/* $NetBSD: aic6360.c,v 1.79 2003/02/21 17:14:06 tsutsui Exp $ */ /* * Copyright (c) 1994, 1995, 1996 Charles M. Hannum. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Charles M. Hannum. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Copyright (c) 1994 Jarle Greipsland * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Acknowledgements: Many of the algorithms used in this driver are * inspired by the work of Julian Elischer (julian@tfs.com) and * Charles Hannum (mycroft@duality.gnu.ai.mit.edu). Thanks a million! */ /* TODO list: * 1) Get the DMA stuff working. * 2) Get the iov/uio stuff working. Is this a good thing ??? * 3) Get the synch stuff working. * 4) Rewrite it to use malloc for the acb structs instead of static alloc.? */ #include __KERNEL_RCSID(0, "$NetBSD: aic6360.c,v 1.79 2003/02/21 17:14:06 tsutsui Exp $"); #include "opt_ddb.h" #ifdef DDB #define integrate #else #define integrate static inline #endif /* * A few customizable items: */ /* Use doubleword transfers to/from SCSI chip. Note: This requires * motherboard support. Basicly, some motherboard chipsets are able to * split a 32 bit I/O operation into two 16 bit I/O operations, * transparently to the processor. This speeds up some things, notably long * data transfers. */ #define AIC_USE_DWORDS 0 /* Synchronous data transfers? */ #define AIC_USE_SYNCHRONOUS 0 #define AIC_SYNC_REQ_ACK_OFS 8 /* Wide data transfers? */ #define AIC_USE_WIDE 0 #define AIC_MAX_WIDTH 0 /* Max attempts made to transmit a message */ #define AIC_MSG_MAX_ATTEMPT 3 /* Not used now XXX */ /* Use DMA (else we do programmed I/O using string instructions) (not yet!)*/ #define AIC_USE_EISA_DMA 0 #define AIC_USE_ISA_DMA 0 /* How to behave on the (E)ISA bus when/if DMAing (on<<4) + off in us */ #define EISA_BRST_TIM ((15<<4) + 1) /* 15us on, 1us off */ /* Some spin loop parameters (essentially how long to wait some places) * The problem(?) is that sometimes we expect either to be able to transmit a * byte or to get a new one from the SCSI bus pretty soon. In order to avoid * returning from the interrupt just to get yanked back for the next byte we * may spin in the interrupt routine waiting for this byte to come. How long? * This is really (SCSI) device and processor dependent. Tuneable, I guess. */ #define AIC_MSGIN_SPIN 1 /* Will spinwait upto ?ms for a new msg byte */ #define AIC_MSGOUT_SPIN 1 /* Include debug functions? At the end of this file there are a bunch of * functions that will print out various information regarding queued SCSI * commands, driver state and chip contents. You can call them from the * kernel debugger. If you set AIC_DEBUG to 0 they are not included (the * kernel uses less memory) but you lose the debugging facilities. */ #define AIC_DEBUG 1 #define AIC_ABORT_TIMEOUT 2000 /* time to wait for abort */ /* End of customizable parameters */ #if AIC_USE_EISA_DMA || AIC_USE_ISA_DMA #error "I said not yet! Start paying attention... grumble" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef DDB #define Debugger() panic("should call debugger here (aic6360.c)") #endif /* ! DDB */ #if AIC_DEBUG int aic_debug = 0x00; /* AIC_SHOWSTART|AIC_SHOWMISC|AIC_SHOWTRACE; */ #endif void aic_minphys(struct buf *); void aic_done(struct aic_softc *, struct aic_acb *); void aic_dequeue(struct aic_softc *, struct aic_acb *); void aic_scsipi_request(struct scsipi_channel *, scsipi_adapter_req_t, void *); int aic_poll(struct aic_softc *, struct scsipi_xfer *, int); integrate void aic_sched_msgout(struct aic_softc *, u_char); integrate void aic_setsync(struct aic_softc *, struct aic_tinfo *); void aic_select(struct aic_softc *, struct aic_acb *); void aic_timeout(void *); void aic_sched(struct aic_softc *); void aic_scsi_reset(struct aic_softc *); void aic_reset(struct aic_softc *); void aic_free_acb(struct aic_softc *, struct aic_acb *); struct aic_acb* aic_get_acb(struct aic_softc *); int aic_reselect(struct aic_softc *, int); void aic_sense(struct aic_softc *, struct aic_acb *); void aic_msgin(struct aic_softc *); void aic_abort(struct aic_softc *, struct aic_acb *); void aic_msgout(struct aic_softc *); int aic_dataout_pio(struct aic_softc *, u_char *, int); int aic_datain_pio(struct aic_softc *, u_char *, int); void aic_update_xfer_mode(struct aic_softc *, int); #if AIC_DEBUG void aic_print_acb(struct aic_acb *); void aic_dump_driver(struct aic_softc *); void aic_dump6360(struct aic_softc *); void aic_show_scsi_cmd(struct aic_acb *); void aic_print_active_acb(void); #endif /* * INITIALIZATION ROUTINES (probe, attach ++) */ /* Do the real search-for-device. * Prerequisite: sc->sc_iobase should be set to the proper value */ int aic_find(bus_space_tag_t iot, bus_space_handle_t ioh) { char chip_id[sizeof(IDSTRING)]; /* For chips that support it */ int i; /* Remove aic6360 from possible powerdown mode */ bus_space_write_1(iot, ioh, DMACNTRL0, 0); /* Thanks to mark@aggregate.com for the new method for detecting * whether the chip is present or not. Bonus: may also work for * the AIC-6260! */ AIC_TRACE(("aic: probing for aic-chip\n")); /* * Linux also init's the stack to 1-16 and then clears it, * 6260's don't appear to have an ID reg - mpg */ /* Push the sequence 0,1,..,15 on the stack */ #define STSIZE 16 bus_space_write_1(iot, ioh, DMACNTRL1, 0); /* Reset stack pointer */ for (i = 0; i < STSIZE; i++) bus_space_write_1(iot, ioh, STACK, i); /* See if we can pull out the same sequence */ bus_space_write_1(iot, ioh, DMACNTRL1, 0); for (i = 0; i < STSIZE && bus_space_read_1(iot, ioh, STACK) == i; i++) ; if (i != STSIZE) { AIC_START(("STACK futzed at %d.