot program #options NFS_BOOT_BOOTPARAM #options NFS_BOOT_BOOTP #options NFS_BOOT_DHCP #### Debugging options ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at ## serial console break or keyboard reset, where the PROM would normally ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. #options DDB # kernel dynamic debugger #options DDB_HISTORY_SIZE=100 # enable history editing in DDB #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' #options PANICBUTTON # interrupt switch invokes DDB ## You may also use gdb, on another computer connected to this machine over ## a serial port. Both KGDBDEV and KGDBRATE should be specified; KGDBDEV is ## a dev_t encoded device number of the serial port to use. ## KGDB is not supported for now. #options KGDB # support for kernel gdb #options KGDBDEV=0xc00 # kgdb device number #options KGDBRATE=9600 # baud rate ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), ## such that gdb(1) can be used on a kernel coredump. #makeoptions DEBUG="-g" ## Adds code to the kernel that does internal consistency checks, and will ## cause the kernel to panic if corruption of internal data structures ## is detected. #options DIAGNOSTIC # extra kernel sanity checking ## Enable (possibly expensive) debugging code that may also display messages ## on the system console #options DEBUG ## Make SCSI error messages more verbose when explaining their meanings. #options SCSIVERBOSE ## `INSECURE' turns off the kernel security level (securelevel = 0 always). ## This allows writing to /dev/mem, loading kernel modules while multi-user, ## and other insecurities good only for development work. Do not use this ## option on a production machine. #options INSECURE ## Allow non-root users to grab /dev/console with programs such as xconsole. ## `xconsole' therefore does not need setuid root with this option enabled. #options UCONSOLE ## `FDSCRIPTS' allows non-readable but executable scripts by providing a ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same ## opaque file mechanism. Perl calls this "secure setuid scripts." #options FDSCRIPTS #options SETUIDSCRIPTS ## Options for compatibility with previous releases foreign system binaries. options COMPAT_43 # 4.3BSD system interfaces #options COMPAT_09 # NetBSD 0.9 binary compatibility #options COMPAT_10 # NetBSD 1.0 binary compatibility #options COMPAT_11 # NetBSD 1.1 binary compatibility #options COMPAT_12 # NetBSD 1.2 binary compatibility #options COMPAT_13 # NetBSD 1.3 binary compatibility #options COMPAT_M68K4K # NetBSD/m68k4k binaries #options COMPAT_SUNOS # SunOS 4.x binary compatibility; broken ## File systems. file-system FFS # Berkeley Fast Filesystem file-system NFS # Sun NFS-compatible filesystem client file-system KERNFS # kernel data-structure filesystem #file-system NULLFS # NULL layered filesystem file-system MFS # memory-based filesystem #file-system FDESC # user file descriptor filesystem #file-system UMAPFS # uid/gid remapping filesystem #file-system LFS # Log-based filesystem (still experimental) #file-system PORTAL # portal filesystem (still experimental) file-system PROCFS # /proc file-system CD9660 # ISO 9660 + Rock Ridge file system #file-system UNION # union file system file-system MSDOSFS # MS-DOS FAT filesystem(s). #file-system ADOSFS # AmigaDOS filesystem ## File system options. #options NFSSERVER # Sun NFS-compatible filesystem server #options QUOTA # FFS quotas #options FFS_EI # FFS Endian Independent support ## Network protocol support. In most environments, INET is required. options INET # IP (Internet Protocol) v4 options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility #options GATEWAY # packet forwarding ("router switch") #options MROUTING # packet forwarding of multicast packets #options DIRECTED_BROADCAST # allow broadcasts through