/* $NetBSD: tulipreg.h,v 1.15 2000/01/22 21:05:53 thorpej Exp $ */ /*- * Copyright (c) 1999 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, * NASA Ames Research Center. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_IC_TULIPREG_H_ #define _DEV_IC_TULIPREG_H_ /* * Register description for the Digital Semiconductor ``Tulip'' (21x4x) * Ethernet controller family, and a variety of clone chips, including: * * - Macronix 98713, 98713A, 98715, 98715A, 98725 (PMAC): * * These chips are fairly straight-forward Tulip clones. * The 98713 is a very close 21140A clone. It has GPR * and MII media, and a GPIO facility, and uses the ISV * SROM format (or, at least, should, because of the GPIO * facility). The 98713A has MII, no GPIO facility, and * an internal NWay block. The 98715, 98715A, and 98725 * have only GPR media and the NWay block. The 98715, * 98715A, and 98725 support power management. * * - Lite-On 82C115 (PNIC II): * * A clone of the Macronix MX98725, with the following differences: * * - Wake-On-LAN support * - 128-bit multicast hash table rather than the * standard 512-bit hash table * - 802.3x flow control * * - Lite-On 82C168, 82C169 (PNIC): * * Pretty close, with only a few minor differences: * * - EEPROM is accessed completely differently. * - MII is accessed completely differently. * - No SIO facility (due to the above two differences). * - GPIO interface is different than the 21140's. * - Boards that lack PHYs use the internal NWay block * and transciever. * * - Winbond 89C840F * * Less similar, but still roughly compatible (enough so * that the driver can be adapted, at least): * * - Registers lack the pad word between them. * - Instead of a setup frame, there are two station * address registers and two multicast hash table * registers (64-bit multicast hash table). * - Only supported media interface is MII-over-SIO. * - Different OPMODE register bits for various things * (mostly media related). * * - ADMtek AL981 * * Another pretty-close clone: * * - Wake-On-LAN support * - Instead of a setup frame, there are two station * address registers and two multicast hash table * registers (64-bit multicast hash table). * - 802.3x flow control * - Only supported media interface is built-in PHY * which is accessed through a set of special registers. * - Not all registers have the pad word between them, * but luckily, there are all AL981-specific registers, * so this is easy to deal with. * * Some of the clone chips have different registers, and some have * different bits in the same registers. These will be denoted by * PMAC, PNICII, PNIC, WINB, and ADM in the register/bit names. */ /* * Tulip buffer descriptor. Must be 4-byte aligned. * * Note for receive descriptors, the byte count fields must * be a multiple of 4. */ struct tulip_desc { __volatile u_int32_t td_status; /* Status */ __volatile u_int32_t td_ctl; /* Control and Byte Counts */ __volatile u_int32_t td_bufaddr1; /* Buffer Address 1 */ __volatile u_int32_t td_bufaddr2; /* Buffer Address 2 */ }; /* * Descriptor Status bits common to transmit and receive. */ #define TDSTAT_OWN 0x80000000 /* Tulip owns descriptor */ #define TDSTAT_ES 0x00008000 /* Error Summary */ /* * Descriptor Status bits for Receive Descriptor. */ #define TDSTAT_Rx_FF 0x40000000 /* Filtering Fail */ #define TDSTAT_WINB_Rx_RCMP 0x40000000 /* Receive Complete */ #define TDSTAT_Rx_FL 0x3fff0000 /* Frame Length including CRC */ #define TDSTAT_Rx_DE 0x00004000 /* Descriptor Error */ #define TDSTAT_Rx_DT 0x00003000 /* Data Type */ #define TDSTAT_Rx_RF 0x00000800 /* Runt Frame */ #define TDSTAT_Rx_MF 0x00000400 /* Multicast Frame */ #define TDSTAT_Rx_FS 0x00000200 /* First Descriptor */ #define TDSTAT_Rx_LS 0x00000100 /* Last Descriptor */ #define TDSTAT_Rx_TL 0x00000080 /* Frame Too Long */ #define TDSTAT_Rx_CS 0x00000040 /* Collision Seen */ #define TDSTAT_Rx_RT 0x00000020 /* Frame Type */ #define TDSTAT_Rx_RW 0x00000010 /* Receive Watchdog */ #define TDSTAT_Rx_RE 0x00000008 /* Report on MII Error */ #define TDSTAT_Rx_DB 0x00000004 /* Dribbling Bit */ #define TDSTAT_Rx_CE 0x00000002 /* CRC Error */ #define TDSTAT_Rx_ZER 0x00000001 /* Zero (always 0) */ #define TDSTAT_Rx_LENGTH(x) (((x) & TDSTAT_Rx_FL) >> 16) #define TDSTAT_Rx_DT_SR 0x00000000 /* Serial Received Frame */ #define TDSTAT_Rx_DT_IL 0x00001000 /* Internal Loopback Frame */ #define TDSTAT_Rx_DT_EL 0x00002000 /* External Loopback Frame */ #define TDSTAT_Rx_DT_r 0x00003000 /* Reserved */ /* * Descriptor Status bits for Transmit Descriptor. */ #define TDSTAT_WINB_Tx_TE 0x00008000 /* Transmit Error */ #define TDSTAT_Tx_TO 0x00004000 /* Transmit Jabber Timeout */ #define TDSTAT_Tx_LO 0x00000800 /* Loss of Carrier */ #define TDSTAT_Tx_NC 0x00000400 /* No Carrier */ #define TDSTAT_Tx_LC 0x00000200 /* Late Collision */ #define TDSTAT_Tx_EC 0x00000100 /* Excessive Collisions */ #define TDSTAT_Tx_HF 0x00000080 /* Heartbeat Fail */ #define TDSTAT_Tx_CC 0x00000078 /* Collision Count */ #define TDSTAT_Tx_LF 0x00000004 /* Link Fail */ #define TDSTAT_Tx_UF 0x00000002 /* Underflow Error */ #define TDSTAT_Tx_DE 0x00000001 /* Deferred */ #define TDSTAT_Tx_COLLISIONS(x) (((x) & TDSTAT_Tx_CC) >> 3) /* * Descriptor Control bits common to transmit and receive. */ #define TDCTL_SIZE1 0x000007ff /* Size of buffer 1 */ #define TDCTL_SIZE1_SHIFT 0 #define TDCTL_SIZE2 0x003ff800 /* Size of buffer 2 */ #define TDCTL_SIZE2_SHIFT 11 #define TDCTL_ER 0x02000000 /* End of Ring */ #define TDCTL_CH 0x01000000 /* Second Address Chained */ /* * Descriptor Control bits for Transmit Descriptor. */ #define TDCTL_Tx_IC 0x80000000 /* Interrupt on Completion */ #define TDCTL_Tx_LS 0x40000000 /* Last Segment */ #define TDCTL_Tx_FS 0x20000000 /* First Segment */ #define TDCTL_Tx_FT1 0x10000000 /* Filtering Type 1 */ #define TDCTL_Tx_SET 0x08000000 /* Setup Packet */ #define TDCTL_Tx_AC 0x04000000 /* Add CRC Disable */ #define TDCTL_Tx_DPD 0x00800000 /* Disabled Padding */ #define TDCTL_Tx_FT0 0x00400000 /* Filtering Type 0 */ /* * The Tulip filter is programmed by "transmitting" a Setup Packet * (indicated by TDCTL_Tx_SET). The filtering type is indicated * as follows: * * FT1 FT0 Description * --- --- ----------- * 0 0 Perfect Filtering: The Tulip interprets the * descriptor buffer as a table of 16 MAC addresses * that the Tulip should receive. * * 0 1 Hash Filtering: The Tulip interprets the * descriptor buffer as a 512-bit hash table * plus one perfect address. If the incoming * address is Multicast, the hash table filters * the address, else the address is filtered by * the perfect address. * * 1 0 Inverse Filtering: Like Perfect Filtering, except * the table is addresses that the Tulip does NOT * receive. * * 1 1 Hash-only Filtering: Like Hash Filtering, but * physical addresses are matched by the hash table * as well, and not by matching a single perfect * address. * * A Setup Packet must always be 192 bytes long. The Tulip can store * 16 MAC addresses. If not all 16 are specified in Perfect Filtering * or Inverse Filtering mode, then unused entries should duplicate * one of the valid entries. */ #define TDCTL_Tx_FT_PERFECT 0 #define TDCTL_Tx_FT_HASH TDCTL_Tx_FT0 #define TDCTL_Tx_FT_INVERSE TDCTL_Tx_FT1 #define TDCTL_Tx_FT_HASHONLY (TDCTL_Tx_FT1|TDCTL_Tx_FT0) #define TULIP_SETUP_PACKET_LEN 192 #define TULIP_MAXADDRS 16 #define TULIP_MCHASHSIZE 512 #define TULIP_PNICII_HASHSIZE 128 /* * Maximum size of a Tulip Ethernet Address ROM or SROM. */ #define TULIP_ROM_SIZE(bits) (2 << (bits)) #define TULIP_MAX_ROM_SIZE 512 /* * Format of the standard Tulip SROM information: * * Byte offset Size Usage * 0 18 reserved * 18 1 SROM Format Version * 19 1 Chip Count * 20 6 IEEE Network Address * 26 1 Chip 0 Device Number * 27 2 Chip 0 Info Leaf Offset * 29 1 Chip 1 Device Number * 30 2 Chip 1 Info Leaf Offset * 32 1 Chip 2 Device Number * 33 2 Chip 2 Info Leaf Offset * ... 1 Chip n Device Number * ... 2 Chip n Info Leaf Offset * ... ... ... * Chip Info Leaf Information * ... * ... * ... * 126 2 CRC32 checksum */ #define TULIP_ROM_SROM_FORMAT_VERION 18 /* B */ #define TULIP_ROM_CHIP_COUNT 19 /* B */ #define TULIP_ROM_IEEE_NETWORK_ADDRESS 20 #define TULIP_ROM_CHIPn_DEVICE_NUMBER(n) (26 + ((n) * 3))/* B */ #define TULIP_ROM_CHIPn_INFO_LEAF_OFFSET(n) (27 + ((n) * 3))/* W */ #define TULIP_ROM_CRC32_CHECKSUM 126 /* W */ #define TULIP_ROM_CRC32_CHECKSUM1 94 /* W */ #define TULIP_ROM_IL_SELECT_CONN_TYPE 0 /* W */ #define TULIP_ROM_IL_MEDIA_COUNT 2 /* B */ #define TULIP_ROM_IL_MEDIAn_BLOCK_BASE 3 #define SELECT_CONN_TYPE_TP 0x0000 #define SELECT_CONN_TYPE_BNC 0x0001 #define SELECT_CONN_TYPE_AUI 0x0002 #define SELECT_CONN_TYPE_100TX 0x0003 #define SELECT_CONN_TYPE_100T4 0x0006 #define SELECT_CONN_TYPE_100FX 0x0007 #define SELECT_CONN_TYPE MII_10T 0x0009 #define SELECT_CONN_TYPE_MII_100TX 0x000d #define SELECT_CONN_TYPE_MII_100T4 0x000f #define SELECT_CONN_TYPE_MII_100FX 0x0010 #define SELECT_CONN_TYPE_TP_AUTONEG 0x0100 #define SELECT_CONN_TYPE_TP_FDX 0x0204 #define SELECT_CONN_TYPE_MII_10T_FDX 0x020a #define SELECT_CONN_TYPE_100TX_FDX 0x020e #define SELECT_CONN_TYPE_MII_100TX_FDX 0x0211 #define SELECT_CONN_TYPE_TP_NOLINKPASS 0x0400 #define SELECT_CONN_TYPE_ASENSE 0x0800 #define SELECT_CONN_TYPE_ASENSE_POWERUP 0x8800 #define SELECT_CONN_TYPE_ASENSE_AUTONEG 0x0900 #define TULIP_ROM_MB_MEDIA_CODE 0x3f #define TULIP_ROM_MB_MEDIA_TP 0x00 #define TULIP_ROM_MB_MEDIA_BNC 0x01 #define TULIP_ROM_MB_MEDIA_AUI 0x02 #define TULIP_ROM_MB_MEDIA_100TX 0x03 #define TULIP_ROM_MB_MEDIA_TP_FDX 0x04 #define TULIP_ROM_MB_MEDIA_100TX_FDX 0x05 #define TULIP_ROM_MB_MEDIA_100T4 0x06 #define TULIP_ROM_MB_MEDIA_100FX 0x07 #define TULIP_ROM_MB_MEDIA_100FX_FDX 0x08 #define TULIP_ROM_MB_EXT 0x40 #define TULIP_ROM_MB_CSR13 1 /* W */ #define TULIP_ROM_MB_CSR14 3 /* W */ #define TULIP_ROM_MB_CSR15 5 /* W */ #define TULIP_ROM_MB_SIZE(mc) (((mc) & TULIP_ROM_MB_EXT) ? 7 : 1) #define TULIP_ROM_MB_NOINDICATOR 0x8000 #define TULIP_ROM_MB_DEFAULT 0x4000 #define TULIP_ROM_MB_POLARITY 0x0080 #define TULIP_ROM_MB_OPMODE(x) (((x) & 0x71) << 18) #define TULIP_ROM_MB_BITPOS(x) (1 << (((x) & 0x0e) >> 1)) #define TULIP_ROM_MB_21140_GPR 0 /* 21140[A] GPR block */ #define TULIP_ROM_MB_21140_MII 1 /* 21140[A] MII block */ #define TULIP_ROM_MB_21142_SIA 2 /* 2114[23] SIA block */ #define TULIP_ROM_MB_21142_MII 3 /* 2114[23] MII block */ #define TULIP_ROM_MB_21143_SYM 4 /* 21143 SYM block */ #define TULIP_ROM_MB_21143_RESET 5 /* 21143 reset block */ #define TULIP_ROM_GETW(data, off) ((data)[(off)] | ((data)[(off) + 1]) << 8) /* * Tulip control registers. */ #define TULIP_CSR0 0x00 #define TULIP_CSR1 0x08 #define TULIP_CSR2 0x10 #define TULIP_CSR3 0x18 #define TULIP_CSR4 0x20 #define TULIP_CSR5 0x28 #define TULIP_CSR6 0x30 #define TULIP_CSR7 0x38 #define TULIP_CSR8 0x40 #define TULIP_CSR9 0x48 #define TULIP_CSR10 0x50 #define TULIP_CSR11 0x58 #define TULIP_CSR12 0x60 #define TULIP_CSR13 0x68 #define TULIP_CSR14 0x70 #define TULIP_CSR15 0x78 #define TULIP_CSR16 0x80 #define TULIP_CSR17 0x88 #define TULIP_CSR18 0x90 #define TULIP_CSR19 0x98 #define TULIP_CSR20 0xa0 #define TULIP_CSR21 0xa8 #define TULIP_CSR22 0xb0 #define TULIP_CSR23 0xb8 #define TULIP_CSR24 0xc0 #define TULIP_CSR25 0xc8 #define TULIP_CSR26 0xd0 #define TULIP_CSR27 0xd8 #define TULIP_CSR28 0xe0 #define TULIP_CSR29 0xe8 #define TULIP_CSR30 0xf0 #define TULIP_CSR31 0xf8 #define TULIP_CSR_INDEX(csr) ((csr) >> 3) /* CSR0 - Bus Mode */ #define CSR_BUSMODE TULIP_CSR0 #define BUSMODE_SWR 0x00000001 /* software reset */ #define BUSMODE_BAR 0x00000002 /* bus arbitration */ #define BUSMODE_DSL 0x0000007c /* descriptor skip length */ #define BUSMODE_BLE 0x00000080 /* big endian */ /* programmable burst length */ #define BUSMODE_PBL_DEFAULT 0x00000000 /* default value */ #define BUSMODE_PBL_1LW 0x00000100 /* 1 longword */ #define BUSMODE_PBL_2LW 0x00000200 /* 2 longwords */ #define BUSMODE_PBL_4LW 0x00000400 /* 4 longwords */ #define BUSMODE_PBL_8LW 0x00000800 /* 8 longwords */ #define BUSMODE_PBL_16LW 0x00001000 /* 16 longwords */ #define BUSMODE_PBL_32LW 0x00002000 /* 32 longwords */ /* cache alignment */ #define BUSMODE_CAL_NONE 0x00000000 /* no