\n", i)); return 0; } /* See if we can pull the id string out of the ID register, * now only used for informational purposes. */ memset(chip_id, 0, sizeof(chip_id)); bus_space_read_multi_1(iot, ioh, ID, chip_id, sizeof(IDSTRING) - 1); AIC_START(("AIC found ID: %s ",chip_id)); AIC_START(("chip revision %d\n", (int)bus_space_read_1(iot, ioh, REV))); return 1; } /* * Attach the AIC6360, fill out some high and low level data structures */ void aicattach(struct aic_softc *sc) { struct scsipi_adapter *adapt = &sc->sc_adapter; struct scsipi_channel *chan = &sc->sc_channel; AIC_TRACE(("aicattach ")); sc->sc_state = AIC_INIT; sc->sc_initiator = 7; sc->sc_freq = 20; /* XXXX Assume 20 MHz. */ /* * These are the bounds of the sync period, based on the frequency of * the chip's clock input and the size and offset of the sync period * register. * * For a 20MHz clock, this gives us 25, or 100nS, or 10MB/s, as a * maximum transfer rate, and 112.5, or 450nS, or 2.22MB/s, as a * minimum transfer rate. */ sc->sc_minsync = (2 * 250) / sc->sc_freq; sc->sc_maxsync = (9 * 250) / sc->sc_freq; /* * Fill in the scsipi_adapter. */ adapt->adapt_dev = &sc->sc_dev; adapt->adapt_nchannels = 1; adapt->adapt_openings = 8; adapt->adapt_max_periph = 1; adapt->adapt_request = aic_scsipi_request; adapt->adapt_minphys = aic_minphys; /* * Fill in the scsipi_channel. */ chan->chan_adapter = adapt; chan->chan_bustype = &scsi_bustype; chan->chan_channel = 0; chan->chan_ntargets = 8; chan->chan_nluns = 8; chan->chan_id = sc->sc_initiator; /* * Add reference to adapter so that we drop the reference after * config_found() to make sure the adatper is disabled. */ if (scsipi_adapter_addref(adapt) != 0) { printf("%s: unable to enable controller\n", sc->sc_dev.dv_xname); return; } aic_init(sc, 1); /* Init chip and driver */ /* * Ask the adapter what subunits are present */ sc->sc_child = config_found(&sc->sc_dev, &sc->sc_channel, scsiprint); scsipi_adapter_delref(adapt); } int aic_activate(struct device *self, enum devact act) { struct aic_softc *sc = (struct aic_softc *) self; int s, rv = 0; s = splhigh(); switch (act) { case DVACT_ACTIVATE: rv = EOPNOTSUPP; break; case DVACT_DEACTIVATE: if (sc->sc_child != NULL) rv = config_deactivate(sc->sc_child); break; } splx(s); return (rv); } int aic_detach(struct device *self, int flags) { struct aic_softc *sc = (struct aic_softc *) self; int rv = 0; if (sc->sc_child != NULL) rv = config_detach(sc->sc_child, flags); return (rv); } /* Initialize AIC6360 chip itself * The following conditions should hold: * aic_isa_probe should have succeeded, i.e. the iobase address in aic_softc * must be valid. */ void aic_reset(struct aic_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; /* * Doc. recommends to clear these two registers before * operations commence */ bus_space_write_1(iot, ioh, SCSITEST, 0); bus_space_write_1(iot, ioh, TEST, 0); /* Reset SCSI-FIFO and abort any transfers */ bus_space_write_1(iot, ioh, SXFRCTL0, CHEN | CLRCH | CLRSTCNT); /* Reset DMA-FIFO */ bus_space_write_1(iot, ioh, DMACNTRL0, RSTFIFO); bus_space_write_1(iot, ioh, DMACNTRL1, 0); /* Disable all selection features */ bus_space_write_1(iot, ioh, SCSISEQ, 0); bus_space_write_1(iot, ioh, SXFRCTL1, 0); /* Disable some interrupts */ bus_space_write_1(iot, ioh, SIMODE0, 0x00); /* Clear a slew of interrupts */ bus_space_write_1(iot, ioh, CLRSINT0, 0x7f); /* Disable some more interrupts */ bus_space_write_1(iot, ioh, SIMODE1, 0x00); /* Clear another slew of interrupts */ bus_space_write_1(iot, ioh, CLRSINT1, 0xef); /* Disable synchronous transfers */ bus_space_write_1(iot, ioh, SCSIRATE, 0); /* Haven't seen ant errors (yet) */ bus_space_write_1(iot, ioh, CLRSERR, 0x07); /* Set our SCSI-ID */ bus_space_write_1(iot, ioh, SCSIID, sc->sc_initiator << OID_S); bus_space_write_1(iot, ioh, BRSTCNTRL, EISA_BRST_TIM); } /* Pull the SCSI RST line for 500 us */ void aic_scsi_reset(struct aic_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; bus_space_write_1(iot, ioh, SCSISEQ, SCSIRSTO); delay(500); bus_space_write_1(iot, ioh, SCSISEQ, 0); delay(50); } /* * Initialize aic SCSI driver. */ void aic_init(struct aic_softc *sc, int bus_reset) { struct aic_acb *acb; int r; if (bus_reset) { aic_reset(sc); aic_scsi_reset(sc); } aic_reset(sc); if (sc->sc_state == AIC_INIT) { /* First time through; initialize. */ TAILQ_INIT(&sc->ready_list); TAILQ_INIT(&sc->nexus_list); TAILQ_INIT(&sc->free_list); sc->sc_nexus = NULL; acb = sc->sc_acb; memset(acb, 0, sizeof(sc->sc_acb)); for (r = 0; r < sizeof(sc->sc_acb) / sizeof(*acb); r++) { TAILQ_INSERT_TAIL(&sc->free_list, acb, chain); acb++; } memset(&sc->sc_tinfo, 0, sizeof(sc->sc_tinfo)); } else { /* Cancel any active commands. */ sc->sc_state = AIC_CLEANING; if ((acb = sc->sc_nexus) != NULL) { acb->xs->error = XS_DRIVER_STUFFUP; callout_stop(&acb->xs->xs_callout); aic_done(sc, acb); } while ((acb = sc->nexus_list.tqh_first) != NULL) { acb->xs->error = XS_DRIVER_STUFFUP; callout_stop(&acb->xs->xs_callout); aic_done(sc, acb); } } sc->sc_prevphase = PH_INVALID; for (r = 0; r < 8; r++) { struct aic_tinfo *ti = &sc->sc_tinfo[r]; ti->flags = 0; ti->period = ti->offset = 0; ti->width = 0; } sc->sc_state = AIC_IDLE; bus_space_write_1(sc->sc_iot, sc->sc_ioh, DMACNTRL0, INTEN); } void aic_free_acb(struct aic_softc *sc, struct aic_acb *acb) { int s; s = splbio(); acb->flags = 0; TAILQ_INSERT_HEAD(&sc->free_list, acb, chain); splx(s); } struct aic_acb * aic_get_acb(struct aic_softc *sc) { struct aic_acb *acb; int s; s = splbio(); acb = TAILQ_FIRST(&sc->free_list); if (acb != NULL) { TAILQ_REMOVE(&sc->free_list, acb, chain); acb->flags |= ACB_ALLOC; } splx(s); return (acb); } /* * DRIVER FUNCTIONS CALLABLE FROM HIGHER LEVEL DRIVERS */ /* * Expected sequence: * 1) Command inserted into ready list * 2) Command selected for execution * 3) Command won arbitration and has selected target device * 4) Send message out (identify message, eventually also sync.negotiations) * 5) Send command * 5a) Receive disconnect message, disconnect. * 5b) Reselected by target * 5c) Receive identify message from target. * 6) Send or receive data * 7) Receive status * 8) Receive message (command complete etc.) * 9) If status == SCSI_CHECK construct a synthetic request sense SCSI cmd. * Repeat 2-8 (no disconnects please...) */ /* * Perform a request from the SCSIPI midlayer. */ void aic_scsipi_request(struct scsipi_channel *chan, scsipi_adapter_req_t req, void *arg) { struct scsipi_xfer *xs; struct scsipi_periph *periph; struct aic_softc *sc = (void *)chan->chan_adapter->adapt_dev; struct aic_acb *acb; int s, flags; AIC_TRACE(("aic_request ")); switch (req) { case ADAPTER_REQ_RUN_XFER: xs = arg; periph = xs->xs_periph; AIC_CMDS(("[0x%x, %d]->%d ", (int)xs->cmd->opcode, xs->cmdlen, periph->periph_target)); if ((sc->sc_dev.dv_flags & DVF_ACTIVE) == 0) { xs->error = XS_DRIVER_STUFFUP; scsipi_done(xs); return; } flags = xs->xs_control; acb = aic_get_acb(sc); #ifdef DIAGNOSTIC /* * This should never happen as we track the resources * in the mid-layer. */ if (acb == NULL) { scsipi_printaddr(periph); printf("unable to allocate acb\n"); panic("aic_scsipi_request"); } #endif /* Initialize acb */ acb->xs = xs; acb->timeout = xs->timeout; if (xs->xs_control & XS_CTL_RESET) { acb->flags |= ACB_RESET; acb->scsipi_cmd_length = 0; acb->data_length = 0; } else { memcpy(&acb->scsipi_cmd, xs->cmd, xs->cmdlen); acb->scsipi_cmd_length = xs->cmdlen; acb->data_addr = xs->data; acb->data_length = xs->datalen; } acb->target_stat = 0; s = splbio(); TAILQ_INSERT_TAIL(&sc->ready_list, acb, chain); if (sc->sc_state == AIC_IDLE) aic_sched(sc); splx(s); if ((flags & XS_CTL_POLL) == 0) return; /* Not allowed to use interrupts, use polling instead */ if (aic_poll(sc, xs, acb->timeout)) { aic_timeout(acb); if (aic_poll(sc, xs, acb->timeout)) aic_timeout(acb); } return; case ADAPTER_REQ_GROW_RESOURCES: /* XXX Not supported. */ return; case ADAPTER_REQ_SET_XFER_MODE: { struct aic_tinfo *ti; struct scsipi_xfer_mode *xm = arg; ti = &sc->sc_tinfo[xm->xm_target]; ti->flags &= ~(DO_SYNC|DO_WIDE); ti->period = 0; ti->offset = 0; #if AIC_USE_SYNCHRONOUS if (xm->xm_mode & PERIPH_CAP_SYNC) { ti->flags |= DO_SYNC; ti->period = sc->sc_minsync; ti->offset = AIC_SYNC_REQ_ACK_OFS; } #endif #if AIC_USE_WIDE if (xm->xm_mode & PERIPH_CAP_WIDE16) { ti->flags |= DO_WIDE; ti->width = AIC_MAX_WIDTH; } #endif /* * If we're not going to negotiate, send the notification * now, since it won't happen later. */ if ((ti->flags & (DO_SYNC|DO_WIDE)) == 0) aic_update_xfer_mode(sc, xm->xm_target); return; } } } void aic_update_xfer_mode(struct aic_softc *sc, int target) { struct scsipi_xfer_mode xm; struct aic_tinfo *ti = &sc->sc_tinfo[target]; xm.xm_target = target; xm.xm_mode = 0; xm.xm_period = 0; xm.xm_offset = 0; if (ti->offset != 0) { xm.xm_mode |= PERIPH_CAP_SYNC; xm.xm_period = ti->period; xm.xm_offset = ti->offset; } switch (ti->width) { case 2: xm.xm_mode |= PERIPH_CAP_WIDE32; break; case 1: xm.xm_mode |= PERIPH_CAP_WIDE16; break; } scsipi_async_event(&sc->sc_channel, ASYNC_EVENT_XFER_MODE, &xm); } /* * Adjust transfer size in buffer structure */ void aic_minphys(struct buf *bp) { AIC_TRACE(("aic_minphys ")); if (bp->b_bcount > (AIC_NSEG << PGSHIFT)) bp->b_bcount = (AIC_NSEG << PGSHIFT); minphys(bp); } /* * Used when interrupt driven I/O isn't allowed, e.g. during boot. */ int aic_poll(struct aic_softc *sc, struct scsipi_xfer *xs, int count) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; AIC_TRACE(("aic_poll ")); while (count) { /* * If we had interrupts enabled, would we * have got an interrupt? */ if ((bus_space_read_1(iot, ioh, DMASTAT) & INTSTAT) != 0) aicintr(sc); if ((xs->xs_status & XS_STS_DONE) != 0) return 0; delay(1000); count--; } return 1; } /* * LOW LEVEL SCSI UTILITIES */ integrate void aic_sched_msgout(struct aic_softc *sc, u_char m) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; if (sc->sc_msgpriq == 0) bus_space_write_1(iot, ioh, SCSISIG, sc->sc_phase | ATNO); sc->sc_msgpriq |= m; } /* * Set synchronous transfer offset and period. */ #if !AIC_USE_SYNCHRONOUS /* ARGSUSED */ #endif integrate void aic_setsync(struct aic_softc *sc, struct aic_tinfo *ti) { #if AIC_USE_SYNCHRONOUS bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; if (ti->offset != 0) bus_space_write_1(iot, ioh, SCSIRATE, ((ti->period * sc->sc_freq) / 250 - 2) << 4 | ti->offset); else bus_space_write_1(iot, ioh, SCSIRATE, 0); #endif } /* * Start a selection. This is used by aic_sched() to select an idle target, * and by aic_done() to immediately reselect a target to get sense information. */ void aic_select(struct aic_softc *sc, struct aic_acb *acb) { struct scsipi_periph *periph = acb->xs->xs_periph; int target = periph->periph_target; struct aic_tinfo *ti = &sc->sc_tinfo[target]; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; bus_space_write_1(iot, ioh, SCSIID, sc->sc_initiator << OID_S | target); aic_setsync(sc, ti); bus_space_write_1(iot, ioh, SXFRCTL1, STIMO_256ms | ENSTIMER); /* Always enable reselections. */ bus_space_write_1(iot, ioh, SIMODE0, ENSELDI | ENSELDO); bus_space_write_1(iot, ioh, SIMODE1, ENSCSIRST | ENSELTIMO); bus_space_write_1(iot, ioh, SCSISEQ, ENRESELI | ENSELO | ENAUTOATNO); sc->sc_state = AIC_SELECTING; } int aic_reselect(struct aic_softc *sc, int message) { u_char selid, target, lun; struct aic_acb *acb; struct scsipi_periph *periph; struct aic_tinfo *ti; /* * The SCSI chip made a snapshot of the data bus while the reselection * was being negotiated. This enables us to determine which target did * the reselect. */ selid = sc->sc_selid & ~(1 << sc->sc_initiator); if (selid & (selid - 1)) { printf("%s: reselect with invalid selid %02x; " "sending DEVICE RESET\n", sc->sc_dev.dv_xname, selid); AIC_BREAK(); goto reset; } /* Search wait queue for disconnected cmd * The list should be short, so I haven't bothered with * any more sophisticated structures than a simple * singly linked list. */ target = ffs(selid) - 1; lun = message & 0x07; for (acb = sc->nexus_list.tqh_first; acb != NULL; acb = acb->chain.tqe_next) { periph = acb->xs->xs_periph; if (periph->periph_target == target && periph->periph_lun == lun) break; } if (acb == NULL) { printf("%s: reselect from target %d lun %d with no nexus; " "sending ABORT\n", sc->sc_dev.dv_xname, target, lun); AIC_BREAK(); goto abort; } /* Make this nexus active again. */ TAILQ_REMOVE(&sc->nexus_list, acb, chain); sc->sc_state = AIC_CONNECTED; sc->sc_nexus = acb; ti = &sc->sc_tinfo[target]; ti->lubusy |= (1 << lun); aic_setsync(sc, ti); if (acb->flags & ACB_RESET) aic_sched_msgout(sc, SEND_DEV_RESET); else if (acb->flags & ACB_ABORT) aic_sched_msgout(sc, SEND_ABORT); /* Do an implicit RESTORE POINTERS. */ sc->sc_dp = acb->data_addr; sc->sc_dleft = acb->data_length; sc->sc_cp = (u_char *)&acb->scsipi_cmd; sc->sc_cleft = acb->scsipi_cmd_length; return (0); reset: aic_sched_msgout(sc, SEND_DEV_RESET); return (1); abort: aic_sched_msgout(sc, SEND_ABORT); return (1); } /* * Schedule a SCSI operation. This has now been pulled out of the interrupt * handler so that we may call it from aic_scsipi_request and aic_done. This * may save us an unecessary interrupt just to get things going. Should only * be called when state == AIC_IDLE and at bio pl. */ void aic_sched(struct aic_softc *sc) { struct aic_acb *acb; struct scsipi_periph *periph; struct aic_tinfo *ti; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; if ((sc->sc_dev.dv_flags & DVF_ACTIVE) == 0) return; /* * Find first acb in ready queue that is for a target/lunit pair that * is not busy. */ bus_space_write_1(iot, ioh, CLRSINT1, CLRSELTIMO | CLRBUSFREE | CLRSCSIPERR); for (acb = sc->ready_list.tqh_first; acb != NULL; acb = acb->chain.tqe_next) { periph = acb->xs->xs_periph; ti = &sc->sc_tinfo[periph->periph_target]; if ((ti->lubusy & (1 << periph->periph_lun)) == 0) { AIC_MISC(("selecting %d:%d ", periph->periph_target, periph->periph_lun)); TAILQ_REMOVE(&sc->ready_list, acb, chain); sc->sc_nexus = acb; aic_select(sc, acb); return; } else AIC_MISC(("%d:%d busy\n", periph->periph_target, periph->periph_lun)); } AIC_MISC(("idle ")); /* Nothing to start; just enable reselections and wait. */ bus_space_write_1(iot, ioh, SIMODE0, ENSELDI); bus_space_write_1(iot, ioh, SIMODE1, ENSCSIRST); bus_space_write_1(iot, ioh, SCSISEQ, ENRESELI); } void aic_sense(struct aic_softc *sc, struct aic_acb *acb) { struct scsipi_xfer *xs = acb->xs; struct scsipi_periph *periph = xs->xs_periph; struct aic_tinfo *ti = &sc->sc_tinfo[periph->periph_target]; struct scsipi_sense *ss = (void *)&acb->scsipi_cmd; AIC_MISC(("requesting sense ")); /* Next, setup a request sense command block */ memset(ss, 0, sizeof(*ss)); ss->opcode = REQUEST_SENSE; ss->byte2 = periph->periph_lun << 5; ss->length = sizeof(struct scsipi_sense_data); acb->scsipi_cmd_length = sizeof(*ss); acb->data_addr = (char *)&xs->sense.scsi_sense; acb->data_length = sizeof(struct scsipi_sense_data); acb->flags |= ACB_SENSE; ti->senses++; if (acb->flags & ACB_NEXUS) ti->lubusy &= ~(1 << periph->periph_lun); if (acb == sc->sc_nexus) { aic_select(sc, acb); } else { aic_dequeue(sc, acb); TAILQ_INSERT_HEAD(&sc->ready_list, acb, chain); if (sc->sc_state == AIC_IDLE) aic_sched(sc); } } /* * POST PROCESSING OF SCSI_CMD (usually current) */ void aic_done(struct aic_softc *sc, struct aic_acb *acb) { struct scsipi_xfer *xs = acb->xs; struct scsipi_periph *periph = xs->xs_periph; struct aic_tinfo *ti = &sc->sc_tinfo[periph->periph_target]; AIC_TRACE(("aic_done ")); /* * Now, if we've come here with no error code, i.e. we've kept the * initial XS_NOERROR, and the status code signals that we should * check sense, we'll need to set up a request sense cmd block and * push the command back into the ready queue *before* any other * commands for this target/lunit, else we lose the sense info. * We don't support chk sense conditions for the request sense cmd. */ if (xs->error == XS_NOERROR) { if (acb->flags & ACB_ABORT) { xs->error = XS_DRIVER_STUFFUP; } else if (acb->flags & ACB_SENSE) { xs->error = XS_SENSE; } else if (acb->target_stat == SCSI_CHECK) { /* First, save the return values */ xs->resid = acb->data_length; xs->status = acb->target_stat; aic_sense(sc, acb); return; } else { xs->resid = acb->data_length; } } #if AIC_DEBUG if ((aic_debug & AIC_SHOWMISC) != 0) { if (xs->resid != 0) printf("resid=%d ", xs->resid); if (xs->error == XS_SENSE) printf("sense=0x%02x\n", xs->sense.scsi_sense.error_code); else printf("error=%d\n", xs->error); } #endif /* * Remove the ACB from whatever queue it happens to be on. */ if (acb->flags & ACB_NEXUS) ti->lubusy &= ~(1 << periph->periph_lun); if (acb == sc->sc_nexus) { sc->sc_nexus = NULL; sc->sc_state = AIC_IDLE; aic_sched(sc); } else aic_dequeue(sc, acb); aic_free_acb(sc, acb); ti->cmds++; scsipi_done(xs); } void aic_dequeue(struct aic_softc *sc, struct aic_acb *acb) { if (acb->flags & ACB_NEXUS) { TAILQ_REMOVE(&sc->nexus_list, acb, chain); } else { TAILQ_REMOVE(&sc->ready_list, acb, chain); } } /* * INTERRUPT/PROTOCOL ENGINE */ /* * Precondition: * The SCSI bus is already in the MSGI phase and there is a message byte * on the bus, along with an asserted REQ signal. */ void aic_msgin(struct aic_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_char sstat1; int n; AIC_TRACE(("aic_msgin ")); if (sc->sc_prevphase == PH_MSGIN) { /* This is a continuation of the previous message. */ n = sc->sc_imp - sc->sc_imess; goto nextbyte; } /* This is a new MESSAGE IN phase. Clean up our state. */ sc->sc_flags &= ~AIC_DROP_MSGIN; nextmsg: n = 0; sc->sc_imp = &sc->sc_imess[n]; nextbyte: /* * Read a whole message, but don't ack the last byte. If we reject the * message, we have to assert ATN during the message transfer phase * itself. */ for (;;) { for (;;) { sstat1 = bus_space_read_1(iot, ioh, SSTAT1); if ((sstat1 & (REQINIT | PHASECHG | BUSFREE)) != 0) break; /* Wait for REQINIT. XXX Need timeout. */ } if ((sstat1 & (PHASECHG | BUSFREE)) != 0) { /* * Target left MESSAGE IN, probably because it * a) noticed our ATN signal, or * b) ran out of messages. */ goto out; } /* If parity error, just dump everything on the floor. */ if ((sstat1 & SCSIPERR) != 0) { sc->sc_flags |= AIC_DROP_MSGIN; aic_sched_msgout(sc, SEND_PARITY_ERROR); } /* Gather incoming message bytes if needed. */ if ((sc->sc_flags & AIC_DROP_MSGIN) == 0) { if (n >= AIC_MAX_MSG_LEN) { (void) bus_space_read_1(iot, ioh, SCSIDAT); sc->sc_flags |= AIC_DROP_MSGIN; aic_sched_msgout(sc, SEND_REJECT); } else { *sc->sc_imp++ = bus_space_read_1(iot, ioh, SCSIDAT); n++; /* * This testing is suboptimal, but most * messages will be of the one byte variety, so * it should not affect performance * significantly. */ if (n == 1 && MSG_IS1BYTE(sc->sc_imess[0])) break; if (n == 2 && MSG_IS2BYTE(sc->sc_imess[0])) break; if (n >= 3 && MSG_ISEXTENDED(sc->sc_imess[0]) && n == sc->sc_imess[1] + 2) break; } } else (void) bus_space_read_1(iot, ioh, SCSIDAT); /* * If we reach this spot we're either: * a) in the middle of a multi-byte message, or * b) dropping bytes. */ bus_space_write_1(iot, ioh, SXFRCTL0, CHEN | SPIOEN); /* Ack the last byte read. */ (void) bus_space_read_1(iot, ioh, SCSIDAT); bus_space_write_1(iot, ioh, SXFRCTL0, CHEN); while ((bus_space_read_1(iot, ioh, SCSISIG) & ACKI) != 0) ; } AIC_MISC(("n=%d imess=0x%02x ", n, sc->sc_imess[0])); /* We now have a complete message. Parse it. */ switch (sc->sc_state) { struct aic_acb *acb; struct scsipi_periph *periph; struct aic_tinfo *ti; case AIC_CONNECTED: AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; ti = &sc->sc_tinfo[acb->xs->xs_periph->periph_target]; switch (sc->sc_imess[0]) { case MSG_CMDCOMPLETE: if (sc->sc_dleft < 0) { periph = acb->xs->xs_periph; printf("%s: %ld extra bytes from %d:%d\n", sc->sc_dev.dv_xname, (long)-sc->sc_dleft, periph->periph_target, periph->periph_lun); acb->data_length = 0; } acb->xs->resid = acb->data_length = sc->sc_dleft; sc->sc_state = AIC_CMDCOMPLETE; break; case MSG_PARITY_ERROR: /* Resend the last message. */ aic_sched_msgout(sc, sc->sc_lastmsg); break; case MSG_MESSAGE_REJECT: AIC_MISC(("message rejected %02x ", sc->sc_lastmsg)); switch (sc->sc_lastmsg) { #if AIC_USE_SYNCHRONOUS + AIC_USE_WIDE