# $NetBSD: NULL,v 1.14 2003/09/27 20:51:54 is Exp $ # # This file was automatically created. Changes will be # lost when running make in this directory. # # Created from: #$ NetBSD: GENERIC,v 1.129 1999/10/15 21:50:34 is Exp $ include "arch/amigappc/conf/std.amigappc" maxusers 8 options RTC_OFFSET=0 #mainboards to support (in addition to Amiga) #options BB060STUPIDROM # You need this, if you have a non-DraCo # MC68060 with an OS ROM up to (at least) # V40 (OS3.1) and want to boot with the # bootblock. # You do not need this if you have a DraCo, # have no 68060 or NEVER use the bootblock #options P5PPC68KBOARD # Phase5 PPC/68K board support #processors this kernel should support #options PPC_OEA this is in std.amigappc options PPC604E options PPC603E #options M68060 # support for 060 #options M060SP # MC68060 software support (Required for 060) #options M68040 # support for 040 #options FPSP # MC68040 floating point support #options M68030 # support for 030 #options M68020 # support for 020/851 #options FPU_EMULATE # FPU emulation #Networking options #options INET # IP networking support (Required) #options GATEWAY # Packet forwarding #options DIRECTED_BROADCAST # Broadcast across subnets #options MROUTING # Multicast routing #options NS # XNS #options NSIP # XNS tunneling over IP #options ISO,TPIP # OSI #options EON # OSI tunneling over IP #options CCITT,LLC,HDLC # X.25 #options NETATALK # AppleTalk networking protocols #options PPP_BSDCOMP # BSD-Compress compression support for PPP #options PPP_DEFLATE # Deflate compression support for PPP #options PPP_FILTER # Active filter support for PPP (requires bpf) #options PFIL_HOOKS # pfil(9) packet filter hooks #options IPFILTER_LOG # ipmon(8) log support #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG file-system FFS # Berkeley fast file system #file-system EXT2FS # second extended file system (linux) #file-system LFS # log-structured filesystem (experimental) #file-system MFS # Memory based filesystem #file-system NFS # Network File System client side code #file-system ADOSFS # AmigaDOS file system #file-system CD9660 # ISO 9660 + Rock Ridge filesystem #file-system MSDOSFS # MS-DOS filesystem #file-system FDESC # user file descriptor filesystem #file-system KERNFS # kernel data-structure filesystem #file-system NULLFS # loopback filesystem #file-system PORTAL # Portal filesystem #file-system PROCFS # /proc filesystem #file-system UMAPFS # NULLFS + uid and gid remapping #file-system UNION # union filesystem #Filesystem options #options QUOTA # User and group quotas in FFS #options FFS_EI # FFS Endian Independant support #options NFSSERVER # Network File System server side code #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and # immutable) behave as system flags. #Compatibility options for various existing systems #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. #options COMPAT_43 # compatibility with 4.3BSD interfaces #options COMPAT_09 # compatibility with NetBSD 0.9 #options COMPAT_10 # compatibility with NetBSD 1.0 #options COMPAT_12 # compatibility with NetBSD 1.2 #options COMPAT_13 # compatibility with NetBSD 1.3 #options COMPAT_14 # compatibility with NetBSD 1.4 #options COMPAT_SUNOS # Support to run Sun (m68k) executables #options COMPAT_SVR4 # Support to run SVR4 (m68k) executables #options COMPAT_NOMID # allow nonvalid machine id executables #options COMPAT_LINUX # Support to run Linux/m68k executables options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) #Support for System V IPC facilities. #options SYSVSHM # System V-like shared memory #options SYSVMSG # System V-like messages #options SYSVSEM # System V-like semaphores #Support for various kernel options #options KTRACE # system call tracing support #options LKM # Loadable kernel modules #options INSECURE # disable kernel security levels #options SCSIVERBOSE # human readable SCSI error messages #options NTP # NTP phase/frequency locked loop options USERCONF # userconf(4) support #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) #Misc. debugging options #options DDB # Kernel debugger #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB #options DIAGNOSTIC # Extra kernel sanity checks #options DEBUG # Enable misc. kernel debugging code #options SYSCALL_DEBUG # debug all syscalls. #options SCSIDEBUG # Add SCSI debugging statements #options PANICBUTTON # Forced crash via keypress (???) #Amiga specific options #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the # first bank of RAM. (default: unlimited) #options NKPTADD=4 # set this for 4 additional KPT pages #options NKPTADDSHIFT=24 # set this for 1 additional KPT page # per 16 MB (1<<24 bytes) of RAM # define and decrease this, or define and # increase NKPTADD if you get "out of PT pages" # panics. #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete #before the 10 secondinterval ends, or that KBDRESET does work at all. #options KBDRESET # sync on Ctrl-Amiga-Amiga #These options improve performance with the built-in serial port #on slower Amigas. Try the larger buffers first then lev6_defer. #options SERIBUF_SIZE=4096 #options SEROBUF_SIZE=32 #options LEV6_DEFER # defers l6 to l4 (below serial l5) #options RETINACONSOLE # enable code to allow retina to be console #options ULOWELLCONSOLE # enable code to allow a2410 to be console #options CL5426CONSOLE # Cirrus console #options CV64CONSOLE # CyberVision console #options TSENGCONSOLE # Tseng console #options CV3DCONSOLE # CyberVision 64/3D console #options GRF_ECS # Enhanced Chip Set options GRF_NTSC # NTSC options GRF_PAL # PAL #options GRF_A2024 # Support for the A2024 options GRF_AGA # AGA Chip Set options GRF_AGA_VGA # AGA VGAONLY timing #options GRF_SUPER72 # AGA Super-72 #options KFONT_8X11 # 8x11 font #This is how you would tell the kernel the A2410 oscillator frequencies: #The used frequencies are the defaults, and do not need option setting #options ULOWELL_OSC1=36000000 #options ULOWELL_OSC2=66667000 #This is how you specify the blitting speed, higher values may speed up blits #a littel bit. If you raise this value too much some trash may appear. #the commented version is the default. #options RH_MEMCLK=61000000 #this option enables the 64 bit sprite which does not work #for quite a few people. E.g. The cursor sprite will turn to a block #when moved to the top of the screen in X. #options RH_64BIT_SPRITE #enables fast scroll code appears to now work on 040 systems. #options RETINA_SPEED_HACK #enables the Hardwarecursor which does not work on some systems. #options RH_HARDWARECURSOR grfcc0 at mainbus0 # custom chips #grfrt0 at zbus0 # retina II #grfrh0 at zbus0 # retina III #grfcl* at zbus0 # Picasso II/Piccalo/Spectrum #grful0 at zbus0 # A2410 #grfcv0 at zbus0 # CyberVision 64 #grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) #grfcv3d0 at zbus0 # CyberVision 64/3D grf0 at grfcc0 #grf1 at grfrt0 #grf2 at grfrh0 #grf3 at grfcl? #grf4 at grful0 #grf5 at grfcv0 #grf6 at grfet? #grf7 at grfcv3d0 ite0 at grf0 # terminal emulators for grfs #ite1 at grf1 # terminal emulators for grfs #ite2 at grf2 # terminal emulators for grfs #ite3 at grf3 # terminal emulators for grfs #ite4 at grf4 # terminal emulators for grfs #ite5 at grf5 # terminal emulators for grfs #ite6 at grf6 # terminal emulators for grfs #ite7 at grf7 # terminal emulators for