/* $NetBSD: if_wi_pci.c,v 1.45 2008/04/28 20:23:55 martin Exp $ */ /*- * Copyright (c) 2001 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Hideaki Imaizumi * and Ichiro FUKUHARA (ichiro@ichiro.org). * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * PCI bus front-end for the Intersil PCI WaveLan. * Works with Prism2.5 Mini-PCI wavelan. */ #include __KERNEL_RCSID(0, "$NetBSD: if_wi_pci.c,v 1.45 2008/04/28 20:23:55 martin Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define WI_PCI_CBMA 0x10 /* Configuration Base Memory Address */ #define WI_PCI_PLX_LOMEM 0x10 /* PLX chip membase */ #define WI_PCI_PLX_LOIO 0x14 /* PLX chip iobase */ #define WI_PCI_LOMEM 0x18 /* ISA membase */ #define WI_PCI_LOIO 0x1C /* ISA iobase */ #define CHIP_PLX_OTHER 0x01 #define CHIP_PLX_9052 0x02 #define CHIP_TMD_7160 0x03 #define WI_PLX_COR_OFFSET 0x3E0 #define WI_PLX_COR_VALUE 0x41 struct wi_pci_softc { struct wi_softc psc_wi; /* real "wi" softc */ /* PCI-specific goo */ pci_intr_handle_t psc_ih; pci_chipset_tag_t psc_pc; pcitag_t psc_pcitag; }; static int wi_pci_match(struct device *, struct cfdata *, void *); static void wi_pci_attach(struct device *, struct device *, void *); static int wi_pci_enable(struct wi_softc *); static void wi_pci_disable(struct wi_softc *); static void wi_pci_reset(struct wi_softc *); static const struct wi_pci_product *wi_pci_lookup(struct pci_attach_args *); CFATTACH_DECL(wi_pci, sizeof(struct wi_pci_softc), wi_pci_match, wi_pci_attach, NULL, NULL); static const struct wi_pci_product { pci_vendor_id_t wpp_vendor; /* vendor ID */ pci_product_id_t wpp_product; /* product ID */ int wpp_chip; /* uses other chip */ } wi_pci_products[] = { { PCI_VENDOR_GLOBALSUN, PCI_PRODUCT_GLOBALSUN_GL24110P, CHIP_PLX_OTHER }, { PCI_VENDOR_GLOBALSUN, PCI_PRODUCT_GLOBALSUN_GL24110P02, CHIP_PLX_OTHER }, { PCI_VENDOR_EUMITCOM, PCI_PRODUCT_EUMITCOM_WL11000P, CHIP_PLX_OTHER }, { PCI_VENDOR_3COM, PCI_PRODUCT_3COM_3CRWE777A, CHIP_PLX_OTHER }, { PCI_VENDOR_NETGEAR, PCI_PRODUCT_NETGEAR_MA301, CHIP_PLX_OTHER }, { PCI_VENDOR_INTERSIL, PCI_PRODUCT_INTERSIL_MINI_PCI_WLAN, 0 }, { PCI_VENDOR_NDC, PCI_PRODUCT_NDC_NCP130, CHIP_PLX_9052 }, { PCI_VENDOR_USR2, PCI_PRODUCT_USR2_2415, CHIP_PLX_OTHER }, { PCI_VENDOR_NDC, PCI_PRODUCT_NDC_NCP130A2, CHIP_TMD_7160 }, { 0, 0, 0}, }; static int wi_pci_enable(struct wi_softc *sc) { struct wi_pci_softc *psc = (struct wi_pci_softc *)sc; /* establish the interrupt. */ sc->sc_ih = pci_intr_establish(psc->psc_pc, psc->psc_ih, IPL_NET, wi_intr, sc); if (sc->sc_ih == NULL) { aprint_error_dev(&sc->sc_dev, "couldn't establish interrupt\n"); return (EIO); } /* reset HFA3842 MAC core */ if (sc->sc_reset != NULL) wi_pci_reset(sc); return (0); } static void wi_pci_disable(struct wi_softc *sc) { struct wi_pci_softc *psc = (struct wi_pci_softc *)sc; pci_intr_disestablish(psc->psc_pc, sc->sc_ih); } static void wi_pci_reset(struct wi_softc *sc) { int i, secs, usecs; bus_space_write_2(sc->sc_iot, sc->sc_ioh, WI_PCI_COR, WI_COR_SOFT_RESET); DELAY(250*1000); /* 1/4 second */ bus_space_write_2(sc->sc_iot, sc->sc_ioh, WI_PCI_COR, WI_COR_CLEAR); DELAY(500*1000); /* 1/2 second */ /* wait 2 seconds for firmware to complete initialization. */ for (i = 200000; i--; DELAY(10)) if (!(CSR_READ_2(sc, WI_COMMAND) & WI_CMD_BUSY)) break; if (i < 0) { printf("%s: PCI reset timed out\n", device_xname(&sc->sc_dev)); } else if (sc->sc_if.if_flags & IFF_DEBUG) { usecs = (200000 - i) * 10; secs = usecs / 1000000; usecs %= 1000000; printf("%s: PCI reset in %d.