case SEND_IDENTIFY: ti->flags &= ~(DO_SYNC | DO_WIDE); ti->period = ti->offset = 0; aic_setsync(sc, ti); ti->width = 0; break; #endif #if AIC_USE_SYNCHRONOUS case SEND_SDTR: ti->flags &= ~DO_SYNC; ti->period = ti->offset = 0; aic_setsync(sc, ti); aic_update_xfer_mode(sc, acb->xs->xs_periph->periph_target); break; #endif #if AIC_USE_WIDE case SEND_WDTR: ti->flags &= ~DO_WIDE; ti->width = 0; aic_update_xfer_mode(sc, acb->xs->xs_periph->periph_target); break; #endif case SEND_INIT_DET_ERR: aic_sched_msgout(sc, SEND_ABORT); break; } break; case MSG_NOOP: break; case MSG_DISCONNECT: ti->dconns++; sc->sc_state = AIC_DISCONNECT; break; case MSG_SAVEDATAPOINTER: acb->data_addr = sc->sc_dp; acb->data_length = sc->sc_dleft; break; case MSG_RESTOREPOINTERS: sc->sc_dp = acb->data_addr; sc->sc_dleft = acb->data_length; sc->sc_cp = (u_char *)&acb->scsipi_cmd; sc->sc_cleft = acb->scsipi_cmd_length; break; case MSG_EXTENDED: switch (sc->sc_imess[2]) { #if AIC_USE_SYNCHRONOUS case MSG_EXT_SDTR: if (sc->sc_imess[1] != 3) goto reject; ti->period = sc->sc_imess[3]; ti->offset = sc->sc_imess[4]; ti->flags &= ~DO_SYNC; if (ti->offset == 0) { } else if (ti->period < sc->sc_minsync || ti->period > sc->sc_maxsync || ti->offset > 8) { ti->period = ti->offset = 0; aic_sched_msgout(sc, SEND_SDTR); } else { aic_update_xfer_mode(sc, acb->xs->xs_periph->periph_target); } aic_setsync(sc, ti); break; #endif #if AIC_USE_WIDE case MSG_EXT_WDTR: if (sc->sc_imess[1] != 2) goto reject; ti->width = sc->sc_imess[3]; ti->flags &= ~DO_WIDE; if (ti->width == 0) { } else if (ti->width > AIC_MAX_WIDTH) { ti->width = 0; aic_sched_msgout(sc, SEND_WDTR); } else { aic_update_xfer_mode(sc, acb->xs->xs_periph->periph_target); } break; #endif default: printf("%s: unrecognized MESSAGE EXTENDED; " "sending REJECT\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto reject; } break; default: printf("%s: unrecognized MESSAGE; sending REJECT\n", sc->sc_dev.dv_xname); AIC_BREAK(); reject: aic_sched_msgout(sc, SEND_REJECT); break; } break; case AIC_RESELECTED: if (!MSG_ISIDENTIFY(sc->sc_imess[0])) { printf("%s: reselect without IDENTIFY; " "sending DEVICE RESET\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto reset; } (void) aic_reselect(sc, sc->sc_imess[0]); break; default: printf("%s: unexpected MESSAGE IN; sending DEVICE RESET\n", sc->sc_dev.dv_xname); AIC_BREAK(); reset: aic_sched_msgout(sc, SEND_DEV_RESET); break; #ifdef notdef abort: aic_sched_msgout(sc, SEND_ABORT); break; #endif } bus_space_write_1(iot, ioh, SXFRCTL0, CHEN | SPIOEN); /* Ack the last message byte. */ (void) bus_space_read_1(iot, ioh, SCSIDAT); bus_space_write_1(iot, ioh, SXFRCTL0, CHEN); while ((bus_space_read_1(iot, ioh, SCSISIG) & ACKI) != 0) ; /* Go get the next message, if any. */ goto nextmsg; out: AIC_MISC(("n=%d imess=0x%02x ", n, sc->sc_imess[0])); } /* * Send the highest priority, scheduled message. */ void aic_msgout(struct aic_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; #if AIC_USE_SYNCHRONOUS struct aic_tinfo *ti; #endif u_char sstat1; int n; AIC_TRACE(("aic_msgout ")); /* Reset the FIFO. */ bus_space_write_1(iot, ioh, DMACNTRL0, RSTFIFO); /* Enable REQ/ACK protocol. */ bus_space_write_1(iot, ioh, SXFRCTL0, CHEN | SPIOEN); if (sc->sc_prevphase == PH_MSGOUT) { if (sc->sc_omp == sc->sc_omess) { /* * This is a retransmission. * * We get here if the target stayed in MESSAGE OUT * phase. Section 5.1.9.2 of the SCSI 2 spec indicates * that all of the previously transmitted messages must * be sent again, in the same order. Therefore, we * requeue all the previously transmitted messages, and * start again from the top. Our simple priority * scheme keeps the messages in the right order. */ AIC_MISC(("retransmitting ")); sc->sc_msgpriq |= sc->sc_msgoutq; /* * Set ATN. If we're just sending a trivial 1-byte * message, we'll clear ATN later on anyway. */ bus_space_write_1(iot, ioh, SCSISIG, PH_MSGOUT | ATNO); } else { /* This is a continuation of the previous message. */ n = sc->sc_omp - sc->sc_omess; goto nextbyte; } } /* No messages transmitted so far. */ sc->sc_msgoutq = 0; sc->sc_lastmsg = 0; nextmsg: /* Pick up highest priority message. */ sc->sc_currmsg = sc->sc_msgpriq & -sc->sc_msgpriq; sc->sc_msgpriq &= ~sc->sc_currmsg; sc->sc_msgoutq |= sc->sc_currmsg; /* Build the outgoing message data. */ switch (sc->sc_currmsg) { case SEND_IDENTIFY: AIC_ASSERT(sc->sc_nexus != NULL); sc->sc_omess[0] = MSG_IDENTIFY(sc->sc_nexus->xs->xs_periph->periph_lun, 1); n = 1; break; #if AIC_USE_SYNCHRONOUS case SEND_SDTR: AIC_ASSERT(sc->sc_nexus != NULL); ti = &sc->sc_tinfo[sc->sc_nexus->xs->xs_periph->periph_target]; sc->sc_omess[4] = MSG_EXTENDED; sc->sc_omess[3] = 3; sc->sc_omess[2] = MSG_EXT_SDTR; sc->sc_omess[1] = ti->period >> 2; sc->sc_omess[0] = ti->offset; n = 5; break; #endif #if AIC_USE_WIDE case SEND_WDTR: AIC_ASSERT(sc->sc_nexus != NULL); ti = &sc->sc_tinfo[sc->sc_nexus->xs->xs_periph->periph_target]; sc->sc_omess[3] = MSG_EXTENDED; sc->sc_omess[2] = 2; sc->sc_omess[1] = MSG_EXT_WDTR; sc->sc_omess[0] = ti->width; n = 4; break; #endif case SEND_DEV_RESET: sc->sc_flags |= AIC_ABORTING; sc->sc_omess[0] = MSG_BUS_DEV_RESET; n = 1; break; case SEND_REJECT: sc->sc_omess[0] = MSG_MESSAGE_REJECT; n = 1; break; case SEND_PARITY_ERROR: sc->sc_omess[0] = MSG_PARITY_ERROR; n = 1; break; case SEND_INIT_DET_ERR: sc->sc_omess[0] = MSG_INITIATOR_DET_ERR; n = 1; break; case SEND_ABORT: sc->sc_flags |= AIC_ABORTING; sc->sc_omess[0] = MSG_ABORT; n = 1; break; default: printf("%s: unexpected MESSAGE OUT; sending NOOP\n", sc->sc_dev.dv_xname); AIC_BREAK(); sc->sc_omess[0] = MSG_NOOP; n = 1; break; } sc->sc_omp = &sc->sc_omess[n]; nextbyte: /* Send message bytes. */ for (;;) { for (;;) { sstat1 = bus_space_read_1(iot, ioh, SSTAT1); if ((sstat1 & (REQINIT | PHASECHG | BUSFREE)) != 0) break; /* Wait for REQINIT. XXX Need timeout. */ } if ((sstat1 & (PHASECHG | BUSFREE)) != 0) { /* * Target left MESSAGE OUT, possibly to reject * our message. * * If this is the last message being sent, then we * deassert ATN, since either the target is going to * ignore this message, or it's going to ask for a * retransmission via MESSAGE PARITY ERROR (in which * case we reassert ATN anyway). */ if (sc->sc_msgpriq == 0) bus_space_write_1(iot, ioh, CLRSINT1, CLRATNO); goto out; } /* Clear ATN before last byte if this is the last message. */ if (n == 1 && sc->sc_msgpriq == 0) bus_space_write_1(iot, ioh, CLRSINT1, CLRATNO); /* Send