/* $NetBSD: st.c,v 1.34 2002/09/27 20:31:55 thorpej Exp $ */ /*- * Copyright (c) 1996, 1997 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1990 University of Utah. * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: st.c 1.11 92/01/21$ * * @(#)st.c 8.3 (Berkeley) 1/12/94 */ /* * SCSI CCS (Command Command Set) tape driver. * * Specific to Exabyte: * mt status: residual="Mbytes to LEOM" * minor bit 4 [b1bbbb] (aka /dev/rst16) selects short filemarks * minor bit 5 [1bbbbb] (aka /dev/rst32) selects fix block mode, 1k blocks. * * Archive drive: * can read both QIC-24 and QIC-II. But only writes * QIC-24. * * Supports Archive Viper QIC-150 tape drive, but scsi.c reports selection * errors. * * Supports Archive Python DAT drive, but will sometimes hang machine. * * Supports HP 35450A DAT drive, but will sometimes hang machine. * Partitioning of tape not supported. * Vendor unique support has not been added. * * * Supports Archive VIPER (QIC-150). * Mostly Supports Archive PYTHON (DAT). * Hangs if write after spin down. * Need scsi.c that does connect/disconnect. */ /* * support for the block device not implemented */ #include __KERNEL_RCSID(0, "$NetBSD: st.c,v 1.34 2002/09/27 20:31:55 thorpej Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static struct scsi_fmt_cdb st_read_cmd = { 6, { CMD_READ } }; static struct scsi_fmt_cdb st_write_cmd = { 6, { CMD_WRITE } }; #define UNIT(x) (minor(x) & 3) #define stpunit(x) ((x) & 7) #define STDEV_NOREWIND 0x04 #define STDEV_HIDENSITY 0x08 #define STDEV_EXSFMK 0x10 #define STDEV_FIXEDBLK 0x20 #ifdef DEBUG int st_debug = 0x0000; #define ST_OPEN 0x0001 #define ST_GO 0x0002 #define ST_FMKS 0x0004 #define ST_OPENSTAT 0x0008 #define ST_BRESID 0x0010 #define ST_ODDIO 0x0020 #endif /* * Patchable variable. If an even length read is requested a dma transfer is * used. Only after the read will we find out if the read had an odd number * of bytes. The HP98658 hardware cannot do odd length transfers, the last * byte of the data will always be 0x00. Normally, the driver will complain * about such transfers and return EIO. However, if st_dmaoddretry is non- * zero, the driver will try and issue a BSR and then re-read the data using * 'programmed transfer mode'. In most cases this works, however for unknown * reasons it will hang the machine in certain cases. * * Note: * Odd length read requests are always done using programmed transfer mode. */ int st_dmaoddretry = 0; /* * Exabyte only: * From adb can have access to fixed vs. variable length modes. * Use 0x400 for 1k (best capacity) fixed length records. * In st_open, if minor bit 4 set then 1k records are used. * If st_exblken is set to anything other than 0 we are in fixed length mode. * Minor bit 5 requests 1K fixed-length, overriding any setting of st_exblklen. */ int st_exblklen = 0; /* exabyte here for adb access, set at open time */ #define EX_CT 0x80 /* international cart - more space W/P6 */ #define EX_ND 0x20 /* no disconnect */ #define EX_NBE 0x08 /* no busy enable */ #define EX_EBD 0x04 /* even byte disconnect */ #define EX_PE 0x02 /* parity enable */ #define EX_NAL 0x01 /* no auto load */ int st_exvup = (EX_CT|EX_ND|EX_NBE); /* vendor unique parameters */ /* * motion and reconnect thresholds guidelines: * write operation; lower motion threshold for faster transfer * raise reconnect threshold for slower transfer * read operation; lower motion threshold for slower transfer * raise reconnect threshold for faster transfer */ int st_exmotthr = 0x80; /* motion threshold, 0x80 default */ int st_exreconthr = 0xa0; /* reconnect threshold, 0xa0 default */ int st_exgapthr = 7; /* gap threshold, 7 default */ #ifdef TTI int st_extti = 0x01; /* bitmask of unit numbers, do extra */ /* sensing so TTi display gets updated */ #endif #ifdef DEBUG void dumpxsense __P((struct st_xsense *)); void prtmodsel __P((struct mode_select_data *, int)); void prtmodstat __P((struct mode_sense *)); #endif /* DEBUG */ static void stfinish __P((struct st_softc *, struct buf *)); static void sterror __P((struct st_softc *, int)); static int