alignment */ #define BUSMODE_CAL_8LW 0x00004000 /* 8 longwords */ #define BUSMODE_CAL_16LW 0x00008000 /* 16 longwords */ #define BUSMODE_CAL_32LW 0x0000c000 /* 32 longwords */ #define BUSMODE_DAS 0x00010000 /* diagnostic address space */ /* must be zero on most */ /* transmit auto-poll */ /* * Transmit auto-polling not supported on: * Winbond 89C040F */ #define BUSMODE_TAP_NONE 0x00000000 /* no auto-polling */ #define BUSMODE_TAP_200us 0x00020000 /* 200 uS */ #define BUSMODE_TAP_800us 0x00040000 /* 400 uS */ #define BUSMODE_TAP_1_6ms 0x00060000 /* 1.6 mS */ #define BUSMODE_TAP_12_8us 0x00080000 /* 12.8 uS (21041+) */ #define BUSMODE_TAP_25_6us 0x000a0000 /* 25.6 uS (21041+) */ #define BUSMODE_TAP_51_2us 0x000c0000 /* 51.2 uS (21041+) */ #define BUSMODE_TAP_102_4us 0x000e0000 /* 102.4 uS (21041+) */ #define BUSMODE_DBO 0x00100000 /* desc-only b/e (21041+) */ #define BUSMODE_RME 0x00200000 /* rd/mult enab (21140+) */ #define BUSMODE_WINB_WAIT 0x00200000 /* wait state insertion */ #define BUSMODE_RLE 0x00800000 /* rd/line enab (21140+) */ #define BUSMODE_WLE 0x01000000 /* wt/line enab (21140+) */ #define BUSMODE_PNIC_MBO 0x04000000 /* magic `must be one' bit */ /* on Lite-On PNIC */ /* CSR1 - Transmit Poll Demand */ #define CSR_TXPOLL TULIP_CSR1 #define TXPOLL_TPD 0x00000001 /* transmit poll demand */ /* CSR2 - Receive Poll Demand */ #define CSR_RXPOLL TULIP_CSR2 #define RXPOLL_RPD 0x00000001 /* receive poll demand */ /* CSR3 - Receive List Base Address */ #define CSR_RXLIST TULIP_CSR3 /* CSR4 - Transmit List Base Address */ #define CSR_TXLIST TULIP_CSR4 /* CSR5 - Status */ #define CSR_STATUS TULIP_CSR5 #define STATUS_TI 0x00000001 /* transmit interrupt */ #define STATUS_TPS 0x00000002 /* transmit process stopped */ #define STATUS_TU 0x00000004 /* transmit buffer unavail */ #define STATUS_TJT 0x00000008 /* transmit jabber timeout */ #define STATUS_WINB_REI 0x00000008 /* receive early interrupt */ #define STATUS_LNPANC 0x00000010 /* link pass (21041) */ #define STATUS_WINB_RERR 0x00000010 /* receive error */ #define STATUS_UNF 0x00000020 /* transmit underflow */ #define STATUS_RI 0x00000040 /* receive interrupt */ #define STATUS_RU 0x00000080 /* receive buffer unavail */ #define STATUS_RPS 0x00000100 /* receive process stopped */ #define STATUS_RWT 0x00000200 /* receive watchdog timeout */ #define STATUS_AT 0x00000400 /* SIA AUI/TP pin changed (21040) */ #define STATUS_ETI 0x00000400 /* early transmit interrupt (21142/PMAC/Winbond) */ #define STATUS_FD 0x00000800 /* full duplex short frame received (21040) */ #define STATUS_TM 0x00000800 /* timer expired (21041) */ #define STATUS_LNF 0x00001000 /* link fail (21040) */ #define STATUS_SE 0x00002000 /* system error */ #define STATUS_ER 0x00004000 /* early receive (21041) */ #define STATUS_AIS 0x00008000 /* abnormal interrupt summary */ #define STATUS_NIS 0x00010000 /* normal interrupt summary */ #define STATUS_RS 0x000e0000 /* receive process state */ #define STATUS_RS_STOPPED 0x00000000 /* Stopped */ #define STATUS_RS_FETCH 0x00020000 /* Running - fetch receive descriptor */ #define STATUS_RS_CHECK 0x00040000 /* Running - check for end of receive */ #define STATUS_RS_WAIT 0x00060000 /* Running - wait for packet */ #define STATUS_RS_SUSPENDED 0x00080000 /* Suspended */ #define STATUS_RS_CLOSE 0x000a0000 /* Running - close receive descriptor */ #define STATUS_RS_FLUSH 0x000c0000 /* Running - flush current frame from FIFO */ #define STATUS_RS_QUEUE 0x000e0000 /* Running - queue current frame from FIFO into buffer */ #define STATUS_TS 0x00700000 /* transmit process state */ #define STATUS_TS_STOPPED 0x00000000 /* Stopped */ #define STATUS_TS_FETCH 0x00100000 /* Running - fetch transmit descriptor */ #define STATUS_TS_WAIT 0x00200000 /* Running - wait for end of transmission */ #define STATUS_TS_READING 0x00300000 /* Running - read buffer from memory and queue into FIFO */ #define STATUS_TS_RESERVED 0x00400000 /* RESERVED */ #define STATUS_TS_SETUP 0x00500000 /* Running - Setup packet */ #define STATUS_TS_SUSPENDED 0x00600000 /* Suspended */ #define STATUS_TS_CLOSE 0x00700000 /* Running - close transmit descriptor */ #define STATUS_EB 0x03800000 /* error bits */ #define STATUS_EB_PARITY 0x00000000 /* parity errror */ #define STATUS_EB_MABT 0x00800000 /* master abort */ #define STATUS_EB_TABT 0x01000000 /* target abort */ #define STATUS_GPPI 0x04000000 /* GPIO interrupt (21142) */ #define STATUS_PNIC_TXABORT 0x04000000 /* transmit aborted */ #define STATUS_LC 0x08000000 /* 100baseTX link change (21142/PMAC) */ #define STATUS_PMAC_WKUPI 0x10000000 /* wake up event */ /* CSR6 - Operation Mode */ #define CSR_OPMODE TULIP_CSR6 #define OPMODE_HP 0x00000001 /* hash/perfect mode (ro) */ #define OPMODE_SR 0x00000002 /* start receive */ #define OPMODE_HO 0x00000004 /* hash only mode (ro) */ #define OPMODE_PB 0x00000008 /* pass bad frames */ #define OPMODE_WINB_APP 0x00000008 /* accept all physcal packet */ #define OPMODE_IF 0x00000010 /* inverse filter mode (ro) */ #define OPMODE_WINB_AMP 0x00000010 /* accept multicast packet */ #define OPMODE_SB 0x00000020 /* start backoff counter */ #define OPMODE_WINB_ABP 0x00000020 /* accept broadcast packet */ #define OPMODE_PR 0x00000040 /* promiscuous mode */ #define OPMODE_WINB_ARP 0x00000040 /* accept runt packet */ #define OPMODE_PM 0x00000080 /* pass all multicast */ #define OPMODE_WINB_AEP 0x00000080 /* accept error packet */ #define OPMODE_FKD 0x00000100 /* flaky oscillator disable */ #define OPMODE_FD 0x00000200 /* full-duplex mode */ #define OPMODE_OM 0x00000c00 /* operating mode */ #define OPMODE_OM_NORMAL 0x00000000 /* normal mode */ #define OPMODE_OM_INTLOOP 0x00000400 /* internal loopback */ #define OPMODE_OM_EXTLOOP 0x00000800 /* external loopback */ #define OPMODE_FC 0x00001000 /* force collision */ #define OPMODE_ST 0x00002000 /* start transmitter */ #define OPMODE_TR 0x0000c000 /* threshold control */ #define OPMODE_TR_72 0x00000000 /* 72 bytes */ #define OPMODE_TR_96 0x00004000 /* 96 bytes */ #define OPMODE_TR_128 0x00008000 /* 128 bytes */ #define