message byte. */ bus_space_write_1(iot, ioh, SCSIDAT, *--sc->sc_omp); --n; /* Keep track of the last message we've sent any bytes of. */ sc->sc_lastmsg = sc->sc_currmsg; /* Wait for ACK to be negated. XXX Need timeout. */ while ((bus_space_read_1(iot, ioh, SCSISIG) & ACKI) != 0) ; if (n == 0) break; } /* We get here only if the entire message has been transmitted. */ if (sc->sc_msgpriq != 0) { /* There are more outgoing messages. */ goto nextmsg; } /* * The last message has been transmitted. We need to remember the last * message transmitted (in case the target switches to MESSAGE IN phase * and sends a MESSAGE REJECT), and the list of messages transmitted * this time around (in case the target stays in MESSAGE OUT phase to * request a retransmit). */ out: /* Disable REQ/ACK protocol. */ bus_space_write_1(iot, ioh, SXFRCTL0, CHEN); } /* aic_dataout_pio: perform a data transfer using the FIFO datapath in the * aic6360 * Precondition: The SCSI bus should be in the DOUT phase, with REQ asserted * and ACK deasserted (i.e. waiting for a data byte) * This new revision has been optimized (I tried) to make the common case fast, * and the rarer cases (as a result) somewhat more comlex */ int aic_dataout_pio(struct aic_softc *sc, u_char *p, int n) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_char dmastat = 0; int out = 0; #define DOUTAMOUNT 128 /* Full FIFO */ AIC_MISC(("%02x%02x ", bus_space_read_1(iot, ioh, FIFOSTAT), bus_space_read_1(iot, ioh, SSTAT2))); /* Clear host FIFO and counter. */ bus_space_write_1(iot, ioh, DMACNTRL0, RSTFIFO | WRITE); /* Enable FIFOs. */ bus_space_write_1(iot, ioh, DMACNTRL0, ENDMA | DWORDPIO | WRITE); bus_space_write_1(iot, ioh, SXFRCTL0, SCSIEN | DMAEN | CHEN); /* Turn off ENREQINIT for now. */ bus_space_write_1(iot, ioh, SIMODE1, ENSCSIRST | ENSCSIPERR | ENBUSFREE | ENPHASECHG); /* I have tried to make the main loop as tight as possible. This * means that some of the code following the loop is a bit more * complex than otherwise. */ while (n > 0) { for (;;) { dmastat = bus_space_read_1(iot, ioh, DMASTAT); if ((dmastat & (DFIFOEMP | INTSTAT)) != 0) break; } if ((dmastat & INTSTAT) != 0) goto phasechange; if (n >= DOUTAMOUNT) { n -= DOUTAMOUNT; out += DOUTAMOUNT; #if AIC_USE_DWORDS bus_space_write_multi_4(iot, ioh, DMADATALONG, (u_int32_t *) p, DOUTAMOUNT >> 2); #else bus_space_write_multi_2(iot, ioh, DMADATA, (u_int16_t *) p, DOUTAMOUNT >> 1); #endif p += DOUTAMOUNT; } else { int xfer; xfer = n; AIC_MISC(("%d> ", xfer)); n -= xfer; out += xfer; #if AIC_USE_DWORDS if (xfer >= 12) { bus_space_write_multi_4(iot, ioh, DMADATALONG, (u_int32_t *) p, xfer >> 2); p += xfer & ~3; xfer &= 3; } #else if (xfer >= 8) { bus_space_write_multi_2(iot, ioh, DMADATA, (u_int16_t *) p, xfer >> 1); p += xfer & ~1; xfer &= 1; } #endif if (xfer > 0) { bus_space_write_1(iot, ioh, DMACNTRL0, ENDMA | B8MODE | WRITE); bus_space_write_multi_1(iot, ioh, DMADATA, p, xfer); p += xfer; bus_space_write_1(iot, ioh, DMACNTRL0, ENDMA | DWORDPIO | WRITE); } } } if (out == 0) { bus_space_write_1(iot, ioh, SXFRCTL1, BITBUCKET); for (;;) { if ((bus_space_read_1(iot, ioh, DMASTAT) & INTSTAT) != 0) break; } bus_space_write_1(iot, ioh, SXFRCTL1, 0); AIC_MISC(("extra data ")); } else { /* See the bytes off chip */ for (;;) { dmastat = bus_space_read_1(iot, ioh, DMASTAT); if ((dmastat & INTSTAT) != 0) goto phasechange; if ((dmastat & DFIFOEMP) != 0 && (bus_space_read_1(iot, ioh, SSTAT2) & SEMPTY) != 0) break; } } phasechange: if ((dmastat & INTSTAT) != 0) { /* Some sort of phase change. */ int amount; /* Stop transfers, do some accounting */ amount = bus_space_read_1(iot, ioh, FIFOSTAT) + (bus_space_read_1(iot, ioh, SSTAT2) & 15); if (amount > 0) { out -= amount; bus_space_write_1(iot, ioh, DMACNTRL0, RSTFIFO | WRITE); bus_space_write_1(iot, ioh, SXFRCTL0, CHEN | CLRCH); AIC_MISC(("+%d ", amount)); } } /* Turn on ENREQINIT again. */ bus_space_write_1(iot, ioh, SIMODE1, ENSCSIRST | ENSCSIPERR | ENBUSFREE | ENREQINIT | ENPHASECHG); /* Stop the FIFO data path. */ bus_space_write_1(iot, ioh, SXFRCTL0, CHEN); bus_space_write_1(iot, ioh, DMACNTRL0, 0); return out; } /* aic_datain_pio: perform data transfers using the FIFO datapath in the * aic6360 * Precondition: The SCSI bus should be in the DIN phase, with REQ asserted * and ACK deasserted (i.e. at least one byte is ready). * For now, uses a pretty dumb algorithm, hangs around until all data has been * transferred. This, is OK for fast targets, but not so smart for slow * targets which don't disconnect or for huge transfers. */ int aic_datain_pio(struct aic_softc *sc, u_char *p, int n) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_char dmastat; int in = 0; #define DINAMOUNT 128 /* Full FIFO */ AIC_MISC(("%02x%02x ", bus_space_read_1(iot, ioh, FIFOSTAT), bus_space_read_1(iot, ioh, SSTAT2))); /* Clear host FIFO and counter. */ bus_space_write_1(iot, ioh, DMACNTRL0, RSTFIFO); /* Enable FIFOs. */ bus_space_write_1(iot, ioh, DMACNTRL0, ENDMA | DWORDPIO); bus_space_write_1(iot, ioh, SXFRCTL0, SCSIEN | DMAEN | CHEN); /* Turn off ENREQINIT for now. */ bus_space_write_1(iot, ioh, SIMODE1, ENSCSIRST | ENSCSIPERR | ENBUSFREE | ENPHASECHG); /* We leave this loop if one or more of the following is true: * a) phase != PH_DATAIN && FIFOs are empty * b) SCSIRSTI is set (a reset has occurred) or busfree is detected. */ while (n > 0) { /* Wait for fifo half full or phase mismatch */ for (;;) { dmastat = bus_space_read_1(iot, ioh, DMASTAT); if ((dmastat & (DFIFOFULL | INTSTAT)) != 0) break; } if ((dmastat & DFIFOFULL) != 0) { n -= DINAMOUNT; in += DINAMOUNT; #if AIC_USE_DWORDS bus_space_read_multi_4(iot, ioh, DMADATALONG, (u_int32_t *) p, DINAMOUNT >> 2); #else bus_space_read_multi_2(iot, ioh, DMADATA, (u_int16_t *) p, DINAMOUNT >> 1); #endif p += DINAMOUNT; } else { int xfer; xfer = min(bus_space_read_1(iot, ioh, FIFOSTAT), n); AIC_MISC((">%d ", xfer)); n -= xfer; in += xfer; #if AIC_USE_DWORDS if (xfer >= 12) { bus_space_read_multi_4(iot, ioh, DMADATALONG, (u_int32_t *) p, xfer >> 2); p += xfer & ~3; xfer &= 3; } #else if (xfer >= 8) { bus_space_read_multi_2(iot, ioh, DMADATA, (u_int16_t *) p, xfer >> 1); p += xfer & ~1; xfer &= 1; } #endif if (xfer > 0) { bus_space_write_1(iot, ioh, DMACNTRL0, ENDMA | B8MODE); bus_space_read_multi_1(iot, ioh, DMADATA, p, xfer); p += xfer; bus_space_write_1(iot, ioh, DMACNTRL0, ENDMA | DWORDPIO); } } if ((dmastat & INTSTAT) != 0) goto phasechange; } /* Some