stmatch __P((struct device *, struct cfdata *, void *)); static void stattach __P((struct device *, struct device *, void *)); const struct cfattach st_ca = { sizeof(struct st_softc), stmatch, stattach }; extern struct cfdriver st_cd; dev_type_open(stopen); dev_type_close(stclose); dev_type_read(stread); dev_type_write(stwrite); dev_type_ioctl(stioctl); dev_type_strategy(ststrategy); const struct bdevsw st_bdevsw = { stopen, stclose, ststrategy, stioctl, nodump, nosize, D_TAPE }; const struct cdevsw st_cdevsw = { stopen, stclose, stread, stwrite, stioctl, nostop, notty, nopoll, nommap, D_TAPE }; static int stmatch(parent, match, aux) struct device *parent; struct cfdata *match; void *aux; { struct oscsi_attach_args *osa = aux; if ((osa->osa_inqbuf->type != 0x01 || /* sequential access device */ osa->osa_inqbuf->qual != 0x80 || /* removable media */ (osa->osa_inqbuf->version != 0x01 && osa->osa_inqbuf->version != 0x02)) && (osa->osa_inqbuf->type != 0x01 || /* M4 ??! */ /* * the M4 is a little too smart (ass?) for its own good: * qual codes: * 0x80: you can take the tape out (unit not online) * 0xf8: online and at 6250bpi * 0xf9: online and at 1600bpi */ osa->osa_inqbuf->version != 0x09)) /* M4 tape */ return (0); return (1); } static void stattach(parent, self, aux) struct device *parent, *self; void *aux; { struct st_softc *sc = (struct st_softc *)self; struct oscsi_attach_args *osa = aux; char vendor[9], product[17], revision[5]; int stat; static int havest = 0; printf("\n"); bufq_alloc(&sc->sc_tab, BUFQ_FCFS); memset(vendor, 0, sizeof(vendor)); memset(product, 0, sizeof(product)); memset(revision, 0, sizeof(revision)); scsi_str(osa->osa_inqbuf->vendor_id, vendor, sizeof(osa->osa_inqbuf->vendor_id)); scsi_str(osa->osa_inqbuf->product_id, product, sizeof(osa->osa_inqbuf->product_id)); scsi_str(osa->osa_inqbuf->rev, revision, sizeof(osa->osa_inqbuf->rev)); sc->sc_target = osa->osa_target; sc->sc_lun = osa->osa_lun; /* Initialize SCSI queue entry. */ sc->sc_sq.sq_softc = sc; sc->sc_sq.sq_target = sc->sc_target; sc->sc_sq.sq_lun = sc->sc_lun; sc->sc_sq.sq_start = ststart; sc->sc_sq.sq_go = stgo; sc->sc_sq.sq_intr = stintr; if (memcmp("EXB-8200", product, 8) == 0) { sc->sc_tapeid = MT_ISEXABYTE; sc->sc_datalen[CMD_REQUEST_SENSE] = 26; sc->sc_datalen[CMD_INQUIRY] = 52; sc->sc_datalen[CMD_MODE_SELECT] = 17; sc->sc_datalen[CMD_MODE_SENSE] = 17; } else if (memcmp("VIPER 150", product, 9) == 0 || memcmp("VIPER 60", product, 8) == 0) { sc->sc_tapeid = MT_ISVIPER1; sc->sc_datalen[CMD_REQUEST_SENSE] = 14; sc->sc_datalen[CMD_INQUIRY] = 36; sc->sc_datalen[CMD_MODE_SELECT] = 12; sc->sc_datalen[CMD_MODE_SENSE] = 12; } else if (memcmp("Python 25501", product, 12) == 0 || memcmp("Python 28849", product, 12) == 0) { sc->sc_tapeid = MT_ISPYTHON; sc->sc_datalen[CMD_REQUEST_SENSE] = 14; sc->sc_datalen[CMD_INQUIRY] = 36; sc->sc_datalen[CMD_MODE_SELECT] = 12; sc->sc_datalen[CMD_MODE_SENSE] = 12; } else if (memcmp("HP35450A", product, 8) == 0 || memcmp("HP35470A", product, 8) == 0) { /* XXX "extra" stat makes the HP drive happy at boot time */ stat = scsi_test_unit_rdy(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun); sc->sc_tapeid = MT_ISHPDAT; sc->sc_datalen[CMD_REQUEST_SENSE] = 14; sc->sc_datalen[CMD_INQUIRY] = 36; sc->sc_datalen[CMD_MODE_SELECT] = 12; sc->sc_datalen[CMD_MODE_SENSE] = 12; } else if (memcmp("123107 SCSI", product, 11) == 0 || memcmp("OPEN REEL TAPE", product, 14) == 0) { sc->sc_tapeid = MT_ISMFOUR; sc->sc_datalen[CMD_REQUEST_SENSE] = 8; sc->sc_datalen[CMD_INQUIRY] = 5; sc->sc_datalen[CMD_MODE_SELECT] = 12; sc->sc_datalen[CMD_MODE_SENSE] = 12; } else { printf("%s: Unsupported tape device, faking it\n", sc->sc_dev.dv_xname); sc->sc_tapeid = MT_ISAR; sc->sc_datalen[CMD_REQUEST_SENSE] = 8; sc->sc_datalen[CMD_INQUIRY] = 5; sc->sc_datalen[CMD_MODE_SELECT] = 12; sc->sc_datalen[CMD_MODE_SENSE] = 12; } sc->sc_filepos = 0; /* load xsense */ scsi_delay(-1); stxsense(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, sc); scsi_delay(0); /* XXX if we have a tape, we must up the delays in the HA driver */ if (!havest) { havest = 1; scsi_delay(20000); } sc->sc_blkno = 0; sc->sc_flags = STF_ALIVE; } int stopen(dev, flag, type, p) dev_t dev; int flag, type; struct proc *p; { struct st_softc *sc; struct st_xsense *xsense; int count; int stat; int ctlr, slave, unit; struct mode_select_data msd; struct mode_sense mode; int modlen; int error; static struct scsi_fmt_cdb modsel = { 6, { CMD_MODE_SELECT, 0, 0, 0, sizeof(msd), 0 } }; static struct scsi_fmt_cdb modsense = { 6, { CMD_MODE_SENSE, 0, 0, 0, sizeof(mode), 0 } }; if (UNIT(dev) > st_cd.cd_ndevs || (sc = st_cd.cd_devs[UNIT(dev)]) == NULL || (sc->sc_flags & STF_ALIVE) == 0) return (ENXIO); if (sc->sc_flags & STF_OPEN) return (EBUSY); ctlr = sc->sc_dev.dv_parent->dv_unit; slave = sc->sc_target; unit = sc->sc_lun; xsense = &sc->sc_sense; /* * Be prepared to print error messages */ sc->sc_ctty = tprintf_open(p); /* do a mode sense to get current */ modlen = sc->sc_datalen[CMD_MODE_SENSE]; modsense.cdb[4] = modlen; stat = scsi_immed_command(ctlr, slave, unit, &modsense, (u_char *)&mode, modlen, B_READ); /* do a mode sense to get current */ modlen = sc->sc_datalen[CMD_MODE_SENSE]; modsense.cdb[4] = modlen; stat = scsi_immed_command(ctlr, slave, unit, &modsense, (u_char *)&mode, modlen, B_READ); /* set record length */ switch (sc->sc_tapeid) { case MT_ISAR: sc->sc_blklen = 512; break; case MT_ISEXABYTE: if (minor(dev) & STDEV_FIXEDBLK) sc->sc_blklen = 0x400; else sc->sc_blklen = st_exblklen; break; case MT_ISHPDAT: sc->sc_blklen = 512; break; case MT_ISVIPER1: sc->sc_blklen = 512; break; case MT_ISPYTHON: sc->sc_blklen = 512; break; case MT_ISMFOUR: sc->sc_blklen = 0; break; default: if ((mode.md.blklen2 << 16 | mode.md.blklen1 << 8 | mode.md.blklen0) != 0) sc->sc_blklen = mode.md.blklen2 << 16 | mode.md.blklen1 << 8 | mode.md.blklen0; else sc->sc_blklen = 512; } /* setup for mode select */ msd.rsvd1 = 0; msd.rsvd2 = 0; msd.rsvd3 = 0; msd.buff = 1; msd.speed = 0; msd.blkdeslen = 0x08; msd.density = 0; msd.blks2 = 0; msd.blks1 = 0; msd.blks0 = 0; msd.rsvd4 = 0; msd.blklen2 = (sc->sc_blklen >> 16) & 0xff; msd.blklen1 = (sc->sc_blklen >> 8) & 0xff; msd.blklen0 = sc->sc_blklen & 0xff; /* * Do we have any density problems? */ switch (sc->sc_tapeid) { case MT_ISAR: if (minor(dev) & STDEV_HIDENSITY) msd.density = 0x5; else { if (flag & FWRITE) { uprintf("Can only write QIC-24\n"); return(EIO); } msd.density = 0x4; } break; case MT_ISEXABYTE: if (minor(dev) & STDEV_HIDENSITY) uprintf("EXB-8200 density support only\n"); msd.vupb = (u_char)st_exvup; msd.rsvd5 = 0; msd.p5 = 0; msd.motionthres = (u_char)st_exmotthr; msd.reconthres = (u_char)st_exreconthr; msd.gapthres = (u_char)st_exgapthr; break; case MT_ISHPDAT: case MT_ISVIPER1: case MT_ISPYTHON: if (minor(dev) & STDEV_HIDENSITY) uprintf("Only one density supported\n"); break; case MT_ISMFOUR: break; /* XXX could do density select? */ default: uprintf("Unsupported drive\n"); return(EIO); } modlen = sc->sc_datalen[CMD_MODE_SELECT]; modsel.cdb[4] = modlen; /* mode select */ count = 0; retryselect: stat = scsi_immed_command(ctlr, slave, unit, &modsel, (u_char *)&msd, modlen, B_WRITE); /* * First command after power cycle, bus reset or tape change * will error. Try command again */ if (stat == STS_CHECKCOND) { sc->sc_filepos = 0; stxsense(ctlr, slave, unit, sc); stat = scsi_immed_command(ctlr, slave, unit, &modsel, (u_char *)&msd, modlen, B_WRITE); #ifdef DEBUG if (stat && (st_debug & ST_OPEN)) printf("stopen: stat on mode select 0x%x second try\n", stat); #endif if (stat == STS_CHECKCOND) { stxsense(ctlr, slave, unit, sc); prtkey(sc); } if (stat) return(EIO); } if (stat == -1 || stat == STS_BUSY) { /* * XXX it might just be that the bus is busy because * another tape is doing a command. This would change * with connect/disconnect, ie. the other drive would * not hold onto the bus. * * Sleep on lbolt for up to 20 minutes (max time to FSF * an exabyte to EOT: 16:xx minutes) */ if (++count > 60*20) { uprintf("SCSI bus timeout\n"); return(EBUSY); } if ((error = tsleep((caddr_t)&lbolt, PZERO | PCATCH, "st_scsiwait", 0))) return (error); goto