%06d seconds\n", device_xname(&sc->sc_dev), secs, usecs); } return; } static const struct wi_pci_product * wi_pci_lookup(struct pci_attach_args *pa) { const struct wi_pci_product *wpp; for (wpp = wi_pci_products; wpp->wpp_vendor != 0; wpp++) { if (PCI_VENDOR(pa->pa_id) == wpp->wpp_vendor && PCI_PRODUCT(pa->pa_id) == wpp->wpp_product) return (wpp); } return (NULL); } static int wi_pci_match(struct device *parent, struct cfdata *match, void *aux) { struct pci_attach_args *pa = aux; if (wi_pci_lookup(pa) != NULL) return (1); return (0); } static void wi_pci_attach(struct device *parent, struct device *self, void *aux) { struct wi_pci_softc *psc = (struct wi_pci_softc *)self; struct wi_softc *sc = &psc->psc_wi; struct pci_attach_args *pa = aux; pci_chipset_tag_t pc = pa->pa_pc; const char *intrstr; const struct wi_pci_product *wpp; pci_intr_handle_t ih; bus_space_tag_t memt, iot, plxt, tmdt; bus_space_handle_t memh, ioh, plxh, tmdh; psc->psc_pc = pc; psc->psc_pcitag = pa->pa_tag; wpp = wi_pci_lookup(pa); #ifdef DIAGNOSTIC if (wpp == NULL) { printf("\n"); panic("wi_pci_attach: impossible"); } #endif switch (wpp->wpp_chip) { case CHIP_PLX_OTHER: case CHIP_PLX_9052: /* Map memory and I/O registers. */ if (pci_mapreg_map(pa, WI_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0, &memt, &memh, NULL, NULL) != 0) { printf(": can't map mem space\n"); return; } if (pci_mapreg_map(pa, WI_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0, &iot, &ioh, NULL, NULL) != 0) { printf(": can't map I/O space\n"); return; } if (wpp->wpp_chip == CHIP_PLX_OTHER) { /* The PLX 9052 doesn't have IO at 0x14. Perhaps other chips have, so we'll make this conditional. */ if (pci_mapreg_map(pa, WI_PCI_PLX_LOIO, PCI_MAPREG_TYPE_IO, 0, &plxt, &plxh, NULL, NULL) != 0) { printf(": can't map PLX\n"); return; } } break; case CHIP_TMD_7160: /* Used instead of PLX on at least one revision of * the National Datacomm Corporation NCP130. Values * for registers acquired from OpenBSD, which in * turn got them from a Linux driver. */ /* Map COR and I/O registers. */ if (pci_mapreg_map(pa, WI_TMD_COR, PCI_MAPREG_TYPE_IO, 0, &tmdt, &tmdh, NULL, NULL) != 0) { printf(": can't map TMD\n"); return; } if (pci_mapreg_map(pa, WI_TMD_IO, PCI_MAPREG_TYPE_IO, 0, &iot, &ioh, NULL, NULL) != 0) { printf(": can't map I/O space\n"); return; } break; default: if (pci_mapreg_map(pa, WI_PCI_CBMA, PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT, 0, &iot, &ioh, NULL, NULL) != 0) { printf(": can't map mem space\n"); return; } memt = iot; memh = ioh; sc->sc_pci = 1; break; } { char devinfo[256]; pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo, sizeof(devinfo)); printf(": %s (rev. 0x%02x)\n", devinfo, PCI_REVISION(pa->pa_class)); } sc->sc_enabled = 1; sc->sc_enable = wi_pci_enable; sc->sc_disable = wi_pci_disable; sc->sc_iot = iot; sc->sc_ioh = ioh; /* Make sure interrupts are disabled. */ CSR_WRITE_2(sc, WI_INT_EN, 0); CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF); if (wpp->wpp_chip == CHIP_PLX_OTHER) { uint32_t command; #define WI_LOCAL_INTCSR 0x4c #define WI_LOCAL_INTEN 0x40 /* poke this into INTCSR */ command = bus_space_read_4(plxt, plxh, WI_LOCAL_INTCSR); command |= WI_LOCAL_INTEN; bus_space_write_4(plxt, plxh, WI_LOCAL_INTCSR, command); } /* Map and establish the interrupt. */ if (pci_intr_map(pa, &ih)) { aprint_error_dev(self, "couldn't map interrupt\n"); return; } intrstr = pci_intr_string(pc, ih); psc->psc_ih = ih; sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, wi_intr, sc); if (sc->sc_ih == NULL) { aprint_error_dev(self, "couldn't establish interrupt"); if (intrstr != NULL) printf(" at %s", intrstr); printf("\n"); return; } printf("%s: interrupting at %s\n", device_xname(self), intrstr); switch (wpp->wpp_chip) { case CHIP_PLX_OTHER: case CHIP_PLX_9052: /* * Setup the PLX chip for level interrupts and config index 1 * XXX - should really reset the PLX chip too. */ bus_space_write_1(memt, memh, WI_PLX_COR_OFFSET, WI_PLX_COR_VALUE); break; case CHIP_TMD_7160: /* Enable I/O mode and level interrupts on the embedded * card. The card's COR is the first byte of BAR 0. */ bus_space_write_1(tmdt, tmdh, 0, WI_COR_IOMODE); break; default: /* reset HFA3842 MAC core */ wi_pci_reset(sc); break; } printf("%s:", device_xname(self)); if (wi_attach(sc, 0) != 0) { aprint_error_dev(self, "failed to attach controller\n"); pci_intr_disestablish(pa->pa_pc, sc->sc_ih); return; } if (!wpp->wpp_chip) sc->sc_reset = wi_pci_reset; if (!pmf_device_register(self, NULL, NULL)) aprint_error_dev(self, "couldn't establish power handler\n"); else pmf_class_network_register(self, &sc->sc_if); }