SCSI-devices are rude enough to transfer more data than what * was requested, e.g. 2048 bytes from a CD-ROM instead of the * requested 512. Test for progress, i.e. real transfers. If no real * transfers have been performed (n is probably already zero) and the * FIFO is not empty, waste some bytes.... */ if (in == 0) { bus_space_write_1(iot, ioh, SXFRCTL1, BITBUCKET); for (;;) { if ((bus_space_read_1(iot, ioh, DMASTAT) & INTSTAT) != 0) break; } bus_space_write_1(iot, ioh, SXFRCTL1, 0); AIC_MISC(("extra data ")); } phasechange: /* Turn on ENREQINIT again. */ bus_space_write_1(iot, ioh, SIMODE1, ENSCSIRST | ENSCSIPERR | ENBUSFREE | ENREQINIT | ENPHASECHG); /* Stop the FIFO data path. */ bus_space_write_1(iot, ioh, SXFRCTL0, CHEN); bus_space_write_1(iot, ioh, DMACNTRL0, 0); return in; } /* * This is the workhorse routine of the driver. * Deficiencies (for now): * 1) always uses programmed I/O */ int aicintr(void *arg) { struct aic_softc *sc = arg; bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; u_char sstat0, sstat1; struct aic_acb *acb; struct scsipi_periph *periph; struct aic_tinfo *ti; int n; if ((sc->sc_dev.dv_flags & DVF_ACTIVE) == 0) return (0); /* * Clear INTEN. We enable it again before returning. This makes the * interrupt esssentially level-triggered. */ bus_space_write_1(iot, ioh, DMACNTRL0, 0); AIC_TRACE(("aicintr ")); loop: /* * First check for abnormal conditions, such as reset. */ sstat1 = bus_space_read_1(iot, ioh, SSTAT1); AIC_MISC(("sstat1:0x%02x ", sstat1)); if ((sstat1 & SCSIRSTI) != 0) { printf("%s: SCSI bus reset\n", sc->sc_dev.dv_xname); goto reset; } /* * Check for less serious errors. */ if ((sstat1 & SCSIPERR) != 0) { printf("%s: SCSI bus parity error\n", sc->sc_dev.dv_xname); bus_space_write_1(iot, ioh, CLRSINT1, CLRSCSIPERR); if (sc->sc_prevphase == PH_MSGIN) { sc->sc_flags |= AIC_DROP_MSGIN; aic_sched_msgout(sc, SEND_PARITY_ERROR); } else aic_sched_msgout(sc, SEND_INIT_DET_ERR); } /* * If we're not already busy doing something test for the following * conditions: * 1) We have been reselected by something * 2) We have selected something successfully * 3) Our selection process has timed out * 4) This is really a bus free interrupt just to get a new command * going? * 5) Spurious interrupt? */ switch (sc->sc_state) { case AIC_IDLE: case AIC_SELECTING: sstat0 = bus_space_read_1(iot, ioh, SSTAT0); AIC_MISC(("sstat0:0x%02x ", sstat0)); if ((sstat0 & TARGET) != 0) { /* * We don't currently support target mode. */ printf("%s: target mode selected; going to BUS FREE\n", sc->sc_dev.dv_xname); bus_space_write_1(iot, ioh, SCSISIG, 0); goto sched; } else if ((sstat0 & SELDI) != 0) { AIC_MISC(("reselected ")); /* * If we're trying to select a target ourselves, * push our command back into the ready list. */ if (sc->sc_state == AIC_SELECTING) { AIC_MISC(("backoff selector ")); AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; sc->sc_nexus = NULL; TAILQ_INSERT_HEAD(&sc->ready_list, acb, chain); } /* Save reselection ID. */ sc->sc_selid = bus_space_read_1(iot, ioh, SELID); sc->sc_state = AIC_RESELECTED; } else if ((sstat0 & SELDO) != 0) { AIC_MISC(("selected ")); /* We have selected a target. Things to do: * a) Determine what message(s) to send. * b) Verify that we're still selecting the target. * c) Mark device as busy. */ if (sc->sc_state != AIC_SELECTING) { printf("%s: selection out while idle; " "resetting\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto reset; } AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; periph = acb->xs->xs_periph; ti = &sc->sc_tinfo[periph->periph_target]; sc->sc_msgpriq = SEND_IDENTIFY; if (acb->flags & ACB_RESET) sc->sc_msgpriq |= SEND_DEV_RESET; else if (acb->flags & ACB_ABORT) sc->sc_msgpriq |= SEND_ABORT; else { #if AIC_USE_SYNCHRONOUS if ((ti->flags & DO_SYNC) != 0) sc->sc_msgpriq |= SEND_SDTR; #endif #if AIC_USE_WIDE if ((ti->flags & DO_WIDE) != 0) sc->sc_msgpriq |= SEND_WDTR; #endif } acb->flags |= ACB_NEXUS; ti->lubusy |= (1 << periph->periph_lun); /* Do an implicit RESTORE POINTERS. */ sc->sc_dp = acb->data_addr; sc->sc_dleft = acb->data_length; sc->sc_cp = (u_char *)&acb->scsipi_cmd; sc->sc_cleft = acb->scsipi_cmd_length; /* On our first connection, schedule a timeout. */ if ((acb->xs->xs_control & XS_CTL_POLL) == 0) callout_reset(&acb->xs->xs_callout, mstohz(acb->timeout), aic_timeout, acb); sc->sc_state = AIC_CONNECTED; } else if ((sstat1 & SELTO) != 0) { AIC_MISC(("selection timeout ")); if (sc->sc_state != AIC_SELECTING) { printf("%s: selection timeout while idle; " "resetting\n", sc->sc_dev.dv_xname); AIC_BREAK(); goto reset; } AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; bus_space_write_1(iot, ioh, SXFRCTL1, 0); bus_space_write_1(iot, ioh, SCSISEQ, ENRESELI); bus_space_write_1(iot, ioh, CLRSINT1, CLRSELTIMO); delay(250); acb->xs->error = XS_SELTIMEOUT; goto finish; } else { if (sc->sc_state != AIC_IDLE) { printf("%s: BUS FREE while not idle; " "state=%d\n", sc->sc_dev.dv_xname, sc->sc_state); AIC_BREAK(); goto out; } goto sched; } /* * Turn off selection stuff, and prepare to catch bus free * interrupts, parity errors, and phase changes. */ bus_space_write_1(iot, ioh, SXFRCTL0, CHEN | CLRSTCNT | CLRCH); bus_space_write_1(iot, ioh, SXFRCTL1, 0); bus_space_write_1(iot, ioh, SCSISEQ, ENAUTOATNP); bus_space_write_1(iot, ioh, CLRSINT0, CLRSELDI | CLRSELDO); bus_space_write_1(iot, ioh, CLRSINT1, CLRBUSFREE | CLRPHASECHG); bus_space_write_1(iot, ioh, SIMODE0, 0); bus_space_write_1(iot, ioh, SIMODE1, ENSCSIRST | ENSCSIPERR | ENBUSFREE | ENREQINIT | ENPHASECHG); sc->sc_flags = 0; sc->sc_prevphase = PH_INVALID; goto dophase; } if ((sstat1 & BUSFREE) != 0) { /* We've gone to BUS FREE phase. */ bus_space_write_1(iot, ioh, CLRSINT1, CLRBUSFREE | CLRPHASECHG); switch (sc->sc_state) { case AIC_RESELECTED: goto sched; case AIC_CONNECTED: AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; #if AIC_USE_SYNCHRONOUS + AIC_USE_WIDE if (sc->sc_prevphase == PH_MSGOUT) { /* * If the target went to BUS FREE phase during * or immediately after sending a SDTR or WDTR * message, disable negotiation. */ periph = acb->xs->xs_periph; ti = &sc->sc_tinfo[periph->periph_target]; switch (sc->sc_lastmsg) { #if AIC_USE_SYNCHRONOUS case SEND_SDTR: ti->flags &= ~DO_SYNC; ti->period = ti->offset = 0; break; #endif #if AIC_USE_WIDE case SEND_WDTR: ti->flags &= ~DO_WIDE; ti->width = 0; break; #endif } } #endif if ((sc->sc_flags & AIC_ABORTING) == 0) { /* * Section 5.1.1 