retryselect; } /* drive ready ? */ stat = scsi_test_unit_rdy(ctlr, slave, unit); if (stat == STS_CHECKCOND) { stxsense(ctlr, slave, unit, sc); switch (sc->sc_tapeid) { case MT_ISEXABYTE: if ((xsense->sc_xsense.key & XSK_NOTRDY) && xsense->exb_xsense.tnp) uprintf("no cartridge\n"); else if (xsense->sc_xsense.key & XSK_NOTRDY) uprintf("cartridge not loaded\n"); else if (xsense->sc_xsense.key & XSK_UNTATTEN) { uprintf("new cart/power interrupt\n"); stat = 0; } else if ((xsense->sc_xsense.key & XSK_UNTATTEN) && xsense->exb_xsense.tnp) uprintf("cartridge unloading\n"); else prtkey(sc); break; case MT_ISMFOUR: case MT_ISAR: if (xsense->sc_xsense.key & XSK_UNTATTEN) stat = scsi_test_unit_rdy(ctlr, slave, unit); if (stat == STS_CHECKCOND) { stxsense(ctlr, slave, unit, sc); if (xsense->sc_xsense.key) prtkey(sc); } else { sc->sc_filepos = 0; /* new tape */ stat = 0; } break; case MT_ISHPDAT: case MT_ISVIPER1: case MT_ISPYTHON: if (xsense->sc_xsense.key & XSK_UNTATTEN) stat = scsi_test_unit_rdy(ctlr, slave, unit); if (stat == STS_CHECKCOND) { stxsense(ctlr, slave, unit, sc); if (xsense->sc_xsense.key) prtkey(sc); } break; default: uprintf("%s: not ready\n", sc->sc_dev.dv_xname); prtkey(sc); break; } } if (stat) return(EIO); /* mode sense */ modlen = sc->sc_datalen[CMD_MODE_SENSE]; modsense.cdb[4] = modlen; stat = scsi_immed_command(ctlr, slave, unit, &modsense, (u_char *)&mode, modlen, B_READ); #ifdef DEBUG if (st_debug & ST_OPENSTAT) prtmodstat(&mode); #endif if (stat == STS_CHECKCOND) { stxsense(ctlr, slave, unit, sc); #ifdef DEBUG if (st_debug & ST_OPEN) dumpxsense(xsense); #endif } if (stat) return(EIO); if ((flag & FWRITE) && mode.md.wp) { uprintf("st:%d write protected\n", UNIT(dev)); return(EACCES); } /* save total number of blocks on tape */ sc->sc_numblks = mode.md.numblk2 << 16 | mode.md.numblk1 << 8 | mode.md.numblk0; if (xsense->sc_xsense.eom && !(sc->sc_flags & STF_LEOT)) sc->sc_filepos = 0; #ifdef DEBUG if (st_debug & ST_FMKS) printf("%s: open filepos = %d\n", sc->sc_dev.dv_xname, sc->sc_filepos); #endif sc->sc_flags |= (STF_OPEN); if (flag & FWRITE) sc->sc_flags |= STF_WMODE; sc->sc_flags &= ~STF_MOVED; #ifdef TTI /* make stats available, also lit up TTi display */ sc->sc_tticntdwn = 100; #endif stxsense(ctlr, slave, unit, sc); return(0); } /*ARGSUSED*/ int stclose(dev, flag, mode, p) dev_t dev; int flag, mode; struct proc *p; { struct st_softc *sc = st_cd.cd_devs[UNIT(dev)]; int hit = 0; if ((sc->sc_flags & (STF_WMODE|STF_WRTTN)) == (STF_WMODE|STF_WRTTN)) { /* * Cartridge tapes don't do double EOFs on EOT. * We assume that variable-block devices use double EOF. */ stcommand(dev, MTWEOF, 1); if (sc->sc_blklen == 0) { stcommand(dev, MTWEOF, 1); stcommand(dev, MTBSR, 1); } hit++; } if ((minor(dev) & STDEV_NOREWIND) == 0) { stcommand(dev, MTREW, 1); hit++; } #ifdef NOTDEF /* wait until more stable before trying [XXX Needed ?] */ if (!hit && (sc->sc_flags & SFT_WMODE)) /* force out any any bufferd write data */ stcommand(dev, MTFSR, 0); #endif /* make stats available */ stxsense(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, sc); sc->sc_flags &= ~(STF_OPEN|STF_WMODE|STF_WRTTN); tprintf_close(sc->sc_ctty); return(0); /* XXX */ } void ststrategy(bp) struct buf *bp; { struct st_softc *sc; int unit, s; unit = UNIT(bp->b_dev); sc = st_cd.cd_devs[unit]; s = splbio(); BUFQ_PUT(&sc->sc_tab, bp); if (sc->sc_active == 0) { sc->sc_active = 1; stustart(unit); } splx(s); } void stustart(unit) int unit; { struct st_softc *sc = st_cd.cd_devs[unit]; if (scsireq(sc->sc_dev.dv_parent, &sc->sc_sq)) ststart(sc); } void ststart(arg) void *arg; { struct st_softc *sc = arg; if (scsiustart(sc->sc_dev.dv_parent->dv_unit)) stgo(arg); } void stgo(arg) void *arg; { struct st_softc *sc = arg; struct scsi_fmt_cdb *cmd; struct buf *bp = BUFQ_PEEK(&sc->sc_tab); int pad, stat; long nblks; if (sc->sc_flags & STF_CMD) { cmd = &sc->sc_cmdstore; pad = 0; } else { cmd = bp->b_flags & B_READ ? &st_read_cmd : &st_write_cmd; if (sc->sc_blklen) cmd->cdb[1] |= 0x01; /* fixed mode */ else cmd->cdb[1] &= 0xfe; if (bp->b_flags & B_READ) sc->sc_flags &= ~STF_WRTTN; else sc->sc_flags |= STF_WRTTN; if (sc->sc_blklen) { /* fixed mode */ nblks = bp->b_bcount / sc->sc_blklen; if (bp->b_bcount % sc->sc_blklen) { tprintf(sc->sc_ctty, "%s: I/O not block aligned %d/%ld\n", sc->sc_dev.dv_xname, sc->sc_blklen, bp->b_bcount); cmd->cdb[1] &= 0xfe; /* force error */ } } else /* variable len */ nblks = bp->b_bcount; *(u_char *)(&cmd->cdb[2]) = (u_char) (nblks >> 16); *(u_char *)(&cmd->cdb[3]) = (u_char) (nblks >> 8); *(u_char *)(&cmd->cdb[4]) = (u_char) nblks; /* * Always Zero. We are either writing in variable * length mode we are writing in fixed block mode, * or we are going to do odd length IO and are not * going to use DMA. */ pad = 0; } #ifdef DEBUG if (st_debug & ST_GO) printf("stgo: cmd len %d [0]0x%x [1]0x%x [2]0x%x [3]0x%x [4]0x%x [5]0x%x\n", cmd->len, cmd->cdb[0], cmd->cdb[1], cmd->cdb[2], cmd->cdb[3], cmd->cdb[4], cmd->cdb[5]); #endif sc->sc_flags |= STF_MOVED; if (bp->b_bcount & 1) { #ifdef DEBUG if (st_debug & ST_ODDIO) printf("%s: stgo: odd count %ld using manual transfer\n", sc->sc_dev.dv_xname, bp->b_bcount); #endif stat = scsi_tt_oddio(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, bp->b_data, bp->b_bcount, bp->b_flags, 1); if (stat == 0) { bp->b_resid = 0; stfinish(sc, bp); } } else stat = scsigo(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, bp, cmd, pad); if (stat) { bp->b_error = EIO; bp->b_flags |= B_ERROR; stxsense(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, sc); sterror(sc, stat); stfinish(sc, bp); } } static void stfinish(sc, bp) struct st_softc *sc; struct buf *bp; { sc->sc_errcnt = 0; (void)BUFQ_GET(&sc->sc_tab); biodone(bp); scsifree(sc->sc_dev.dv_parent, &sc->sc_sq); if (BUFQ_PEEK(&sc->sc_tab) != NULL) stustart(sc->sc_dev.dv_unit); else sc->sc_active = 0; } int stread(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { return (physio(ststrategy, NULL, dev, B_READ, minphys, uio)); } int stwrite(dev, uio, flags) dev_t dev; struct uio *uio; int flags; { /* XXX: check for hardware write-protect? */ return (physio(ststrategy, NULL, dev, B_WRITE, minphys, uio)); } /*ARGSUSED*/ int stioctl(dev, cmd, data, flag, p) dev_t dev; u_long cmd; caddr_t data; int flag; struct proc *p; { struct st_softc *sc = st_cd.cd_devs[UNIT(dev)]; int cnt; struct mtget *mtget; struct st_xsense *xp = &sc->sc_sense; struct mtop *op; long resid = 0; /* XXX compiler complains needlessly :-( */ switch (cmd) { /* tape operation */ case MTIOCTOP: op = (struct mtop *)data; switch (op->mt_op) { case MTBSR: case MTFSR: if (sc->sc_tapeid == MT_ISAR) return(ENXIO); case MTWEOF: case MTFSF: case MTBSF: cnt = (int)op->mt_count; break; case MTREW: case MTOFFL: cnt = 1; break; case MTNOP: return(0); default: return(EINVAL); } if (cnt <= 0) return(EINVAL); stcommand(dev, (u_int)op->mt_op, cnt); break; /* drive status */ case MTIOCGET: mtget = (struct mtget *)data; stxsense(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, sc); mtget->mt_type = sc->sc_tapeid; mtget->mt_dsreg = 0; mtget->mt_erreg = ((xp->sc_xsense.valid << 15) | (xp->sc_xsense.filemark << 14) | (xp->sc_xsense.eom << 13) | (xp->sc_xsense.ili << 12) | (xp->sc_xsense.key << 8)); if (sc->sc_tapeid == MT_ISEXABYTE) { mtget->mt_dsreg = sc->sc_flags; resid = (xp->exb_xsense.tplft2 << 16 | xp->exb_xsense.tplft1 << 8 | xp->exb_xsense.tplft0); mtget->mt_resid = resid / 1000; mtget->mt_erreg |= (((xp->exb_xsense.rwerrcnt2 << 16 | xp->exb_xsense.rwerrcnt1 << 8 | xp->exb_xsense.rwerrcnt0) * 100) / (sc->sc_numblks - resid)) & 0xff; } else if (xp->sc_xsense.valid) { resid = ((xp->sc_xsense.info1 << 24) | (xp->sc_xsense.info2 << 16) | (xp->sc_xsense.info3 << 8) | (xp->sc_xsense.info4)); if (sc->sc_blklen) /* if fixed mode */ resid *= sc->sc_blklen; mtget->mt_resid = resid; } else mtget->mt_resid = 0; break; default: return(ENXIO); } return(0); } void stintr(arg, stat) void *arg; int stat; { struct st_softc *sc = arg; struct st_xsense *xp = &sc->sc_sense; struct buf *bp = BUFQ_PEEK(&sc->sc_tab); #ifdef DEBUG if (bp == NULL) { printf("%s: bp == NULL\n", sc->sc_dev.dv_xname); return; } #endif