grfs #msc0 at zbus0 # A2232 MSC multiport serial. #mfc0 at zbus0 # MultiFaceCard I/O board #mfcs0 at mfc0 unit 0 # MFC serial #mfcs1 at mfc0 unit 1 # MFC serial #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] #mfc1 at zbus0 # MultiFaceCard 2nd I/O board #mfcs2 at mfc1 unit 0 #mfcs3 at mfc1 unit 1 #mfcp1 at mfc1 unit 0 #hyper* at zbus? # zbus HyperCom3/3+/4/4+ #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 #com* at hyper? port ? # Hypercom3/4 serial ports #lpt* at hyper? port ? # Hypercom3+/4+ parallel port #Amiga Mainboard devices (sans graphics and keyboard) #ser0 at mainbus0 # Amiga onboard serial #par0 at mainbus0 # Amiga onboard parallel ms* at mainbus0 # Amiga mice #fdc0 at mainbus0 # Amiga FDC #fd* at fdc0 unit ? # floppy disks on the later a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock #a2kbbc0 at mainbus0 # A2000 battery backed clock #aucc* at mainbus0 # Amiga CC audio #audio* at aucc? #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) #Alas, Melody-Z2 dont configure in the DraCo bus. #melody* at zbus0 # Melody MPEG audio decoder #audio* at melody? #Ethernet cards: #le* at zbus0 # A2065, Ameristar, Ariadne #ne* at zbus0 # AriadneII #ed* at zbus0 # Hydra, ASDG LanRover #es* at zbus0 # CEI A4066 EthernetPLUS #qn* at zbus0 # Quicknet #bah* at zbus0 # C=/Ameristar A2060 / 560 #Greater Valley Product Bus #gvpbus* at zbus0 #scsi stuff, all possible #gtsc0 at gvpbus? # GVP series II scsi #scsibus* at gtsc0 #ahsc0 at mainbus0 # A3000 scsi #scsibus* at ahsc0 #atzsc0 at zbus0 # A2091 scsi #scsibus* at atzsc0 #wstsc0 at zbus0 # Wordsync II scsi #scsibus* at wstsc0 #ivsc0 at zbus0 # IVS scsi #scsibus* at ivsc0 #mlhsc0 at zbus0 # Hacker scsi #scsibus* at mlhsc0 #otgsc0 at zbus0 # 12 gauge scsi #scsibus* at otgsc0 #zssc0 at zbus0 # Zeus scsi #scsibus* at zssc0 #mgnsc0 at zbus0 # Magnum scsi #scsibus* at mgnsc0 #wesc0 at zbus0 # Warp Engine scsi #scsibus* at wesc0 #afsc0 at zbus0 # A4091 scsi #scsibus* at afsc0 #aftsc0 at mainbus0 # A4000T scsi #scsibus* at aftsc0 #flsc0 at zbus0 # FastlaneZ3 scsi #scsibus* at flsc0 #bzsc0 at zbus0 # Blizzard 1230 I,II scsi #scsibus* at bzsc0 #bzivsc0 at zbus0 # Blizzard 12x0 IV scsi #scsibus* at bzivsc0 #bztzsc0 at zbus0 # Blizzard 2060 scsi #scsibus* at bztzsc0 #cbsc0 at zbus0 # CyberSCSI I #scsibus* at cbsc0 #cbiisc0 at zbus0 # CyberSCSI II #scsibus* at cbiisc0 #cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI #scsibus* at cbiiisc0 #empsc0 at zbus0 # Emplant scsi #scsibus* at empsc0 #idesc0 at mainbus0 # A4000 & A1200 IDE #scsibus* at idesc0 #each hard drive from low target to high #will configure to the next available sd unit number #sd* at scsibus? target ? lun ? # scsi disks #st* at scsibus? target ? lun ? # scsi tapes #cd* at scsibus? target ? lun ? # scsi cds #ss* at scsibus? target ? lun ? # scsi scanner #ch* at scsibus? target ? lun ? # scsi autochangers #uk* at scsibus? target ? lun ? # scsi unknown #pseudo-device loop # loopback network interface #pseudo-device sl 1 # SLIP network interfaces #pseudo-device ppp 1 # PPP network interfaces #pseudo-device tun 1 # network tunnel line discipline #pseudo-device gre 2 # generic L3 over IP tunnel #pseudo-device bpfilter 16 # Berkeley packet filter #pseudo-device ipfilter # IP Filter package pseudo-device view 4 # views (needed for grfcc) pseudo-device pty # pseudo-terminals #pseudo-device vnd 4 # vnode pseudo-disks #pseudo-device ccd 4 # concatenated disk devices #pseudo-device raid 4 # RAIDframe disk driver #rnd is EXPERIMENTAL at this point. #pseudo-device rnd # /dev/random and in-kernel generator #options RND_COM # use "com" randomness as well (BROKEN) config netbsd root on ? type ?