OPMODE_TR_160 0x0000c000 /* 160 bytes */ #define OPMODE_WINB_TTH 0x001fc000 /* transmit threshold */ #define OPMODE_WINB_TTH_SHIFT 14 #define OPMODE_BP 0x00010000 /* backpressure enable */ #define OPMODE_CA 0x00020000 /* capture effect enable */ #define OPMODE_PNIC_TBEN 0x00020000 /* Tx backoff offset enable */ #define OPMODE_PS 0x00040000 /* port select: 1 = MII/SYM, 0 = SRL (21140) */ #define OPMODE_HBD 0x00080000 /* heartbeat disable: set in MII/SYM 100mbps, set according to PHY in MII 10mbps mode (21140) */ #define OPMODE_PNIC_IT 0x00100000 /* immediate transmit */ #define OPMODE_SF 0x00200000 /* store and forward mode (21140) */ #define OPMODE_WINB_REIT 0x1fe00000 /* receive eartly intr thresh */ #define OPMODE_WINB_REIT_SHIFT 21 #define OPMODE_TTM 0x00400000 /* Transmit Threshold Mode: 1 = 10mbps, 0 = 100mbps (21140) */ #define OPMODE_PCS 0x00800000 /* PCS function (21140) */ #define OPMODE_SCR 0x01000000 /* scrambler mode (21140) */ #define OPMODE_MBO 0x02000000 /* must be one (21140) */ #define OPMODE_IDAMSB 0x04000000 /* ignore dest addr MSB (21142) */ #define OPMODE_PNIC_DRC 0x20000000 /* don't include CRC in Rx frames (PNIC) */ #define OPMODE_WINB_FES 0x20000000 /* fast ethernet select */ #define OPMODE_RA 0x40000000 /* receive all (21140) */ #define OPMODE_PNIC_EED 0x40000000 /* 1 == ext, 0 == int ENDEC (PNIC) */ #define OPMODE_WINB_TEIO 0x40000000 /* transmit early intr on */ #define OPMODE_SC 0x80000000 /* special capture effect enable (21041+) */ #define OPMODE_WINB_REIO 0x80000000 /* receive early intr on */ /* Shorthand for media-related OPMODE bits */ #define OPMODE_MEDIA_BITS (OPMODE_FD|OPMODE_PS|OPMODE_PCS|OPMODE_SCR) /* CSR7 - Interrupt Enable */ #define CSR_INTEN TULIP_CSR7 /* See bits for CSR5 -- Status */ /* CSR8 - Missed Frames */ #define CSR_MISSED TULIP_CSR8 #define MISSED_MFC 0x0000ffff /* missed packet count */ #define MISSED_MFO 0x00010000 /* missed packet count overflowed */ #define MISSED_FOC 0x0ffe0000 /* fifo overflow counter (21140) */ #define MISSED_OCO 0x10000000 /* overflow counter overflowed (21140) */ #define MISSED_GETMFC(x) ((x) & MISSED_MFC) #define MISSED_GETFOC(x) (((x) & MISSED_FOC) >> 17) /* CSR9 - MII, SROM, Boot ROM, Ethernet Address ROM register. */ #define CSR_MIIROM TULIP_CSR9 #define MIIROM_DATA 0x000000ff /* byte of data from Ethernet Address ROM (21040), byte of data to/from Boot ROM (21041+) */ #define MIIROM_SROMCS 0x00000001 /* SROM chip select */ #define MIIROM_SROMSK 0x00000002 /* SROM clock */ #define MIIROM_SROMDI 0x00000004 /* SROM data in (to) */ #define MIIROM_SROMDO 0x00000008 /* SROM data out (from) */ #define MIIROM_REG 0x00000400 /* external register select */ #define MIIROM_SR 0x00000800 /* SROM select */ #define MIIROM_BR 0x00001000 /* boot ROM select */ #define MIIROM_WR 0x00002000 /* write to boot ROM */ #define MIIROM_RD 0x00004000 /* read from boot ROM */ #define MIIROM_MOD 0x00008000 /* mode select (ro) (21041) */ #define MIIROM_MDC 0x00010000 /* MII clock */ #define MIIROM_MDO 0x00020000 /* MII data out */ #define MIIROM_MIIDIR 0x00040000 /* MII direction mode 1 = PHY in read, 0 = PHY in write */ #define MIIROM_MDI 0x00080000 /* MII data in */ #define MIIROM_DN 0x80000000 /* data not valid (21040) */ #define MIIROM_PMAC_LED0SEL 0x10000000 /* 0 == LED0 activity (def) 1 == LED0 speed */ #define MIIROM_PMAC_LED1SEL 0x20000000 /* 0 == LED1 link (def) 1 == LED1 link/act */ #define MIIROM_PMAC_LED2SEL 0x40000000 /* 0 == LED2 speed (def) 1 == LED2 collision */ #define MIIROM_PMAC_LED3SEL 0x80000000 /* 0 == LED3 receive (def) 1 == LED3 full duplex */ /* SROM opcodes */ #define TULIP_SROM_OPC_ERASE 0x04 #define TULIP_SROM_OPC_WRITE 0x05 #define TULIP_SROM_OPC_READ 0x06 /* The Lite-On PNIC does this completely differently */ #define PNIC_MIIROM_DATA 0x0000ffff /* mask of data bits ??? */ #define PNIC_MIIROM_BUSY 0x80000000 /* EEPROM is busy */ /* CSR10 - Boot ROM address register (21041+). */ #define CSR_ROMADDR TULIP_CSR10 #define ROMADDR_MASK 0x000003ff /* boot rom address */ /* CSR11 - General Purpose Timer (21041+). */ #define CSR_GPT TULIP_CSR11 #define GPT_VALUE 0x0000ffff /* timer value */ #define GPT_CON 0x00010000 /* continuous mode */ /* 21143-PD and 21143-TD Interrupt Mitigation bits */ #define GPT_NRX 0x000e0000 /* number of Rx packets */ #define GPT_RXT 0x00f00000 /* Rx timer */ #define GPT_NTX 0x07000000 /* number of Tx packets */ #define GPT_TXT 0x78000000 /* Tx timer */ #define GPT_CYCLE 0x80000000 /* cycle size */ /* CSR12 - SIA Status Register. */ #define CSR_SIASTAT TULIP_CSR12 #define SIASTAT_PAUI 0x00000001 /* pin AUI/TP indication (21040) */ #define SIASTAT_MRA 0x00000001 /* MII receive activity (21142) */ #define SIASTAT_NCR 0x00000002 /* network connection error */ #define SIASTAT_LS100 0x00000002 /* 100baseT link status 0 == pass (21142) */ #define SIASTAT_LKF 0x00000004 /* link fail status */ #define SIASTAT_LS10 0x00000004 /* 10baseT link status 0 == pass (21142) */ #define SIASTAT_APS 0x00000008 /* auto polarity status */ #define SIASTAT_DSD 0x00000010 /* PLL self test done */ #define SIASTAT_DSP 0x00000020 /* PLL self test pass */ #define SIASTAT_DAZ 0x00000040 /* PLL all zero */ #define SIASTAT_DAO 0x00000080 /* PLL all one */ #define SIASTAT_SRA 0x00000100 /* selected port receive activity (21041) */ #define SIASTAT_ARA 0x00000100 /* AUI receive activity (21142) */ #define SIASTAT_NRA 0x00000200 /* non-selected port receive activity (21041) */ #define SIASTAT_TRA 0x00000200 /* 10base-T receive activity (21142) */ #define SIASTAT_NSN 0x00000400 /* non-stable NLPs detected (21041) */ #define SIASTAT_TRF 0x00000800 /* transmit remote fault (21041) */ #define SIASTAT_ANS 0x00007000 /* autonegotiation state (21041) */ #define SIASTAT_ANS_DIS 0x00000000 /* disabled */ #define SIASTAT_ANS_TXDIS 0x00001000 /* transmit disabled */ #define SIASTAT_ANS_ABD 0x00002000 /* ability detect */ #define SIASTAT_ANS_ACKD 0x00003000 /* acknowledge detect */ #define SIASTAT_ANS_ACKC 0x00004000 /* complete acknowledge */ #define SIASTAT_ANS_FLPGOOD 0x00005000 /* FLP link good */ #define SIASTAT_ANS_LINKCHECK 0x00006000 /* link check */ #define SIASTAT_LPN 0x00008000 /* link partner negotiable (21041) */ #define SIASTAT_LPC 0xffff0000 /* link partner code word */ #define SIASTAT_GETLPC(x) (((x) & SIASTAT_LPC) >> 16) /* CSR13 - SIA Connectivity Register. */ #define CSR_SIACONN TULIP_CSR13 #define SIACONN_SRL 0x00000001 /* SIA reset (0 == reset) */ #define SIACONN_PS 0x00000002 /* pin AUI/TP selection (21040) */ #define SIACONN_CAC 0x00000004 /* CSR autoconfiguration */ #define SIACONN_AUI 0x00000008 /* select AUI (0 = TP) */ #define SIACONN_EDP 0x00000010 /* SIA PLL external input enable (21040) */ #define SIACONN_ENI 0x00000020 /* encoder input multiplexer (21040) */ #define SIACONN_SIM 0x00000040 /* serial interface input multiplexer (21040) */ #define SIACONN_ASE 0x00000080 /* APLL start enable (21040) */ #define SIACONN_SEL 0x00000f00 /* external port output multiplexer select (21040) */ #define SIACONN_IE 0x00001000 /* input enable (21040) */ #define SIACONN_OE1_3 0x00002000 /* output enable 1, 3 (21040) */ #define SIACONN_OE2_4 0x00004000 /* output enable 2, 4 (21040) */ #define SIACONN_OE5_6_7 0x00008000 /* output enable 5, 6, 7 (21040) */ #define SIACONN_SDM 0x0000ef00 /* SIA diagnostic mode; always set to this value for normal operation (21041) */ /* CSR14 - SIA Transmit Receive Register. */ #define CSR_SIATXRX TULIP_CSR14 #define SIATXRX_ECEN 0x00000001 /* encoder enable */ #define SIATXRX_LBK 0x00000002 /* loopback enable */ #define SIATXRX_DREN 0x00000004 /* driver enable */ #define SIATXRX_LSE 0x00000008 /* link pulse send enable */ #define SIATXRX_CPEN 0x00000030 /* compensation enable */ #define SIATXRX_CPEN_DIS0 0x00000000 /* disabled */ #define SIATXRX_CPEN_DIS1 0x00000010 /* disabled */ #define SIATXRX_CPEN_HIGHPWR 0x00000020 /* high power */ #define SIATXRX_CPEN_NORMAL 0x00000030 /* normal */ #define SIATXRX_MBO 0x00000040 /* must be one (21041 pass 2) */ #define SIATXRX_TH 0x00000040 /* 10baseT HDX enable (21142) */ #define SIATXRX_ANE 0x00000080 /* autonegotiation enable (21041/21142) */ #define SIATXRX_RSQ 0x00000100 /* receive squelch enable */ #define SIATXRX_CSQ 0x00000200 /* collision squelch enable */ #define SIATXRX_CLD 0x00000400 /* collision detect enable */ #define SIATXRX_SQE 0x00000800 /* signal quality generation enable */ #define SIATXRX_LTE 0x00001000 /* link test enable */ #define SIATXRX_APE 0x00002000 /* auto-polarity enable */ #define SIATXRX_SPP 0x00004000 /* set plarity plus */ #define SIATXRX_TAS 0x00008000 /* 10base-T/AUI autosensing enable (21041/21142) */ #define SIATXRX_THX 0x00010000 /* 100baseTX-HDX (21142) */ #define SIATXRX_TXF 0x00020000 /* 100baseTX-FDX (21142) */ #define SIATXRX_T4 0x00040000 /* 100baseT4 (21142) */ /* CSR15 - SIA General Register. */ #define CSR_SIAGEN TULIP_CSR15 #define SIAGEN_JBD 0x00000001 /* jabber disable */ #define SIAGEN_HUJ 0x00000002 /* host unjab */ #define SIAGEN_JCK 0x00000004 /* jabber clock */ #define SIAGEN_ABM 0x00000008 /* BNC select (21041) */ #define SIAGEN_RWD 0x00000010 /* receive watchdog disable */ #define SIAGEN_RWR 0x00000020 /* receive watchdog release */ #define SIAGEN_LE1 0x00000040 /* LED 1 enable (21041) */ #define SIAGEN_LV1 0x00000080 /* LED 1 value (21041) */ #define SIAGEN_TSCK 0x00000100 /* test clock */ #define SIAGEN_FUSQ 0x00000200 /* force unsquelch */ #define SIAGEN_FLF 0x00000400 /* force link fail */ #define SIAGEN_LSD 0x00000800 /* LED stretch disable (21041) */ #define SIAGEN_LEE 0x00000800 /* Link extend enable (21142) */ #define SIAGEN_DPST 0x00001000 /* PLL self-test start */ #define SIAGEN_FRL 0x00002000 /* force receiver low */ #define SIAGEN_LE2 0x00004000 /* LED 2 enable (21041) */ #define SIAGEN_RMP 0x00004000 /* received magic packet (21143) */ #define SIAGEN_LV2 0x00008000 /* LED 2 value (21041) */ #define SIAGEN_HCKR 0x00008000 /* hacker (21143) */ #define SIAGEN_MD 0x000f0000 /* general purpose mode/data */ #define SIAGEN_LGS 0x00f00000 /* LED/GEP select */ #define SIAGEN_GEI0 0x01000000 /* GEP pin 0 intr enable */ #define SIAGEN_GEI1 0x02000000 /* GEP pin 1 intr enable */ #define SIAGEN_RME 0x04000000 /* receive match enable */ #define SIAGEN_CWE 0x08000000 /* control write enable */ #define SIAGEN_GI0 0x10000000 /* GEP pin 0 interrupt */ #define SIAGEN_GI1 0x20000000 /* GEP pin 1 interrupt */ #define SIAGEN_RMI 0x40000000 /* receive match interrupt */ /* CSR12 - General Purpose Port (21140+). */ #define CSR_GPP TULIP_CSR12 #define GPP_MD 0x000000ff /* general purpose mode/data */ #define GPP_GPC 0x00000100 /* general purpose control */ #define GPP_PNIC_GPD 0x0000000f /* general purpose data */ #define GPP_PNIC_GPC 0x000000f0 /* general purpose control */ #define GPP_PNIC_IN(x) (1 << (x)) #define GPP_PNIC_OUT(x, on) (((on) << (x)) | (1 << ((x) + 4))) /* * The Lite-On PNIC manual recommends the following for the General Purpose * I/O pins: * * 0 Speed Relay 1 == 100mbps * 1 100mbps loopback 1 == loopback * 2 BNC DC-DC converter 1 == select BNC * 3 Link 100 1 == 100baseTX link status */ #define GPP_PNIC_PIN_SPEED_RLY 0 #define GPP_PNIC_PIN_100M_LPKB 1 #define GPP_PNIC_PIN_BNC_XMER 2 #define GPP_PNIC_PIN_LNK100X 3 /* * Digital Semiconductor 21040 registers. */ /* CSR11 - Full Duplex Register */ #define CSR_21040_FDX TULIP_CSR11 #define FDX21040_FDXACV 0x0000ffff /* full duplex autoconfiguration value */ /* SIA configuration for 10base-T (from the 21040 manual) */ #define SIACONN_21040_10BASET 0x0000ef01 #define SIATXRX_21040_10BASET 0x0000ffff #define SIAGEN_21040_10BASET 0x00000000 /* SIA configuration for 10base-T full-duplex (from the 21040 manual) */ #define SIACONN_21040_10BASET_FDX 0x0000ef01 #define SIATXRX_21040_10BASET_FDX 0x0000fffd #define SIAGEN_21040_10BASET_FDX 0x00000000 /* SIA configuration for 10base-5 (from the 21040 manual) */ #define SIACONN_21040_AUI 0x0000ef09 #define SIATXRX_21040_AUI 0x00000705 #define SIAGEN_21040_AUI 0x00000006 /* SIA configuration for External SIA (from the 21040 manual) */ #define SIACONN_21040_EXTSIA 0x00003041 #define SIATXRX_21040_EXTSIA 0x00000000 #define SIAGEN_21040_EXTSIA 0x00000006 /* * Digital Semiconductor 21041 registers. */ /* SIA configuration for 10base-T (from the 21041 manual) */ #define SIACONN_21041_10BASET 0x0000ef01 #define SIATXRX_21041_10BASET 0x0000ff3f #define SIAGEN_21041_10BASET 0x00000000 #define SIACONN_21041P2_10BASET SIACONN_21041_10BASET #define SIATXRX_21041P2_10BASET 0x0000ffff #define SIAGEN_21041P2_10BASET SIAGEN_21041_10BASET /* SIA configuration for 10base-T full-duplex (from the 21041 manual) */ #define SIACONN_21041_10BASET_FDX 0x0000ef01 #define SIATXRX_21041_10BASET_FDX 0x0000ff3d #define SIAGEN_21041_10BASET_FDX 0x00000000 #define SIACONN_21041P2_10BASET_FDX SIACONN_21041_10BASET_FDX #define SIATXRX_21041P2_10BASET_FDX 0x0000ffff #define SIAGEN_21041P2_10BASET_FDX SIAGEN_21041_10BASET_FDX /* SIA configuration for 10base-5 (from the 21041 manual) */ #define SIACONN_21041_AUI 0x0000ef09 #define SIATXRX_21041_AUI 0x0000f73d #define SIAGEN_21041_AUI 0x0000000e #define SIACONN_21041P2_AUI SIACONN_21041_AUI #define SIATXRX_21041P2_AUI 0x0000f7fd #define SIAGEN_21041P2_AUI SIAGEN_21041_AUI /* SIA configuration for 10base-2 (from the 21041 manual) */ #define SIACONN_21041_BNC 0x0000ef09 #define SIATXRX_21041_BNC 0x0000f73d #define SIAGEN_21041_BNC 0x00000006 #define SIACONN_21041P2_BNC SIACONN_21041_BNC #define SIATXRX_21041P2_BNC 0x0000f7fd #define SIAGEN_21041P2_BNC SIAGEN_21041_BNC /* * Digital Semiconductor 21142/21143 registers. */ /* SIA configuration for 10baseT (from the 21143 manual) */ #define SIACONN_21142_10BASET 0x00000001 #define SIATXRX_21142_10BASET 0x00007f3f #define SIAGEN_21142_10BASET 0x00000008 /* SIA configuration for 10baseT full-duplex (from the 21143 manual) */ #define SIACONN_21142_10BASET_FDX 0x00000001 #define SIATXRX_21142_10BASET_FDX 0x00007f3d #define SIAGEN_21142_10BASET_FDX 0x00000008 /* SIA configuration for 10base5 (from the 21143 manual) */ #define SIACONN_21142_AUI 0x00000009 #define SIATXRX_21142_AUI 0x00004705 #define SIAGEN_21142_AUI 0x0000000e /* SIA configuration for 10base2 (from the 21143 manual) */ #define SIACONN_21142_BNC 0x00000009 #define SIATXRX_21142_BNC 0x00004705 #define SIAGEN_21142_BNC 0x00000006 /* * Lite-On 82C168/82C169 registers. */ /* ENDEC General Register */ #define CSR_PNIC_ENDEC 0x78 #define PNIC_ENDEC_JDIS 0x00000001 /* jabber disable */ /* SROM Power Register */ #define CSR_PNIC_SROMPWR 0x90 #define PNIC_SROMPWR_MRLE 0x00000001 /* Memory-Read-Line enable */ #define PNIC_SROMPWR_CB 0x00000002 /* cache boundary alignment burst type; 1 == burst to boundary, 0 == single-cycle to boundary */ /* SROM Control Register */ #define CSR_PNIC_SROMCTL 0x98 #define PNIC_SROMCTL_addr 0x0000003f /* mask of address bits */ /* XXX THESE ARE WRONG ACCORDING TO THE MANUAL! */ #define PNIC_SROMCTL_READ 0x00000600 /* read command */ /* MII Access Register */ #define CSR_PNIC_MII 0xa0 #define PNIC_MII_DATA 0x0000ffff /* mask of data bits */ #define PNIC_MII_REG 0x007c0000 /* register mask */ #define PNIC_MII_REGSHIFT 18 #define PNIC_MII_PHY 0x0f800000 /* phy mask */ #define PNIC_MII_PHYSHIFT 23 #define PNIC_MII_OPCODE 0x30000000 /* opcode mask */ #define PNIC_MII_RESERVED 0x00020000 /* must be one/must be zero; 2 bits are described here */ #define PNIC_MII_MBO 0x40000000 /* must be one */ #define PNIC_MII_BUSY 0x80000000 /* MII is busy */ #define PNIC_MII_WRITE 0x10000000 /* write PHY command */ #define PNIC_MII_READ 0x20000000 /* read PHY command */ /* NWAY Register */ #define CSR_PNIC_NWAY 0xb8 #define PNIC_NWAY_RS 0x00000001 /* reset NWay block */ #define PNIC_NWAY_PD 0x00000002 /* power down NWay block */ #define PNIC_NWAY_BX 0x00000004 /* bypass transciever */ #define PNIC_NWAY_LC 0x00000008 /* AUI low current mode */ #define PNIC_NWAY_UV 0x00000010 /* low squelch voltage */ #define PNIC_NWAY_DX 0x00000020 /* disable TP pol. correction */ #define PNIC_NWAY_TW 0x00000040 /* select TP (0 == AUI) */ #define PNIC_NWAY_AF 0x00000080 /* AUI full/half step input voltage */ #define PNIC_NWAY_FD 0x00000100 /* full duplex mode */ #define PNIC_NWAY_DL 0x00000200 /* disable link integrity test */ #define PNIC_NWAY_DM 0x00000400 /* disable AUI/TP autodetect */ #define PNIC_NWAY_100 0x00000800 /* 1 == 100mbps, 0 == 10mbps */ #define PNIC_NWAY_NW 0x00001000 /* enable NWay block */ #define PNIC_NWAY_CAP10T 0x00002000 /* adv. 10baseT */ #define PNIC_NWAY_CAP10TFDX 0x00004000 /* adv. 10baseT-FDX */ #define PNIC_NWAY_CAP100TXFDX 0x00008000 /* adv. 100baseTX-FDX */ #define PNIC_NWAY_CAP100TX 0x00010000 /* adv. 100baseTX */ #define PNIC_NWAY_CAP100T4 0x00020000 /* adv. 100base-T4 */ #define PNIC_NWAY_RN 0x02000000 /* re-negotiate enable */ #define PNIC_NWAY_RF 0x04000000 /* remote fault detected */ #define PNIC_NWAY_LPAR10T 0x08000000 /* link part. 10baseT */ #define PNIC_NWAY_LPAR10TFDX 0x10000000 /* link part. 10baseT-FDX */ #define PNIC_NWAY_LPAR100TXFDX 0x20000000 /* link part. 100baseTX-FDX */ #define PNIC_NWAY_LPAR100TX 0x40000000 /* link part. 100baseTX */ #define PNIC_NWAY_LPAR100T4 0x80000000 /* link part. 100base-T4 */ #define PNIC_NWAY_LPAR_MASK 0xf8000000 /* * Macronix 98713, 98713A, 98715, 98715A, 98725 and * Lite-On 82C115 registers. */ /* * Note, the MX98713 is very Tulip-like: * * CSR12 General Purpose Port (like 21140) * CSR13 reserved * CSR14 reserved * CSR15 Watchdog Timer (like 21140) * * The Macronix CSR12, CSR13, CSR14, and CSR15 exist only * on the MX98713A and higher. */ /* CSR12 - 10base-T Status Port (similar to SIASTAT) */ /* See SIASTAT 21142/21143 bits */ #define CSR_PMAC_10TSTAT TULIP_CSR12 #define PMAC_SIASTAT_MASK (SIASTAT_LS100|SIASTAT_LS10| \ SIASTAT_APS|SIASTAT_TRF|SIASTAT_ANS| \ SIASTAT_LPN|SIASTAT_LPC) /* CSR13 - NWAY Reset Register */ #define CSR_PMAC_NWAYRESET TULIP_CSR13 /* See SIACONN 21142/21143 bits */ #define PMAC_SIACONN_MASK (SIACONN_SRL) #define PMAC_NWAYRESET_100TXRESET 0x00000002 /* 100base PMD reset */ /* CSR14 - 10base-T Control Port */ #define CSR_PMAC_10TCTL TULIP_CSR14 /* See SIATXRX 21142/21143 bits */ #define PMAC_SIATXRX_MASK (SIATXRX_LBK|SIATXRX_DREN|SIATXRX_TH| \ SIATXRX_ANE|SIATXRX_RSQ|SIATXRX_LTE| \ SIATXRX_THX|SIATXRX_TXF|SIATXRX_T4) /* CSR15 - Watchdog Timer Register */ /* MX98713: see 21140 CSR15 */ /* others: see SIAGEN 21142/21143 bits */ #define PMAC_SIAGEN_MASK (SIAGEN_JBD|SIAGEN_HUJ|SIAGEN_JCK| \ SIAGEN_RWD|SIAGEN_RWR) /* CSR16 - Test Operation Register (a.k.a. Magic Packet Register) */ #define CSR_PMAC_TOR TULIP_CSR16 #define PMAC_TOR_98713 0x0F370000 #define PMAC_TOR_98715 0x0B3C0000 /* CSR20 - NWAY Status */ #define CSR_PMAC_NWAYSTAT TULIP_CSR20 /* * Note: the MX98715A manual claims that EQTEST and PCITEST * must be set to 1 by software for normal operation, but * this does not appear to be necessary. This is probably * one of the things that frobbing the Test Operation Register * does. */ #define PMAC_NWAYSTAT_EQTEST 0x00001000 /* EQ test */ #define PMAC_NWAYSTAT_PCITEST 0x00010000 /* PCI test */ #define PMAC_NWAYSTAT_10TXH 0x08000000 /* 10t accepted */ #define PMAC_NWAYSTAT_10TXF 0x10000000 /* 10t-fdx accepted */ #define PMAC_NWAYSTAT_100TXH 0x20000000 /* 100tx accepted */ #define PMAC_NWAYSTAT_100TXF 0x40000000 /* 100tx-fdx accepted */ #define PMAC_NWAYSTAT_T4 0x80000000 /* 100t4 accepted */ /* CSR21 - Flow Control Register */ #define CSR_PNICII_FLOWCTL TULIP_CSR21 #define PNICII_FLOWCTL_WKFCATEN 0x00000010 /* enable wake-up frame catenation feature */ #define PNICII_FLOWCTL_NFCE 0x00000020 /* accept flow control result from NWay */ #define PNICII_FLOWCTL_FCTH0 0x00000040 /* rx flow control thresh 0 */ #define PNICII_FLOWCTL_FCTH1 0x00000080 /* rx flow control thresh 1 */ #define PNICII_FLOWCTL_REJECTFC 0x00000100 /* abort rx flow control */ #define PNICII_FLOWCTL_STOPTX 0x00000200 /* tx flow stopped */ #define PNICII_FLOWCTL_RUFCEN 0x00000400 /* send flow control when RU interrupt occurs */ #define PNICII_FLOWCTL_RXFCEN 0x00000800 /* rx flow control enable */ #define PNICII_FLOWCTL_TXFCEN 0x00001000 /* tx flow control enable */ #define PNICII_FLOWCTL_RESTOP 0x00002000 /* restop mode */ #define PNICII_FLOWCTL_RESTART 0x00004000 /* restart mode */ #define PNICII_FLOWCTL_TEST 0x00008000 /* test flow control timer */ #define PNICII_FLOWCTL_TMVAL 0xffff0000 /* timer value in flow control frame */ #define PNICII_FLOWCTL_TH_512 (PNICII_FLOWCTL_FCTH0|PNICII_FLOWCTL_FCTH1) #define PNICII_FLOWCTL_TH_256 (PNICII_FLOWCTL_FCTH1) #define PNICII_FLOWCTL_TH_128 (PNICII_FLOWCTL_FCTH0) #define PNICII_FLOWCTL_TH_OVFLW (0) /* CSR22 - MAC ID Byte 3-0 Register */ #define CSR_PNICII_MACID0 TULIP_CSR22 #define PNICII_MACID_1 0 /* shift */ #define PNICII_MACID_0 8 /* shift */ #define PNICII_MACID_3 16 /* shift */ #define PNICII_MACID_2 24 /* shift */ /* CSR23 - Magic ID Byte 5,4/MACID Byte 5,4 Register */ #define PNICII_MACID_5 0 /* shift */ #define PNICII_MACID_4 8 /* shift */ #define PNICII_MAGID_5 16 /* shift */ #define PNICII_MAGIC_4 24 /* shift */ /* CSR24 - Magic ID Byte 3-0 Register */ #define PNICII_MAGID_1 0 /* shift */ #define PNICII_MAGID_0 8 /* shift */ #define PNICII_MAGID_3 16 /* shift */ #define PNICII_MAGID_2 24 /* shift */ /* CSR25 - CSR28 - Filter Byte Mask Registers */ #define CSR_PNICII_MASK0 TULIP_CSR25 #define CSR_PNICII_MASK1 TULIP_CSR26 #define CSR_PNICII_MASK2 TULIP_CSR27 #define CSR_PNICII_MASK3 TULIP_CSR28 /* CSR29 - Filter Offset Register */ #define CSR_PNICII_FILOFF TULIP_CSR29 #define PNICII_FILOFF_PAT0 0x0000007f /* pattern 0 offset */ #define PNICII_FILOFF_EN0 0x00000080 /* enable pattern 0 */ #define PNICII_FILOFF_PAT1 0x00007f00 /* pattern 1 offset */ #define PNICII_FILOFF_EN1 0x00008000 /* enable pattern 1 */ #define PNICII_FILOFF_PAT2 0x007f0000 /* pattern 2 offset */ #define PNICII_FILOFF_EN2 0x00800000 /* enable pattern 2 */ #define PNICII_FILOFF_PAT3 0x7f000000 /* pattern 3 offset */ #define PNICII_FILOFF_EN3 0x80000000 /* enable pattern 3 */ /* CSR30 - Filter 1 and 0 CRC-16 Register */ #define CSR_PNICII_FIL01 TULIP_CSR30 #define PNICII_FIL01_CRC0 0x0000ffff /* CRC-16 of pattern 0 */ #define PNICII_FIL01_CRC1 0xffff0000 /* CRC-16 of pattern 1 */ /* CSR31 = Filter 3 and 2 CRC-16 Register */ #define CSR_PNICII_FIL23 TULIP_CSR31 #define PNICII_FIL23_CRC2 0x0000ffff /* CRC-16 of pattern 2 */ #define PNICII_FIL23_CRC3 0xffff0000 /* CRC-16 of pattern 3 */ /* * Winbond 89C840F registers. */ /* CSR12 - Current Receive Descriptor Register */ #define CSR_WINB_CRDAR TULIP_CSR12 /* CSR13 - Current Receive Buffer Register */ #define CSR_WINB_CCRBAR TULIP_CSR13 /* CSR14 - Multicast Address Register 0 */ #define CSR_WINB_CMA0 TULIP_CSR14 /* CSR15 - Multicast Address Register 1 */ #define CSR_WINB_CMA1 TULIP_CSR15 /* CSR16 - Physical Address Register 0 */ #define CSR_WINB_CPA0 TULIP_CSR16 /* CSR17 - Physical Address Register 1 */ #define CSR_WINB_CPA1 TULIP_CSR17 /* CSR18 - Boot ROM Size Register */ #define CSR_WINB_CBRCR TULIP_CSR18 #define WINB_CBRCR_NONE 0x00000000 /* no boot rom */ /* 0x00000001 also no boot rom */ #define WINB_CBRCR_8K 0x00000002 /* 8k */ #define WINB_CBRCR_16K 0x00000003 /* 16k */ #define WINB_CBRCR_32K 0x00000004 /* 32k */ #define WINB_CBRCR_64K 0x00000005 /* 64k */ #define WINB_CBRCR_128K 0x00000006 /* 128k */ #define WINB_CBRCR_256K 0x00000007 /* CSR19 - Current Transmit Descriptor Register */ #define CSR_WINB_CTDAR TULIP_CSR19 /* CSR20 - Current Transmit Buffer Register */ #define CSR_WINB_CTBAR TULIP_CSR20 /* * ADMtek AL981 registers * * We define these as strict byte offsets into PCI space, since * not all of them have consistent access rules. */ /* CSR13 - Wake-up Control/Status Register */ #define CSR_ADM_WCSR 0x68 #define ADM_WCSR_LSC 0x00000001 /* link status changed */ #define ADM_WCSR_MPR 0x00000002 /* magic packet received */ #define ADM_WCSR_WFR 0x00000004 /* wake up frame received */ #define ADM_WCSR_LSCE 0x00000100 /* link status changed en. */ #define ADM_WCSR_MPRE 0x00000200 /* magic packet receive en. */ #define ADM_WCSR_WFRE 0x00000400 /* wake up frame receive en. */ #define ADM_WCSR_LINKON 0x00010000 /* link-on detect en. */ #define ADM_WCSR_LINKOFF 0x00020000 /* link-off detect en. */ #define ADM_WCSR_WP5E 0x02000000 /* wake up pat. 5 en. */ #define ADM_WCSR_WP4E 0x04000000 /* wake up pat. 4 en. */ #define ADM_WCSR_WP3E 0x08000000 /* wake up pat. 3 en. */ #define ADM_WCSR_WP2E 0x10000000 /* wake up pat. 2 en. */ #define ADM_WCSR_WP1E 0x20000000 /* wake up pat. 1 en. */ #define ADM_WCSR_CRCT 0x40000000 /* CRC-16 type: 0 == 0000 initial 1 == ffff initial */ /* CSR14 - Wake-up Pattern Data Register */ #define CSR_ADM_WPDR 0x70 /* * 25 consecutive longword writes are issued to WPDR to * program the wake-up pattern filter. The data written * is as follows: * * XXX */ /* CSR15 - see 21140 CSR15 (Watchdog Timer) */ /* CSR16 - Assistant CSR5 (Status Register 2) */ #define CSR_ADM_ASR 0x80 /* 0 - 14: same as CSR5 */ #define ADM_ASR_AAISS 0x00080000 /* added abnormal int. sum. */ #define ADM_ASR_ANISS 0x00010000 /* added normal int. sum. */ /* XXX Receive state */ /* XXX Transmit state */ #define ADM_ASR_BET 0x03800000 /* bus error type */ #define ADM_ASR_BET_PERR 0x00000000 /* parity error */ #define ADM_ASR_BET_MABT 0x00800000 /* master abort */ #define ADM_ASR_BET_TABT 0x01000000 /* target abort */ #define ADM_ASR_PFR 0x04000000 /* PAUSE frame received */ #define ADM_ASR_TDIS 0x10000000 /* transmit def. int. status */ #define ADM_ASR_XIS 0x20000000 /* xcvr int. status */ #define ADM_ASR_REIS 0x40000000 /* receive early int. status */ #define ADM_ASR_TEIS 0x80000000 /* transmit early int. status */ /* CSR17 - Assistant CSR7 (Interrupt Enable Register 2) */ #define CSR_ADM_AIE 0x84 /* See CSR16 for valid bits */ /* CSR18 - Command Register */ #define CSR_ADM_CR 0x88 #define ADM_CR_ATUR 0x00000001 /* auto. tx underrun recover */ #define ADM_CR_SINT 0x00000002 /* software interrupt */ #define ADM_CR_DRT 0x0000000c /* drain recieve threshold */ #define ADM_CR_DRT_8LW 0x00000000 /* 8 longwords */ #define ADM_CR_DRT_16LW 0x00000004 /* 16 longwords */ #define ADM_CR_DRT_SF 0x00000008 /* store-and-forward */ #define ADM_CR_RTE 0x00000010 /* receive threshold enable */ #define ADM_CR_PAUSE 0x00000020 /* enable PAUSE function */ #define ADM_CR_RWP 0x00000040 /* reset wake-up pattern data register pointer */ /* 16 - 31 are automatically recalled from the EEPROM */ #define ADM_CR_WOL 0x00040000 /* wake-on-lan enable */ #define ADM_CR_PM 0x00080000 /* power management enable */ #define ADM_CR_RFS 0x00600000 /* Receive FIFO size */ #define ADM_CR_RFS_1K 0x00600000 /* 1K FIFO */ #define ADM_CR_RFS_2K 0x00400000 /* 2K FIFO */ #define ADM_CR_LEDMODE 0x00800000 /* LED mode */ #define ADM_CR_AUXCL 0x30000000 /* aux current load */ #define ADM_CR_D3CS 0x80000000 /* D3 cold wake up enable */ /* CSR19 - PCI bus performance counter */ #define CSR_ADM_PCIC 0x8c #define ADM_PCIC_DWCNT 0x000000ff /* double-word count of last bus-master transaction */ #define ADM_PCIC_CLKCNT 0xffff0000 /* number of PCI clocks between read request and access completed */ /* CSR20 - Power Management Control/Status Register */ #define CSR_ADM_PMCSR 0x90 /* * This register is also mapped into the PCI configuration * space as the PMCSR. */ /* CSR23 - Transmit Burst Count/Time Out Register */ #define CSR_ADM_TXBR 0x9c #define ADM_TXBR_TTO 0x00000fff /* transmit timeout */ #define ADM_TXBR_TBCNT 0x001f0000 /* transmit burst count */ /* CSR24 - Flash ROM Port Register */ #define CSR_ADM_FROM 0xa0 #define ADM_FROM_DATA 0x000000ff /* data to/from Flash */ #define ADM_FROM_ADDR 0x01ffff00 /* Flash address */ #define ADM_FROM_ADDR_SHIFT 8 #define ADM_FROM_WEN 0x04000000 /* write enable */ #define ADM_FROM_REN 0x08000000 /* read enable */ #define ADM_FROM_bra16on 0x80000000 /* pin 87 is brA16, else pin 87 is fd/col LED pin */ /* CSR25 - Physical Address Register 0 */ #define CSR_ADM_PAR0 0xa4 /* CSR26 - Physical Address Register 1 */ #define CSR_ADM_PAR1 0xa8 /* CSR27 - Multicast Address Register 0 */ #define CSR_ADM_MAR0 0xac /* CSR28 - Multicast Address Register 1 */ #define CSR_ADM_MAR1 0xb0 /* Internal PHY registers are mapped here (lower 16 bits valid) */ #define CSR_ADM_BMCR 0xb4 #define CSR_ADM_BMSR 0xb8 #define CSR_ADM_PHYIDR1 0xbc #define CSR_ADM_PHYIDR2 0xc0 #define CSR_ADM_ANAR 0xc4 #define CSR_ADM_ANLPAR 0xc8 #define CSR_ADM_ANER 0xcc /* XCVR Mode Control Register */ #define CSR_ADM_XMC 0xd0 #define ADM_XMC_LD 0x00000800 /* long distance mode (low squelch enable) */ /* XCVR Configuration Information and Interrupt Status Register */ #define CSR_ADM_XCIIS 0xd4 #define ADM_XCIIS_REF 0x0001 /* 64 error packets received */ #define ADM_XCIIS_ANPR 0x0002 /* autoneg page received */ #define ADM_XCIIS_PDF 0x0004 /* parallel detection fault */ #define ADM_XCIIS_ANAR 0x0008 /* autoneg ACK */ #define ADM_XCIIS_LS 0x0010 /* link status (1 == fail) */ #define ADM_XCIIS_RFD 0x0020 /* remote fault */ #define ADM_XCIIS_ANC 0x0040 /* autoneg completed */ #define ADM_XCIIS_PAUSE 0x0080 /* PAUSE enabled */ #define ADM_XCIIS_DUPLEX 0x0100 /* full duplex */ #define ADM_XCIIS_SPEED 0x0200 /* 100Mb/s */ /* XCVR Interrupt Enable Register */ #define CSR_ADM_XIE 0xd8 /* Bits are as for XCIIS */ /* XCVR 100baseTX PHY Control/Status Register */ #define CSR_ADM_100CTR 0xdc #define ADM_100CTR_DISCRM 0x0001 /* disable scrambler */ #define ADM_100CTR_DISMLT 0x0002 /* disable MLT3 ENDEC */ #define ADM_100CTR_CMODE 0x001c /* current operating mode */ #define ADM_100CTR_CMODE_AUTO 0x0000 /* in autoneg */ #define ADM_100CTR_CMODE_10 0x0004 /* 10baseT */ #define ADM_100CTR_CMODE_100 0x0008 /* 100baseTX */ /* 0x000c reserved */ /* 0x0010 reserved */ #define ADM_100CTR_CMODE_10FD 0x0014 /* 10baseT-FDX */ #define ADM_100CTR_CMODE_100FD 0x0018 /* 100baseTX-FDX */ #define ADM_100CTR_CMODE_ISO 0x001c /* isolated */ #define ADM_100CTR_ISOTX 0x0020 /* transmit isolation */ #define ADM_100CTR_ENRZI 0x0080 /* enable NRZ <> NRZI conv. */ #define ADM_100CTR_ENDCR 0x0100 /* enable DC restoration */ #define ADM_100CTR_ENRLB 0x0200 /* enable remote loopback */ #define ADM_100CTR_RXVPP 0x0800 /* peak Rx voltage: 0 == 1.0 VPP 1 == 1.4 VPP */ #define ADM_100CTR_ANC 0x1000 /* autoneg completed */ #define ADM_100CTR_DISRER 0x2000 /* disable Rx error counter */ #endif /* _DEV_IC_TULIPREG_H_ */