switch (stat) { /* scsi command completed ok */ case 0: bp->b_resid = 0; break; /* more status */ case STS_CHECKCOND: stxsense(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, sc); if (xp->sc_xsense.valid) { bp->b_resid = (u_long)((xp->sc_xsense.info1 << 24) | (xp->sc_xsense.info2 << 16) | (xp->sc_xsense.info3 << 8) | (xp->sc_xsense.info4)); if (sc->sc_blklen) /* fixed mode */ bp->b_resid *= sc->sc_blklen; } if (xp->sc_xsense.filemark) { sc->sc_filepos++; break; } if (xp->sc_xsense.key != XSK_NOSENCE && xp->sc_xsense.key != XSK_NOTUSED1 && xp->sc_xsense.key != XSK_NOTUSEDC && xp->sc_xsense.key != XSK_NOTUSEDE) { sterror(sc, stat); bp->b_flags |= B_ERROR; bp->b_error = EIO; break; } if (xp->sc_xsense.ili) { /* * Fixed length blocks, an error. */ if (sc->sc_blklen) { tprintf(sc->sc_ctty, "%s: Incorrect Length Indicator, blkcnt diff %ld\n", sc->sc_dev.dv_xname, sc->sc_blklen - bp->b_resid); bp->b_flags |= B_ERROR; bp->b_error = EIO; break; } /* * Variable length but read more than requested, * an error. (XXX ??? wrong for 9 track?) */ if (bp->b_resid < 0) { bp->b_resid = 0; bp->b_flags |= B_ERROR; bp->b_error = ENOMEM; break; } /* * Variable length and odd, may require special * handling. */ if (bp->b_resid & 1 && (sc->sc_tapeid != MT_ISAR)) { /* * Normal behavior, treat as an error. */ if (!st_dmaoddretry) { tprintf(sc->sc_ctty, "%s: Odd length read %ld\n", sc->sc_dev.dv_xname, bp->b_bcount - bp->b_resid); bp->b_error = EIO; bp->b_flags |= B_ERROR; break; } /* * Attempt to back up and re-read using oddio. */ #ifdef DEBUG if (st_debug & ST_ODDIO) printf("%s: stintr odd count %ld, do BSR then oddio\n", sc->sc_dev.dv_xname, bp->b_bcount - bp->b_resid); #endif stat = scsi_tt_oddio(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, 0, -1, 0, 0); if (stat == 0) stat = scsi_tt_oddio( sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, bp->b_data, bp->b_bcount - bp->b_resid, bp->b_flags, 0); if (stat) { bp->b_error = EIO; bp->b_flags |= B_ERROR; stxsense(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, sc); sterror(sc, stat); } } break; } if (xp->sc_xsense.eom) { bp->b_flags |= B_ERROR; bp->b_error = ENOSPC; break; } tprintf(sc->sc_ctty, "%s: unknown scsi error\n", sc->sc_dev.dv_xname); bp->b_flags |= B_ERROR; bp->b_error = EIO; break; default: printf("%s: stintr unknown stat 0x%x\n", sc->sc_dev.dv_xname, stat); break; } #ifdef DEBUG if ((st_debug & ST_BRESID) && bp->b_resid != 0) printf("b_resid %ld b_flags 0x%lx b_error 0x%x\n", bp->b_resid, bp->b_flags, bp->b_error); #endif /* asked for more filemarks then on tape */ if (bp->b_resid != 0 && (sc->sc_flags & STF_CMD) && sc->sc_cmd == CMD_SPACE) { sc->sc_filepos -= bp->b_resid; if (sc->sc_filepos < 0) sc->sc_filepos = 0; } #ifdef TTI if (st_extti & (1 << sc->sc_dev.dv_unit) && sc->sc_type == MT_ISEXABYTE) /* to make display lit up */ /* * XXX severe performance penality for this. * Try and throttle by not calling stxsense on every intr. * Mostly for TTi we, get a stxsense call in open and close. */ if (sc->sc_tticntdwn-- == 0) { stxsense(sc->sc_dev.dv_parent->dv_unit, sc->sc_target, sc->sc_lun, sc); sc->sc_tticntdwn = 100; } #endif stfinish(sc, bp); } void stcommand(dev, command, cnt) dev_t dev; u_int command; int cnt; { struct st_softc *sc = st_cd.cd_devs[UNIT(dev)]; struct buf *bp = &sc->sc_bufstore; struct scsi_fmt_cdb *cmd = &sc->sc_cmdstore; int cmdcnt, s; cmd->len = 6; /* all tape commands are cdb6 */ cmd->cdb[1] = sc->sc_lun; cmd->cdb[2] = cmd->cdb[3] = cmd->cdb[4] = cmd->cdb[5] = 0; cmdcnt = 0; /* * XXX Assumption is that everything except Archive can take * repeat count in cdb block. */ switch (command) { case MTWEOF: cmd->cdb[0] = CMD_WRITE_FILEMARK; if (sc->sc_tapeid != MT_ISAR) { cmdcnt = cnt; cnt = 1; } else cmdcnt = 1; *(u_char *)(&cmd->cdb[2]) = (u_char) (cmdcnt >> 16); *(u_char *)(&cmd->cdb[3]) = (u_char) (cmdcnt >> 8); *(u_char *)(&cmd->cdb[4]) = (u_char) cmdcnt; if (sc->sc_tapeid == MT_ISEXABYTE && (minor(dev) & STDEV_EXSFMK)) /* short filemarks */ cmd->cdb[5] |= 0x80; else cmd->cdb[5] &= 0x7f; break; case MTBSF: /* Archive