of the SCSI 2 spec suggests * issuing a REQUEST SENSE following an * unexpected disconnect. Some devices go into * a contingent allegiance condition when * disconnecting, and this is necessary to * clean up their state. */ printf("%s: unexpected disconnect; " "sending REQUEST SENSE\n", sc->sc_dev.dv_xname); AIC_BREAK(); aic_sense(sc, acb); goto out; } acb->xs->error = XS_DRIVER_STUFFUP; goto finish; case AIC_DISCONNECT: AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; #if 1 /* XXXX */ acb->data_addr = sc->sc_dp; acb->data_length = sc->sc_dleft; #endif TAILQ_INSERT_HEAD(&sc->nexus_list, acb, chain); sc->sc_nexus = NULL; goto sched; case AIC_CMDCOMPLETE: AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; goto finish; } } bus_space_write_1(iot, ioh, CLRSINT1, CLRPHASECHG); dophase: if ((sstat1 & REQINIT) == 0) { /* Wait for REQINIT. */ goto out; } sc->sc_phase = bus_space_read_1(iot, ioh, SCSISIG) & PH_MASK; bus_space_write_1(iot, ioh, SCSISIG, sc->sc_phase); switch (sc->sc_phase) { case PH_MSGOUT: if (sc->sc_state != AIC_CONNECTED && sc->sc_state != AIC_RESELECTED) break; aic_msgout(sc); sc->sc_prevphase = PH_MSGOUT; goto loop; case PH_MSGIN: if (sc->sc_state != AIC_CONNECTED && sc->sc_state != AIC_RESELECTED) break; aic_msgin(sc); sc->sc_prevphase = PH_MSGIN; goto loop; case PH_CMD: if (sc->sc_state != AIC_CONNECTED) break; #if AIC_DEBUG if ((aic_debug & AIC_SHOWMISC) != 0) { AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; printf("cmd=0x%02x+%d ", acb->scsipi_cmd.opcode, acb->scsipi_cmd_length-1); } #endif n = aic_dataout_pio(sc, sc->sc_cp, sc->sc_cleft); sc->sc_cp += n; sc->sc_cleft -= n; sc->sc_prevphase = PH_CMD; goto loop; case PH_DATAOUT: if (sc->sc_state != AIC_CONNECTED) break; AIC_MISC(("dataout %ld ", (long)sc->sc_dleft)); n = aic_dataout_pio(sc, sc->sc_dp, sc->sc_dleft); sc->sc_dp += n; sc->sc_dleft -= n; sc->sc_prevphase = PH_DATAOUT; goto loop; case PH_DATAIN: if (sc->sc_state != AIC_CONNECTED) break; AIC_MISC(("datain %ld ", (long)sc->sc_dleft)); n = aic_datain_pio(sc, sc->sc_dp, sc->sc_dleft); sc->sc_dp += n; sc->sc_dleft -= n; sc->sc_prevphase = PH_DATAIN; goto loop; case PH_STAT: if (sc->sc_state != AIC_CONNECTED) break; AIC_ASSERT(sc->sc_nexus != NULL); acb = sc->sc_nexus; bus_space_write_1(iot, ioh, SXFRCTL0, CHEN | SPIOEN); acb->target_stat = bus_space_read_1(iot, ioh, SCSIDAT); bus_space_write_1(iot, ioh, SXFRCTL0, CHEN); AIC_MISC(("target_stat=0x%02x ", acb->target_stat)); sc->sc_prevphase = PH_STAT; goto loop; } printf("%s: unexpected bus phase; resetting\n", sc->sc_dev.dv_xname); AIC_BREAK(); reset: aic_init(sc, 1); return 1; finish: callout_stop(&acb->xs->xs_callout); aic_done(sc, acb); goto out; sched: sc->sc_state = AIC_IDLE; aic_sched(sc); goto out; out: bus_space_write_1(iot, ioh, DMACNTRL0, INTEN); return 1; } void aic_abort(struct aic_softc *sc, struct aic_acb *acb) { /* 2 secs for the abort */ acb->timeout = AIC_ABORT_TIMEOUT; acb->flags |= ACB_ABORT; if (acb == sc->sc_nexus) { /* * If we're still selecting, the message will be scheduled * after selection is complete. */ if (sc->sc_state == AIC_CONNECTED) aic_sched_msgout(sc, SEND_ABORT); } else { aic_dequeue(sc, acb); TAILQ_INSERT_HEAD(&sc->ready_list, acb, chain); if (sc->sc_state == AIC_IDLE) aic_sched(sc); } } void aic_timeout(void *arg) { struct aic_acb *acb = arg; struct scsipi_xfer *xs = acb->xs; struct scsipi_periph *periph = xs->xs_periph; struct aic_softc *sc = (void *)periph->periph_channel->chan_adapter->adapt_dev; int s; scsipi_printaddr(periph); printf("timed out"); s = splbio(); if (acb->flags & ACB_ABORT) { /* abort timed out */ printf(" AGAIN\n"); /* XXX Must reset! */ } else { /* abort the operation that has timed out */ printf("\n"); acb->xs->error = XS_TIMEOUT; aic_abort(sc, acb); } splx(s); } #ifdef AIC_DEBUG /* * The following functions are mostly used for debugging purposes, either * directly called from the driver or from the kernel debugger. */ void aic_show_scsi_cmd(struct aic_acb *acb) { u_char *b = (u_char *)&acb->scsipi_cmd; struct scsipi_periph *periph = acb->xs->xs_periph; int i; scsipi_printaddr(periph); if ((acb->xs->xs_control & XS_CTL_RESET) == 0) { for (i = 0; i < acb->scsipi_cmd_length; i++) { if (i) printf(","); printf("%x", b[i]); } printf("\n"); } else printf("RESET\n"); } void aic_print_acb(struct aic_acb *acb) { printf("acb@%p xs=%p flags=%x", acb, acb->xs, acb->flags); printf(" dp=%p dleft=%d target_stat=%x\n", acb->data_addr, acb->data_length, acb->target_stat); aic_show_scsi_cmd(acb); } void aic_print_active_acb(void) { extern struct cfdriver aic_cd; struct aic_acb *acb; struct aic_softc *sc = aic_cd.cd_devs[0]; printf("ready list:\n"); for (acb = sc->ready_list.tqh_first; acb != NULL; acb = acb->chain.tqe_next) aic_print_acb(acb); printf("nexus:\n"); if (sc->sc_nexus != NULL) aic_print_acb(sc->sc_nexus); printf("nexus list:\n"); for (acb = sc->nexus_list.tqh_first; acb != NULL; acb = acb->chain.tqe_next) aic_print_acb(acb); } void aic_dump6360(struct aic_softc *sc) { bus_space_tag_t iot = sc->sc_iot; bus_space_handle_t ioh = sc->sc_ioh; printf("aic6360: SCSISEQ=%x SXFRCTL0=%x SXFRCTL1=%x SCSISIG=%x\n", bus_space_read_1(iot, ioh, SCSISEQ), bus_space_read_1(iot, ioh, SXFRCTL0), bus_space_read_1(iot, ioh, SXFRCTL1), bus_space_read_1(iot, ioh, SCSISIG)); printf(" SSTAT0=%x SSTAT1=%x SSTAT2=%x SSTAT3=%x SSTAT4=%x\n", bus_space_read_1(iot, ioh, SSTAT0), bus_space_read_1(iot, ioh, SSTAT1), bus_space_read_1(iot, ioh, SSTAT2), bus_space_read_1(iot, ioh, SSTAT3), bus_space_read_1(iot, ioh, SSTAT4)); printf(" SIMODE0=%x SIMODE1=%x DMACNTRL0=%x DMACNTRL1=%x " "DMASTAT=%x\n", bus_space_read_1(iot, ioh, SIMODE0), bus_space_read_1(iot, ioh, SIMODE1), bus_space_read_1(iot, ioh, DMACNTRL0), bus_space_read_1(iot, ioh, DMACNTRL1), bus_space_read_1(iot, ioh, DMASTAT)); printf(" FIFOSTAT=%d SCSIBUS=0x%x\n", bus_space_read_1(iot, ioh, FIFOSTAT), bus_space_read_1(iot, ioh, SCSIBUS)); } void aic_dump_driver(struct aic_softc *sc) { struct aic_tinfo *ti; int i; printf("nexus=%p prevphase=%x\n", sc->sc_nexus, sc->sc_prevphase); printf("state=%x msgin=%x msgpriq=%x msgoutq=%x lastmsg=%x " "currmsg=%x\n", sc->sc_state, sc->sc_imess[0], sc->sc_msgpriq, sc->sc_msgoutq, sc->sc_lastmsg, sc->sc_currmsg); for (i = 0; i < 7; i++) { ti = &sc->sc_tinfo[i]; printf("tinfo%d: %d cmds %d disconnects %d timeouts", i, ti->cmds, ti->dconns, ti->touts); printf(" %d senses flags=%x\n", ti->senses, ti->flags); } } #endif