routers #options NS # Xerox NS networking #options NSIP # Xerox NS tunneling over IP #options ISO,TPIP # OSI networking #options EON # OSI tunneling over IP #options CCITT,LLC,HDLC # X.25 packet switched protocol #options NETATALK # AppleTalk (over Ethernet) protocol #options NTP # Network Time Protocol in-kernel support #options PPS_SYNC # Add serial line synchronization for NTP #options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. #options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device #options PPP_BSDCOMP # Add BSD compression to ppp device #options PPP_DEFLATE # Add deflate (libz) compression to ppp device #options PPP_FILTER # Add active filters for ppp (via bpf) #### Device configurations ## Fundamental devices mainbus0 at root # MANDATORY ## Display devices and console grfbus0 at mainbus0 # bitmapped displays grf0 at grfbus0 # multiplane graphics #grf1 at grfbus0 # flexible graphics ite0 at grf0 # internal terminal emulator pseudo-device kbd # standard keyboard #pseudo-device pow 2 # software power switch ## floppy disks fdc0 at mainbus0 # floppy controller fd* at fdc0 unit ? # builtin floppy drives ## SCSI devices spc0 at mainbus0 # builtin scsi spc1 at mainbus0 # external scsi scsibus* at spc? mha0 at mainbus0 # MK-HA1 mach-2 SCSI scsibus* at mha0 sd* at scsibus? target ? lun ? # SCSI disks cd* at scsibus? target ? lun ? # SCSI CD-ROMs st* at scsibus? target ? lun ? # SCSI tapes #ss* at scsibus? target ? lun ? # SCSI scanners #ch* at scsibus? target ? lun ? # SCSI changer devices #uk* at scsibus? target ? lun ? # SCSI unknown devices ## Serial ports zsc0 at mainbus0 zstty0 at zsc0 channel 0 # built-in RS-232C #ms0 at zsc0 channel 1 # standard mouse #zsc1 at mainbus0 #zstty2 at zsc1 channel 0 #zstty3 at zsc1 channel 1 #zsc2 at mainbus0 #zstty4 at zsc2 channel 0 #zstty5 at zsc2 channel 1 #xcom0 at mainbus0 # NS16550 fast serial #xcom1 at mainbus0 #pseudo-device sram # battery-backuped static RAM #pseudo-device bell # OPM bell ## Audio device; broken #okiadpcm0 at mainbus0 #audio* at okiadpcm* ## Network interfaces ed0 at mainbus0 # Neptune-X #se0 at scsibus? target ? lun ? # Ether+; not supported #### Pseudo devices ## A disk-like interface to files. Can be used to create floppy, CD, ## miniroot images, etc. pseudo-device vnd 4 ## Concatenated and striped disks; with this, you can create a software-based ## disk array similar to a "RAID 0" setup. See ccd(4). pseudo-device ccd 4 ## Memory disk device, used on boot floppies with compressed ## kernel-plus-root-disk images. pseudo-device md 1 ## Loopback network interface; required pseudo-device loop ## SLIP and CSLIP interfaces, for IP over a serial line. pseudo-device sl 1 ## PPP, the successor to SLIP. See pppd(8). pseudo-device ppp 1 ## Network "tunnel" device, allowing protocol stacks to run in the userland. ## This is used by the third-party user-mode "ppp" program, and others. #pseudo-device tun 4 ## Berkeley Packet Filter, required to run RARPD. A generic C-language ## interface that allows selective examining of incoming packets. #pseudo-device bpfilter 8 ## IP Filter, used in firewall and NAT applications. See ipnat(8) for ## one example of the use of the IP Filter. #pseudo-device ipfilter #### Other device configuration ## Pseudo ttys, required for network logins and programs like screen. ## 32 is a good number for average systems; you may have as many as you ## like, though 256 is more or less the upper limit. Increasing this ## number still requires you to run /dev/MAKEDEV to create the files ## for the ptys. pseudo-device pty 8 # pseudo-ttys (for network, etc.) ## Random device, used to implement /dev/random (a source of random noise), ## and generate randomness for some kernel formulae. ## THIS DEVICE IS EXPERIMENTAL; use at your own risk. #pseudo-device rnd