can't back up, will not get to BSR case */ if (sc->sc_tapeid == MT_ISAR) { if ((sc->sc_filepos - cnt) < 0) { stcommand(dev, MTREW, 1); return; } cmdcnt = sc->sc_filepos - cnt + 1; stcommand(dev, MTREW, 1); stcommand(dev, MTFSF, cmdcnt); return; } case MTBSR: case MTFSR: case MTFSF: if (command == MTBSF || command == MTBSR) cnt = cnt * (-1); /* backward move */ if (command == MTFSF || command == MTBSF) cmd->cdb[1] |= 0x01; /* filemarks */ else cmd->cdb[1] |= 0x00; /* logical blocks */ if (sc->sc_tapeid != MT_ISAR) { cmdcnt = cnt; cnt = 1; } else cmdcnt = 1; *(u_char *)(&cmd->cdb[2]) = (u_char) (cmdcnt >> 16); *(u_char *)(&cmd->cdb[3]) = (u_char) (cmdcnt >> 8); *(u_char *)(&cmd->cdb[4]) = (u_char) cmdcnt; cmd->cdb[0] = CMD_SPACE; break; case MTREW: cmd->cdb[0] = CMD_REWIND; sc->sc_filepos = 0; break; case MTOFFL: cmd->cdb[0] = CMD_LOADUNLOAD; sc->sc_filepos = 0; break; default: printf("%s: stcommand bad command 0x%x\n", sc->sc_dev.dv_xname, command); } sc->sc_flags |= STF_CMD; sc->sc_cmd = cmd->cdb[0]; sc->sc_bp = bp; again: #ifdef DEBUG if (st_debug & ST_FMKS) printf("%s: stcommand filepos %d cmdcnt %d cnt %d\n", sc->sc_dev.dv_xname, sc->sc_filepos, cmdcnt, cnt); #endif s = splbio(); while (bp->b_flags & B_BUSY) { if (bp->b_flags & B_DONE) break; bp->b_flags |= B_WANTED; (void) tsleep(bp, PRIBIO, "stcmd", 0); } bp->b_flags = B_BUSY|B_READ; splx(s); bp->b_dev = dev; bp->b_bcount = 0; bp->b_resid = 0; bp->b_blkno = 0; bp->b_error = 0; ststrategy(bp); biowait(bp); if (bp->b_flags & B_WANTED) wakeup((caddr_t)bp); bp->b_flags &= B_ERROR; if (command == MTWEOF || command == MTFSF || command == MTBSF) sc->sc_filepos += cmdcnt; if (--cnt > 0) goto again; sc->sc_flags |= STF_MOVED; sc->sc_flags &= ~(STF_CMD|STF_WRTTN); } static void sterror(sc, stat) struct st_softc *sc; int stat; { /* stxsense must have been called before sterror() */ if (stat & STS_CHECKCOND) prtkey(sc); else if (stat) tprintf(sc->sc_ctty, "%s: bad scsi status 0x%x\n", sc->sc_dev.dv_xname, stat); if ((sc->sc_flags & STF_CMD) && sc->sc_cmd == CMD_SPACE) /* fsf */ sc->sc_filepos--; } void stxsense(ctlr, slave, unit, sc) int ctlr, slave, unit; struct st_softc *sc; { unsigned len; len = sc->sc_datalen[CMD_REQUEST_SENSE]; scsi_request_sense(ctlr, slave, unit, (u_char *)&sc->sc_sense, len); } void prtkey(sc) struct st_softc *sc; { struct st_xsense *xp = &sc->sc_sense; switch (xp->sc_xsense.key) { case XSK_NOSENCE: break; case XSK_NOTUSED1: case XSK_NOTUSEDC: case XSK_NOTUSEDE: break; case XSK_REVERVED: tprintf(sc->sc_ctty, "%s: Reserved sense key 0x%x\n", sc->sc_dev.dv_xname, xp->sc_xsense.key); break; case XSK_NOTRDY: tprintf(sc->sc_ctty, "%s: NOT READY\n", sc->sc_dev.dv_xname); break; case XSK_MEDERR: tprintf(sc->sc_ctty, "%s: MEDIUM ERROR\n", sc->sc_dev.dv_xname); break; case XSK_HRDWERR: tprintf(sc->sc_ctty, "%s: HARDWARE ERROR\n", sc->sc_dev.dv_xname); break; case XSK_ILLREQ: tprintf(sc->sc_ctty, "%s: ILLEGAL REQUEST\n", sc->sc_dev.dv_xname); break; case XSK_UNTATTEN: tprintf(sc->sc_ctty, "%s: UNIT ATTENTION\n", sc->sc_dev.dv_xname); break; case XSK_DATAPROT: tprintf(sc->sc_ctty, "%s: DATA PROTECT\n", sc->sc_dev.dv_xname); break; case XSK_BLNKCHK: tprintf(sc->sc_ctty, "%s: BLANK CHECK\n", sc->sc_dev.dv_xname); break; case XSK_VENDOR: tprintf(sc->sc_ctty, "%s: VENDER UNIQUE SENSE KEY ", sc->sc_dev.dv_xname); switch (sc->sc_tapeid) { case MT_ISEXABYTE: tprintf(sc->sc_ctty, "Exabyte: "); if (xp->exb_xsense.xfr) tprintf(sc->sc_ctty, "Transfer Abort Error\n"); if (xp->exb_xsense.tmd) tprintf(sc->sc_ctty, "Tape Mark Detect Error\n"); break; default: tprintf(sc->sc_ctty, "\n"); } break; case XSK_CPYABORT: tprintf(sc->sc_ctty, "%s: COPY ABORTED\n", sc->sc_dev.dv_xname); break; case XSK_ABORTCMD: tprintf(sc->sc_ctty, "%s: ABORTED COMMAND\n", sc->sc_dev.dv_xname); break; case XSK_VOLOVER: tprintf(sc->sc_ctty, "%s: VOLUME OVERFLOW\n", sc->sc_dev.dv_xname); break; default: tprintf(sc->sc_ctty, "%s: unknown sense key 0x%x\n", sc->sc_dev.dv_xname, xp->sc_xsense.key); } if (sc->sc_tapeid == MT_ISEXABYTE) { if (xp->exb_xsense.bpe) tprintf(sc->sc_ctty, "%s: Bus Parity