/*- * Copyright (c) 1991 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)wdreg.h 7.1 (Berkeley) 5/9/91 * $Id: wdcreg.h,v 1.4 1994/03/02 21:43:42 mycroft Exp $ */ /* * Disk Controller register definitions. */ #define wd_data 0x0 /* data register (R/W - 16 bits) */ #define wd_error 0x1 /* error register (R) */ #define wd_precomp wd_error /* write precompensation (W) */ #define wd_seccnt 0x2 /* sector count (R/W) */ #define wd_sector 0x3 /* first sector number (R/W) */ #define wd_cyl_lo 0x4 /* cylinder address, low byte (R/W) */ #define wd_cyl_hi 0x5 /* cylinder address, high byte (R/W)*/ #define wd_sdh 0x6 /* sector size/drive/head (R/W)*/ #define wd_command 0x7 /* command register (W) */ #define wd_status wd_command /* immediate status (R) */ #define wd_altsts 0x206 /*alternate fixed disk status(via 1015) (R)*/ #define wd_ctlr 0x206 /*fixed disk controller control(via 1015) (W)*/ #define WDCTL_4BIT 0x8 /* use four head bits (wd1003) */ #define WDCTL_RST 0x4 /* reset the controller */ #define WDCTL_IDS 0x2 /* disable controller interrupts */ #define wd_digin 0x207 /* disk controller input(via 1015) (R)*/ /* * Status Bits. */ #define WDCS_BUSY 0x80 /* Controller busy bit. */ #define WDCS_READY 0x40 /* Selected drive is ready */ #define WDCS_WRTFLT 0x20 /* Write fault */ #define WDCS_SEEKCMPLT 0x10 /* Seek complete */ #define WDCS_DRQ 0x08 /* Data request bit. */ #define WDCS_ECCCOR 0x04 /* ECC correction made in data */ #define WDCS_INDEX 0x02 /* Index pulse from selected drive */ #define WDCS_ERR 0x01 /* Error detect bit. */ #define WDCS_BITS "\020\010busy\006rdy\006wrtflt\005seekdone\004drq\003ecc_cor\002index\001err" #define WDERR_BITS "\020\010badblk\007uncorr\006id_crc\005no_id\003abort\002tr000\001no_dam" /* * Commands for Disk Controller. */ #define WDCC_RESTORE 0x10 /* disk restore code -- resets cntlr */ #define WDCC_READ 0x20 /* disk read code */ #define WDCC_WRITE 0x30 /* disk write code */ #define WDCC__LONG 0x02 /* modifier -- access ecc bytes */ #define WDCC__NORETRY 0x01 /* modifier -- no retrys */ #define WDCC_FORMAT 0x50 /* disk format code */ #define WDCC_DIAGNOSE 0x90 /* controller diagnostic */ #define WDCC_IDC 0x91 /* initialize drive command */ #define WDCC_EXTDCMD 0xE0 /* send extended command */ #define WDCC_READP 0xEC /* read parameters from controller */ #define WDCC_CACHEC 0xEF /* cache control */ #define WD_STEP 0 /* winchester- default 35us step */ #define WDSD_IBM 0xa0 /* forced to 512 byte sector, ecc */ #ifdef KERNEL /* * read parameters command returns this: */ struct wdparams { /* drive info */ short wdp_config; /* general configuration */ short wdp_fixedcyl; /* number of non-removable cylinders */ short wdp_removcyl; /* number of removable cylinders */ short wdp_heads; /* number of heads */ short wdp_unfbytespertrk; /* number of unformatted bytes/track */ short wdp_unfbytes; /* number of unformatted bytes/sector */ short wdp_sectors; /* number of sectors */ short wdp_minisg; /* minimum bytes in inter-sector gap*/ short wdp_minplo; /* minimum bytes in postamble */ short wdp_vendstat; /* number of words of vendor status */ /* controller info */ char wdp_cnsn[20]; /* controller serial number */ short wdp_cntype; /* controller type */ #define WDTYPE_SINGLEPORTSECTOR 1 /* single port, single sector buffer */ #define WDTYPE_DUALPORTMULTI 2 /* dual port, multiple sector buffer */ #define WDTYPE_DUALPORTMULTICACHE 3 /* above plus track cache */ short wdp_cnsbsz; /* sector buffer size, in sectors */ short wdp_necc; /* ecc bytes appended */ char wdp_rev[8]; /* firmware revision */ char wdp_model[40]; /* model name */ short wdp_nsecperint; /* sectors per interrupt */ short wdp_usedmovsd; /* can use double word read/write? */ }; /* * wd driver entry points */ int wdprobe(struct isa_device *); int wdattach(struct isa_device *); int wdstrategy(struct buf *); void wdintr(int); int wdopen(dev_t, int, int, struct proc *); int wdclose(dev_t, int, int); int wdioctl(dev_t, int, caddr_t, int, struct proc *); /* int wdformat(struct buf *bp); */ int wdsize(dev_t); int wddump(dev_t); #endif KERNEL