Error", sc->sc_dev.dv_xname); if (xp->exb_xsense.fpe) tprintf(sc->sc_ctty, "%s: Formatted Buffer Parity Error", sc->sc_dev.dv_xname); if (xp->exb_xsense.eco) tprintf(sc->sc_ctty, "%s: Error Counter Overflow", sc->sc_dev.dv_xname); if (xp->exb_xsense.tme) tprintf(sc->sc_ctty, "%s: Tape Motion Error", sc->sc_dev.dv_xname); if (xp->exb_xsense.xfr) tprintf(sc->sc_ctty, "%s: Transfer About Error", sc->sc_dev.dv_xname); if (xp->exb_xsense.tmd) tprintf(sc->sc_ctty, "%s: Tape Mark Detect Error", sc->sc_dev.dv_xname); if (xp->exb_xsense.fmke) tprintf(sc->sc_ctty, "%s: Filemark Error", sc->sc_dev.dv_xname); if (xp->exb_xsense.ure) tprintf(sc->sc_ctty, "%s: Under Run Error", sc->sc_dev.dv_xname); if (xp->exb_xsense.sse) tprintf(sc->sc_ctty, "%s: Servo System Error", sc->sc_dev.dv_xname); if (xp->exb_xsense.fe) tprintf(sc->sc_ctty, "%s: Formatter Error", sc->sc_dev.dv_xname); if (xp->exb_xsense.wseb) tprintf(sc->sc_ctty, "%s: WSEB Error", sc->sc_dev.dv_xname); if (xp->exb_xsense.wseo) tprintf(sc->sc_ctty, "%s: WSEO Error", sc->sc_dev.dv_xname); } } #ifdef DEBUG void dumpxsense(sensebuf) struct st_xsense *sensebuf; { struct st_xsense *xp = sensebuf; printf("valid 0x%x errorclass 0x%x errorcode 0x%x\n", xp->sc_xsense.valid, xp->sc_xsense.class, xp->sc_xsense.code); printf("seg number 0x%x\n", xp->sc_xsense.segment); printf("FMK 0x%x EOM 0x%x ILI 0x%x RSVD 0x%x sensekey 0x%x\n", xp->sc_xsense.filemark, xp->sc_xsense.eom, xp->sc_xsense.ili, xp->sc_xsense.rsvd, xp->sc_xsense.key); printf("info 0x%lx\n", (u_long)((xp->sc_xsense.info1<<24)|(xp->sc_xsense.info2<<16)| (xp->sc_xsense.info3<<8)|(xp->sc_xsense.info4)) ); printf("ASenseL 0x%x\n", xp->sc_xsense.len); if (xp->sc_xsense.len != 0x12) /* MT_ISEXB Exabyte only ?? */ return; /* What about others */ printf("ASenseC 0x%x\n", xp->exb_xsense.addsens); printf("AsenseQ 0x%x\n", xp->exb_xsense.addsensq); printf("R/W Errors 0x%lx\n", (u_long)((xp->exb_xsense.rwerrcnt2<<16)| (xp->exb_xsense.rwerrcnt1<<8)| (xp->exb_xsense.rwerrcnt1)) ); printf("PF 0x%x BPE 0x%x FPE 0x%x ME 0x%x ECO 0x%x TME 0x%x TNP 0x%x BOT 0x%x\n", xp->exb_xsense.pf, xp->exb_xsense.bpe, xp->exb_xsense.fpe, xp->exb_xsense.me, xp->exb_xsense.eco, xp->exb_xsense.tme, xp->exb_xsense.tnp, xp->exb_xsense.bot); printf("XFR 0x%x TMD 0x%x WP 0x%x FMKE 0x%x URE 0x%x WE1 0x%x SSE 0x%x FE 0x%x\n", xp->exb_xsense.xfr, xp->exb_xsense.tmd, xp->exb_xsense.wp, xp->exb_xsense.fmke, xp->exb_xsense.ure, xp->exb_xsense.we1, xp->exb_xsense.sse, xp->exb_xsense.fe); printf("WSEB 0x%x WSEO 0x%x\n", xp->exb_xsense.wseb, xp->exb_xsense.wseo); printf("Remaining Tape 0x%lx\n", (u_long)((xp->exb_xsense.tplft2<<16)| (xp->exb_xsense.tplft1<<8)| (xp->exb_xsense.tplft0)) ); } void prtmodsel(msd, modlen) struct mode_select_data *msd; int modlen; { printf("Modsel command. len is 0x%x.\n", modlen); printf("rsvd1 0x%x rsvd2 0x%x rsvd3 0x%x bufferd 0x%x speed 0x%x bckdeslen 0x%x\n", msd->rsvd1,msd->rsvd2,msd->rsvd3,msd->buff,msd->speed,msd->blkdeslen); printf("density 0x%x blks2 0x%x blks1 0x%x blks0 0x%x rsvd 0x%x blklen2 0x%x blklen1 0x%x blklen0 0x%x\n", msd->density,msd->blks2,msd->blks1,msd->blks0,msd->rsvd4,msd->blklen2,msd->blklen1,msd->blklen0); printf("vupb 0x%x rsvd 0x%x p5 0x%x motionthres 0x%x reconthres 0x%x gapthres 0x%x \n", msd->vupb,msd->rsvd5,msd->p5,msd->motionthres,msd->reconthres,msd->gapthres); } void prtmodstat(mode) struct mode_sense *mode; { printf("Mode Status\n"); printf("sdl 0x%x medtype 0x%x wp 0x%x bfmd 0x%x speed 0x%x bdl 0x%x\n", mode->md.sdl, mode->md.medtype, mode->md.wp, mode->md.bfmd, mode->md.speed, mode->md.bdl); printf("dencod 0x%x numblk 0x%x blklen 0x%x\n", mode->md.dencod, (mode->md.numblk2<<16)|(mode->md.numblk1<<8)|(mode->md.numblk0), (mode->md.blklen2<<16)|(mode->md.blklen1<<8)|(mode->md.blklen0) ); printf("ct 0x%x nd 0x%x nbe 0x%x edb 0x%x pe 0x%x nal 0x%x p5 0x%x\n", mode->ex.ct, mode->ex.nd, mode->ex.nbe, mode->ex.ebd, mode->ex.pe, mode->ex.nal, mode->ex.p5); printf("motionthres 0x%x reconthres 0x%x gapthres 0x%x\n", mode->ex.motionthres, mode->ex.reconthres, mode->ex.gapthres); } #endif /* DEBUG */